Product recovery CD/DVDs for Satellite Pro 6100 ?

Hi,
I bought a Satellite Pro 6100 (model number: PS610E-029ZV-BE) second hand and have experienced a non recoverable crash.
I need to reinstall but as you can guess, I don't have the recovery CD/DVDs. Does anyone out there have them and could send/ftp a copy ?
I have tried with an official windows XP Pro CD, but the key which is on the little sticker on the laptop is not accepted...
Thanks in advance for your help
Bruno Mamer

Hi
How Nick said, you can buy the Recovery CD but if you want you can install the original Microsoft Windows OS and then all necessary Toshiba tools & drivers.
You can download the drivers from the Toshiba website:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Best regards

Similar Messages

No Model Number in Download Page for Satellite Pro 6100, model PS610C-NGYSPP

I am using Satellite Pro 6100,
model PS610C-NGYSPP
Serial No - 33127448P
The Problem is I want download the Drivers for my Laptop.
IN the download page (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU)
if i take Product series = Satellite Pro 61xx
and Model = Satellite Pro 6100
IN The short Model no, i only have PS610U or PS610E
and my model is PS610C,
can any give me exact Product series, model and short model to use for the good drivers?
Solved!
Go to Solution.

Hello Thaliehome,
Your model is a canadian unit.
Here is the link to your driver downloads for your model.
http://support.toshiba.ca/support/Download/ln_byModel.asp
Good luck.

DVD for Satellite Pro 4600 ?

I checked the forum and tech support for my satellite pro 4600. I remember in the past it was possible to upgrade the standard cdr with another (cdrw and/or dvd and/or dvdrw) Which dvd-rom must I look for to upgrade ?
Thanx !
Additional info:
toshiba satellite pro 4600
model no: ps460e-020s7-du
ser. no: 61282447G SS460-0
Barcode: I61282447GSS460-020s7DUK
specs: PIII-700/384(128)/20G(10G)/14T/C/LM/W
(between () is the original equipment)

Update:
Toshiba Satellite Pro 4600 has 2 controllers:
HD is Primary Master
Teac CD224e (cdrom) is Secondary Master (right?)
When I put in Nec ND6500a (which is obviously set to CS-Master) the bios says nothing attached to the Secondary Master (the 2-dary master-controller even disappears in bios/OS)
I noticed reading several fora (and this thread) the ND6500 can bet set to:
CS-Master
CS-Slave
Fixed Slave.
Obviously I need Fixed Master (or am i wrong?)
Is it possible or not to set the ND6500A to (secondary) Fixed Master or not ? Or should I return the drive ?
Anyone any suggestions on altenative drives ?
SD-R6572 ?
SD-R6472 ?
SD-C2612 ?
SD-R2412 ?
SD-C2302 ?
SBW242U QSI ?
Please help !
Finally: Please consider drives that are also capable of reading DVD +/- R(W) disks, like the Toshiba SD-C2732 (but if it works on my sp4600:i'm not sure)

Yamaha AC-XG lost sound for Satellite Pro 6100

It was working fine and I took my PC on a business trip for a week during which I didn't use the computer at all. When I returned home, it lost sound. Devise Status in Devise Manager says "This devise cannot start (Code 10)". My OS is Windows XP Pro Version 2002 SP3. I have uninstalled and reinstalled the driver. (Version 6.13.10.2152. I believe this is the driver for Windows XP SP1/SP2, but this is what I had before. I couldn't find the one for SP3.) Still no sound. About a month ago, I downloaded iTune as I started to use an iPod Touch. But even after this, it was working fine until recently. I would appreciate any suggestions.

Hi
Do you mean the BIOS password?
If yes, then youve got a problem because the BIOS password cannot be removed on the simply way.
As far as I know the special procedure is needed to remove the old BIOS password.
You have to contact the ASP in your country. The technician could help you.
Greetings

Need recovery DVD for Satellite C660-2FF

Hi,
i need a recovery DVD for Satellite C660-2FF. HDD crashed.
Win 7 product key is available.
Who can help? maybe .iso download?
thanks

Recovery image cannot be downloaded and if you need original recovery disc you can order it on https://backupmedia.toshiba.eu/landing.aspx

Satellite Pro 6100 - "Built-in HDD Password" error at startup

Hi, my laptop (Satellite Pro 6100 P4-M 1.7 GHz/15TFT/256MB/40GB/DVD-CDRW/LAN/WiFi/BT/W2K or XP) has rather recently started prompting me with a message "Built-in HDD Password" at boot up. I've never set any passwords on the hard disk in the past, though in desperation of trying to get the laptop running, have tried all the possible passwords that I've ever had. Nothing's working, and I am stranded with a dead laptop on my hands. I would appreciate any help/advice that anyone can render.
Thanks.

