Product Modelling Enivronment  - Variant Configruation

Hi Experts,
Can any one please let me know how to use PME for Variant configuration in CRM. If possible can any one please give me document or link related to PME.
Thanks in advance,
Regards
Vinod

hi vinod,
Refer the following help documents
http://help.sap.com/saphelp_crm50/helpdata/en/42/b62b98786e3119e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/e4/f7be59035c8a4b951d3e400955c97f/frameset.htm
Thanks and Regards
shanto aloor

Similar Messages

  • Product Modelling Environment - Variant Configuration- modelling configura

    Hello all,
    I have a very important question for which I am trying to find answers. I ahve been researching for the last 2 days continuously
    and now I kind of confused.
    I need an answer tot his at the earliest possible
    And I am struggling to differentiate between PME and product modelling in crm , is it the same?
    When Ilook in this link ,it says;
    http://help.sap.com/saphelp_crm70/helpdata/en/ed/bfb2ce6a6a46af92172c4ff901f125/frameset.htm
    NOTE
    This function in the WebClient user interface (UI) replaces the Product Modeling Environment (PME) application, which had to be installed separately.
    What does this mean?? does this mean that modelling configurable products is different from PME?
    can Product modelling be done in crm as well as ERP?
    Could u please let me know
    Thank you
    BR
    Riya

    Hi Vinod,
    Please find below a brief:-
    A product model contains the configuration model data relevant for one product which is a server based Architecture.
    -A knowledge base is a container for data and can contain many PMEs
    -PME is available in Product page
    -Need to insert and create a new product model and select the model and enter product related data.
    -Create KB's
    -Will have to define the characterstics and values and assign to class
    -Product model hierarchy shows the model in tree structure.
    -After you created the hierarchy with all details you can simulate the configuration as a result titile simulator pops up where you can see the status and Variants and your current selection.
    Regds...
    Arup

  • Product Modelling Environment - Variant Configuration

    Hi Experts,
    Can any one please let me know how to use PME for Variant configuration in CRM. If possible can any one please give me  document or link related to PME.
    Thanks in advance,
    Regards
    Vinod

    Hi Vinod,
    Please find below a brief:-
    A product model contains the configuration model data relevant for one product which is a server based Architecture.
    -A knowledge base is a container for data and can contain many PMEs
    -PME is available in Product page
    -Need to insert and create a new product model and select the model and enter product related data.
    -Create KB's
    -Will have to define the characterstics and values and assign to class
    -Product model hierarchy shows the model in tree structure.
    -After you created the hierarchy with all details you can simulate the configuration as a result titile simulator pops up where you can see the status and Variants and your current selection.
    Regds...
    Arup

  • Create a production order with variant configurator data

    Hello,
    Can anyone tell me the way to create a production order with variant configurator data. Is there a BAPI ? an IDOC ?
    Is there several steps ?
    I have to create an interface which creates automatically PP orders. The data input is a file.
    Thanks for your help

    Hi,
    There are fews BAPI's available for creation of Production Order. They are:
    BAPI_PRODORD_CREATE
    This bapi will suit to your requirement, as input will be provided from file.
    Others are
    BAPI_PRODORD_CREATE_FROM_PLORD " this converts planned order to production order
    BAPI_PRODORD_CREATE_FROM_REF      " this creats production order considering other production order as reference.
    Hope your query is answered.
    Regards,
    Brajvir

  • Cookbook Creating Product Models

    Hi all,
    I am trying to create product models for SAP CRM 5.0 using PME 4.0. I tried to look for information about product models and came across with the following <a href="http://help.sap.com/saphelp_crm50/helpdata/en/e4/f7be59035c8a4b951d3e400955c97f/frameset.htm">URL</a>. I tried to follow this guide but I am having trouble setting up domains.
    I was wondering if there is a cookbook with examples available that could help me setup product models which I can use for the configurable products.
    Kind regards,
    Huseyin Kara
    System Programmer
    [email protected]
    Message was edited by:
            Huseyin Kara

    I have the same problem as Huseyin.
    Is there someone who knows more about the subject?
    Kinds regards,
    Robbert de Zwaan

  • Bapi for Assign a Location Product - Model in SCM 4.1.

