Prodcution Scheduling Profile for without material process order
Hello Gurus,
I am creating process order without material and assigning Production Scheduling Profile in assignment tab. Production Scheduling Profile has release on creation activated in configure, but when I save process order its not released, it remains as CRTD.
When I am creating process order with material as you know Production Scheduling Profile is copied from material master and when I save process order, its automatically released.
I am assigning same Production Scheduling Profile which I am using for second case listed above.
Any ideas?
Thanks
Bhavesh Patel
Dear Patel,
I Already told, once , you are in order screen, system status will set as CRTD, after that if U assigned, the PSP, It won't work, In case of COR1, material have PSP, If you convert planned order to production, release is triggered in background before the status is created.
If you have still doubt
Create a order in COR1, When you enter the quantity and start date finish date then release is carried out and the status is set as CRTD
in CORO
It is not possible to maintain PSP before entering the qty and Dates
Once U entered the dates, Sytem set the status as created, After you assigna PSP, It won't work
Regards,
Sundaresan
Edited by: Sundaresan . E. V on Sep 14, 2010 7:01 PM
Similar Messages
-
When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar -
Production scheduling profile for production order type 10 does not exist
Kindly suggest me how to resolve this error
Production scheduling profile for production order type 10 does not existHi Archana,
Go to material master-work scheduling view and check what is the production scheduling profile maintained for the same materisl -plant combination.
then go to OPKP and check if production scheduliong profile is maintained for relevent order type 10 in custmizing. If not maintain one and it should resolve the error. -
Unable to enter multiple Schedule lines for BOM material in Sales Order
Hi All,
We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
The schedule lines are greyed out, user was able to add schedule lines earlier.
I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
Please provide a solution for this.
PFB link in which similar situation posted in this community but the final resolution method is not discussed.
http://scn.sap.com/message/13201504#13201504
Regards,
SamikshHi Samiksh,
Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
With regards
S.Siva -
Maintenance of serial number profile for a material
Hi,
We need to maintain serial number profile for a material. Presently there exists stock for this material.
Could you please let us know the prerequisites for maintaining the serial number profile for a material where stock exists.
System should not allow to update the material with serial number profile if stock exists, since for the existing stock serial numbers are not available. But in our case, system is allowing to update the profile for the material where stock exists. Could you suggest if any setting/config is missing to throw an error.
Regards,
SrinivasI have the solution below.
- Don't change Serial no. profile
- Goods issue all stock with mvt 201 or 261 into temporary cost object and note your text.
- Change Serial no. profile in material master
- Goods receipt all stock (You may ref. material doc.) and you need to input serial number for all materials.
Hope this solution can help you.
Edited by: Saiyaman on Dec 9, 2009 5:33 PM -
Tolerance limit for Components in Process Order
Dear Friends,
As we can provide underdelivery / overdelivery tolerance for GR of process order, likewise is it possible to provide tolerance for BOM components in process order?
The requirement is like that confirmation should be allowed with GI done within + / - 5 % of BOM qty in process order. Is it possible to cater this requirement with any exit / BAdi?
Kindly help with your valuable inputs.
Thanks in advance.
Regards,
TejasDear,
Thanks for your prompt reply. Actually I have been already working on this exit only.But me & my technical fellow are stuck up for build logic for tolerance limit. It is working to restrict confirmation till GI has been done. But we are unable to give provision of tolerance limit for GI with this exit.
Can you pls share more details about writing logic for it?
Regards,
Tejas -
02 STO 's for a single process order
Hi All,
Can anyone explain me whether there any problem in getting two STO's for a single process order?
If its a problem how to generate only one STO for a one process order?Hi Mallika,
can you explain your sceanrio . i am not able to understand your requirement.....
Regards,
Venkat. -
How to find Missing Parts for a particular Process Order?
Hi,
How to find Missing Parts for a particular Process Order ?
Is there any function module or Table ??
Thnx in Advance.Hi prince roy
you can use the T-code = <b>CO24 - Missing Parts Info System</b>
if helpful PLEASE REWARD YOUR POINTS
thanks
chakri -
Ugent: How to restrict a Material Type for a Specific Process Order Type
Hi All
Can any one please tell me how to restrict material type for specific process order type
We have Process Order type ZPBS for finished materials but while creating process order
if i give the material of semi finished material type the system let me create the process order
it should not as we have a separate process order type for semi finished materials that is ZPBS.
And vice versa
Please help me how to restrict these material types for specific Process Order Types.
Points ll be awarded accordingly
Bilal AtharHy Ghulam Mohammad,
Good Morning,
Pls go through below link
[http://www.sap-img.com/abap/what-is-user-exits.htm]
[http://www.sap-basis-abap.com/sapab013.htm]
Now regarding How to place your checks in User Exit, then pls explain your requirements to your Abaper , so that he or she can write it into programeble language.
