Product: HP Pavillion dv5 Operating System: Windows 7 64-bit Problem: Smart Hard Disk Error

Product: HP Pavillion dv5
Operating System: Windows 7 64-bit
Problem: Smart Hard Disk Error
Disk Name: WDC WD3200BEKT-60V5T1
How do I fix this error?

Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Product: HP Pavillion dv5 Operating System: Windows 7 64-bit Problem: Smart Hard Disk Error Disk

How do I fix Smart Hard Dtive Disk Error WDC WD3200BEKT 60V5T1

Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Have Pavillion g7-1075dx running windows 7 (64-bit). SMART Hard disk error comes up on startup.

I've run the hard disk test and is says hard disk 1 failed. tried system restore twice comes up with same error. What are my options. I do not have a recovery disc

Hi,
You may well need to replace the Hard Drive.
Is your notebook still under warranty?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Smart Hard Disk Error on windows 7 notebook

I have a Hp Mini 2100-2190NR running windows 7.
I've had a problem recently where i could not boot windows. I got it fixed using a USB recovery disk.
When i start my computer i get a Smart Hard Disk Error message.
It says it has detected an imminent failure and to back up the content immediately and run the hard disk test in system diagnostics.
Once i run the tests, some got me errors and could not complete them.
I tried using a system restore back to a date and i was able to log into windows. The next day same problem occured and tried another system restore and nothing happened.
Im stuck at the black screen with the microsoft corporation loading bar.
How can i fix this problem?
This question was solved.
View Solution.

Hi,
The Smart error message would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the start-up issue.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Imminent hard drive failure detected ; product name : F2C07PA#ACJ ; operating system : windows 8.1

dear sir,
i need urgent help!! my laptop says that it has detected an imminent hardware failure although it hasn't even been 6 months since i bought it. i ran the system diagnosis for
system and component damage, as prompted by the system. the SMART test was passed but the test for hard drive 1, failed.
failure ID is : RU76X3-6RG733-MFPWXF-61UB03 .
product no. : F2C07PA#ACJ
i have had my data backed-up, in case things go worse and i am currently trying to defragment the hard drive. but it will only buy me some time.
may i please know, if there is any way i can get things back to normal without spending any money ( more preffered). and if 'no' then how much it would cost me to get a new hard drive..
thanking you in anticipation.
This question was solved.
View Solution.

Contact HP.
As long as your notebook is in warranty you will be provided with a replacement hard disk at no additional cost. Having an active warranty is a good thing.
You will need the recovery media that you should have already created to recover your notebook to the state it was delivered in once you install the replacement hard disk.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do I install the operating system Windows 7 on a new hard drive?

Good morning ¿ how I can install windows 7 home premium on a new hard drive?, Disk damage has my laptop windows 7 home premium 32 bit and I have to buy a new hard drive, but not as I have already installed the new because I do not have installation CD because it is laptop, thanks. My laptop is a satellite L455-S5975 .
For I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
My English is not very good, excuse me if I do not understand.

Satellite L455-S5975
I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
There is no opportunity to download it, Richo. Your best bet is to have an acquaintance in the USA, Latin America, or Canada order the recovery discs and ship them to you.
-Jerry

Error: The Operating system Windows Vista Version 6.1 is not supported

While installing Oracle Database 'win64_11gR1_database_11070' on Windows Server 2008 R2,x64, I get this error during Product specific pre-requisite checks:
"The Operating system Windows Vista Version 6.1 is not supported. Install the recommended service pack"
Edited by: aa100 on 16-Jun-2010 09:04

What's not clear with this message? Windows 2008 R2 requires 11gR2:
http://www.oracle.com/technology/software/products/database/oracle11g/112010_win64soft.html
Werner

Operating System(Windows 7) got corrupted ..!

Hi all,
Can someone please help me with my laptop issue ???
My Laptop Details :
Product name         : HP Pavilion dv6 Notebook PC
Operating System : Windows 7 Home Premium
RAM                             : 6GB
Processor                  : Intel(R) Core(TM) i3 CPU [email protected](2400MHz)
Purchase                   : Decemeber, 2010.
My Laptop problem :
My HP-laptop got infected with "virus" ( it says like found 38 virus).
And because of this virus attack , I was NOT able to open any application , for example say if i try to open "notepad" - then throws a message like " unable to open notepad application, though infected with virus".
So with this , i can confirm that my laptop was NOT allowing me to open anything because infected with virus.
Now i have 2 options to go further :
1) Remove virus , using antivirus removal software ( This i don't have , so NOT attempting to use)
2) Recover thru recovery option.
When i purchased this laptop , the laptop contains recovery partition within the laptop , so it's a built-in option.
Though i was NOT interested to keep that recovery partition in my laptop, I just burned recovery manager into 7 DVDs, and then deleted the partition.
With this my laptop contains drives like :
C: drive --> this contains OS related stuff
D: drive --> this contains my general stuff like songs , movies , etc
System drive --> 199MB ( not sure what thid contains )
Now coming to original problem/issue -
I have planned to use recovery DVDs , to recover to factory state.
Started with 1st DVD , it went upto 18% and then asked me to insert 2nd DVD.. and this went upto 30%.. now again asked me to insert 3rd DVD.
With 3rd DVD.. it went upto 40% , and then stopped responding. Nearly I've waited for about 3 hrs.. but NO use.. it's still hanged at 40% only.
So with 3rd DVD , it got hanged or stopped.
My doubt - not sure whether my 3rd DVD got corrupted or not , but i don't think so.. because 3rd DVD worked for atleast 10%..
Finally , I was struck here...
Not sure what's my next step
Please help me what I have to do now, like what steps to take... etc
How to recover?
Thanks
Kiran

