Product Costing - Quantity Structure Off not working

Hi All,
I have a Material of Type FERT. It has a BOM of its own. When I do the product costing of this material for costing variant PPC4, it always explodes the BOM, irrespective of its status of Indicator "With Quantity Structure" in its Material Master.
Note:
1. Costing Variant PPC4 has Indicator "Ignore Product Cost Estimate Without Quantity Structure" set OFF.
2. BOM is exploded irrespective of the Procurement Type.
Pl suggest a way to cost FERT Material without Qty. Structure (no explosing of BOM, instead directly pick the cost from the FERT Mat Master)
Br,
Vasu

HI,
1. FYI, if you maintain procuretype as E or X, then explosion of BOM happen. If you maintain F, it is possible to explode the bom.
2. Let me say, as per the below reqt, you want to pick up the value from the material master itselt. So, i assume, you maintain future price or planned price in accounting view.
If that is the case, then change the costing variant with T code OKKN and in the valuation variant button with strategy sequence start with Future price from accoutnign or current Planned price.
Please let me know if you expect any clarification in this regard
vijay

Similar Messages

My phone fell down on the floor and shutt off not working again

my phone fell down on the floor and shutt off not working again

what i should do to know the phone has damaged,
Try the steps here for the appropriate symptoms.
http://support.apple.com/kb/TS2802
If you are unable to get the iPhone working, it's almost certainly damaged. Take or send it to Apple for a definite diagnosis.
how much fees for replacement ??
If you have AppleCare+ coverage, the cost will low; in the US it's $49. If you do not have AppleCare+ on your iPhone, see the Service Pricing section here:
http://www.apple.com/support/iphone/service/faq/
Regards.

Cost Centre drop down not working in Shopping Cart

Hi Experts,
Cost Centre drop down is not working in Shopping Cart.
Version: SRM 7.0 SP05
Message - no input help due to errors when checking the display authoriz.
I have checked there are some SAP Notes available for this issue, but it is for SRM 5.0 version
725247 - Search help and BAdI BBP_F4_READ_ON_ENTRY in accnt assgn scr
839534 - Problems with dropdown list in Acc. ***. overview
925890 - Cost centre drop down not working
I have raised OSS Message, Please gothrough the reply from SAP below
Note
656633
815849 top 5
Customizing Recommendations
- Note 656633 desribes pre-requisites for ERP RFC-user using F4-help.
- Assign SRM standard role /SAPSRM/EMPLOYEE during F4-help testing.
- Check RFC-dialog for F4-help destination using SM59.
- ERP F4-help destination must be maintained in IMG table bbp_backend_dest.
- Using PPOMA_BBP dropdown disable BE_F4_HELP authority activity as of note 815849. Multiple values must be maintained in attribute CNT cost center.
- Hint: Mix of ERP F4-help and PPOMA_BBP dropdown is not possible.
Return
a.SRM system ID, client, remote access, logon data buyer who face the problem incl. sap_all
b.ERP RFC-dialog access via SRM, RFC-user incl. display or sap_all
I have followed both the notes, but still problem presists
Please advice.
BR,
Siva

Hi,
This issue has been resloved.
Solution:
Step:1
Assign SRM standard or custom role like /SAPSRM/EMPLOYEE to user; Please make sure multiple values been maintained in attribute CNT cost center in PPOMA_BBP for the user
Step: 2
Disable BE_F4_HELP authority activity for role /SAPSRM/EMPLOYEE in BBP Component > SRM: General Access Authorizations in EBP
Step: 3
Apply SAP Note 668746 - COIN - Switching off OKB9 in EBP scenario in SAP R/3 as per note 815849 Solution 1
System will check during the processing of account assignment objects in an EBP scenario, the backend system reads the default account assignment (Transaction OKB9) as usual if EBP does not provide any account assignment. This note will Switch off OKB9 in EBP scenario and it will list the CNT values from PPOMA in the shopping cart account assignment F4 help.
BR,
Siva

Purchase Order Goods Receipt quantity tolerance setting not working.

Team,
We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
The issue that I have is as follows:
Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the material master and also changed the message to a warning in OMCQ for message number M0722.
I had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
I have searched for OSS notes, however they mention that there is no solution.
Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
Thanks

Hello,
Please check the Tolerance levels in O588
Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
Best Regards,
R.Brahmankar

The product that I purchased is not working!!!! I need help and I've been stuck in your "Contact us loop" for the last few days and I'm getting frustrated. How do I contact you for HELP!

The product that I purchased is not working!!!! I need help and I've been stuck in your "Contact us loop" for the last few days and I'm getting frustrated. How do I contact you for HELP!

Probably the best place to start is the right forum for your product. This is the forum for Distiller Server, a long dead product used by big companies, and probably not what you have. If you can't find the right forum, please let us know the FULL name of what you paid for (please check your invoice, as Adobe have many similar products), and we can perhaps direct you. Good luck!

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

Hand off not working on iPhone 5

hand off not working between iPhone and iPad Air.
Any suggestion. both using same iCloud ID's
thanks

Hi there SZkiyani,
You may need to verify that Bluetooth is enabled on the devices as well. Take a look at the aritlce below for more information.
Connect your iPhone, iPad, and iPod touch using Continuity
Use Handoff with Apple apps such as Mail, Safari, Pages, Numbers, Keynote, Maps, Messages, Reminders, Calendar, Contacts. You can also use Handoff with some third-party apps. Start a document, email, or message on one device and pick up where you left off on another device.
To use Handoff:
On both devices, you'll need to turn on Bluetooth and sign in to the same iCloud account.
Use one of the apps listed above on one of your devices.
-Griff W.

