Product in a card of the business partner (transaction BP)

Hi everybody!
Help me, please!!!)
I created product and business partner. I need see this product in a card of this business partner (transaction BP). How can I do it?
For example, the Bank ### has the product "Deposit". The client of Bank ## Mr. Smith uses this deposit. How can I display this fact in a card of the business partner of Mr. Smith?
Thanks)

Hello!
Usually Products are not related to the Business Partner directly. Only Competitor Products are displayed in the Account Overview-Page, if the Account has the Role u201CCompetitoru201D.
In your use-case the u201CBank ###u201D is not your internal organization, but any Account. Now you want to display in the Overview-Page of Mr. Smith, that he uses a Product of Bank ###.
Right now, I donu2019t see an option to visualize this. The Account Fact-Sheet includes also Installed Base Information, but this doesnu2019t include information about Products of u201Canyu201D Account (only own Products or Products a service contract is available).
Best regards
Arno

Similar Messages

Change the Business Partner details

Hi All,
I have to change the credi control details and credit limt(esp. Rules) of the Business Partner (transaction is BP) depending on some creteria.
Could you please provide any BAPI or a function module to change these details.
Please, the BADIs which would trigger when this transaction is executed.
Can send your guidence/solution to my mail "[email protected]".
Thanks in advance.
Thanks and Regards,
Ramana Malladi.

Murali-
We have seen this issue in the past - if you are on SRM 5.0 a note exists to correct the action - however if you are on SRM 4.0 I think you are going to be stuck. Anyway see OSS note 881695 - Source of supply with item changes.
As described if you change plant(location), the product category or the unit of measure the source of supply will be re-determined.
We have previously requested this note to be down-ported to SRM 4.0 but the request was declined as it apparently would require significant changes.
Hope this helps.
Regards-
b

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

Possible to change the business Partner from a created Contract in ICWEB??

Hello experts,
I would like to know if it is posible to change the BP from a created contract in ICWEB.
I check the option "CONTRACT MANAGMENT" and there is an option to change the premise with the button "Move To Other Premise" but I don't find an option to change the Business Partner from a created contract.
Can you help me, please??
Thank in advance.
Edited by: Javier Garcia on Aug 19, 2008 7:01 PM

Hello S Reddy and a lot of thanks for your help.
But I don't know where I can select this option, there isn't the where I can associate the option in customizing or what transaction. Could you explain me with more details, please ??
Thanks in advance.
Regards.

Urgently, how to use the EEWB to ad new field in the business partner page

Hello All
I am working on CRM 5.0 EEWB
I am trying to add new field in the business partner page I followed the steps for creating the project and the extension but I faced some problems
1-I chose the package BBP_BUPA_MAIN BBP Business Partner General
I created two transport requests for the workbench and the customizing
2- I created an extension with EEW Bus. Object: BUPA and extension type: ADD_NEW_FIELDS
3- I got an error that <b>"Object DOMA ZBU_009XN27S is in the name range reserved for customers. The object cannot be assigned to package BBP_BUPA_MAIN, since it belongs to a different name range or namespace"</b>
I tried to change the package but the same problem occurs and if I choose a custom made business package I get a similar error but, before the wizard starts
I want to know the exact steps to create new field using the EEWB
Regards
Jacopo Francois

Hi,
Error info: "Object DOMA ZBU_009XN27S is in the name range reserved for customers. The object cannot be assigned to package BBP_BUPA_MAIN, since it belongs to a different name range or namespace"
Clearly states that you need to assign some different name to the package which is not reserved by SAP as Z### is already reserved by SAP and thus you will not be able to create the enhancement in the same.
Best Regards,
Pratik Patel
<b>Reward with Points</b>!

What is the use of the business partner cockpit ?

Hello All
What is the use of the business partner cockpit ?
Regards
Jacopo Francois

Hi,
BP cockpit is also called as BP factsheet. It gives the 360 degree view of the BP transations. Its a BSP application on GUI. To enable the factsheet you will have to activate the relevent BSP services in sicf.
For more informatio refer
http://help.sap.com/saphelp_crm50/helpdata/en/8d/b65a42a0836255e10000000a155106/content.htm
Reward points if helpful.
Shridhar

Enter at least one number for the business partner

Hi Experts,
SRM 5
Classic scenario
R/3 4.6c
I am trying to execute users_gen transaction for integrating the user with the org. structure. However upon doing so I get an error message "Enter at least one number for the business partner"
Please provide pointers on the cause for this and how it can be rectified.
Thanks.
Regards,
Amish

