Prod Order Type - do not explode bom
Hi Gurus,
Can we set a certain order type not to explode bom at order creation? Thanks for the advice!
Regards,
Manoj
I thnk you may create an alternative BOM which does not contain any components and select it for the order type, please go to customization OPL8, there is a field for BOM application for certain order type.
Then, go to customization Production > Basic Data > Bill of material > Aternative determination, there are 3 transactions for determining BOMs associate with BOM application (e.g. selection ID etc), please try if you can confirue them to have the system select the alternative BOM.
Similar Messages
-
Service/maintenance order type SM01 not completely maintained in plant 1001
Dear All,
Am trying to configure Service Management where there is a scenario in which , when the user creates a Sales order for a installation item say TV or Fridge, automatically Service order has to be generated.
I have checked all the item Category Settings but am getting an error
Service/maintenance order type SM01 not completely maintained in plant 1001
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant.
Can anyone throw some light on this as i know you would have faced this problem.
SatishNothing
-
Service/maintenance order type SM03 not completely maintained in plant 1000
Dear experts,
when I use T-code:iw31 create a service order,It show the following error message:
Service/maintenance order type SM03 not completely maintained in plant 1000
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant.
Best regards,
LanceHello,
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Assign order types to maintenance plants.
Maintain the order type SM03 against the plant.
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Completion confirmations --> Define the parameters for completion confirmations.
These both should be done, try to raise the SM03 order now.
PRase -
Service/Maintenace Order type ZMSO not completely maintained for plant SE50
Hi All,
Am trying to create a Service Order with T.Code IW31 and after entering the order type, priority, Llyods code, Plant and Bus.Area and press enter I got error " Service/Maintenace Order type ZMSO not completely maintained for plant SE50 "
Diagnosis:
For the selected order type and plant, no check control is maintained in
Plant Maintenance/Service in 'Availability Check for Materials, PRTs and
Capacities'.
Procedure
A check control must be maintained for this combination of order type
and plant.
Please suggest me what should I do in this case as my knowledge in CS is zero.
Awaiting your replies,
Thanks in advance,
Regards,
Anil.Hi Anilku,
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Assign order types to maintenance plants.
Maintain the order type ZMSO against the plant.
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Completion confirmations --> Define the parameters for completion confirmations.
Thanks,
Swamy H P -
Order type is not picking while converison Plnd to process order
Dear Dudes,
i have maintained production scheduling profile in all material masters in which order type is specified. while converting planned order to process order order type is not picking.
thanks in advance.Robert,
Since you are using same order type for both MTS & MTO, you can define this order type "PI01" in the MRP plant parameters using transaction OPPQ in the Conversion of Planned order section.
I am not sure, why production scheduling profile is not working for you, hope you are using the Production scheduling profile configured using CORY transaction check this part alone.
Regards,
Prasobh -
Order types, why do we need to create our order types and not use the stand
HI
Order types, why do we need to create our order types and not use the standard ones during implementation.Hi Raj,
Well there is no hard and fast rule that you have to copy nad create a new order type. Its just to meet our own requirements that we copy the standard and make the changes if required to meet our business needs.
And by this way we keep unchanged the standard order type for further use.
If you are sure that the standard order type satisfies your need you can directly use that only.
I hope this clarifies the issue.
Do reward if find useful
Regards,
Abhi -
Order type has not been defined in sales area '1000','10','00'
Hi Gurus
I am getting this error when try to create order
Order type has not been defined in sales area <'1000','10','00'>
but I checked in the configuration and assigned
SPRO:SALES:SALES : DOCUMENTS :SALE3S DOCUMENTS HEADER:
ASSIGN SALES DOCUMENT TYPES : Assign sales order types permitted for sales are :1000 -10-00
But still I am getting this problem when trying to creates sales order from va01.
Thanks
KrisSPRO --> Sales & Sistribution --> Sales --> Sales Document Header --> Assign Sales Area to Sales Document Type
The above is one option.
Also Check Sales Document Type in T.Vode: VOV8
SPRO --> Sales & Sistribution --> Sales --> Sales Document Type
whether The Sales Document Type is Block, which could also be a possible reason.
Also check the Sales Area setting.
