Product allocation is not working after setting all required config!

Hello SD gurus, Would you please help me to resolve this issue?
I followed and configured all the required steps for product allocation in ECC 6.0 Version still the product allocation is not working as expected.
Here are the steps performed
1. Created procedure through OV1Z
Maintained Product allocation procedureT.code OV1Z
2. Maintain product allocation object Transaction code: OV2Z
3. Create required info structure as per requirement T.code MC21
4. Specify Hierarchy and Define the “Product allocation planning structure”
Transaction code: OV3Z
5.Define Consumption periods
6. Control product allocation
T. code: OV4Z
Selected the product allocation procedure and given the required criteria and assigned to Info. Structure S991. Activated ‘Requirement category’ for product allocation
8. T.code OVZ0
Activate schedule line category for product allocation
S991 Info structure Planning parameters updated
Mc7F
Create update
T.code MC24
Activate the update
T.code OMO1
Create planning Hierarchy
T.code: MC61/62
Maintain planning type
. T.Code: MC8A/B
Created the product allocation plan for required quantity through MC94 IN spite of reserving stock as shown against the product allocation material specific and customer specific product allocation is not worked and the regular Atp check allocated stock to some other customer when created SO.
Thanks for your help in advance
Srini

Hi Sumitra,
Thanks a lot for your quick response!
Actually to say availability check is working but not product allocation.
I checked the settings in Material master MRP 3 view for strategy group and it is 40.
Availability check is 02 assigned. OVZ9 settings are assigned correctly 02-A- SD Order.
Not knowing what is preventing to reserve the stock against product allocation!
Do you or any one know where to see the product allocation stock?
Best Regards& Thanks a lot for your help!
Srini

Similar Messages

The date and time is not working after setting it to current date and goes back to may,26 2011

the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar). Also make sure your date and time on your computer is correct as well as the Time Zones on both.

B110a black in still not working after trying all recommended solutions

Hi there
Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a. Be sure to check the vents as shown in solution six, step three. If the above does not resolve the problem the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Lead Selection does not work after setting filter for ALV.

Hi, Can you please suggest on below scenario :
I have a Node with a sub node in it .
I am using the supply function on Sub Node to retrieve the date based on Parent Node.
There are two ALV's to display parent and item data. The issue is when a filter(user defined filter) is done on Parent table, the supply function does not work. The value is that of the selected row before setting the filter. Even after removing the filter, the item data is stuck and does not change on Lead Selection.
One thing I noticed is if the child table is a table UI, there is no issue. The only problem is when the second table is ALV
Thanks In Advance

Hi Prashanthi,
Your issue can be resolved as below
Create an event handler method 'set_alv_data' for the event 'ON_LEAD_SELECT' of parent alv
Write the below code inside the event handler method
METHOD set_alv_data.
DATA lo_node TYPE REF TO if_wd_context_node.
DATA lv_path TYPE string.
DATA lv_index TYPE string.
lv_index = r_param->index.
CONDENSE lv_index.
CONCATENATE wd_this->wdctx_my_parent_node
lv_index
wd_this->wdctx_my_child_node
INTO lv_path SEPARATED BY '.'.
lo_node = wd_context->path_get_node(
      path                          = lv_path
DATA lo_interface TYPE REF TO iwci_salv_wd_table.
lo_interface = wd_this->wd_cpifc_alv_child( ). "get the ref of alv comp of child
lo_interface->set_data(
    EXPORTING
*    only_if_new_descr =
      r_node_data       = lo_node
ENDMETHOD.
The above code sets the data node of child alv based on lead selection of parent alv data.
Note: Replace 'parent_node', 'child_node' with your nodes & 'alv_child' with your alv component name of child alv.
If you want to control the data of child alv on filter function, you can use the event ON_STD_FUNCTION_AFTE and once you define the filter you get the r_param->id = 'SALV_WD_FILTER_DEFINE' & now you can clear data of child alv.
Hope this helps you.
Regards,
Rama

Flash player still not working after following all discussion advice

Requested information: I have Internet explorer 9/ using 32 bit on 64 bit computer/windows 7/flash player 10.2 version
I contracted what my husband called a "rider" virus when I opened a knitting pattern of all things and if I understood it correctly was one of the anti-malware viruses talked about. My husband was able to remove the virus but like others have said here, my flash player will not work. My computer is only 3 months old!
Here is what we have done:
1: First removed all flash player and shock wave
2: I have run a full scan with my Mcafee program, then ran a full scan and quick scan too with my malwarebytes program. Everything in both is now clean. I then rebooted (I also even tried doing all of this in safe mode too with nothing changing)
3: came online and read a bazillion threads about others problems and tried every suggestion pretty much including those below
4: husband checked the kill bit (d27 thingy) and it was not there
5: reinstalled flash player and shock after running the scans and though they show up in my programs when I looked at the add ons as suggest to others the
neither shockwave or Flash Object was there
6: uninstalled everything again
So now I am back to where I started with nothing installed because I still have an issue and we don't know what it is. I truly appreciate your help in any way as it is frustrating that none of the other suggestions have helped.
this may not as my grandma used to say have anything to do with the price of rice in china, but we do keep getting a short freeze up on the computer followed by a message that the display driver stopped responding and recovered then it works again, but it does happen fairly frequently and this has been since the virus. I am showing everything is clean though with regards to virus scans and malware spyware scans.

