Product Cost Collectors not settled to GL's during Period end Close

Hi,
We are using the repetative manufacturing process. We have an issue with our repetative manufacturing orders, during the monthly period end close.The product cost collectors WIP is not been settled to GL's.
The normal production orders are been settled to the GL's and both use the same settlement profile.
Can anyone suggest where could be the problem?
Thanks,
Srini

Hi,
In the SAP standard (as per the transaction codes indicated by you) it is not possible to include multiple plants. Either you have to execute for one Plant or for all plants. Probably, in Test run you can execute for all Plants and check the results, and then decide.
Thanks
Murali.

Similar Messages

Standar cost and product cost collector not updating the new price

Hi,
Created Standard cost estimate for one FG product and runned the product cost collector. Based on that consumption delivery everthing is made. Later on the work center and activity type changed in routing. Now i am trying to run the standard cost with new activity price (due to work center change) for the current period, system is showing only the previous rate(previous period) and it is not updating the new price becuase of already we have created the product cost collector.
Can any one give the suggestion for how to update the new price in standard cost as well as new price updation in product cost collector.
govind.

Hi
1. If the original cost estimate was run in the current month - Then you cant re-release cost estimate unless you reverse it from CKR1
If the cost estimate was of previous months - then you can definetely release it again
2. In cost collector, you need to manually cost it again using the Preliminary costing feature... Your cost coll will then show 2 cost estimates i.e. One from Original date to current date-1, and 2nd from Current date to 31.12.9999
br, Ajay M

Settlement Parameters on Product Cost Collectors

The basic config on Product Cost Collectors has settlement to a material.
1) Does someone know how to change the settlement rules to settle to a GL account or Order for new materials
2) For old materials, does someone know how to change the settlement rules. SAP - I believe in HELP and in note 388457 says you cannot change the setlement rules.
Thanks

Thank you for responding.
Unfortunately, even if you create a new profile and allocation structure, you cannot change it on the order.
I later found in SAP HELP that the settlement profile on cost collectors cannot be change. That was also verified by oss 388457.
But, I was hoping I was wrong or there has been a further change
Jeffrey

Question in Product Cost Collectors

Hi All,
I have one question in Product Cost Collectors.
We are using REM and we have multiple products with same BOM routing. Is it possible to assign several materials to to one Product Cost Collector inorder to reduce number of cost collectors.
For example, for routing we can create a Group and assign serveral materials to a group.
Thanks and Regards
Purushothaman

Hi Purushottam,
In REM, it is required to create it for every material.
Even if material has more than one production version, need to create separate Product Cost Collector.
Some more explanation on Product Cost Collector -
u2022 Object in cost accounting used in Repetitive Manufacturing.
u2022 A separate product cost collector can be created for each production version or material. The collected costs are settled to inventory at the end of the period.
u2022 The functions performed for product cost collector during the period end closing process include :
u2022     Work in process (WIP) caculation
u2022     Variance calculation
u2022     Settlement
u2022 In Repetitive Manufacturing, all costs attributed to the production of a material are collected on a product cost collector and settled periodically (period-based Controlling).
u2022 The product cost collector is settled periodically according to the posting period (for example monthly) .
u2022 For a material , product cost collector is made for each version
u2022 The actual cost collected can be viewed through product cost collector.
Hope it is clear now.
Srini

CO88 - Collective Settlement Processing for Product cost collectors

Hello Gurus,
I have couple of Settlement related problems. Please advice if you have any solution to fix these problems.
1.We are using CO88 - Collective Settlement Processing for Product cost collectors but some of the cost collectors are not settling fully. Where as the same cost collector settled individually without any problem.
2. Some cost collectors are settled but very small amounts are still there as un-settled.
Thanks in advance.
Vishwanath.

Hi
Welcome to SDN! We hope your 1st experience here is good
Issue 1: It depends on the error that you got at the time of settlement... Many times, when a PCC is being posted to from Production while you are trying to settle, it can give you error...
later on it can be settled w/o any issues
Issue 2: Ideally there does not remain any amount after settlement.. May be the amount which you are seeing pertains to the next month.. You can shift to periodic view using CtrlShiftF11 and see if any balance really exists
BR,Ajay M

Automatic Settlement for Prod.orders & Product Cost Collectors.

