Product drilldown reports - Not linked when selecting call up functionality

hi all,
i running the tgt/act/var cumulative report (s_alr_87013139) and values are showing as expected, but when i try to view the order involved in the material, by selecting the material number and click on the "call up report" functionality, system will be showing the "no records selected" message. Any idea why this is happening? Thanks
Regards
Mg

Hi,
You should check that there are only two summarisation levels for each Cotrolling area (for reports with material number and without) - please see the note 422543. For some (unknown) reasons sometimes there are more than two levels per controlling area in the system. The drill down report then tries to read from the wrong level and can't find any data.
If you have more than two in one controlling area you should delete them (within TA KKDV). If the results in the drill down report are not correct afterwards, you should delete all levels and run TA KKRV (data collection) again afterwards.
Regards,
Declan

Similar Messages

My phone will not ring when a call is coming in? Please help?

My phone will not ring when a call is coming in.?

Yeah, because if the switch isn't on, the phone is put on vibrate.

Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.

Will not ring when income calls

I have tried with Verizon to get issue of phone will NOT ring when a call comes in. Have checked settings and all seem correct. Help

Call *73 to insure your phone is not forwarded. Is it all calls or a specific number?

My hp4530s wifi switch does not enable when selected

hp4530s with windows 7 prof. The wifi switch does not enable when selected in mobility manager in the control panel. The option is shown, however is grayed out and does not enable the wifi

Hi,
When was the last time that WIFI worked on the HP4530s? If you aer using a dock, then remove the laptop from the dock.
You can check the status of the WIFI adapter in Device Manager. You should have something similar to the below image if your model is equipped with WIFI.
The HP Support Assistant and also be used to troubleshoot network issues.
Look under the Internet and Security topics in HPSA for the adapter.
Try diagnostics under the My computer tab in HPSA
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HT201401 I have set the ringer for my phone, and it is on according to settings, but does not ring when a call is received. How can I fix this?

My phone does not ring when a call is incoming. How can I fix this?

You might try restarting your device, your router and your Apple TV.

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic? Is this possible?

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?

You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.

How to develp a subreport in the same page of the main report and processed when is called

SSRS 2012
Hi guys,
I am developing a report that includes a subreport.
therefore The report is made up by 2 sections:
1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info (Each row represent a specific item)
2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
for the main reports).
3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
Thanks for your help.

Hi Fasttrack2,
According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
Reference:
Troubleshooting Reports: Report Performance
Drillthrough, Drilldown, Subreports, and Nested Data Regions
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.

Parameter weirdness: Report not using user selected parameter value

I am writing my first report and cannot for the life of me figure out how to deal with this issue.
When I call a report and pass the parameters in, it appears that the user cannot then change the parameter values and run the report again even though the parameters are displayed. When user hits run report, the values revert to what was passed in by original
call.
Scenario
Report B has Parameter Period : Month, Quarter, Year displayed in a drop down list.
Report A calls Report B and passes it the parameter: Quarter.
Report B loads. User now changes parameter to Year via the drop down parameter list and hits Run Report.
Instead of loading the report with user selected value (Year), it reverts back to the parameter it was called with, Quarter.
I have tried changing the refresh option on the parameter to always, but no joy.
The only way that seems to work is to put textboxes on the report to change the parameter.
How can I stop this behaviour, and use the users new selection.
This should be really straight forward, and its driving me nuts that its not allowing the user to change the parameters
Any help would be much appreciated.
Thanks Jon

Hi Jon,
Did you use SSRS 2012? Based on my test, the issue is occurred in SSRS 2012 Business Intelligence Development Studio (BIDS). When we deploy the report to report server, it will disappear.
In this situation, we can add another duplicate parameter to work around this issue. Please add two parameters in the report, and then hide one of the parameter. We can pass the parameter value to the hide parameter. If we want to select other values, we
can change the visible parameter values.
Alternatively, I recommend you that submit this suggestion at
https://connect.microsoft.com/SQLServer/. If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the
level of service provided.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

COOIS report: not able to select operations based on work centers

Hi All,
When accessing the COOIS report using operation listv& selecting the std profile.I need to get the operation perfomred on specific work center.
I enter the work center & plant code in the selection fields available in the "select at operarion level" & i get the all the work center.
Need to get list of operation performed at the entered work center.
The requirement is due to the reason that a order is performed in two or three production facilities & production guys needs to look at operation list for given work centers.
Regards
Vineet

Hi,
This one of the options we had explored, but it would be better if we can get the report by work center. The focus is to reduce the effort to get the report as there is need to get the same report for atleasr 8to 10 different group of work centers ( which are not in serial nos).
We would then need to put the work centers in the filters & save the layout.
Regards
Vineet

Detail region does not refresh when selecting from a drop-down list in master region