Hi,
Lets start with your providing the complete product name or product number.
HP has produced and brought to market perhaps more than 10,000 models of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which one you own and which operating system is installed.
Method #1: If the notebook will boot into Windows you can retrieve your Product Number by pressing Fn + Esc key. You can also read the Service Tag (if present) attached to the bottom of your notebook\netbook.
Method #2:
Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name. Please post one or both of them (with all alphanumeric characters here). If you live outside of North America, it helps us if you post the country of purchase.
Were you using an antivirus product (free or paid) when this issue happened?
What was the brand and product name of the Antivirus product?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Booklet Printing on HP Laser Jet M1005, Operating System Windows &

Hi ,
I have
PRINTER - HP Laserjet M1005 MFP
OPERATING SYSTEM - WINDOWS 7
Question -
1) I want to print Booklet by this printer?
2) When trying multiple pages on 1 page with printing on both side, then first side come perfectlly but backside comes with upside down.

Hi 27anand,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this by clicking the following link: Printers - LaserJet.
Hope this helps, have a good one!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Opening an operating system window from Forms

An old feature from SQL*Forms was that you could open an Operating System Window by pressing a function key (or combination of keys)
I think this is still available in Oracle Forms 10g, but I can't remember which function key to press.
Can anyone help? I know that the function keys can vary across systems, so that I'm looking for is the default key (or keystrokes). I don't think it matters which versions of software are being used, but in case it does, the setup is:
Oracle Forms: 10gR2
Client PC: Windows XP
Client Browser: Internet Expolorer 6
Application Server: 10GR2 on Windows Server 2003
Database Server: 10gR2 on Windows Server 2003
The database has the ORAFORMS$OSC role granted to PUBLIC, and the "<OSC>" flag is showing in the Forms Console.
Control-K gives a list of the function keys, but doesn't list anything for opening a DOS window:
As far as I know, frmweb.res has not been altered, but it doesn't list an option for opening an OS window anyway.
This is not about the HOST command.
Thanks, Martin

Hi michaeltowse,
This is indeed something more complicated. Let me give you
some details about the project:
This project is to be initially created in Adobe Captivate.
It consists of the main menu that is to be created in Flash (menu
1); sub-menus, which are to be created in Captivate (menu 2); and
menus of sub-menus, which are to be created in Captivate as well
(menu 3). Now, the part where I need help on is the part that goes
from sub-menus (menu 2) to menus of sub-menus (menu 3). When any
option is to be selected from the sub-menu (menu 2), a new window
is suppose to pop-up (menu 3) that is suppose to be in Flash. This
new window is suppose to be a new Flash window and is not suppose
to be opened in a browser, but it's suppose to be opened in another
Flash window (SWF window). This whole entire project is to be
executed via an embedded Flash executable. Thus all the .SWF files
that were created in either Captivate or Flash are to be tied
together via a Flash executable. I was told in Captivate's Forum
that this may be done via ActionScript in Flash and I'm wondering
whether that is that case. Please tell me if my project makes
sense.
Thank you.

The up down arrows on the side of my Hotmail email list do not function, nor does clicking the space above and below the slider bar. These functions work in all other cases. It began with Firefox 3.6 upgrade. Firefox version: 3.6 Operating system: Windows

The up down arrows on the side of my Hotmail email list do not function, nor does clicking the space above and below the slider bar. These functions work in all other cases. It began with Firefox 3.6 upgrade.
Firefox version: 3.6 Operating system: Windows XP
== This happened ==
Every time Firefox opened
== After upgrade to Firefox 3.6

See https://bugzilla.mozilla.org/show_bug.cgi?id=511075 - The arrows of the scrollbars don´t work in hotmail
Should be fixed in the next release Firefox 3.6.4

Have a question to ask ... I bought, at the time, the update of Adobe Audition CS6, being already in possession of the CS5.5 version. Since I had to redo the operating system (windows 7 professional 64-bit), reistallando program CS6, with the correspondi

have a question to ask ... I bought, at the time, the update of Adobe Audition CS6, being already in possession of the CS5.5 version. Since I had to redo the operating system (windows 7 professional 64-bit), reistallando program CS6, with the corresponding serial number in my possession, I noticed a malfunction that is:
importing a musical motif and starting the program, clicking on play, I do not play any pattern or song despite being in operation.
I reinstalled the program, but without any result. What do I do? Thanks.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.When i start it the browser is not open and appears a message
Mozilla Crash Reporter
== Crash ID(s) ==
20100611143157
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)

the 20100611143157 is an update which won't instal automatically on my notebook

Computer crashed. Had to rebuild. Everthing loaded and working properly except itunes. Operating System Windows 7, Home Premium. Itunes was downloaded and installed. Itunes will open, but not connect to internet. No itunes store, CD artist, name of songs.

Computer crashed. Had to rebuild. Everything loaded and is working properly except itunes. Downloaded itunes and installed. Will not connect to internet. Keeps on trying to connet to itunes store, but never connects. If I insert a CD all I get is the track number. No artist or song information. Operating System Windows 7 Home Premium.

Hello Rachet Jaw,
Thank you for the details of the issue you are experiencing with iTunes. I found a few articles I suggest for the issue you described.
If you are getting a white screen when accessing the iTunes Store, I recommend reviewing this article:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
If you are still not able to access the store or are getting a different error than just a white screen, I recommend the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M.

Product: HP Pavillion dv5 Operating System: Windows 7 64-bit Problem: Smart Hard Disk Error

Similar Messages

Maybe you are looking for