Cost Component Structure Price Not updating

Hi,
I have run cost estimate and successfully Mark and Released(CK40N). But when I see the cost estimate in CK13N its updating Ram Material cost (Overall and Lower level) but rest of the items not getting updated e.g. Mfg. Machine Time, Mfg Operter Labor, Quality Test Labour etc...
I have checked in Routings each acitivity is assigned and checked. In log "Mat xxxx, Routing does not match selection ID. ZC"
Please advise how can will get update fields(mach cost, labour cost) with values in cost componenst strucure in cost estimate..
Thanks
Srinu

Hi ,
About why routing not match. Please inform your PP consultant as below :
It could be your order type and plant selection id that assign are different. Please Check in OTD in OPL8 under routing tab also check in OPEB for automatic selection of routing also check the status of routing .
If above cannot slove , please goto
Goto OKKN->select the Costing variant that you have used in CK11N and under control tab goto quantity structure control
-check the value or ID assigned for routing selection.
As per this your routing gets selected in CK11N or CK40N.
Thank you.

Iphone 4 on/off not working

The on/off button for my iphone 4 is stuck and not working.

So is mine! The phone works fine, but there is a danger of activating apps when not being able to switch off the screen. Anyone with any ideas?

[SOLVED] DPMS screen off not working with xorg 1.16.0, gnome 3

After the update of xorg into 1.16.0-2, screen is not turned off by DPMS in GNOME.
I also tried an manual command:
$ xset dpms force off
but it's not working.
In other WM, this command is working.
With xorg 1.15.2 and gnome 3, there is not this problem.
When I entered the command, the screen turned off for a couple of seconds and turned back on.
Last edited by esrevinu (2014-07-22 23:35:07)

Updating xf86-video-intel to 2.99.912-4 solved the problem.
Thanks.

Substitution for "Cost of sales Accounting" not working with cycle-trx KSC5

Hello togehter,
I have a problem that it seems that a created Substitution for "Cost of sales Accounting" is not executed in our System when running a cycle for Indirect Activity Allocation (Trx. KSC5).
Now I want to debug the Indirect Activity Allocation but I don't know how those Substitution Steps are generated as code that I can set a breakpoint when executing the cycle with Trx KSC5.
I want to try a trace when activating the substitution with transaction OBBZ but I'm not able to analyze in which Forms/Functions the Code is generated.
I also saw some OSS Notes that there are problems with "Cost of Sales Accounting" but I don't know concretely what to do to solve that special problem.
Kind regards
Udo

thanks for your answer.
I added the filed FKBER in table VWTYGB01.
Now I can select field "functional area" for CO Substitution.
nevertheless substitution does not work and set functional area on Dummy FB 9990 for CO postings to CO-object without Functional area.
Thats curious because I maintained exactly the same Substitution on an other SAP System (IDES Test System) and here it works.
Any ideas?
Are there further settigs required after maintenance of table VWTYGB01??
Thanks in advance

Cost assignment search help not working

Hi,
I have looked in to the SD thread already, but none of the notes seems to be of interest as we are on support package of the notes!.
Here is the problem, when trying to select cost assigment values, cost center and GL account search helps/f4 functionality is not working.
Can u pls tell me which all settings inside the system I should be looking into, also any possible notes ?, we are on SRM4.0, pack 13.

The reply can be more professional. People here are not hunting for points. They are here to help struggling people to solve their problems. The points are in no way a match for the time and the valuable answers they suggest. There should be more courteousness in thanking. Points are just the least way to thank. But some questioners take it as if they are paying something and doing a great return. Anyway great to hear that your problem got solved!
Regards, IA

Hold Switch On and Off not working - Always ON

Hi,
I am having a serious problem with Hold Switch which is all the times in ON condition though I am moving right and left. None of the buttons are working because its in Locked state. Hold switch is not working. Is it a product related issue where in I need to go to store or is there any way to make it work.

Well it used to be that the iPods were not all that hard to open, especially with some simple plastic opening tools. However the new Classic line feature a brand new case design that to the best of my knowledge, no one has figured out how to open without breaking the case pieces. This is why if you look at many of the third parts battery sellings and iPod repair places, none are yet selling replacement batteries due to the inability to get into the ipod without ruining the case.
That said, if you do have a Classic, then it is obviously still under warranty since it just came out. Therefore, I would hit up your local Apple store or send it in if you don't have one near by. The hold switch not working is a warranty issue that they should cover.
Patrick

'flagged' to 'filters off' not working. still showing only flagged images.

Recent issue:
when I try to switch from 'flagged' to 'filters off', it is not working. The app is still showing only flagged images. I can't access my unflagged images in the gallery at all.
I have to exit the app completely to correct issue.
I'm using the most recent update of lightroom 5.5 from the CC.

A couple of things to try:
1. Exit LR and then delete the LR 5 preferences file: Preference and other file locations in Lightroom 5. On Mac, you must then reboot.
2. In the Library Filter Bar, select Restore Default Presets:
3. If neither of those help, take a screen shot of the entire LR screen when you have Flagged selected, and again when you have Filters Off selected. Post these here. In the past, some others have experienced wierdnesses in the LR filter behavior, and a screen shot might give some more clues.

Product Costing - Quantity Structure Off not working

Similar Messages

Maybe you are looking for