Hi Muthu,
I am integrating a single user at a time - through users_gen.
Infact I am getting the same error message while moving the users within the org. structure.
Steps -
1. Execute users_gen
2. Select the user to be integrated
3. Click execute check mark
Please provide any pointers.
Regards,
Amish

How the business partner data is created in EB

Hi
How the business partner data is created in EB ( SRM).
thanks
sankar

Hi,
I imagine you would like to synchronize business partner data, which are created in backend, into SRM.
you can use Tcode BBPGETVD or BBPUPDVD or run/schedule bbp_vendor_sync (need customizing).
Regards,
Bertrand

Regarding chossing the Business Partner Master Data

Dear All,
I have one query regarding chossing the Business Partner Master Data. Let take an exapmle
suppose 2 sales person are making the sales Quotation and every sales Persons only making the quotaion
for the specified leads or customers.Suppose Sales Person 'A' makes the quotaiton for 5 Leads and Sales
Person 'B' makes the quotation for the different 5 persons.Now i want when i Login into sales person 'A' Login
and choose the Business Partner by pressing tab in sales quotation window , then that Sales Person 'A' can
see only the Specified BP list which are belonging to his region.
Thanks All.

The access to Item Master and BP Master cannot be restricted to Users through Authorization. This is a known limitation of SBO.
You can try this by using SDK.
You can use Data Ownership Authorization, which means the marketing documents created by Sales Person 'A' will not be viewed by Sales Person 'B'
Refer this thread for details
[Customer master restriction in Marketing document.........;

Hiding the business partner search parameter from search criteria

Hi,
I have business partner search parameter whose value is hardcoded in the lead search..
I would like to hide the business partner search parameter from displaying only..
I need to achieve it programatically and not in configuration and all.
Do I need to write the code in P method or which method?
Thanks
Madhukar

Hi,
The code is as below and I just need to have the functionality of BP search field intact but hide it from display in web UI..if any correction is required let me know..
***current date is populated into LV_DATE
DATA lv_date TYPE string.
lv_date = sy-datum.
***current user login name is populated into LV_SUNAME
DATA lv_suname TYPE string.
lv_suname = sy-uname.
***Fetching the BP ID of the current user who logged into L_PARTNER
DATA:l_partner TYPE bu_partner.
CALL FUNCTION 'CRM_ERMS_FIND_BP_FOR_USER'
    EXPORTING
      iv_user_id = sy-uname
    IMPORTING
      ev_bupa_no = l_partner.
***structure for BUT051
TYPES : BEGIN OF ty_data,
           relnr    TYPE bu_relnr,
           partner1 TYPE bu_partner,
           partner2 TYPE bu_partner,
           date_to TYPE bu_datto,
         END OF ty_data.
***work area for BUT051
DATA wa_but051 TYPE ty_data.
***Fetching Dealer BP ID which is 'PARTNER1' field in BUT051
SELECT relnr
         partner1
         partner2
         date_to
FROM but051
INTO wa_but051
UP TO 1 ROWS
WHERE partner2 = l_partner.
ENDSELECT.
***Geting the dealer BP ID into LV_DEALER
DATA lv_dealer TYPE string.
lv_dealer = wa_but051-partner1.
DATA: lr_qs          TYPE REF TO cl_crm_bol_dquery_service,
        lr_search_node TYPE REF TO cl_bsp_wd_context_node_asp,
        lr_col         TYPE REF TO if_bol_bo_col ,
        lr_iterator    TYPE REF TO if_bol_bo_col_iterator ,
        lr_param       TYPE REF TO if_bol_bo_property_access,
        ls_selection   TYPE genilt_selection_parameter,
        lv_low         TYPE sy-datum,
        lv_attr_name   TYPE name_komp ,
        lv_value_set   TYPE abap_bool .
IF iv_first_time EQ abap_true.
* to initialize the search view.
    CALL METHOD super->do_prepare_output
      EXPORTING
        iv_first_time = iv_first_time.
* fetch the search node and its content.
    lr_qs = me->get_current_dquery( ).
    lr_col = lr_qs->get_selection_params( ).
* check the currently visible search attributes.
    lr_iterator = lr_col->get_iterator( ).
    lr_param    = lr_iterator->get_first( ).
    WHILE lr_param IS BOUND.
* get the parameters
      lr_param->get_properties( IMPORTING es_attributes = ls_selection ).
      IF ls_selection-attr_name = 'VALID_FROM'.
* SET_PROPERTIES
        ls_selection-low = lv_date.
        CALL METHOD lr_param->set_properties
          EXPORTING
            is_attributes = ls_selection.
        lv_value_set = abap_true .
        EXIT.
      ENDIF.
      IF ls_selection-attr_name = 'BU_PARTNER'.
* SET_PROPERTIES
        ls_selection-low = lv_suname.
        CALL METHOD lr_param->set_properties
          EXPORTING
            is_attributes = ls_selection.
            lv_value_set = abap_true .
        EXIT.
      ENDIF.
      lr_param = lr_iterator->get_next( ).
    ENDWHILE.
    IF lv_value_set EQ abap_false .
* it was not part of the visible attributes, then add it at the end.
      CALL METHOD lr_qs->add_selection_param
        EXPORTING
          iv_attr_name = 'VALID_FROM'
          iv_sign      = 'I'
          iv_option    = 'EQ'
          iv_low       = lv_date.
      CALL METHOD lr_qs->add_selection_param
        EXPORTING
          iv_attr_name = 'BU_PARTNER'
          iv_sign      = 'I'
          iv_option    = 'EQ'
          iv_low       = lv_dealer.
    ENDIF.
* for a proper display of the added / changed attribute.
    lr_search_node = get_dquery_cnode( ).
    lr_search_node->build_parameter_tab( ).
ELSE.
* non first time call - just delegate to superclass.
    CALL METHOD super->do_prepare_output
      EXPORTING
        iv_first_time = iv_first_time.
ENDIF.

