PRODUCT KEY NUMBERS NOT ACCEPTED ON INSTALL ELEMENTS 13

Purchased Adobephotoshop elements 13 premiere, from Amazon direct, not a sub seller, tried the number on the sticker attached to disc sleeve,8 digits ? tried all the numbers on back of case still no good, say's in the instruction book key should start with 1057, there is no numbers starting with this on mine, please help need this working asap thanks.

Matthewb66143624 I am showing that you have updated case 0214738832 with the proof of purchase.
You mentioned that you are purchasing through Amazon. Have you been in contact with the seller? If you are getting more than one package from them without a serial code then they should certainly be notified.
I would recommend purchasing Photoshop or Premiere Elements 13 from Adobe directly or an authorized reseller. You can find a list of Adobe Resellers at Find an Adobe reseller.

Similar Messages

Have Windows OEM Product Key -but key is not accepted when Installing New Windows 8.1 Disk

I was able to secure the Product Key for what I thought was a Windows 8.1 OS on my Toshiba notebook. I believe my notebook ORIGINALLY had an OEM version of 8.0 (was pre-loaded when I bought the notebook) but at some point I updated the OS to 8.1. I
was able to verify that I was currently using 8.1 via the Bios set-up utility. After securing the product key, I contacted Microsoft and they agreed to send me 32 and 64 bit versions of Window 8.1 free of charge (so as long as I covered the shipping.)
When I went to install the 8.1 disk, I received a message stating that the product key didn't work. I can't help but wonder IF perhaps because my PC originally came with 8.0 that it's product key won't work with 8.1? When Microsoft asked
WHICH version I had on my PC, I had advised that I was using 8.1. They never asked what was the ORIGINAL OS?
Any ideas?

thanks for replies. I suppose it would be helpful for me to explain why I needed the product key and the new Microsoft Windows 8.1 discs in the first place. This was never a matter of merely trying to activate the OS. Last week- my
notebook went in to standby mode- a very normal process when I would step away from the notebook for a decent amount of time. When I tried touched the power button to release it from stand by, I received a message that the OS was not able to start up
due to TWO (very specific) files that were either missing or had been corrupted. The message recommended re-installing the OS in order to re-insalll or otherwise correct the file errors. I spent a good 3-4 hours researching this on a number of
Microsoft/ IT sites, and it appeared this was a very common error -stemming from "boot disk error" -or "errors with hard drive/ partitions". I then began my trek to a) locate the product key (of which I was able to secure from the BIOS) and b) have Microsoft
send me the Windows 8.1 discs. Hope this helps and thanks again.

Tecra S1 - XP product key is not accepted

Dear All,
I have a Tecra S1 where the original hard disc has completely crashed. I put in this laptop a new hard disc and would like to instal windows again. Unfortunately I do not have the original windows CD that should be delivered with this laptop. Till now I have tried 3 setup CD's but all these CD's do not recognise the product key on the bottom of my laptop.
Does anyone know how to get a correct installation CD?
Does anyone know what to change to get the CD's I have here to accept the key on the bottom of my computer?
In advance thank you very much for your help
Martijn

Hi Martijn,
I think you mean the product key on bottom side of the notebook, right?
Well, this key doesnt work with normal Microsoft disks because its an OEM license key and belongs to preinstalled Windows version.
If you install Windows from a normal Microsoft disk you have to use the key that belongs to this disk!!!
You can also install Windows from Toshiba recovery disk but if you dont have such a disk ask your local service provider for that.

I have product key numbers for my PS and Premier Elements 12

I have product key numbers for my PS and Premier Elements 12.
I installed on one computer 8 months ago.
I now want to initiate my 2nd download onto another computer.
I cannot locate the appropriate download instructions.
Any help out there?
Thanks,
Ellis

Download and Installation Help -
https://helpx.adobe.com/download-install.html
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
Adobe - Download free trial version Adobe Premiere Elements 12 | Adobe

New install of SQL 2014 Std MSDN. Get "The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging."

Trying to install a new version of SQL 2014 Std 64 or x86. Installing on Windows 8.1Pro 64bit machine.
I get:
"TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017."
I looked at the summary log and that is the only error.
I made sure there were no other instances of SQL on this machine. Uninstalled all VS2013 and sql instances just in case. IF there is somewhere to check if a previous version or license is causing the issue, i would be glad to check.
Any help would be appreciated.