Hi Khurram,
Sadly I think you will need to replace your hard drive. If your notebook is definitely asking for a hard drive password then there is no way of bypassing this and the only way that I know of recovering this situation is to send the hard drive to a specialist company who specialise in this kind of recovery (usually for forensic puposes, Police, armed forces, etc.). This can prove quite expensive.
The easiest (and cheapest) option would be for you to replace the hard drive and then restore your system and data (either from a backup if you have one, or else from the Toshiba recovery discs).
regards,

Can't see new hard drive on my Satellite Pro 6100

I have bought a new Toshiba 40GB hard drive for my Satellite Pro 6100.
I have installed it in it's bay but it is not being recognised in the BIOS or when i try to reinstall using the recovery disc!
Would the bios recognise that there is a drive even if it is not formatted?
Am missing something?
Thanks in advance
Neil

It should work !
The drive also should be recognized even it is not formatted...
3 things you can do:
At boot up you can go into bootmenu and check if the drive is being recognized on the 1st controller.
If not check configuration of the drive (master/slave/cable select).
If this does not help check toshiba support website and download the latest bios (probably you already have it, check like mentioned above)
If this does not work your new drive (or worse: your controller) could be faulty. If the orignal drive still works on your laptop, check the 40gb drive in another laptop or PC with adapter to normal ATA-connection.

Is it possible to install Windows 7 on Satellite Pro 6100

Is it possible to install windows 7 on a Toshiba Satellite pro 6100 machine? I 'm currently using windows XP.
thanks.

Hi buddy,
Do you really think about Windows 7 installation on many years old Satellite Pro 6100???
In my opinion this will not work because its too old and not fast enough. Newest OS that is supported from Toshiba is Windows XP and this should be the best choice for this oldie.
So just be satisfied with Windows XP, its a good choice for older computers! :)

Satellite Pro 6100 shuts down after 15-30 minutes

My satellite Pro 6100 cuts out after 15-30 mins operating on mains power. There is a snapping sound and all lights go out except slow flashing amber (power problem). I restore it by removing the power cable and waiting a while.
It will then boot up again. I have used two different power adaptors and two different battery packs. It also happens if running on mains with no battery in. My suspicion is an overheat cut-out. Does the Sat Pro have one? Might it be clogged with dust inside (it is 5 years old)? If so how do I clean it out. I don't think it is fan failure as I can hear the fan cut in. Advice much appreciated. Thank you.

Hi there,
Me and my partner, have the same LapTop, and I've located the problem in connector between PSU board and MainBoard. So, if you've never opened your LapTop, now is the time, but be prepared with tools for SMD soldering. Usually, the connector on MainBoard is the problem. The reason for this is that Toshiba made flaw in design of the housing and admitted that, which resulted with court order for replacing the LapTop with some models from newer line for that time, or paying cash amount ($1.000). I intend to repair my LapTop in a way that I will replace the connectors (both on PSU and Main Board) with thin wires. I know that this is a hell of a job (160 solder points) but what can I do, I love this machine. I am working on Compaq EVO N-610c, but he can only eat the dust from Toshiba.
Regards,
Alek
P.S. If you want to consult me about that matter, feel free to contact me on my e-Mail: [email protected]

How to access WLAN card on Satellite Pro 6100?

I'm cleaning up a Satellite Pro 6100 for a customer and noticed that it has a built in wireless card (something they didn't know). However, I just can't work out how to access it. I've pushed the little switch on the side backwardsa and forwards, I've toggled Fn-F8 and everything else i can think of. But nothing happens.
I even discovered the Network Device Switch utility but that's only showing the LAN card.
Any ideas?

First of all please check in the device manager if the notebook has built-in WLan card. The available WLan switch at the notebook site says nothing. The notebooks are delivered with different specifications and the WLan card is optional.
I think the WLan card is not installed in your notebook and therefore you cannot use it.

Satellite Pro 6100 switch itself OFF

Hello,
I'm from Italy. It's 3 days that my Satellite Pro 6100 after some time (it can be 30 minutes or 3 hours) shut down itself.
I've tried to update bios from version 1,70 to 1,90 with no result. I tested my HDD and it works fine. I formatted and reinstalled WXP Pro SP2 but the problem it's always there.
When it crash, at the restart it appears "BAD RTC BATTERIES" and "BAD CMOS", I've to press F1 then I exit without changing anything.
I saw that 3 weeks ago appears at the start that message:"PXE- E61 MEDIA TEST FAILURE CHECK CABLE'' and ''PXE-MOF EXITING INTEL PXE ROM" but the notebook works fine until 2 days ago.
I don't know why but each times I restart now it stop when WINDOWS XP mark is on the cyan window (not the first WXP logo on black page, but the second on the cyan window); then to make it works I have to press CTRL + ALT + CANC and it goes to the desktop.
I don't know what to do? Toshiba center it's far from my city, if u can help me will be appreciated.
Sorry for my English, I've read some post but exactly with my problems there's no post.
Thanks in advance, that's a great notebook I hop to save it.
p.s. there's no dust on it, I tried to lift the keyboard to clean but it was already clean, even behind on the fan.