I am using DW CS3 and have updated to version 1.6.1 of Spry. Using an XML dataset, I am able to create a Spry table as the master region that links to a detail region that displays a small JPG graphic. It works fine in this format (clicking on a row displays the correct graphic). However, my table has 80 rows and requires the user to do too much scrolling. So I changed the master region to a drop-down repeat list, but the graphic does not change when a new selection is made in the drop down list. Listed below is the code produced when I used the insert Spry Repeat List. I got the same results when adding a spry:setrow="dsChartNurse". I also tried -- onclick="dsChartNurse.setCurrentRow('{ds_RowID}');" -- which again made no difference.
When I removed children from the spry:repeat, the master region displayed as a two column list of all 80 items in a drop-down list format.
<div spry:region="dsChartNurse">
       <select name="select" spry:repeatchildren="dsChartNurse">
         <option value="{name}">{name}</option>
       </select>
</div>
<div id="image" spry:detailregion="dsChartNurse">
   <img src="{dataimage}" align="center" style="margin:50px 0 0 0"width="320" height="164" />
</div>
Thanks so much to anyone who can help correct my code in order to have a drop-down list display information correctly in the detail region.

Thanks for the quick reply. I did solve the problem I was having by changing from onclick to onchange in the master region. But, now I have another problem with, of course, IE. I just put in online at http://www.minursemap.org/ageDistNurse.html. When opened in IE, the drop down list displays the last entry, but the image is for the first in the list. Thanks again for your help.

LabVIEW PDA reports COREDLL.DLL error when using Call Library Function Node

I'm trying to build a LV PDA app that calls an external DLL file built using embedded visual C. When configuring the Call Library Function node I select the stub DLL, configure the I/O parameters and select OK. When the configuration dialog closes I get the following error:
LabVIEW: LabVIEW.exe - Unable to Locate Component
This application has failed to start because COREDLL.DLL was not found. Re-installing the application may fix this problem.
I do not get this error when using the configuration dialog in the example VIs.
Any suggestions as to the cause and/or the solution?
Thanks,
Ryan

Hello -
When you create a PDA VI that calls a DLL, you must include the .c or .lib file that corresponds to the DLL. Take a look at these documents:
LabVIEW PDA Module Build Errors with VIs that Call DLLs
Why Do I Receive Errors When Calling a C++ DLL from a Call Library Node Using the LabVIEW PDA Module...
How To Call External Code in LabVIEW PDA for Palm OS
H
ow To Call External Code in LabVIEW PDA for Pocket PC
Hope this helps!
S Vences
Applications Engineer
National Instruments

Why does item in drop down address not delete when selected and right click on delete

on version 14.1 - to delete an item in dropdown address box, told to put item in address line the right click and select delete - this clears address line but item remains in drop down box and does not go away -why does item not clear when returning to drop down to check on this
system is XP and ff 14.1

dud the maintenance add on link you noted - sorry to say problem is the same - when trying to delete an item in the drop down list, i put it in the address line then right click and click delete - it clears from address line but it does not clear from the drop down list ---- please define in detail how to get item cleared from address line to also clear from dropdown list - thank you for your patience - I would simply like to clean up and unclutter the dropdown list without deleting entire history ---thank you

Sometimes E61i is not ringing, when somebody calle...

Hi,
I purchased Nokia E61i Phone in USA recently and update the firmware. After update the the firmware, sometimes my phone is ringing when somebody called. The calls are displayed in missed calls list. Due to that I am loosing my incoming calls. Could you please let me know how to resolve the issue.
Regards
Peddi
Message Edited by peddi on 17-Jul-2008 08:27 PM

Try this - it won't erase any of your settings, but it may clear up the buggy behavior:
Power down phone
Hold volume up/down & power simultaneously until you see the Boot Mode Selection Menu
Use volume down to navigate to 'Recovery', use volume up to select
Should see screen with triangle and exclamation point next to an Android
Press volume up/down simultaneously to go into system recovery
Use volume rocker to navigate to 'wipe cache' and use power button to select
Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select
Post back and let us know if this did the trick. If not, we can look further...

Apps not working when selected in App folder on Dock

The application folder on Dock opens but when I select an app by clicking on it, the app doesn't open/run.
What can I do so that the apps run when selected in dock?
Thanks for your help.
Vernon

When I installed Snow Leopard on my iMac, two folders did not appear on the dock that Snow Leopard installed on my MBPro: the Applications Folder and the Documents Folder.
Someone suggested that I drag those folders from the sidebar to the Dock which I did.
However, now when I select either one of those folders and then select an application or a document, neither run/appear.
How can I run an application I select or open a document that I select from the folders on the Dock?
Thanks for your help.
Vernon

Product drilldown reports - Not linked when selecting call up functionality

Similar Messages

Maybe you are looking for