Product number CQ183A can not access setting in EWS keeps asking for admin login and password.
HP Photosmart 5510d B11H
CQ183A
Windows 7, Vista, and Linux
I installed the printer everything works until I try to access certain settings in the Embedded Web Server. I pops up a box asking for admin login. Initially, the status page claimed the Admin password was set even though I never set that up. Through chatting with tech support rests cleared this, it is now reporting Not Set. However, I still can not login to check/change settings etc.
I think this printer had been purchased then returned to the store because the manual was missing. I downloaded the manual and did not find any mention of how to access the password settings. So far tech support has not been able to answer my question,
Is there a default?
How do I access the EWS settings -> security to setup a password?
Hello MREnder,
From what I am reading, you may need to call in to get a factory reset done. These resets can only be done over the phone. You can find the number at eprintcenter.com under the support section.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Similar Messages
-
Ever since I updated to Yosemite my mac book pro keeps asking for Apple Id and password but will not accept them. What can I do?
Try the advice here. I had the same problem and it worked for me.
You have to delete the "SC Info" folder from /Users/Shared. You will have to use Terminal to enable you to see this folder first. Make sure iTunes is not running when you delete the "SC Info" folder
There is an article from Apple on this here. The "SC Info" folder contains iTunes authorization information.
I did this two weeks ago and iTunes accepted by login. I haven't been asked for my AppleID or password since. -
IPhone 5 keeping asking for Apple ID and password and not able to download apps
iPhone 5 keeping asking for Apple ID and password and not able to download apps
I have the same problem and when I enter my pass word the phone goes to close and the little apple comes up then I have to start all over again and it keeps doing it.
-
admin status changed to standard,currently no admin,what to do!?
Please take these steps to restore administrator privileges to your account. This somewhat tedious procedure is only necessary if you've confirmed that no administrator account exists on the system.
If you don't already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need guidance. You won't need the backup unless something goes wrong—which is always possible.
Step 1
Start up in Recovery mode. The OS X Utilities screen will appear.
Step 2
Take this step only if you use FileVault 2. Launch Disk Utility, then select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
Step 3
Select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your startup volume if not already selected. Pull down the menu labeled
Select the user account
and select
System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9. I suggest you write down the password. If you don't write it down and forget it, you'll have to start over from Step 1.
Select
▹ Restart...
from the menu bar.
Step 4
This step, like Step 2, applies only if you use FileVault. Log in as usual, then select
▹ Log Out...
from the menu bar, or press the key combination shift-command-Q. Don't restart. You'll be returned to the login screen.
Step 5
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 3 in the Password field. You should now be logged in as root. This is a potentially dangerous condition. Do nothing while logged in as root except as indicated below. You'll be fine as long as you don't deviate from the plan.
Open the Users & Groups preference pane. Select your usual administrator account in the list of users and check the box marked
Allow user to administer this computer
You'll be prompted to restart. Do that and log in as yourself—not as root. Your administrator status should now be restored.
Step 6 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user." You must authenticate in Directory Utility as "root" with the password you set in Step 3. Authenticating as another administrator won't work.
Credit for this idea to ASC member wessongroup. -
Can not access a website but everyone else is doing well and the old computer with the same internet coming in on that side. side is www.miun.se
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again. -
I just upgraded to Lion. I was trying to set up iCloud and it asked for my "login" keychain password. I've never been asked for the keychain password before. I've tried every password I can think of and nothing works. I'm normally asked for the password to my machine when upgrading software, signing on, etc. but this is different apparently. I tried the same password and it didn't work either. I read a couple of posts and they all want to take me through Applications/Utilities but that requires knowing your password in order to change it. I don't know it. Don't remember ever setting up a keychain password. Does anyone know how to change the keychain password if you don't know the keychain password???
Most of the time your Keychain password is the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered. -
I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere
It's evident that you are using Snow Leopard or earlier (or very early Lion) since you have the now obsolete MobileMe preference pane.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further. -
Aperture keeps asking for my name and serial number
Aperture keeps asking for my name and serial number, but only on one of my Macs. This is a new Mac that I restored from my old Mac. It made sense to have to put in the documentation the first time, but the program keeps asking for it. Any thoughts?
Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise the serial number cannot be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library; this requires read/write access for administrators. Do you enter your serial number using an administrator account?
SInce you migrated your system from another mac, you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppsSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see ProAppsSystemID there, move it to its proper location in /Library/Application Support/ProApps.
Aperture must be running, and you will have to wait a few minutes to be seeing the file appearing the /tmp directory.
Regards
Léonie -
When I try to install flash player on my Mac, I get to the panel that asks for my name and password, but it will not take my password. Tried changing the password, but same result. Suggestions??
This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person. -
Received a email from Apple stating that my Apple ID was used for a purchase not on my device. It had a link to cancel purchase but asked for my email and password which I gave then it wanted my credit card info! I didn't give that,what should I do? Do you think this is just a way to get my credit card information?
It sounds like a phishing email. You can't "cancel" purchases. You've now given them your AppleID and password, so you should immediately change your password to something new and very secure.
Also watch out for suspicicious activity on your account. -
A meeting is established, and when ionternal users use their IP phone to attend the audio conference call, some are asked for their IDs and passwords and some are asked to enter the meeting ID directly.
Why is it like that? We need all the users to be able to enter the meeting ID directly without needing to verify themselves, thanks.Agree with hirantha.
Can you call from internal desktop client to external desktop client?
Please check that first.
If not, check the required port requirement for Lync Edge Server:
http://technet.microsoft.com/en-us/library/gg398798.aspx
Lisa Zheng
TechNet Community Support -
Can't use ipad because it keeps asking for gmail password
Can't use ipad because it keeps asking for gmail password
Are you trying to access email on your gmail.com account?
Or are you trying to open the iPad and need the Passcode?
Give more info about what you are trying to do.
Cheers, Tom -
I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.
Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then. -
hi, I bought a second hand iphone 4s and seller has blocked it and reset it know the iphone is asking for a email and password that the seller was using, I can't contact him know and i'm left with an Iphone that is useless, can you help ma please?
Sorry, there is nothing you can do until the device is removed from the sellers Apple ID.
Without that, your device can't be used, check these articles:
iCloud: Find My iPhone Activation Lock in iOS 7
Find My iPhone Activation Lock: Removing a device from a previous owner’s account -
ExportPDF - I can't download my converted document. When I try to download, It asks for my id and password and when supply it asks for it again and again... What am I doing wrong?
Hi jow75,
I'm sorry to hear that you're having trouble downloading your files. Please try the following:
Clear the browser cache and try again.
Try a different browser (see System requirements | Acrobat.com for a list of supported browsers).
Make sure that you're using the correct Adobe ID and password.
Please let us know how it goes.
Best,
Sara
Maybe you are looking for
-
I want to set up an iPod for my dad... (Multiple Libraries Question)
My dad has a early Shuffle (back when HP made 'em), and has grown tired of no screen and all. Being technologically deficient as he is, I was going to give him my old iPod Video for Father's Day (since I'm getting the iPhone, hopefully), and have it
-
HP 2000-2d19WM Notebook Windows 7 64-bit Drivers
My friend recently gave me her laptop and told me it was very slow and was having several problems. I took a look at it and it's riddled with malware and adware. After discussing it with her, she said she'd like if I could install Windows 7 on it for
-
File by File picking with Standard File Adapter with NFS Protocal !!
Hi Folks, How to pick file by file with little gap in a file directory by Standard File Adapter. One interface, one communication channle. Ex: XML_XXXXX_XXXX1.xml XML_XXXXX_XXXX2.xml XML_XXXXX_XXXX3.xml First I need to pick one file XM_XX
-
Hi, I was trying to implement jUDDI on weblogic. I have set up all the prerequisites, i have set up the db also. I am trying to deploy the application as an ear file which contains jUDDI war file, pluto portal war file, UDDI portlet war file. Everyth
-
Missing uniSyncL.wav and uniSyncL.wav EXS24 "Spectrum Stack 07.exs"
"Spectrum Stack 07.exs" Missing uniSyncL.wav and uniSyncH.wav EXS24. I try to reinstall everything two times, but still there missing. Can any one mail theme to me [email protected]