Product Recovery help needed

Hi
I need to do Product Recovery and as a non technical silver surfer I'm very nervous about getting it right.
So far I've saved all my data files but I don't know how to save my favourites and all my outlook messages.
Due to validation error message I can't access Outlook but I'm hoping there is some way that I can still save the messages.
Any advice will be appreciated.
Thanx in advance.

Hello
You must not be nervous about it. Recovery procedure is simply to do and after 20 minutes only you will have clean preinstalled operating system with all necessary drivers.
Only thing you must do is data backup.
For outlook messages follow instruction given by Akuma.
With favourites do you mean favourites in internet explorer?

Similar Messages

Replacement Product Recovery CD Needed (A60)!

I am sorry to bother you all but I am in need of assistance. My Product recovery CD for my Toshiba Equium A60 has gone missing and my laptop will not start. Can anyone here point me to a solution as all my e-mails to Toshiba Europe have been undelivered. The problem with my laptop is that the computer crashed while installing a new windows XP patch and some of the start up files got damaged. Now the computer will not start properly and stats that :
Windows could not start because the following file is missing or corrupt:
System32\Drivers\Ntfs.sys
You can attempt to repair this file by starting Windows Setup using the original Setup CD-Rom. Select 'r' at the first screen to start repair.

Ok thanks for the feedback so far.
Lets try Jasmin11's idea first. I have a copy of Windows xp(Home edition) I have inserted this cd into the Laptop but i still get this message.
Windows could not start because the following file is missing or corrupt:
System32\Drivers\Ntfs.sys
You can attempt to repair this file by starting Windows Setup using the original Setup CD-Rom. Select 'r' at the first screen to start repair.
When I press any Key the computer restarts and nothing changes. How do I get my computer to install the Windows CD? I have pressed the 'r' key during every part of the start up and all it does is restart my computer. I would like to exaust this option before I have to go and phone Toshiba and wait for a new CD.

Interactive product photography - HELP NEEDED

Does anyone know of a good tutorial that explains the
photography process for creating 360-degree interactive Flash
tutorials?
I have several small sculptures I would like to photograph
digitally, but could use direction on; lighting, number of shots
needed for a smooth rotation, and tips on stitching the frames
together.
I would also appreciate any recommendations on authoring
tools and final file formats - I'm currently looking at the
"360-Degree Interactive Product Viewer, V1.0" extension.
I will need only rotate and zoom functionality.
Thanks in advance for your help.
-Sam

Hello
You must not be nervous about it. Recovery procedure is simply to do and after 20 minutes only you will have clean preinstalled operating system with all necessary drivers.
Only thing you must do is data backup.
For outlook messages follow instruction given by Akuma.
With favourites do you mean favourites in internet explorer?

Recovery help needed for Equium A300D-13X

Hi all,
After experiencing too many problems to list with my Equium A 300D 13X, both hardware and software, I decided to go ahead with a complete restoration to factory settings.
My first step was to create 2 dvd recovery discs, using the Toshiba recovery disc creator.
As far as I can tell, both recovery disc's were successfully created, insofar as the recovery disc creator said as such.
Not knowing what step to take next, I started the laptop with the fist of the two recovery disc within the disc drive, thinking this would reset the laptop to it's factory settings, however it did not.
Now when I start up the laptop I get the following message;
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
which restarts the laptop again displaying the above message.
Pressing F8 on start up does nothing.
Pressing F12, multi boot selection, brings up a Boot Menu with 3 options;
HDD1: TOSHIBA MK2046GSX-(S1)
CD/DVD: MAT****ADVD-RAM UJ-850S-(PM)
LAN: Marvell Yukon 88E8040T
If I select the CD/DVD option, a black screen with the text ;
Windows is loading files
is shown. I'am guessing this is the correct path to recovery,
however after the following recovery utility screens regarding language selection etc, a text filled dialogue box
X:\windows\systems32\cmd.exe
runs through, but ultimately becomes static at the line:
Copying F:\06948XSP.swm to V:\HDDRecovery\SWImg 1/6
without successfully finishing the recovery process.
Any help in resolving this problem would be greatly appreciated.
Kind regards,
Kev.