Regards,
Rajesh Banka
Reward points if useful. -
Change pointer triggers for one order type but not for other with LOIPRO
Hi all,
We have old production order type ZP01 since last 3 years. Idoc LOIPRO are triggered properly. Now we introduced new production order type ZP02, but idocs are not triggereing for these prod. orders. They both are production orders with different order types but same message type LOIPRO
I noticed that change pointers are not getting written to CDHDR and CDPOS for this new order type. For old order type they are getting written to CDHDR/CDPOS. Does any one know where is the issue in config.
Currently BD52 contains following entries for LOIPRO
ORDER-AFKO-AUFNR
ORDER-AFKO-KEY.
Thanks in advanceAnyone with an idea.
The project went live by using RCCLORD or RCCLTRAN, but still the same orders keep triggering. How do we restrict the already processed production orders. -
Prod Order Type Automatic selection
Dear Sir,
In MTO, after MRP run, during the conversion of planned order to production order, how system detect the production order type automatically if I have more that one production order type.
Thanks and Regards,
ChetanDear Chetan,
1.Check if the production scheduling profile/production scheduler has been assigned in the material master.
2.If only production scheduler has been maintained means,then in OPJ9,check whether this prod.scheduler has been linked to
prod scheduling profile(through which the default order type can be set),if only prod scheduling profile means then directly check
in OPKP for this profile what is the order type.
3.IF no prod.scheduler/prod scheduling profile has been maintained means check whether any MRP group has been assigned in
MRP1 view which has the default production order type settings in OPPR.
Check and revert back
Regards
Mangalraj.S
Edited by: Mangalraj.S on Aug 22, 2011 12:37 PM -
Order type PM03 Not allowed in IW31 to create
Hello,
I need to stop creating in order type PM03 in IW31 since it is created in background job.
and i have another order type and assigned to roles so I am not able to use the role control for this.
is there any other user exit for this?
ShriThe following code in userExit IWO10009 (Include ZXWOCU07) , will not allow PM03 Orders created directly.
IF SY-TCODE = 'IW31' AND CAUFVD_IMP-AUART = 'PM03'.
MESSAGE: 'Direct Order Creation not allowed for PM03 Order type' TYPE 'E' DISPLAY LIKE 'I'.
ENDIF.
Note that this is prevented at the time of saving the Order. The error you get is
KJogeswaraRao -
ERP Sales Orders Types are not visible in CRM WebUI ! ! ! !
Hi All
I am working on CRM 7.0 IDES, I am trying to create an ERP sales order but when I chose create ERP sales order a popup menu with no document types so I am not able to chose the Sales order document type, the CRM and ERP are integrated and the ERP sales Profile is maintained and assigned is there more settings should be done to make them visible?
Regards
Jacopo FrancoiseHi Jacopo Francoise,
Check for the customization in Tr. SPRO path IMG-> CRM->Transactions->Settings for ERP Transactions maintained via CRM.
You should define the ERP sales order profile with your ECC system RFC details. Also read the documents available there.
Hope this will help.
Thanks,
Vikash. -
BOM not exploding for CR doc. type while creating sales order.
Hi Experts,
I have a problem in BOM. When created the BOM with sales doc. type OR, then BOM exploding as usual and picking pricing for main item.. But when I tried for sales doc. type CR, then the BOM is not being exploding and also pricing is also not picking. Can any one help me for this problem.
Thanks in advance,
Raksha.Hi,
Go to VTAF billing to sales document copy control and check below settings:
Header:
Data Transfer -052 Billing doc header
Data Transfer Buis - 103 Billing bus header data
Data Transfer Part - Billing Header Partner
Copying requirements - 021 Billing Header
Check Copy item number
Uncheck complete reference
Item:
Item Cat proposal G2N Request
Item TAN - Standard item
Data Transfer -153 item from Billing doc
Data Transfer Buis - 104 Billing bus Item data
Data Transfer Part - 004 Billing Item Partner
bl.pl - Leave it blank
Copying requirements - 303 Billing Header
uncheck copy schedule lines and do not copy batch
check update document flow
Pricing type - D
Leave blank - Campaign Deter.
Points to add: If you create without reference to an invoice then it would not explode BOM in RE return order because the configuration not set in REN item category.