How to read the business partner activity

Hi experts,
How to get the business partner(role:employee) assigned activities in crm and how to create the activity .my requirment is change the assiged from old employee(bp) to new employee(bp). i have to develop the program. i searched some BAPI's.
Please help on this.
thanks,
venu.

Pls use the FM CRM_REPORT_CALL_RF. Pass the partner function to the exporting parameter table ir_partner_fct_h and partner number to the partner number to ir_partner_id_h . You will get all the guid and then use CRM_ORDER_MAINTAIN to change the partner.
CALL FUNCTION 'CRM_REPORT_CALL_RF'
    EXPORTING
      iv_stat_open            = 'X'
      iv_maximum_hits         = ' '
      ir_object_type_h        = it_act_objtype
      ir_partner_fct_h        = it_partner_fct_h
      ir_partner_id_h         = it_partner_id_h
    IMPORTING
      et_guidlist             = it_guid
    EXCEPTIONS
      parameter_error_partner = 1
      parameter_error_items   = 2
      parameter_error_ref_obj = 3
      OTHERS                  = 4.

Add custom fields to the business partner (UKM_BP) thru BADI

Hi
I want to know how to add Additional business partner attributes(custom fields) to Business partner (Transaction : UKM_BP)
I also added the custom fields to structure UKM_S_BP_CUSTOMER_EXTENSION in the method FILL_FIELDS of BADI UKM_BP_ADD_FIELDS, But nothign is populating on the screen of UKM_BP after activating the below BADI's with SAP provided sample code with above structure.
there are 2 BADI's for this requirements but it doesn't any thing about the screens
UKM_BP_ADD_FIELDS
UKM_EV_FORMULA
Please let me know the detailed steps other than activating these BADI's with sample code by SAP.
Thanks
Govi

Thanks for your reply
BADI - UKM_BP_ADD_FIELDS
Documentation of this BADI shows as follows...
With this BAdI, you can define additional business partner attributes that you define in a business partner master record and want to use as fields in the formula editor.
To use the new fields, implement the BAdI: Formula Parameters and Functions (UKM_EV_FORMULA)
Methods of this BAdI:
FILL_FIELDS
To provide additional fields for the formula editor
FILL_ADD_INFOS and SAVE_ADD_INFOS
To define additional information for the following data in table form:
Collateral
Negative event
Check exceptions
Credit insurance
I enhanced the structure(UKM_S_BP_CUSTOMER_EXTENSION) with new custom fields from the badi UKM_BP_ADD_FIELDS but there is documentation for creating the new screen to place those new fileds i created on transaction UKM_BP.
I have looked at BDT Business data toolset
http://help.sap.com/saphelp_crm50/helpdata/en/2f/696d360856e808e10000009b38f839/frameset.htm
but i didn't get any idea ...
Can you please elaborate and let me know how to do this for my requirement?
Thanks
Govi