> My first step was to create 2 dvd recovery discs, using the Toshiba recovery disc creator.
> As far as I can tell, both recovery disc's were successfully created, insofar as the recovery disc creator said as such.
What to say buddy you have done everything correctly.
The recover disk has been created successfully (did you see a message saying this??).
Booting from recovery disk should start the recovery procedure and you should follow the installation on the screen.
Usually this should function.
The error; BOOTMGR is missing says that boot manager on HDD has been deleted and its not possible to boot from HDD.
You should boot from CD as you did; pressing F12 choosing CD/DVD drive
Try to format the HDD again using another Windows CD.
In such case you will need to set SATA mode to compatible in BIOS and then you could boot from WinXP CD.
After that try the recovery disk again

Standard Product Costing help needed

Hello SAP Gurus,
To cost a manufactured product, my company does the following:
Raw material cost+ labor hours* labor rate+ overhead+subcontracting charges (if done)
overhead = labor hours* overhead rate
Please guide me as to how I should configure the overhead cost elements, costing sheet and other configurations.
I have read up the material on product costing but am finding it difficult to do the settings in my scenario.
Please help me. Its very urgent.
I will award the points immediately.
Thanks,
Eilzaa

Elizaa,
For this you need to define Costing Sheet.
You need Base --- On which Overhead need to applied
Overhead Key -- how much percentage/value of overhead need to be applied
Credit key --- Offsetting crediting Cost Element and Cost Center
Suppose you want to Apply $20 overhead on every 1Hr Labor then .
Assume you have 2 Activity types with respective allocation Cost Element 91000 and 91001
Overhead Cost Element is 94000 and overhead Cost Center is 1000
Your calculation Base is B00 --- with values 91000 to 91001
Your Overhead Key is Quantity Base overhead key O00 -- with Actual overhead and planned overhead of $10 per 1 HR
Your Credit Key is C01 -- 94000 with 1000
Thus, if there is 1.5 Hrs of labor hrs (Activity1 and Activity2) are performed then system will calculate 20+10 = $30 Overhead and will credit 94000 with 1000 Cost Center and Debit the Production order.
So total cost in this example will be
Raw material Cost + Labor Cost based on Activity Prices + $30 Overhead Costs
Thanks
Sivaram

Deleted Mail Account Recovery, Help Needed !!!!

Hello, today i deleted a mail account in mac mail by mistake.
Is there a way of recovering my received emails from this account?
I have looked in the mail box folder that was in the users library but that was empty, is there any way or getting it all back
Many Thanks

Wildo
Stop using your Mac a.s.a.p. as you may be overwriting essential data. Use a serious data recovery program to bring the files back. This is an example program
http://www.prosofteng.com/products/datarescueinfo.php
The folder you need to rescue is
userhome/library/mail/mailboxes

Production issue -help needed

Hi,
I am giving a user-defined java code below, which we need to change. I understod that the fucntion is used to store values in memory. But my doubts are something else.
GlobalContainer gc = container.getGlobalContainer();
AbstractTrace trace = container.getTrace();
int j = 0;
for (int i = 0; i < ConnectEAN.length; i++) {
if (ConnectEAN<i>.equals("__cC_")){
    j++;
    if (PremiseID[j].equals("__cC_")){
      j++;
} else {
    trace.addInfo("EAN = " + ConnectEAN<i> + " Prem = " + PremiseID[j]);
    gc.setParameter( ConnectEAN<i>, PremiseID[j] );
result.addValue("");
I need to know what ' equals("__cC_")   ' means.??? whats the underscore doing there??
Also what does the below line doing?
    trace.addInfo("EAN = " + ConnectEAN<i> + " Prem = " + PremiseID[j]);
Why do we need to add info to the trace? whats is its concept?
Please help.
Thanks,
John

hi John,
trace.addInfo("EAN = " + ConnectEAN + " Prem = " + PremiseID[j]);
This object enables you to transfer messages to the mapping trace. If the trace level is set correspondingly. then the trace is visible in message monitoring (transaction SXMB_MONI). The execution of the mapping is not interrupted when the entries are written to the trace.
so go to SXMB_MONI expend the tree and go to trace you can fond the corrosponding trace out there.
Trace object have the following Methods
1)void addInfo(String message);     Adds a message message to the mapping trace with the trace level info.
2)void addWarning
(String message);     Adds a message message to the mapping trace with the trace level warning.
3)void addDebugMessage (String message);     Adds a message message to the mapping trace with the trace level debug.
regards,
navneet

