Product costing without quantity structure configuration document

Hi Gurus
Can any one send product cost configuration document without quantity structure to [email protected] in
i need only without quantity structure document only please
Thansk
Rao

Dear MK,
CK40N = CK11N only for exploding BOM and saving cost Estimate. + CK24 (open perid and mark the pice and update the price)
All in one place, see below screenshot.

Similar Messages

Product costing without production planning module

Is there any way to work with product costing module without production planning for service sector.

Hello
You may use the product costing without quantity structure. This is useful if you do not have PP module but have materials and you need to calculate the standard cost of the materials.
In case you do not have materials and only have kinds of services then these can be created as activities for a cost center like a FICO consulting activity for SAP cost center. You may then calculate a price per hour of the activity and may charge it to the service order/ internal order.
Sangram

Cost estimate without quantity structure

Hi Gurus,
can you explain me on below queries
-->in which situation cost estimate without quantity structure is used
---> what is the impotance of credit key in costing sheet.
Thanks in advance
Janardhan

There are several situations where you may want to use a cost estimate without quantity structure. You can use it as an additive cost in conjunction with a cost estimate with quantity structure. For example to include freight or other expenses in your cost estimate that are not readily available with quantity structure. You can also use it to develope a cost estimate for a new product where the quantity structure has not yet been fully developed. You can also use it in a complex manufacturing environment that does not use Boms and routings.
As far as the credit key in overhead sheets are concerned, as the name implies they are used to specify which object is credited during the overhead allocation and what secondary cost element is used in the allocation. Overhead sheet are just another allocation technique in CO, where you allocate costs from one CO object to another. The credit key determines the sender object in the allocation.
thank,

BAPI to create cost estimate without quantity structure.

Hi All,
I have to create a cost estimate without quantity structure using a BAPI.The transaction used for this is KKPAN.Does anyone kow any BAPI which can be used to perform the same functionality as this transaction?
Thanks
Shwet

check FM KKPI_BDC_COSTING_CREATE / KKPI_BDC_COSTING_CHANGE and template pgm RCKUNITCOSTING
Execute FMs in background mode with update = Synchone

Equivalent to KKPAN+CK24 for without quantity structure costing

Hi,
In costing we can use CK40N instead of CK11n+CK24 (with quantity structure) as far as I know. Is there any single tcode like CK40N for us to do both cost estimate creation and marking and release instead of using both KKPAN+CK24 for without quantity structure costing?
Thanks
M.K

Dear MK,
CK40N = CK11N only for exploding BOM and saving cost Estimate. + CK24 (open perid and mark the pice and update the price)
All in one place, see below screenshot.

Mixed costing for cost estimated WITHOUT quantity structure

Dear all experts
Anyone can help me for this question u201CCan we use mixed costing for cost estimated WITHOUT quantity structure?u201D. If u201CYesu201D, please give me a hint how.
Thank you for your help
Noy

Dear Ajay
Thank you for your quick answer. So I will try to use cost estimated WITH quantity structure instead.
Thank so much
Noy

Product costing by sales order configuration steps

hi
plz send me product costing by sales order configuration steps.
sir, i know manufacturing order configuration step but i do not sales order configuration.
in the sales order also is same as manufacturing order like first we have to make planning cost , the planning cost should be updated to material master and next configure the actual cost.
for first step- costing variant -okkn
next -costing variant -opl1
for sales order also same we need to update planning price first- what is costing variant
for actual cost - what is costing variant
plz tell me detail
regards,
sowmya
Moderator: Please, read forum rules before posting

Hi Sashikanth,
Please send me the Configuration document for make to sales order.We are at Blue print stage need some docment for make to sales order.Plese send me the document it will will be very help full for me.
My id is [email protected]
Thanks in advance
Regards,
Nagaraju
Edited by: nagaraju sami on Mar 9, 2008 11:58 AM

Product Costing without PP ( Production Planning ) Module.

Is it possible to implement product costing without PP being implemented ? If yes then how and what steps and if no then why is it not possible ?
Edited by: sapr3india on Mar 25, 2010 11:42 PM

HI,
Yes, It can be done using the CO Production order.
Regards

Cost Analysis result different from the cost estimate quantity structure re

Hi
Cost Analysis result different from the cost estimate quantity structure result in the same costing
run why this happen like this. ( in CK40N costing run result -- Cost analysis -- double click on costing result it shows cost estimate quantity structure result values different from cost analysis value )
Pls advice....
Regards
Kesharika

It depends on your costing variant. For sample, if you take the price in the 1° price estimated on the material view and this data has changed, you can have a difference between the first and the second estimate.
Perhaps also, it's just a definition of layout.
And 3rd hypothesis : you are looking on component in the ck40n and the variant don't take in account your cost component and just the material price.
Christophe

Reg:Cost Estimate without Quantity Structure

Hi Guru's,
For Cost Estimate with Quantity Structure we need to run the following T.Codes....
1) KP06
2) KP26
3) KSPI
4) CS01
5) CA01
6) CR01
7) CK11N
8) CK24
I want what are the T.Codes for Cost Estimate without Quantity Structure

Hi,
while am doing T.Code:KKPAN the following issue is coming....
*Material F29 in plant 1000 w/o cost comp split: price acc to val strategy
Message no. CK193*
Diagnosis
When valuating material components,
the system could not find a cost component split for F29 in plant 1000.
Possible causes:
The material has not been costed.
The material has not been selected for the costing run.
The BOM was changed after the selection or BOM explosion for the costing run was carried out, and the material now has a new low-level code.
This is a configurable material and does not have a costing view in the material master.
The default value for price control is not set in the material type.
The material belongs to a recursive structure. With this material, the system begins the iterative costing of the cycle. You can check in the material overview of the cost estimate whether the material belongs to a cycle.
System Response
The material is valuated with the price determined through the valuation strategy.
Procedure
Check the log.
Carry out selection and BOM explosion for the costing run again.
If the material is a configured material, create a costing view in its master record.
Note: I already checked cost component spilt assigned for Plant....

