Product Ownership Assesssment Survey: Have your say

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Similar Messages

Product Ownership Assessment Survey - Have your say!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

@ Onepamopa - thank you for voicing out. I really thought I was one unlucky customer and one of a few to experience such inconvenience and distress over a product and design that Lenovo took pride in. I too have spent 1 month trying to solve the problems with a brand new Lenovo Yoga Pro 3. I am now using laptop number four of the same model in 1 month, a proof of my blind faith in this product and increasing disillusionment....and deludedness... I was already advised by friends and colleagues, after laptop 1 that I should perhaps change brands... Objectively speaking, the after sales service i.e. technical and service support were very helpful, however, when purchasing a brand new product you wouldn't think you'd have problems already from hour 1. Front line and customer service attitude were less than professional and frankly quite rude. I was lucky that I'd purchased through a retailer...otherwise my brand new laptop would be out of the shop and sent straight to repair. @ Limpaar - also thank you for sharing your point. I thought it was great when this assessment came out (though also somewhat ironic)... that there was a channel where I could communicate with Lenovo...where customers' views would be valued and heard... I then was filtered out on the second page and that was the end of that... Is there a Lenovo representative online? I'm not one to cry online without first assessing and taking alternative steps to solve the problem...I have been co-operating and I'd say pretty patient... Lenovo.... where are you?... Those that do...

Product User Assessment Survey: Have your say!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Product Owner Assessment Survey - Have your say!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Have your say on Cloud

The team are building better software to help you manage print in any hosted environment. Take our quick survey for your chance to have a say on Cloud. surveymonkey.com/s/XXH9YLM

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Product Ownership Assessment Survey

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

@ Onepamopa - thank you for voicing out. I really thought I was one unlucky customer and one of a few to experience such inconvenience and distress over a product and design that Lenovo took pride in. I too have spent 1 month trying to solve the problems with a brand new Lenovo Yoga Pro 3. I am now using laptop number four of the same model in 1 month, a proof of my blind faith in this product and increasing disillusionment....and deludedness... I was already advised by friends and colleagues, after laptop 1 that I should perhaps change brands... Objectively speaking, the after sales service i.e. technical and service support were very helpful, however, when purchasing a brand new product you wouldn't think you'd have problems already from hour 1. Front line and customer service attitude were less than professional and frankly quite rude. I was lucky that I'd purchased through a retailer...otherwise my brand new laptop would be out of the shop and sent straight to repair. @ Limpaar - also thank you for sharing your point. I thought it was great when this assessment came out (though also somewhat ironic)... that there was a channel where I could communicate with Lenovo...where customers' views would be valued and heard... I then was filtered out on the second page and that was the end of that... Is there a Lenovo representative online? I'm not one to cry online without first assessing and taking alternative steps to solve the problem...I have been co-operating and I'd say pretty patient... Lenovo.... where are you?... Those that do...

Have your say on Oracle ADF

I've published a survey to gather information on how we can best help you become successful with Oracle ADF. Please take a few minutes to complete the survey. Details can be found on my blog
http://blogs.oracle.com/grantronald/entry/your_chance_to_change_the
Regards
Grant
p.s. feedback is that the survey works better with FireFox.

Bump

I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight.

I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product.

Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
* tax not included.

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

When trying to use find my Iphone says off line , suggestion is to switch on and off airplane mode , so are you saying when you have your phone nicked you should leave a note for the thief to do this so we can trace him?

when trying to use find my Iphone says off line , suggestion is to switch on and off airplane mode , so are you saying when you have your phone nicked you should leave a note for the thief to do this so we can trace him?

Ivorbiggin wrote:
so are you saying when you have your phone nicked you should leave a note for the thief to do this so we can trace him?
Yes.

HT1366 I thought my product was already registered with your service. My laptop was stolen, how else may I provide my serial number if I do not have my computer any longer.

I thought my product was already registered with your service. My laptop was stolen, how else may I provide my serial number if I do not have my computer any longer.

If you registered it in https://supportprofile.apple.com/ you can log in there with your Apple ID and find its serial number.

Bonjour64 error: "The configuration data for this product is corrupt. Contact your support personnel."

Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5). I get the error: "The configuration data for this product is corrupt. Contact your support personnel." Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc. Not worthwhile to reinstal Windows 7. What do I do?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

First of all, I would have to say that getting in touch with you is a nightmare and I am not at all happy that I can't just email or live chat with someone who can help! I am not a technical person, I just want to be able to use Photoshop Elements and ge

First of all, I would have to say that getting in touch with you is a nightmare and I am not at all happy that I can't just email or live chat with someone who can help! I am not a technical person, I just want to be able to use Photoshop Elements and get on with it. I bought Photoshop Elements via Amazon some months ago and it worked fine. I then got a message that advised that the trial version would expire, which it subsequently has (I have been trawling your site for weeks and weeks trying to find an email or phone contact to get some assistance). Relucltantly, I am now typing this - and I suspect it will not help in the slightest! I bought the FULL not TRIAL edition of Photoshop Elements and I have contacted Amazon who confirmed this, but say I need to contact you. Can you please let me know how I can resolve this? Louise A Fraser

Hi Louise, sorry to hear of your problems. This is not Adobe. We are mainly support volunteers, other users like you, trying to help one another. You need to contact Adobe directly for activation and licencing issues. Click the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on. Don’t let them pass the buck. Stay connected and ask to speak with a supervisor if necessary.
Click here to get help now Contact Customer Care

All I have to say is ... WOW! and THANKS!

So, I'm greatful to all of you who spend your time answering some of our dumb (and not so dumb) questions...
I'm new to FCP, and I've only had it for a few days. I've been working with Avid Express DV now for 2 weeks...and all I have to say about FCP, especially in the timeline...is....WOW!.
The editing (ability to lock my audio and shorten video tracks for multiple camera angle input) is just sooooo much easier than ADVX. I like AVID's tutorial better...the step by step process...but I bought an aftermarket FCP tutorial that is very good and helpful too.
I'm sure I'll be slamin this forum with questions...but man, I'm very impressed and it's only been a matter of hours.
THANKS experts for all your input...you make it happen for guys like me.
MW

I too started out a humble newcomer (Avid convert) and learned all I did about FCP from this forum, the Creative Cow, and LAFCPUG.
I too give many thanks...and the way I express my thanks is by helping others.
Shane

Product Ownership Assesssment Survey: Have your say

Similar Messages

Maybe you are looking for