Trying to update the business partner using BAPI_BUPA_CENTRAL_CHANGE

Hi all ,
i am tryibg to create a function module which updates the first name, last name, email id of the business partner that i already created. the return table shows zero entries and i dont find any udate being done for the business partner if i go and check in the respective table. can some one tell me what is the problem.
Import paramters for my function module are business partner number, first name, last name, email -d.
FUNCTION Z_CHANGE_BP2.
""Local Interface:
*" IMPORTING
*"     VALUE(CUST_NO) TYPE BU_PARTNER
*"     VALUE(FIRST_NAME) TYPE BU_NAMEP_F
*"     VALUE(LAST_NAME) TYPE BU_NAMEP_L
*"     VALUE(EMAIL_ID) TYPE AD_SMTPADR
*" TABLES
*"      IT_RETURN2 STRUCTURE ZRETURN1 OPTIONAL
*"      IT_RETURN4 STRUCTURE ZRETURN1 OPTIONAL
Defining the internal tables used in BAPI BAPI_BUPA_CENTRAL_CHANGE.
DATA: it_CENTRALDATA TYPE STANDARD TABLE OF BAPIBUS1006_CENTRAL WITH HEADER LINE.
DATA: it_CENTRALDATAPERSON TYPE STANDARD TABLE OF BAPIBUS1006_CENTRAL_PERSON WITH HEADER LINE.
DATA: it_E_MAILDATANONADDRESS TYPE STANDARD TABLE OF BAPIADSMTP WITH HEADER LINE.
DATA: it_RETURN1 TYPE STANDARD TABLE OF BAPIRET2 WITH HEADER LINE.
DATA: it_RETURN3 TYPE STANDARD TABLE OF BAPIRET2 WITH HEADER LINE.
****Values for seacrh term1, search term2 of it_CENTRALDATA
it_CENTRALDATA-SEARCHTERM1 = FIRST_NAME.
it_CENTRALDATA-SEARCHTERM2 = LAST_NAME.
APPEND it_CENTRALDATA TO it_CENTRALDATA.
first name, last name of it_CENTRALDATAPERSON
it_CENTRALDATAPERSON-FIRSTNAME = FIRST_NAME.
it_CENTRALDATAPERSON-LASTNAME = LAST_NAME.
APPEND it_CENTRALDATAPERSON TO it_CENTRALDATAPERSON.
Value for E_MAIL of it_TELEFONDATANONADDRES-
it_E_MAILDATANONADDRESS-E_MAIL = EMAIL_ID.
APPEND it_E_MAILDATANONADDRESS TO it_E_MAILDATANONADDRESS.
Call the BAPI BAPI_BUPA_CENTRAL_CHANGE
CALL FUNCTION 'BAPI_BUPA_CENTRAL_CHANGE'
EXPORTING
    BUSINESSPARTNER      = CUST_NO
    CENTRALDATA               = it_CENTRALDATA
    CENTRALDATAPERSON = it_CENTRALDATAPERSON
TABLES
E_MAILDATANONADDRESS = it_E_MAILDATANONADDRESS
    RETURN                             = it_RETURN1.
Call Commit work
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT          = 'X'
IMPORTING
RETURN        = it_RETURN3.
ENDFUNCTION.

Hi,
Pass values to the Parameter CENTRALDATA_X   in your FM 'BAPI_BUPA_CENTRAL_CHANGE'
Something Like:
CALL FUNCTION 'BAPI_BUPA_CENTRAL_CHANGE'
EXPORTING
businesspartner = bpartner
centraldata = centraldatadetail
centraldataperson = centraldataperson
CENTRALDATAORGANIZATION =
CENTRALDATAGROUP =
centraldata_x = centraldata_x
centraldataperson_x = centraldataperson_x
CENTRALDATAORGANIZATION_X =
CENTRALDATAGROUP_X =
TABLES
return = return.
Refer to:
problem with 'BAPI_BUPA_CENTRAL_CHANGE'
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bapi-bupa_central_change-need-help-549117

Photograph of the Business Partner

Hi ,
We want to exhibit the photo of the Business Partner at the UI view and at the pdf of the fact sheet.Though its possible to attach the photograph which will be available as link but requirement is show everytime when the detailed screen of that Business Partner opens.
Regards,
Chaturvedi

Hi,
You can have the required changes like Photograph of the BP on SAP WEB UI instance by making changes at Runtime Repository Editor Tool TCODE: BSP_WD_CMPWB. And also new fields may have to be added to the Web UI to meet business requirements. This should be done always using SAP delivered tools like Easy Enhancement Workbench EEWB,Application Enhancement Tool AET(available from CRM 7.0). Append Structures should be used only in a case above options are not available for a Business Object.

The visit frequency specified for the business partner

Hi.
Anybody knows how I can specificy the visit frequency specified for the business partner ?
CRM Mobile 5.0
Thanks.
Antonio.

ok, in transaction FPP3, for a given business partner, you can see the standard address and connection object address.
Is there any function module which can enable me to change the connection object address.

Product in a card of the business partner (transaction BP)

Similar Messages

Maybe you are looking for