    Hi,
    I need a BAPI / FM to Assign a Location Product - Model in SCM 4.1. Can any body give me the info regarding this.
    Thanks in advance for your help.
    Saisdhar

    Hi,
    please have a look at note 865361. Please use Userexit CIFPPM01.
    In the note you'll find a sample coding for the locations.
    regards
    Joerg

  • Product modelling environment(PME)

    Gurus,
    Can someone explain about Product modelling environment.Your inputs will be of great help.
    Thanks
    Andy

    Have you checked this <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/78/ad4540d1b79523e10000000a1550b0/content.htm">SAP Help</a>?
    ~Suresh

  • Let's ask HP to categorize support forum for every product model or at least every model series

    Hi all HP fans!
    I really wonder why not HP Support Forum is not categorized by every product model or at least model series to help customers post issues in apropriate group and helpers don't get confused in thousands of unrelated questions.
     Regards
    AlizzA

    Because they don't care...
    I've been a service tech for 18 years repairing HP products, from Laserjets to Designjets and I used their technical support web site and phone support for help when I was stuck.
    In the early years Tech Support was great! They were a knowledgeable and helpful team of bright people.
    This was when HP had direction and vision.
    They cared about the customer, the customer's satisfaction and the companies image.
    Not any more.
    Just look at the piles and piles of ticked off people ranting about HP's Customer Support...it's shameful!
    HP pumps out new products faster than ever, dropping support for relatively new products and leaving customers and 3rd party support providers out in the cold.
    They put up self-help websites like this one to make themselves feel better.
    We've moved on to Canon products and let me tell you...we've never looked back!
    Customer and tech support are second to none as well as the products!
    Message Edited by MudSlinger7 on 11-02-2009 05:24 PM

  • Accessing the Product Model in PME

    Hi All,
    I am facing an issue related to PME, I have created a configurable product in CRM. The  issue is when i  clicked on create button in the configuration tab of commpr01 , PME starts and establishes connection with the respective client but it is not showing me the model name and the configurable product which i already  made nor i am able to see the other categories and product type.
    Can any body help me out.
    Full points will be rewarded.
    Thanks and Regards,
    Shweta
    Edited by: Shweta gupta on Feb 18, 2008 11:24 AM

    Hi Muralidhar,
    I think that note is not applicable for me, because it is giving corrections for some UAMO tcode which is not applicable for me. I am specifically facing problem when creating a new model from PME. It is not displaying me my model name nor enabling options to add product.
    Please suggest something useful.
    Regards,
    Shweta

  • U510: No WiDi, and Veriface on US production models??

    Lenovo - what is going on? You are selling products that either don't work properly (see the touchpad or WiFi threads), or aren't being delivered as promised (see the missing software and Widi threads).
    I just got through reading the software threads and decided to take a look at my U510. According to the tech specs here, the U510 comes with Windows 8 x64, WiDi, and Veriface - none of which are present on US models of the U510 (except the Win 8, that is). In fact, the only Intel apps on my system are the driver utilites for the WiFi and HD4000, and the Intel AppUp application which appears to be nothing more than another app store.
    I've decided - you can have this thing back, and the new one you're shipping me. I want nothing to do with the "new" Lenovo - your support has gone the way of Dell. Such a sad end to the IBM Thinkpads - they were once the best money could buy.
    Moderator Note: Edited subject to match content.

    While browsing through the dirvers area of the site yesterday looking to see if there were any updates, I discovered the Intel WiDi driver and the Intel Chipset driver - neither of which were installed by default.
    Installation of the WiDi went smoothly, and appears to work, but I have not tested it yet since I don't have a WiDi receiver yet.
    While installing the Intel Chipset driver package, the window reported that Intel Identity Protection had been installed. I'm still looking to see where it stuck it, and see what it can do for me. I'm going to try and find the W7 Veriface package for the Y or Z series and see if it will work on the U510 with W8 and the Intel Identity Protection loaded.