Hello supertraz,
Please read further ahead (2nd page) in the forum on the link from my previous post. There is a written step by step guide, but...
It is not very easy to be done by yourself if you don't have the proper tools and experience... Neither do I want to encourage you to do it yourself as you might end up with a completlly damaged notebook, instead, I'd like to suggest you to consult a computer repair store in your neighborhood and ask them to resolder the specific area.
Here's a link on how to access the interior of your notebook you were asking for (with pictures):
http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm
Regards,
electrochain

Keyboard information needed for Sat Pro 6100

Hi, i have a Satellite Pro 6100 model number PS610E-03SKV-EN
I have damaged my keyboard and need to replace it and i was wondering if anybody knew what is the part number that i need for my laptop to replace my keyboard.
Thank you

Thank you for the advice about the German Keyboard, I shall know to definitely avoid buying one in the future. I was interested in this item because it was a white keyboard in my part number and i would have liked a white or different colour keyboard. I didn't win the auction anyway so i am not going to be disappointed there.
My keyboard from America has arrived and i am disappointed by it slightly. I do wish that i never bought it now. Even though i got it very cheap the delivery cost me $40 dollars because i had to ship to a friend and then she shipped it out to me. What i am dissappointed by is the fact that this keyboard does not even have sign on it and neither does it have a euro sign either. I am not going to install it myself but i am also going to be on the look out for a UK keyboard now because i am not so happy with this one. I find it very odd that a symbol was not on this keyboard.
I have removed keys number 3 and 4 from my current keyboard and placed them on my new one but this has meant that things are going to be messed up and this means that i will be without a hash key now as well so i do think that a UK keyboard would be better for me.
There were other things different as well.The space bar is longer on this keyboard part that i bought and it only has three keys beside the space bar on my right hand side and it has not got a Alt Gr key but two Alt keys. I am thinking that there may have been something not quite right with the keyboard.
The parts number of this item that i purchased is -PS610U-03SR17 as listed on the auction and underneath the keyboard is part number-
UE2027P22
I hope that this will be even compatible with my laptop and be able to handle the spec that my laptop has such as the hotkeys etc if i do decide to use it.
The one that i bought does look very similar to this one.
http://cgi.ebay.co.uk/UE2010P22-TOSHIBA-PRO-6100-KEYBOARD-POWERSELLER-965_W0QQitemZ6793625622QQcategoryZ31568QQssPageNam eZWD2VQQrdZ1QQcmdZViewItem

Satellite Pro 6100 screen compatibility

Hello!
Is there a place i can check screen compatibility for my Toshiba SP 6100?
I have damaged a screen on one of my laptop and would like to replace it.
Thanks

Hi
The problem is that Satellite Pro 6100 was delivered with four different displays.
14.1' (1024x768) TFT colour display,
15.1' (1024x768) TFT colour display,
15.1' (1400x1050) TFT colour display,
15.1' (1600x1200) TFT colour display
I have found a information that a P000334230 (LTN150X4-L01) screen is compatible with your unit.
http://www.getpartsonline.com/p000334230.html
But I recommend asking the Toshiba service partner in you country for compatible screens.

Satellite Pro 6100: Fn keys not working

Hello,
Ive got a Satellite Pro 6100 notebook. Im having trouble using the secondary function keys (im not sure what they're called!). When I press the function (Fn) button, the light below the F10 button come on as it should, but when i press any of the F buttons i.e brightness up/down, nothing works!
I had a quick look at some of the keyboard help and troubleshooter in control panel which suggested the driver may be incorrect so i tried looking for an updated driver, but windows said i have the latest driver.
Does anybody else have this problem with the SP6100? Can it be fixed? If so how?!
Any help would be great.
Thanks - Kavi.
Message was edited by: kavi

Hi
Even the Windows said you use the latest drivers, you should reinstall the drivers.
Firstly remove the Hotkey Utility Emulator for Display Devices from Add & remove programs.
The reinstall the common modules and Hotkey Utility Emulator for Display Devices.
Hope it helps pleas let us known if it will work or not

Satellite Pro 6100 Graphics Card Upgrade/Replacement

I have a Satellite Pro 6100 p4-m 2.0 30gb and the graphics card has died. I love this laptop.
It had an NVidia GeForce4 420 Go 16mb
Can I replace it with a GeForce4 420 Go 32mb from the same models.
Is there something more powerful available that works with no problems for the 6100? ie. GeForce4 440 Go 64mb?
Cheers

Usually toshiba didnt offered a separate graphics card update but there were different graphics cards installed in your machine and THEORETICALLY you can use every of these cards in your machine. I cannot promise it but they should all work in this machine.
The problem is that you have to disassemble the machine completely and if you make something wrong then you know that there is no point of return since your machine is not anymore in the warranty. Maybe it would make sense to give the machine some technician to exchange the graphics card.
Unfortunately I cannot tell you which graphics cards fit in your machine or which partnumbers are needed. In this case youre on your own.
Good luck

Product recovery CD/DVDs for Satellite Pro 6100 ?

Similar Messages

Maybe you are looking for