How we calculate product cost without taken activity type

Respected sir,
pls tell me without taking activity type costing can we calculate product cost? is it possible through Overhead costing to calculate product cost?
or if we taken quantity base costing how we calculate each product cost?
please help me.......
Than'x
Dhananjay

Hi
Without Activity type you cannot calculate Operation cost. It is not good practice. Why you want to do like this. Please explain.
I think Over head cost can be calculated without operation cost.
Regards
J. Saravan

Product cost by period/process configuration

hi
please any one send me your personal email id that who have more idea on process costing/ product cost by period
please help me .
thank you
nagesh

What do you need?
Ambadas

How to calculate product cost without PP?

Hi,all
Now I have a question about product cost
The system don't include PP, only FI/CO,MM, so there is not BOM,Routing and Product Order,and so on.
Then how can I estimate the product cost?
And how can I collect the product cost? And how can I calculate the actual cost in Period-End Closing?

Hi Srikanth,
thanks for your help.
Yes,I will use CO Production Order to collect the costs.
My flow is
first,create CO Production Order using KKF1
then, send material to the CO Order using MB1A (how does I send the activities from Cost Center to CO Order ?)
then,receive goods from CO Order using MB31
The flow is right?
But how can I send the balance of the manufacture Cost Center to the CO order?
How do i process the balance of the order?
and how can i calcute the actual price of the goods?
regard
Edited by: Yongjin Feng on Feb 26, 2009 9:20 AM
Edited by: Yongjin Feng on Feb 26, 2009 9:30 AM
Edited by: Yongjin Feng on Feb 27, 2009 1:54 AM

Product costing issues

1)what is different bitwen with quantity structureand with out quantity structure?
2)what is valvated stocks and non valvated stocks?
3)what is the need of cost component structure , how many segments can be define in cost component structure?
4)how we are going to do work ing progress in product cost
5) what are the status in order, types of order?

Dear Pradeep,
1.Material Is Costed with Quantity Structure
This indicator determines whether the material is costed using costing with or without a quantity
structure.
This setting can be found in Costing1 view in the material master.
Use
If you usually cost materials using costing with quantity structure, turn on this indicator.
If you usually cost materials using costing without quantity structure, do not turn on this indicator.
You can change the indicator in the material master record at a later time.
Procedure
If you always cost your materials (including raw materials) using costing with quantity structure, you
should turn on this indicator. This improves performance, because the system does not search in vain
for existing cost estimates without a quantity structure for every material when it explodes the BOM.
Therefore, only turn on this indicator if you normally cost the materials using costing without quantity
structure.
Regardless of the setting, you can cost a single material with or without quantity structure. However,
you should bear in mind that this setting is always used in the costing run and in mixed costing
(creating procurement alternatives).
CK11N and CK40N is used for costing material with quantity structure.
KKPAN is used for creating material cost estimate without quantity structure.
2.Valuated stock is the stock of the materials maintained in value basis,it may be under Restricted use
or non-restricted use .
Nonvaluated materials (UNBW)
Nonvaluated materials are managed on a quantity basis, but not by value.
5.status in a production order are for Eg,
REL Released
PCNF Partially confirmed
PRC Pre-costed
BCRQ Order to be handled in b
GMPS Goods movement posted
MANC Mat.availability not che
PDLV Partially delivered
SETC Settlement rule created
So after performing each business funtion the status of the production order changes.
Regards
Mangalraj.S

Product Costing - Quantity Structure Off not working

Hi All,
I have a Material of Type FERT. It has a BOM of its own. When I do the product costing of this material for costing variant PPC4, it always explodes the BOM, irrespective of its status of Indicator "With Quantity Structure" in its Material Master.
Note:
1. Costing Variant PPC4 has Indicator "Ignore Product Cost Estimate Without Quantity Structure" set OFF.
2. BOM is exploded irrespective of the Procurement Type.
Pl suggest a way to cost FERT Material without Qty. Structure (no explosing of BOM, instead directly pick the cost from the FERT Mat Master)
Br,
Vasu

HI,
1. FYI, if you maintain procuretype as E or X, then explosion of BOM happen. If you maintain F, it is possible to explode the bom.
2. Let me say, as per the below reqt, you want to pick up the value from the material master itselt. So, i assume, you maintain future price or planned price in accounting view.
If that is the case, then change the costing variant with T code OKKN and in the valuation variant button with strategy sequence start with Future price from accoutnign or current Planned price.
Please let me know if you expect any clarification in this regard
vijay

Product costing without quantity structure configuration document

Similar Messages

Maybe you are looking for