  • Production Order for variant subassemblies

    Hi all,
    I have a scenerio were there is header material called A. It has sub-assemblies C,D,E. Each subassemblies have lot of variations. So the User does not want to create individual Material Master for these variations.
    But the user wants to book the hours spend for these sub-assemblies individually for these variations.How to address this scenerio is SAP.
    With Regards,
    Afzal

    Hi Afzal,
    You have to go for variant configuration for the materials C, D, and E. 
    If the scenario demands for MTS then you have to define a new materail type
    like "STOCKABLE CONFIGURABLE MATERIAL"
    Regards
    Krishna

  • Quality on latest production models??

    Is there any concensus as to the whine and / or build quality on the latest production runs for the MB???
    Thanks

    I hope I am not typical, but I'm on my third 1.83 MacBook. I've returned two week 29 machines, the first one had blemishes on the screen, out of the box. The second (also week 29) had a mushy trackpad button and an apple key that would get stuck down. The third is a week 30. It runs much hotter than the last one and the page down key doesn't work unless you press just so. I've also had kernel panics, something I've not had before. I'm still on the fence on taking this one back, but if I do I may just return it. It is for my wife (I'm waiting for MY MacBook to come back from repair) and she doesn't need the hassle.
    MacBook 2GHz   Mac OS X (10.4.7)   Mac mini (G4)/iBook G3

  • Cross Product modelling question

    Hello
    I have two ODSs whose structure is as mentioned below.
    ODS-1
    A(Key)     B(Key)     C(Key)
    01               01            X1
    01               01            X2
    ODS-2
    A(Key)     B(Key)     D(Key)
    01                  01        Y1
    01                  01        Y2
    C & D column values will be multiple in their respective ODS2 and there is no relation ship between them.
    My report requirement is as shown below. X2& Y2 values are under C & D columns.
    A     B     C     D
    01             01            X1           Y1
                                    X2           Y2
    If I creaet a infoset on above two ODSs by joining fields AB. I am getting result as shown below. X1&X2 are under C and Y1,Y2 are under D column.
    A     B     C     D
    01             01             X1          Y1
                                                   Y2
                                      X2          Y1
                                                    Y2
    I will be glad, if you can guide me to resolve this.
    Regards
    MB

    Hi Madhukar,
    instead of creating infoset on the 2 ods, can we create an info cube above these 2 ods's.
    we can have A, B, C, D as the char in the cube.
    so we will get each record in the cube as unique combination of A,B,C & D.
    so now we will get the records as:
    01 01 X1 Y1
    01 01 X1 Y2
    01 01 X2 Y1
    01 01 X2 Y2
    in this case i guess you dont need the 2nd & 3rd records.
    pls check whether it is ok for u....else we need to try other option.
    hop dis helps.
    Mugdha.

  • Return product id when all variant active flags = 'N'

    Hi,
    I have a product table and a product_variant table. active_flag exists on product_variant table, with values 'N', 'Y'.
    How can I get products with all variants active_flag = 'N'? each product has multiple entries in variant table.
    Thanks,

    Hi,
    Well, your original post made me (and others) assume you'd also be querying your product table.
    Given your testcase, you could also use DISTINCT.
    MHO%xe> select * from pv;
    PRODUCT_ID PRODUCT_VARIANT_ID INVENTORY_LEVEL A
             1                  1              20 Y
             1                  2              20 N
             2                  3              20 N
             2                  4              20 N
             3                  5              20 Y
             3                  6              20 Y
    6 rijen zijn geselecteerd.
    Verstreken: 00:00:00.01
    MHO%xe> select distinct product_id from pv where active_flag = 'N' order by product_id;
    PRODUCT_ID
             1
             2

