Product Delivered Status Date should be there in Standard Search and Result screen of Service Order. Product Delivered Time should be Available in Result screen and In Result screen there should be facility to filter on basis of Time

Hi team,
Product Delivered Status Date should be there in Standard Search and Result screen of Service Order. Product Delivered Time should be Available in Result screen and In Result screen there should be facility to filter on basis of Time.
How to add this in search result screen.configuration is it possible? or any changes in development.
Compnent - BT116S_SRVO
Thanks
Kalpana

Hi Kalpana
Please reread my comment. I said to try and populate "Requested End" Date.
Make sure the date profile assigned to the transaction includes this Date Type.
If you can populate this either manually or programmatically the solution should be quite forward.
If you cannot do this, only then should you look at making any significant sort of enhancement.
Regards
Arden

Similar Messages

Creation of service order at the time of despatch(invoicing)

Hello PP Gurus,
Is it possible to trigger a service order at the time of despatch(invoicing).If yes how.
Thanks in advance.
Sudarshan

I think it is not possible in standard SAP.
You have to go for enhancement(user exit).

TS2756 hotspot is not working on myiPad 3, hotspot tap is cellural data always appear that it is searching, and never stop. Vodafone and tradeline told me that there is no problem with carrier and Sw. Tethering data is never kept.

Hotspot appear always to search and never stop
internet is not working without internet APN data
Tethering APN never save the data
Vodafone carrier checked and mentioned that the no problem with the SIM
Tradeline checked and the IOS was latest 6.1, but asked to reinstall from scratch
Please advice

I have this _same_ issue, exactly. Initial backup goes just fine, but incremental backups fail. And like you, I replaced the internal drive.
The failures didn't start occuring long after the original drive was replaced--which was about 1 year ago. The new drive was non-Apple and worked fine--and tests fine now as well when outside the TC. But suddenly incremental backups started failing when the TC firmware and utility app were updated about 2-3 months ago. I even swapped the internal non-Apple drive for another known-working non-Apple drive, and same results.
I strongly suspect Apple added something to the firmware to check if it's an Apple or non-Apple drive in the TC and, if the latter, maybe causes incremental backups to fail. This is only speculation and, obviously, the initial backup still works, so any checksum like this would have to be only during the incremental backup process.
I'll be checking into this thred to see if others have the same issue, or if a solution is found. Hopefully my hypothesis is just para-apple-noia and it's some small, easy-to-fix issue.
-Gizm0d0

Service order is on product deliver status ,then i want to display product delivery status date and time on result list ?

Hi Team,
service order is on product deliver status ,then i want to display product delivery status date and time on result list ?My requirement is i want to display product delivery status date and time based on delivery status we need to display the date and time .how to do it.? basically i have created the productu delivery status field in search and result through AET.
Now the fields will be available in BTADMINH.
how to set based on status delivery to get the date and time .
Thanks
Kalpana

HI Ajay,
I have added code in BT116h_srvo,attributes - LCSTATUS,method - SET_LCSTATUS.but after change status f8 ..but the value is not filled in result list..so i need to write the logic in EH_ONSAVE or some other..could you please help here..what change i need to do..
IF
<nval> = 'E0004'.
DATA : lv_date TYPE dats.
DATA : lv_time TYPE tims.
lv_date = sy-datum.
lv_time = sy-uzeit.
DATA : lr_parent TYPE REF TO cl_crm_bol_entity,
lr_adminh TYPE REF TO cl_crm_bol_entity,
lr_root TYPE REF TO cl_crm_bol_entity,
lv_process_type TYPE crmt_process_type,
lv_parent_name TYPE crmt_ext_obj_name,
lr_current TYPE REF TO cl_crm_bol_entity.
lr_current ?= current.
lr_parent ?= lr_current->get_parent( ).
CHECK lr_parent IS BOUND.
CALL METHOD lr_parent->get_parent
RECEIVING
rv_result = lr_adminh.
CHECK lr_adminh IS BOUND.
TRY.
CALL METHOD lr_adminh->set_property
EXPORTING
iv_attr_name = '/itcit/F0010'
iv_value = lv_date. "value.
CATCH cx_sy_conversion_error .
ENDTRY.
TRY.
CALL METHOD lr_adminh->set_property
EXPORTING
iv_attr_name = '/itcit/F0011'
iv_value = lv_time.
CATCH cx_sy_conversion_error .
ENDTRY.
ENDIF.
Thanks
kalpana

Report of List of all status changes for various production orders at a tim

Hi,
Can I have a standard report which shows the dates of each and every status (user & system) of a production order.
I need to have a report for a list of productio orders at a time.
If we go to CO03, header menu, status changes option is there, but it only caters for single production order.
Table JCDS is available to know the dates but I need a standard one rather than a Z development.
Or you can guide me any function module.
Thanks,
Kumar

Hello,
You will get the details of status in following table.
JEST - for object status
JSTO - Status Profile
TJ02T - to Decode the status Number
as the status data you will get from JEST is in very typical form you have to use TJ02T to find the exact status
AM

Status Date Shows NA But Really Should Have a Designated Date

Hello all,
I receive project files on occasion from which I know have an active Status Date (SD). When I open the file, the SD will show NA, indicating a SD hadn't been designated.
I've come across this issue typically, it seems, when I open a file that originated or was saved on a 2010 version of Project (probably standard edition). I have been using primarily MSP Professional 2013 to manage my schedules. When I open the files on
a 2010 version of MSP, the SD will reflect that correct SD I should be seeing.
Is this a bug that's being looked into? A search on here did not come up with any answers to my particular question. Thanks in advance for any knowledge and help!
Jay M.