A105-S4344 Satellite recovery help needed

A short rundown on my situation...
I have AVG virus protection and run scans at least 3 times a week. Unfortunately, some nasty malware got loaded from the web and I couldn't get rid of it. As soon as I downloaded the free Adaware program, I lost almost all capabilities and control of .exe files and multimedia files. I can not run any program other than Windows Internet Explorer (I always use Firefox) including administrative controls in the Control Panel. Before I lost control of my laptop, I performed 3 system recovery's without any success. Are there any ways to get my computer back on track or do I need to order the hard drive reformatting software?
Your input is greatly appreciated.
-Jonathan-

do your laptop come with recovery media or did you make it yourself? did you try holding zero(above P) during boot to get into the system recovery partition? if zero doesnt work you will need to order recovery media. order online or call 1(800)457-7777
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Acrobat serial number vs product URGENT HELP NEEDED

Hi
I bought the Adobe Acrobat 11 STANDART on line at acrobat.com and when the validating screen appear PROCUCT scroll haven't the acobat 11 option, so doesn't recognize my serial number , because says its not product associate with this number!
I can used my adobe and I need it urgently!!!
thanks

I think what you are saying is that during the install, you are being asked for an option and AA 11 is not there. It sounds like you purchased the upgrade and what you need to select is the previous product in that screen and then provide the SN for that previous product. I may be wrong, but that is how I am interpreting your question.

Cq50 142us recovery help needed

hi,
my father in law owns this laptop.
we are in the uk but he bought it in southern cyprus.
today whilst windows vista was updating some files he closed the lid and it was switched off.
now it wont boot just goes to a recovery screen, there is no mention of being able to recover from the hard drive only from disks.
these to my amazment are still blank, basically he never made them and thought the blank CDs were the recovery disks.
if i go to the uk site it wont recognise the laptop but diverts me to the american site but posting is only available in america or canada.
ive tried all evening to find either a solution or some way of getting some recovery disks in the uk but apart from a few dodgy sites i cant get any help.
i then found here and hopefully i can get a solution.
thanks in advance.
gary.......................

Something to try
If you can get your hands on a regular Vista or Windows 7 install disc, you can boot from it and load Windows Recovery Environment, then there will be some tools to attempt repair, the tool you will want to use the Windows System Restore, when it loads it will show you the latest restore point, let it use that to do a system restore and should return it to a state before the update were partially installed, hopefully getting it booting again.
Here is a Vista tutorial, it will be very similar if you use a W7 disc.
http://www.bleepingcomputer.com/tutorials/system-restore-from-windows-vista-recovery-environment/

Windows 7 recovery help needed

I have a pavilion m9357c with windows 7 os. the comp starts up but will not go to the log in screen. It keeps goin to the insert recovery disk or call hp support. Im sure i picked up a virus somewhere with all the programs and add on i have. where can i get a recovery disk disk from so i can retrieve my files and reinstall windows 7 to original state? Or if anyone has any ideas im open to suggestions

Hi,
You can order a recovery kit here. Your PC shipped with Vista 64 bit.
Do you have a Win 7 install DVD?
The recovery kit will not give you access to files on your current HDD.
You may be able to retrieve important files by using Puppy Linux.
Have you entered Setup to verify your HDD is recognized in the BIOS? Your HDD may have failed.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
HP Products:
810-150se Desktop
17t-j000 Notebook
H8 1380t CTO Desktop
560z Desktop
Errare humanum est.