Hi,
Please read this thread with similar issue
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bdd94577-515c-49fa-be44-008eacece057/installing-sql-server-2012-on-a-new-vm-error-code-0x858c0017?forum=sqlsetupandupgrade
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

T510 - No label with product key numbers for Windows 7

I just noticed that my T510 does not have the Product key numbers for the installed OS (Windows 7 64-bit), which I find quite strange. My previous three T machines, both from IBM and Lenovo, all have those labels n the back.
What is going on and what are the possible implications?
Thanks for any enlightenment on this issue.
Lin Yu
Solved!
Go to Solution.

Hello mate,
Remove the battery it's under it.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

Getting "The product key is not valid. INS00140" error during Crystal Report 2013 installation

We are getting “The product key is not valid. INS00140” error during Crystal Report 2013 installation. We are trying to install crystal report on Windows 7 64 bit OS.
Can anyone help?

What is CrystalReportsJava-2013? Where did this come from - download link? CD?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

I am getting error "Office for Mac has determined that your product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error

i am getting error "Office for Mac has determined that your product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error and was working perfectly fine with my sheet.

Could be some Disk Corruption, but...
http://support.microsoft.com/kb/969064

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

Hi, I'm helping StringSinger2 with this problem.
The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
SO...
When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
Many Thanks!

PE 9 will not load after installing Elements 10

Installed Elements 10 on Vista 64-bit. Did not uninstall Elements 9. Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk. There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2. Tried disk 2 of 3 from package, nothing happens.

Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
From: Steve Grisetti
Sent: Monday, January 02, 2012 7:09 PM
To: cptiger
Subject: PE 9 will not load after installing Elements 10
Re: PE 9 will not load after installing Elements 10
created by Steve Grisetti in Premiere Elements - View the full discussion

My product key is not valid

my product key is not valid

double check that you're using the correct serial no. : http://helpx.adobe.com/x-productkb/global/find-serial-number.html
if you are certain you are, you may need to contact adobe support: http://www.adobe.com/support/chat/ivrchat.html
but first go through these steps, http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html

From product box- will not accept serial number for Adobe Pro XI

From product box- will not accept serial number for Adobe Pro XI

Moving discussion to Acrobat Installation & Update Issues forum.

Visio professional 2013 cant install because office product key does not match

Settings: office 2007 on windows 7
I'm the IT manager for a small consulting company. We use the full microsoft stack - all paid for.
When one of the consultants needed visio we went along and bought an digital version of it.
We installed it and all was nice and dandy.
The consultant left the company, we decommissioned the visio product from his laptop which was then recomissioned to a new employee without the visio.
Another consultant is now in need of visio. When trying to install visio according to the instructions we are asked to activate the office account on this specific laptop.
We then get a message that this office Product key is activated through another Microsoft account please log out and log in with that account?
We are using the exact same procedure as when installing the visio the first time (the visio sw is not installed or used on any other machine).
We have a multi license (volume) windows and office agreement with product keys.
AND WE ARE STUCK - SPENDING MORE TIME ON THIS THAN IT WOULD ACTUALLY COST US TO BUY ANOTHER Visio license!
I've used Microsoft / windows / office throughout my career but this just is not professional!
Please help – To me this is not a support issue that I should spend support money on. We have purchased all products and we cannot get it to work.

Hi,
From your description, you had a digital version of Visio professional 2013, it was a retail version. Please give me the whole error message when you
activate Visio.
As far as I know, we need to uninstall Visio professional 2013 online( keep connection with internet),then we could re-install and activate it. If you uninstall
it from consultant' laptop offline, it'll store the product key in the laptop.
I recommend you activate a Microsoft product by using Microsoft Product Activation Center
http://support.microsoft.com/kb/950929/en-us
Regards,
George Zhao
TechNet Community Support

I installed windows 7, I restarted my computer with the install disk still in and it made me reinstall but my product key would not work anymore.

So I had installed windows 7, but I didn't know how to go back to the os-x so I just turned my computer off then back on but it stayed on windows but asked me to install. I'm guessing it was because the install cd was still in the disk drive. So when i started the installation process again I got to the point where I had to type in my product key but because I had already used it my product key was unavailable. So I'm wondering if there's a way to get my product key to work again. I called microsoft tech support and they told me that I had to talk to someone at apple and I'd like to at all costs avoid paying 50$ to be told to call microsoft.

you didn't read the manual or even look or understand the default keyboard assignments
x = Mac OS X
Option key = boot manager
Apple drivers in Windows includes one just like in OS X System Preferences to handle OS Switcher control panel part of "boot camp" control panel (over used term that tends to mislead and confuse)
http://support.apple.com/kb/HT1533

PRODUCT KEY NUMBERS NOT ACCEPTED ON INSTALL ELEMENTS 13

Similar Messages

Maybe you are looking for