Just when I thought I would finally find the answer you sent a message offline, which didn't help me a bit.
I have the same problem. My wife got a virus and I was able to uninstall it by poking around. After killing the virus IE would not run. I found some messages on the internet which enabled me to solve that problem by making some registry changes. However, I still have not been able to get IE to run flash. I do have it running in FireFox.
What was the step that you sent in private email that enabled him top solve the problem?
Thanks

Jar file is not working after deleting all packages from the same directory

hello
i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
Please tell me what may be the reason???
thanks in advanced

hello
i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
Please tell me what may be the reason???
thanks in advanced

Firefox does not work after update, all troubleshooting has been completed. Nothing can be clicked, not even the options in firefox.

I am unable to use firefox after the latest update. All troubleshooting methods listed on the website has been tried. I am unable to click anything in the firefox, tabs don't work, options don't work, unable to launch diagnotics, help or anything from firefox. Basically, I am unable to access anything within firefox.

Did you try a new profile?
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 23: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Ipod Shuffle not working after trying all possible supports from Apple!!!!!

I have an ipod shuffle and it has been working fine. It turns on and off and I can play music. Now all of a sudden I cannot connect my shuffle to my labtop through its usb port. It won't recognize it at all, it cannot be charged and I cant even attempt to put new songs on it. I am very angry with apple's service. I tried all things possible on their site and have continually requested repair service. I constantly get an unrecognized serial number every single time! I have copied it word for word and number for number over and over and over again. I can't even get one on one chat with a representative online because you guys don't recognize a serial number! This is just one big hassle and I don't feel like your service is very helpful at all. I love the Ipod and all it's accessories and other models but this is ridiculous. I even purchased the usb shuffle dock to try and see if it was my computer but it isn't. The dock doesnt recognize my shuffle either. I would appreciate it if Apple would just give me some kind of recognition and service me as a consumer please. I don't want to fill out some fax forms I don't even have a fax machine. Please help me figure out what's wrong or send me the things I need to send my shuffle in for repair thank you.

Just a note, the limited warranty on the Ipod Shuffle is 1 year. So when I got invalid serial number when I entered the s/n I knew something was wrong. What I discovered was that the character that I thought was a zero was actually a "D" and the "5" was actually an "S". Once I entered the correct serial number the website told me how much time I have left under the warranty. They even knew the approximate date that I purchased it - even though I didn't register it. So use a magnifying glass, a younger set of eyes, whatever to make sure you're entering the correct S/N. Now I just have to figure out HOW to return it. Good Luck!
Windows XP

Reinstall CSuite product which is not working after trasferring files from an old Mac to a new one?

I recently got MacBookPro, and transferred my old laptop files (including apps) to the new one. After trying to open Dreamweaver, I got an error massage. Sent it to, and closed the app thereafter. Than I tried to open the DW again but got a massage again. After that I was sure the programme is damaged, and I put the icon to the garbage box. Than I cleared the bos as was sure it would be possible to reload the programme (I'm a CreativeCloud member). But it is actually not possible.
My Adobe Application Manager marks the programme as an installed one, and it asks if I require any upgrades for the programme.
What shall I do to get DW istalled again?

What error message(s) are you getting?

Quicktime not working after loading Lion. It is in Applications folder. It is dark when trying to play. Audio is there, no video. Is something set wrong?

Quicktime not working after loading Lion. It is in Applications folder. It is dark when trying to play. Audio is there, no video. Is something set wrong?

It is supposed to be dark.
Is it all videos that don't display or just some. You may have installed something like Perian or Flip for Mac that translates the video codecs for Quicktime. They may need updating.

After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Was it just this one time? Could be that you, or your mom, were experiencing network problems. Try again at a later time.

My Wifi is not working after re setting the net work also

My Wifi is not working after re setting the network also.

Read here:
http://support.apple.com/kb/ts1559
If nothing helps, make an appointment at any Apple store.

Mic Jack not working after Driver Update, Console unavailable, can't install

LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

Product allocation is not working after setting all required config!

Similar Messages

Maybe you are looking for