As a standard business process return orders always create with reference to invoice.
regards
rc gopi -
BOM NOT Exploding in Sales Order
Hi,
I have created Sales BOM in CS01 and now while creating sales order it is not exploding.
can you please tell me how can i explode the same or why it is not exploding.
Also one more query, i have created sales orderBOM and have saved it. Now 1 item from it i dont want to deliver. Is it possible? Pricing of this BOM is at Item level.
Please advise.
ThanksVK,
The BOM is created for the finished material or semifinished material, for which sales is done. The bom is executed to make sure or find the material availability based on which this materials are passed to production.
In case of Sales BOM it is composition of materials that makes final or finished material. It is only an information to the customer that finished material is composed of these sub materials. If you go through Sales BOM article you will be clear. you use ERLA, if the material that you are issuing is completed (here price is calculated at the main item level) or you use LUMF if the material is not completed (here the price is calculated from sub item level).
So those items are subjected to delivery but not for deletion.
Regards
Sathya
Edited by: Sathya Pavan Yedavalli venkata on Mar 30, 2009 7:56 AM -
SG:50, Cannot convert planned orders to prod orders at BOM component level
Test scenario for Strategy Group 50 (Planning without final Assembly)
Product Structure
Material--> SG50.00 > FERT> (Strategy Group: 50)
Material---> SG50.02 --> HALB --->(Strategy Group: 40)
Material---> SG50.04 ---> ROH --->(Strategy Group: Blank)
Maintained PIRs and Ran MRP at the header level, Planned orders are created
with order type VP at levels of BOM structure. Thus cannot covert planned orders
to production orders without having sales order.
But my understanding of Strategy Group 50, is BOM components can be produced before hand (i.e.
before sales orders are recieved ). Now planned orders with order type VP not able to convert
planned orders to prod orders at BOM component levelStuti/Prasobh:
Thanks for your inputs, it answers my question
Intially maintained Individual/Collective indicator to "2" at header level (FERT), which is why all the planned orders are created with order type VP
Changed the Individual/Collective indicator to "blank " at header level (FERT), and maintained Individual/Collective indicator to "2" at component level
Reran the MRP (MDO2), with the following settings --> Delete and Recreate planning data and Check mark on Also plan on unchanged components
Able to see planned orders at component level with order type LA
Due points have been assigned -
Varient Configuration prod order is not picking the super routing operation
Dear Experts,
In varient configuration,I have maintain Super routing and Super bom for KMET material.While creation of prod order or converting plan order to prod order,Routing is not getting selected.I have maintained dependency and have checked Production sheduling profile,order type and order dependent parameter,all is ok.Even the Super Bom is getting selected after MRP run as per my requirment.
What I am not getting is selection of routing for production order.Can any of the expert help to find the missing link.
Regards,
Rajesh Prasad.Hi
For material Variant (FERT) production order Routing is not picking?Just check the Selection condition which is assigned to the operation is same as the selction of material variant i.e., Char & Char values has configured in MRP 3 View of Material variant.
Check this and revert back
Regards
Praveen
Maybe you are looking for
-
Solution for PS CS3 installation problem on Vista does not work.
I encountered the much discussed 2739 error when trying to install PS CS3 on Vista Ultimate. I followed the proposed solution. But instead of a dialog box I received the message: not recognized. I have the latest update of Java installed and I have I
-
HP LaserJet P1102w - Appears as offline every time I restart the computer
Hi all! As I wrote in the subject, I have a P1102w printer connected to two different computers (both with Win 7 64bits) in the same network through Wi-Fi. Everything always worked find until I started to have a problem in only one of those PCs: ever
-
Task properties - General task - Partner profile
Hi Experts, I'm using user decision step for manager approval, and in development server i've selected task as general task in task properties and everything was working fine in development server. When above workflow development transported to testi
-
Automatically Animating Spry Accordion Widget on Page Load
I've been searching and searching and still can't find a clue as how to make the Spry Accordion Widget automatically open the next panel. I want the panels to expand automatically and loop back at the last panel. Do I need to create another function
-
I am new to Motion and getting a pretty good handle on it, but I could work more efficiently if I knew some short-cuts. For example when I have a clip selected can I toggle back and forth from it's in and out points. In FCP I use Shift-I or O to do t