Dear all,
Please help me how to carryout the Automatic settlement of Production orders &
Product Cost collectors on every month last working day mid night.
Please tell me how to schedule this as an automatic scheduled job.
This program is not been allowed to schedule as a job.
Waiting for your inputs.
Please help me.
Regards
Mangalraj.S

Hi
Create a Variant with the order types need to be setteled at the period and schedule the same in background processing.
Regards
Venkat

Changing the receiver cat in the settlement rule of Product cost collector

Hi,
I have created a Product cost collector using the Transaction - KKF6N. and observed that the settlement rule got created automatically with the CAT - MAT. I need help for below queries.
1. Is it possible to change the settlement rule for the Product cost collector?
2. If yes, Could you please let me know the procedure to do this?
3. If no, what is the alternate as I want to change the CAT from MAT to ORD.
Your help is very much appreciable and Thanks in advance for the help.

Hi,
Check in order type, Which settlement profile is maintained. Then Goto settlement profile maintain receive type which you want to settle.
Regards,
Sreekanth

Error while creating Product Cost Collector

Hi SAP Gurus,
While creating Product Cost Collector I am getting the following Error:
Enter a distribution rule for Order without a validity limit
Message no. KD059
Diagnosis
The settlement profile used requires you to define a distribution rule for Order. For period 009 2008, however, you have not created a distribution rule for Order.
Procedure
Create a distribution rule for Order without a validity limit, because, if the distribution rule does have a validity limit, the system always issues this message in the period following the last valid period.
You can also use a different settlement profile that does not require such a distribution rule, or change the settlement rule used.
Can any one help where exactly i need to maintain this.
The settlement profile settings are fine.
I am getting this error only after i have changed the scenario to Reproting point back flushing

Dear Suryanarayana
Please check the corresponding settlement profile for product orders.
In most of the cases message KD059 means that no distribution rule is assigned to your production order.
This is not an error, but the system design. In order to avoid message KD059 you will either have to enter settlements parameters and a distribution, or change settlement profile for valid receivers in transaction OKO7 from 'settlement required' to 'Can be settled'.
I hope this helps resolve the issue for you. I wish you the best in your endeavours.
Kind Regards,
Brendan

Transfer of Costs in Product Cost Collector to COPA

Dear Experts,
Please can you advise me on this current issue I'm having. Below is a description of problem:
Customer is currently using report designed in COPA (KE30) to derive P&L report for using Plant as a characteristic.
This was being done at a time when Product Costing functionality was not being used
All costs (administrative, sales and production costs) were being collected in cost centers
At end of month assessment of cost center values to COPA is executed (KEU5)
Customer is then able to derive P&L report per Plant characteristic
However with implementation of Product Costing, all Production related costs are captured in Product Cost Collectors and not Cost Center
Hence we have no way of assessing or transferring total production costs from Product Cost Collector to CO-PA
We have tried to configure FI/MM PA transfer structure (KEI1) and default account assignment (OKB9) for automatic transfer of costs on goods receipt/issue, however this is not working because the product cost collector is used as the default account assignment for the transactions
So far only material cost valuation of sales/billed materials are possible (which does not address concern)
As a result we have a gap and customer is unable to derive P&L by Plant from CO-PA.
Can you advise if there is a way out, in order to have all Production Cost transferred to CO-PA.
Thanks,
Ola.

Hi Ola
Your Cost centers would be categorized as below
1. MFG Cost Centers (In Plant)
2. Service Cost Centers (In Plant)
3. Few Cost centers (outside plant) Eg: Sales, Marketing, Sales offices etc
At period end
1. Allocate the Costs from SER CC to MFG CC using Distribution / Assessment cycle.
This will make SER CC as zero
2. Calculate actual activity price in MFG CC (KSS2 / KSII)
3. After this, do revaluation of PCC using CON2.. This will make balance in MFG CC as zero
4. Allow the Variances to be updated to COPA by ticking the "Variances to Costing based COPA" in your settlement profile
5. In short, what remains for you to allocate to COPA is the 3rd category of CC.. i.e. you should allocate those CC to COPA whose cost is not included in the cost of product using COPC module
Br. Ajay M

Deleting old Product cost collectors with variances

Hi Experts
The client is wanting to archive old Product Cost Collectors. There are 3 of them that say that they have unsettled variances. I need to delete these which are in 1999 and 2001
The error message is KO451. I have tried to set this error to a warning but it is not allowing this
Please advise
Kind regards
Dawn

Hi Dawn,
you can check SAP note 140672 in which the procedure to be followed is explained
in case of KO451.
A workaround would be: You can uncheck the indicator 'Variances to
Costing-Based PA' in
settlement profile. Then you can close/archive the order.
br, Guido

Product Cost Collectors

Hi,
Can anyone tell me what is exactly product cost collectors and what is the impact on the production orders and cost?
If there is a BOM change, we will just create new production version and new product cost collector. We will not update the standard cost. Is it that the new production orders will pick up the new cost based on the product cost collector? even though the standard cost was not up to date? What will be the impact to the accounting?
Kindly please advise. Thank you.