Hi Jay,
I cannot reproduce your issue. After saving a project with a SD in Project Pro 2010 SP2, I open it in MS Project Pro 2013 and the SD is still there. Which 2010 service pack are you using?
2010:
2013:
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Why does my signal drops and takes a long time to search and connect when I turn on or off my cellular data? And normal text messages are not getting delivered properly. It shows sent but later it will show try again, Is it just me?

I do not know what the problem is, but after the latest update it is really hard to send text messages. It is taking alot of time to send the messages, it is not the problem with the carrier because sending text messages with the same number in the same area is really easy on my normal nokia 1100. Please suggest me what I should check. Second problem I am facing is the carrier signal drops to nothing when I turn on the cellular data. It has to then search for the network and connect again the same happens when I turn the data off again. Please tell a solution. I do not think it is the problem with the hardware because the phone is hardly 2weeks old and everything was working properly with ios 6. It initaly had problem with the battery on updating to ios7 but that was rectified with the new update but again these are the new issues am facing.

This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

User status Date and time

Hi EXPERTS,
In notification when we change user status, system logs date and time in action log
I want to know in which table does user status date and time can be found.
Regards
Anil Kumar

Anil Kumar,
I'm not a t a system right now, but have a look at JEST and JCDS.
PeteA

Default Posting date should not be changed / Field status in FB01

Dear FI gurus,
In Transactions like FB01, MIRO, FB60, FB70 posting date is appearing automatically. But this date can be changed by the users. We want that the posting date should be made "Display only". How this can be done. Kindly guide.
thanks in advance.

Hello,
There is slight modification in the above mentioned answer:
Company code = XXXX
Check
Posting Date (BKPF-BUDAT) <> Current Date (SYST-DATUM)
Otherwise
Give the message number and E (Error)
regards

When updating to the latest OS X my wife's Mac Book Pro locked at a grey screen with an apple icon and status bar. Is there any way to recover the data on the laptop and complete the OS install?

When my wife's Mac Book Pro was being updated to the latest version of OS X the laptop locked up at a grey screen with the Apple icon and status bar. Is there any way to recover the data and complete the install? I have not tried anything yet because of the data issue. I am not sure which OS X version as I did not install the software.

Used Macs of every description are always available on Ebay and Craigslist and from a plethora of online used-Mac resellers. Apple sells refurbished late-model Macs at 10-20% discounts with a new-computer warranty and the opportunity to extend the warranty with AppleCare.
http://store.apple.com/us/browse/home/specialdeals/mac

Date Error on the Service Order while using service product

Hi PM experts,
I am working on the scenario resource-related billing, using service product in the service order created from a service notification linked to a contract with service product as the line item. service product is the material of DIEN material type.
when i was trying to save the service order created using transaction code-IW31, i am getting the Error Message:
" *SYS:Date 00.00.0000 not expected*".
This error started only yesterday, and it was not there before. Basis team has confirmed that they have not done any new
updates to the system.
Had anyone encounered this problem before, if yes kindly let me know the solution and the steps to resolve it.
thanks for the help.
regards,
rajaraman

Hi,
Here is the error description with message number,
SYST: Date 00.00.0000 not expected.
Message no. FGV004
As an update to this thread, while searching for the reasons for the problem, i found that the characteristics used in the
warranty class were carrying default date value as 00.00.0000. can this be a reason for getting this error as the service
product number which is a DIEN material type is linked to the master warranty which is in turn assigned to the equipment.
Hope this information helps.
regards,
rajaraman

Effective Date should appear Blank by default on SSHR Separation process

Navigation : Manager Self Service - Separation - Action Page - Termination Effective Date Options.
On this page the there is an option button "Change should take effect on the effective date as mentioned below".
Here by default the effective date appears as SYSDATE.
The requirement is that the effective date should appear blank by default. We tried using personalization, but its not possible.

By Separation I'm guessing you're referring to the 'Termination' MSS page where it defaults the Effective Date.
On this page the controller sets the Effective Date to sysdate - I don't know of any way you can blank this out without extending the delivered controller:
oracle.apps.pqh.selfservice.common.webui.EffectiveDateCO.class

Is there an easy way to filter a 2-d array based on the values of two of the fields?

Is there an easy way to filter a 2-d array based on the values of one of the fields. In my attached VI the output array has the following format:
TimeStamp        Ident                Frame Type        Bytes    Data
10:57:07.621   3AD00016   CAN Data Frame   8          0000000000000000
10:57:07.622   3AD00017   CAN Data Frame   8          000005E000000000
10:57:07.624   3AD00018   CAN Data Frame   8          0000000003300000
10:57:07.625   2DC00000   CAN Data Frame   8          0000000000000000
10:57:07.626   3AD00019   CAN Data Frame    4         0000030000000000
I would like to delete any rows that do not have an "Ident" between the values of 3AD00000 and 3AD0001E. So for the above data the fourth row would be deleted. The only way I can see to do it is to form a 1-d array. Is there a better approach?
Thank you.
Solved!
Go to Solution.
Attachments:
CMM_SN_MULTI.vi ‏20 KB

Hi chuck72352,
after you have sorted your data, you can use the InRange Function. Combined with a "search 1D Array" you'll get the range you really want.
Mike
Attachments:
ArraySubset.PNG ‏25 KB

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!
I want to know how to create a backup file (because I'm pretty new with itunes, and it's hard to use it for me still), how to store my app data/media/videos, etc. And how I can retrieve them back when I'm done with the app I tried on my friend's computer.
If anyone can help, it'd be great! Thank you so much!

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?

My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?

WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99.

Product Delivered Status Date should be there in Standard Search and Result screen of Service Order. Product Delivered Time should be Available in Result screen and In Result screen there should be facility to filter on basis of Time

Similar Messages

Maybe you are looking for