Regards,
Dhaval -
Basic and scheduling dates & time calculation in process order creation
Hi guru's,
i have one requirement, i need to calculate and display the basic and scheduled dates & times based on the given input i.e material , plant , process order type , quantity , UOM and scheduling type ( for corresponding scheduling type user will provide either start date or finish date ) using RFC. can u plz provide any function module for this purpose or logic for calculating the same , as i am working on version 4.7ee .
Awaiting for a quick response.
Regards,
MadanDear Rohan,
1.Check the length of break timings defined in the resource that is assigned in the phase.
2.Check in OPUZ whether for the process order type and plant combination whether scheduling is to include the break time also
(whether the check box for scheduling with breaks) is included.
Check and revert back.
Regards
Mangalraj.S -
Problem in automatic batch determination for components in process order
hi
Ours is a process order industry. Here we prepare food items.
We are entering manual batch for finished product. We want to perform automatic batch determination for one of the components raw material. For other packing material we do not want to maintain batches.
The batch procedure picked is me0001 for 261 movement type instead of C00001.
Because of that we need to enter batch manually.
Send us the procedure to automatic batch determination for components.
regards
raviRavi,
Before posting please do search in this forum because this topic has been discussed many times in past.
Please check below links which could be helpful to you Automatic batch determination in process order
http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
If you still have issues then please come back.
Br
KK -
Log creation for changes in Process Order
Hi,
We need a feature in which we need a log to created for any changes to process order. For example if qty of a component is changed, the log will records the old qty, time of change & who changed it. Similarly it should record other things like inserting/deletion of a component, insertion of a new resource etc.
Note that the log of status change in process order does not serve the purpose.
Please provide some solution to this.
regards,
MohitHello Mohit,
You need to implement Order change management (OCM). Explore detail functionality and capabilities of it in help.sap portal . Also there are tons of material on it in SDN forum . Refer SAP note 390635 for more information
If you have any query on any particular area on it then let us know .
I hope the information helps
Cheers
Kaushik -
Table name which contains status profile of a given process order
Hi All,
I created one process order and assigned a status profile for it.
I need to know which table will contain both these values.
Ex: If i give process order as an input, then it gives status profile as an output.Hi,
The Table for Status Profile is JSTO.
But there is no direct link bitween AFKO/AFPO and JSTO.
Take the help of an ABAPer for this..
Regards,
Siva -
PO cancellation for back dated process order
Hi,
I want to know how to cancel the confirmation of the process order which has been confirmed in the previous month,because when i go to cors option i get an error saying that the period has been closed.Kindly help
Regards,
Karthik RaiHi
If you need to calcel or reverse the confirmation for that posting date with respect to the particular material documetn for the process order
the period should be open.
otherwise
you can cancel that confirmation with the material document with the current date . so it not required the previous period should be opened when u material docuement got posted. -
Need BAPI for COR1(Create process Order)
Hi Gurus,
I need a BAPI or Function module for create process order (Tcode - COR1)
for which i am passing Plant, storage location,produced material number, quantity to produce,
received material,quantity to recived.
Regards,
Vijay MekalaHi,
is there any other BAPI or function module for COR1...
Regards,
Mekala Vijay
Maybe you are looking for
-
Adobe Drive won't run Custom UI SWF
I am trying to add a custom check in dialog to Drive 3.0.1.104. I copied the code from the thread "Custom check in dialog" and compiled it into a SWF. I placed the SWF into the resources folder and have verified that the URL passed back in the resp
-
OCR Crashing Can anyone help me with a problem I am having with the current OCR engine crashing
I have a lot of difficult images to recognize and whilst I am not expecting good results I am hoping to OCR these multiple files without crashing the program all the time. I have tried optimising scanned documents on the various settings, splitting t
-
Outlook integration Add-on is not working SAP 2007B (Status - Failed)
Dear B1 Experts, Please let me know what should i do , as SAP B1SAP 2007B Add on Outlook integration version 8.00.01.07 is having status as Failed ( it is not working ) So what should i do now?? Should i reinstall if yes then how to go about it?? plz
-
Error deploying JSF app on Sun 8.1 (Works fine on 9.0)
Hello All, I have a simple JSF app which works fine on Sun App server 9.0 but throws the error below on 8.1. Please help!!! exception javax.servlet.ServletException: java.lang.Boolean javax.faces.webapp.FacesServlet.service(FacesServlet.java:209
-
After System Restore on iPhone I cant redownload my Songs from iTunes HELP!!!
It says u have already bought this song than it says insuffient funds. How do i get my music back?