Hi,
Following link will be useful:
http://help.sap.com/saphelp_47x200/helpdata/en/5f/1faba54aee11d189740000e8322d00/frameset.htm
A few points for reference:
- Product Cost by Period, Product is the main cost object.
- Actual costs can be collected on the PCC
- No settlement rule for a mfg order linked to a PCC
- In PCC, the components in the BOM picks up the price from the material master
- If Std Cost Est is not upto date, then matls in PCC will take existing / old price
- So the FG Preliminary cost estimate will not match with its Std Cost
- Moreover inventory valuation may vary if std cost est is not up to date
- The Valuatin variant specified in the Costing variant actual of the PCC is used to valuate the data confirmed for the mfg order.
- This costing variant results in a temporary prelim cost est for the mfg order. This preliminary cost estimate cannot be saved.
Integration with Mfg Order:-
If you have specified in the order type of your mfg orders that the costs should be collected on a PCC rather than on the mfg order, the system creates a link to the PCC when you create a mfg order for the corresponding combination of characteristics (such as material / plant / production version). The mfg order receives the status PCC (product cost collector). This status prevents costs from being allocated to the manufacturing order.
The above might give you some lead.
Raj

Abolish product cost collector for production order

Dear Experts,
we use for some production order types the product cost collector. Now we plan to abolish them and change the settlement for production order. Which things do we have to pay attention? Do we have to finish our running production orders first or is it possible to change customizing during running production process. Thanks for your hepl!
Best regards
Steffen

Hi Ajay,
thank you for your answer.
We have tested two variants:
1. new order type, so we can process two separate settlements, for orders with PCC and the new orders without PCC. After archiving of all prodorders with pcc, archiving of pcc it should be possible to switch back to old order type.
2. change customizing without finishing existing orders, settlement for existing orders, all orders which already have been processed will be settled by pcc (status pcc usage in order header) We have not be seen any strange system behavior.
We use the pcc collector for different order types in different plants and want to abolish plant by plant. In this time the pcc will still be customized/exists.
Best regards
Steffen

Profit center in Product cost collector

Hi,
We need to change the profit center in the product cost collector after the actual postings were made. SAP does not allow to change the profit center. So any other work around solution for this issue? Can somebody help me with this?
Thanks & Regards,
Raghava

Hi Bhuvaneswari,
We are having a situation,
The issue is to change the profit center for the product collector after the actual postings were made. Now the big problem is there is no PA transfer structure defined to execute the settlement for these product cost collectors and then change the profit center. Can you give some work around solution for this? And also what about the postings made previously.
To give more insight,
In the order type, Settlement profile is maintained
In the Settlement profile, Allocation structure is maintained
How do you link the settlement profile / allocation structure to the PA transfer structure?
I can not settle the order (Product cost collector) as there is no PA transfer structure
Thanks & Regards,
Raghava

Old material overwritten by new material code in Product cost collector

Hi SAP Gurus,
How can I work around if a product cost collector with material XXX has been overwritten by a new material YYY when creating the KKF6N.
Both material code having the same plant, same orde type,same production version but just different material code.
When saving the preliminary costing for the product cost collector for material YYY, the system prompted me the order number 700022 which is already existing and created for material XXX.
By right, this shd not be happened but indeed it did.
Now when displaying the report S_ALR_87013127 - Order Selection, the report showed the new material YYY was created with order number 700022 but the content of the data was for old material XXX.
Now my problem is how can I get back the product cost collector for material XXX as the original order number 700022 was meant for material XXX and not mat YYY.
And also when executing backflush (MFBF) for old material XXX, the error msg prompted as 'content of order 700022: Mat YYY transferred to interface (IMSEG):Mat XXX due to this I can't backflush material XXX.
Really appreciate your expertise on this urgently.
many thanks!

problem due to system bug, have to log to OSS for help.

How to maintain One product cost collector for multiple materials and configuration setting

Hi experts,
my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
please guide me in the same.
Thanks in advance.

Hi Shripad,
you cannot assign same Product cost collector to different material.
Because you creating cost collector for material combination of material /production version,material /Bom Routing.
so please create individual cost collector for every material.
if you have any query kindly revert back.
Please mark the answer as helpful if it is helpful to you.
Because march 5 onwards scn has stopped awarding points to liked content.
Starting now: No more points for likes on comments/replies
Thanks & Regards
Sandeep Kumar Praharaj

Product Cost Collectors not settled to GL's during Period end Close

Similar Messages

Maybe you are looking for