Urgent recovery help needed

Hello I have 817 database on Solaris and I do not have cold back up of the db. The db is in NOARCHIVE mode. I tried to bounce the db but I cannot open the db as I get the following error:
ORA-00355: change numbers out of order
ORA-00353: log corruption near block 2 change 9224405 time 06/05/2006 18:42:20
ORA-00312: online log 3 thread 1: '/u01/oradata/etpdb1/redo03.log'
Here is more info:
SVRMGR> select * from V$logfile;
GROUP# STATUS MEMBER
1 /u01/oradata/etpdb1/redo01.log
2 /u01/oradata/etpdb1/redo02.log
3 /u01/oradata/etpdb1/redo03.log
SVRMGR> select * from v$log;
GROUP# THREAD# SEQUENCE# BYTES MEMBERS ARC STATUS FIRST_CHAN FIRST_TIM
1 1 0 5242880 1 YES UNUSED 0
2 1 0 5242880 1 YES UNUSED 0
3 1 1401 5120000 1 NO CURRENT 9223256 05-JUN-06
SVRMGR> alter database open resetlogs;
alter database open resetlogs
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
Can anyone advise what can I do not to recover the db. Thanks

NO ArchiveLog -- Online Redo Log corrupted.
if you have multiplexing enabled copy the redo log of the other member
and then see if db would open with that.
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14192/strategy002.htm#sthref122
Your case is probably
-> Whether the lost redo log group was current
You have very limited option other than to go back to what ever backups you have.
Engage oracle support is the best option as they may suggest other alternatives, there is a parameter ALLOWRESETLOGS_CORRUPTION but it has serious limitations check with Oracle first.
http://www.sidibe.net/allow_resetlog.html
Good Luck

Production Problem Help Needed From GURUS

I have the following procedure
create or replace package app_security_context_ipay AS
procedure set_region_ccode(i_regionccode IN varchar2);
END;
-- Create package Body which has access to set the context variables
CREATE OR REPLACE PACKAGE BODY APP_SECURITY_CONTEXT_IPAY AS
PROCEDURE SET_REGION_CCODE (i_regionccode IN varchar2)
IS
BEGIN
DBMS_SESSION.SET_CONTEXT('app_context_ipay','region_ccode',i_regionccode);
END;
END;
I have to Pass a long string in it that is
exec app_security_context_ipay.set_Region_ccode
('(130,''375988''),(130,''s1a''),(130,''S1E''),(130,''S1F''),(130,''S1H''),(130,''s25''),(130,''sb8''),(130,''SB9''),130,''SBB''),(130,''SBT''),(130,''SBU''),(130,''SBV''),
(130,''scn''),(130,''SCV''),(130,''seg''),(130,''sfa''),(130,''SNB''),(130,''SNC''),(130,''SPE''),(130,''SRL''),(130,''SS''),(130,''stt''),(130,''SVA''),(130,''SWK''),(130,''SWM''),130,''SXB''),130,''SXC''),130,''SXD''),130,''SXE''),130,''SXX''),130,''SY8''),130,''SZ''),(130,''SZ4''),(130,''SZ5''),(130,''SZD''),(130,''szs'')');
BUT when I pass the string it is truncating after 255 characters.
How can I pass the string to set my predicate to function properly
The Following error I got from the dump file
*** 2006-06-23 16:42:12.103
Error information for ORA-28113:
Logon user : CRUVPD
Synonym : CRUVPD.T_IPAY_USER
Policy name : TIPAYUSER_IPAY_POLICY
Policy function: SECUSR.OE_SECURITY_IPAY.REGION_CCODE_SEC
RLS predicate :
(REGCODE,CCODE) in ((130,'375988'), (130,'s1a'),(130,'S1E'),(130,'S1F'),(130,'S1
H'), (130,'s25'),(130,'sb8'),(130,'SB9'), (130,'SBB'),(130,'SBT'),(130,'SBU'), (
130,'SBV'),(130,'scn'),(130,'SCV'), (130,'seg'),(130,'sfa'),(130,'SNB'), (130,'S
NC'),(130,'SPE'),(130,'SRL'), (130,')
ORA-00920: invalid relational operator
ORA-00920: invalid relational operator
ANY Help is greatly appreciated