  • CRM 7.0: set up IPC product configuration

    Dear experts,
    we set up a CRM 7.0 with ERP 6.0 backend integration. In the ERP we apply ERP variant configuration (Materials). Quite simple: some configurable materials (material type KMAT) with a few characteristics and product variants of them (material type FERT) which are maintained in order processing. Variant conditions are maintained and automatically determined for product items. Now we need this in CRM for opportunity processing.
    Therefore we have created Knowledge Base and Runtime Version for the configurable products in ERP and downloaded test materials (one KMAT and one FERT (product variant) into CRM (download objects MATERIAL and SCE). In CRM product master data maintenance for the KMATconfigurable tab with the configuration profile is displayed. Afterwards we downloaded condition master data into CRM, among others variant condition VA00 with condition table A057. Everything looks fine.
    In CRM we want to set up opportunity management. In the opprotunity transaction processing pricing is working already besides the determination of variant pricing. As we intend to maintain only FERT materials (product variants)we do not need interactive product configuration in CRM sales order or product simulation in CRM product master data. We only want the variant prices to be determined automatically for the product variants (FERT) in opportunity processing. That is why we are not sure if it necessary to set IPC configuration settings (XCM etc.). This is my first question. Nevertheless we started to maintain settings for product configuration in order to find out if this is solves our problem:
    1.) XCM configuration (IPC): we set up a customer application for "crmproductsimulation" and defined customer components jco (RFC test worked) and productvariants and restarted J2EE Instance in TX: SMICM
    2.) We set up product configuration customizing:
    table: COMM_IPC_PROP:  caller; crmproductsimulation; scenario.xcm; ZCRMproductssimulation
    table: COMM_IPC_URL: UI_CFG; http://<host>:<port>100/ipc/ipc/command.do
    When starting simulation of product model for configurable product in TX: COMMPR01 I get following error message: "HTTP500: ISA Framework: The [XCM application configuration]='ZCRMproductssimulation' does not exist. Check XCM configuration.
    Details:   No details available". This application is maintained in XCM so I assume something else is missing.
    To sum up my questions:
    1.) Is it necessary to set up IPC product configuration as described above when we only want to maintain FERT products which are product variants and determine corresponding variant prices (VA00). No interactive product configuration is necessary.
    2.) If it is necessary to set up IPC product configuration to active product configuration (to see product variants in product master data maintenance and opportunity processing and corresponding variant condition data), what did I do wrong?
    Thank you very much for your help.
    KInd regards,
    Mark

    Hi Arup,
    thank you very much for your reply.
    Concerning XCM / CRM customizing I have done the steps you recommended:
    1. XCM:  I created customer applications for crmordermaintain and crmproductsimulation and maintained customer component JCO for both of them (Assigned JCO User has SAPALL / SAPNEW, test run was successful) Active and default are ticked. Are there any further steps missing.May be in General Application Settings > Customer > ipcwebappconfig - I changed nothing there (SSLenabled: true)
    2. In CRM customizing I maintained tables as follows:
    COMM_IPC_PROP:
    caller   crmordermaintain  scenario.xcm   Zcrmordermaintain  (name of customer xcm app -case sensitive)
    caller   crmproductsimulation  scenario.xcm  Zcrmproductsimulation (name of customer xcm app -case sensitive)
    COMM_IPC_URL:
    Destination: UI_CFG ;Appl.  <blank>; URL: http://<host>:<J2EEport/ipc/ipc/command.do
    Calling the IPC product configuration e.g. from the CRM product master (simulate model), I get the already mentioned HTTP error:"ISA Framework: The [XCM application configuration]='Zcrmproductsimulation' does not exist. Check XCM configuration.".
    That's why I am thinking that something is missing concerning the communication between CRM application and IPC,because XCM applications do definitely exist.
    Is the URL correct .../ipc/ipc/commando.do which I maintained in table COMM_IPC_URL?
    Is it possible to check if communication between CRM Online and Java does work respectively what  do you exactly mean by "IPC URL must be available for UI_CFG"? UI_CFG ist a RFC-connection which has to be maintained additionaly and if so what has to be maintained exactly?
    You mentioned a RFC_USER (This is the JCO-User I suppose?)and J2ee user. Is the J2ee user just the admin user of the J2EE engine or do you mean something different?
    Thanks in advance for your further help.
    Best regards,
    Mark
    Edited by: Mark Willhoeft on Jun 4, 2010 8:36 PM
    Just one further thing: After changing XCM config I restarted J2EE by TX SMICM (Administration - J2EE Instance local - Send soft shutdown - with restart). Is this enough to restart J2EE and activate changed XCM settings or has the restart to be handled different?

Maybe you are looking for