Hi Kamal
Thanks for the reply I made the changes but again the same thing is happening. Let me explain you the problem in a bit detail.
we have a web application that passes a token that we use to set the context. If the token is less than 255 characters we dont have any problems but if the token exceeds 255 it truncates the rest that causes the predicate function to issue an incomplete where clause.
When I changed the code with the one you recommended the same thing happend again. Here is the out put.
SQL> CREATE OR REPLACE PACKAGE BODY APP_SECURITY_CONTEXT_IPAY AS
2 PROCEDURE SET_REGION_CCODE (i_regionccode IN varchar2)
3 IS
4 BEGIN
5 DBMS_SESSION.SET_CONTEXT('app_context_ipay','region_ccode',i_re gionccode ,4000);
6 END;
7
8 END;
9 10 /
Then i passed the same token as
SQL> exec app_security_context_ipay.set_Region_ccode ('(130,''375988''),(130,''s 1a''),(130,''S1E''),(130,''S1F'') -
,(130,''S1H''),(130,''s25''),(130,''sb8''),(130,''SB9''),130,''SBB''),(130,''S BT''),(130,''SBU''),(130,''SBV''), -
(130,''scn''),(130,''SCV''),(130,''seg''),(130,''sfa''),(130,''SNB''),(130,''S NC''),(130,''SPE''), -
(130,''SRL''),(130,''SS''),(130,''stt''),(130,''SVA''),(130,''SWK''),(130,''SW M''),(130,''SXB''), -
(130,''SXC''),(130,''SXD''),(130,''SXE''),130,''SXX''),130,''SY8''),130,''SZ'' ),(130,''SZ4''), -
(130,''SZ5''),(130,''SZD''),(130,''szs'')');PL/SQL procedure successfully completed.
*********************************************************************8
Then i queried one of the table that has the VPD on it
SQL> Select count(*) from t_ipay_user;
Select count(*) from t_ipay_user
ERROR at line 1:
ORA-28113: policy predicate has error
I checked the token in the context and find out that it was truncated
SQL> select sys_context ('APP_CONTEXT_IPAY','REGION_CCODE') from dual;
SYS_CONTEXT('APP_CONTEXT_IPAY','REGION_CCODE')
(130,'375988'),(130,'s1a'),(130,'S1E'),(130,'S1F') ,(130,'S1H'),(130,'s25'),(13
0,'sb8'),(130,'SB9'),130,'SBB'),(130,'SBT'),(130,'SBU'),(130,'SBV'), (130,'scn'
),(130,'SCV'),(130,'seg'),(130,'sfa'),(130,'SNB'),(130,'SNC'),(130,'SPE'), (130
,'SRL'),(130,'SS
Is there any way that I can pass the whole token that is greater than 255 character beacuse if it is do able on the Sqlplus level we can modify our application too. And its really important and urgent.
Thanks for all the help waiting for the reply.

Recovery help needed

i tried to help my nephew who was running out of HD space on his mini. got an external hard drive, but missed a step in the instructions and have messed stuff up.
after stumbling around (including an attempt to move from the iPod back to iTunes), here is what i have.
i have a copy of the iTunes folder on the external
the original HD, from which i emptied the trash, has not been written on.
is my best bet to use techtool pro to recover the trashed files (if so, what do i do with them)?
or should i use the copy of the folder on the external (in that case, what do i do with it)?
i should point out, that part of my troubles were caused trying to recover extensive playlists that i lost in the first attempt.
any and all help will be appreciated.

ok, open iTunes. delete songs. change pref to point at the folder on external. drag the music folder onto the iTunes window. that right?
that it?
if i am able to recover all files from trash, will not one of those files (iTunes Music Library.xml?) contain the playlists?
thanks for the help.

Iphoto recovery, help needed

I recently decided to export my photos and videos from iphoto to make space on my macbook pro. What I was unaware of was that when exporting the files needed to be switched to 'original'. Now realizing this mistake I have quite a few video files on my back up hard drive that are all a single black image. Because I removed them entire off of iPhoto and my laptop I can no longer view the videos.
Does anyone know of a way of retrieving the videos based off of the files I still have?

Same as any mistakenly deleted file - if the trash has been emptied then either restore your backup from before the mistake was made or use file recover software like FIle Salvage or a data recover service
LN

Product Recovery help needed

Similar Messages

Maybe you are looking for