Product registration

Having problems with registration. Will not recognize the purchase date. Any suggestions?

Go here..
WARRANTY RESOLUTION CENTER
-Jerry

Similar Messages

How To Resolve Product Registration Issues?

I found it impossible to register my new Toshiba laptop on the registration web site. First, it claimed that my "product is already registered", then would not allow me to attach a PDF of my purchase receipt on the "Change Registration" screen.
I tried calling the support number to get help with registration and was unable to reach a human. I tried lying to the phone system and got tect support, but they said my issue was not theirs to handle.
I also tried to use the link to "Report web site problems", but that link is dead. How can I talk to a human at Toshiba about product registration issues?
This is my first interaction with Toshiba support, and I'm not favorably impressed.
Solved!
Go to Solution.

I would start here.
WARRANTY RESOLUTION CENTER
Good luck!
-Jerry

Product registration website.

Posting in the main forum so someone could give me pointers....
I recently purchased a new Toshiba laptop( L305-S5955) and googled for the product registration website.
One of the links landed me onto: http://www.toshibaproductregistration.com/cgi-bin/reg.cgi
I submitted all the information but then I had this nagging doubt that maybe this was a fake website.
A WHOIS search took me to a 'private member' who has registered this domain.
Can someone confirm if this is a genuine website or a fake one?
Regards!

Not sure. Just click on Warranty on top of this page then go to product registration. It will take you there for sure.

Creative Product Registrat

Hi. Everytime we log in to our laptop, an error message comes up and won't go away. The message says the following:
CREATIVE PRODUCT REGISTRATION
This is not a Creative Sound Blaster Audigy ADVANCED MB Ready System.
This program will only run on a Creative Sound Blaster Audigy ADVANCED MB Ready system.
When I click OK, the message doesn't go away. We still have sound, so I don't know what I need to get rid of this message.
Help!
Thanks.

I recommend getting a startup manager and trying to narrow down just which creative app. is causing the error. You can get a great one from:
www.windowsstartup.com (Starup Inspector)
Make sure to click the "Consult" button after you open it so it checks online for what each file does. You may end up speeding your run speed and boot-time a good bit while your at it too
After you know which app. is causing the problem you can either re-install it or be able to very accurately describe the problem to Creative support.Message Edited by sni'ves on 0-22-2006 2:06 AM

I have installled PE12,I have registrated it (serie number) and I have made an Adobe- ID. (I can find there my registrated product). Still, when I want to start the program, there is a screen that indicates that i have "to registrate PE within 7 days" , W

I have installled PE12,I have registrated it (serie number) and I have made an Adobe- ID. (I can find there my registrated product). Still, when I want to start the program, there is a screen that indicates that i have "to registrate PE within 7 days" , When iI continuer (next sceen) there is a message that the proces can not proceed for "I need an internet commection" which I have!!!! When this problem does not disappear I have to contact Adobe ??....... So please can you help me. I am already many hours trying to get started :-(

CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O.

Cannot registrate my product (PSE 9.0).

cannot registrate my product (PSE 9.0). After entering the productregistrationnumber I receive the answer that it already has been registrated. But I never did.

Well I exactly did these link. It took me to a supportpage.
I first select the product i.e. Photoshop Elements.
Second I select a topic i.e. signing in to my account, or registering my product.
As I find nothing to cover my problem I click on "I still need help".
Then I get 3 choices of which just one is choiceable and that is:
Ask our experts. Our community is at your service 24/7.
And then I'm back to the forum and the circle is closed because I'm moving in a circle
without escape.

PETITION: Valid product serial number required for forum registrati

female54 wrote:
6 months in this thing randomly just gets a hardware problem, and i hadn't used it for a while, so its not like I dropped it. Just randomly this thing says it doesn't feel like working. I lost my recipt in a move, so now all is lost. I don't want to pay for a repair, when I can just buy something else that won't die like Creative's stupid stuff does. The worst part is that you guys make it so darn difficult to get it fixed. You guys owe me an Ipod. I'd rather not have the hassel of e-mailing you guys and all that jazz, paying for it to be sent, and then paying for the repair. So silly, this place is not customer geared at all. I wish I knew this before I spent my hard earned money on the player. Oh and Itunes is a way better program aswell.
I don't know about the rest of you, but I've really had enough of this. Those shiny white elitist iSheep 'i use a mac so i'm better than you and my poo doesn't stink' fanboys come and post in the forums, wasting our time (and bandwidth). We think someone needs help, only to read through the trog's post and see thier "iPods rule, all else drool," motto.
So I propose this: Anyone who wants to register for the fourms would require a legitimate (and the algorithm knows if it's legit) serial number for their product. This would do two things: one, keep people from registering 4.352x0^3 names and flaming or inciting riots. Second, the product would be on file (and would help other users in determining possible options for support/repair, i.e. open it up and replace the HDD, or send it in).
If you want to bash creative, fine. Be prepared to back up your claim. If you want to be a fanboy, do it on your blog and not where people are truly seeking help.

No way. I don't have a creative player, but I'm looking to buy one. Would this mean that I can't ask questions about the player on this board, or help others who are also intrested in the same player as me? This board is a great source of information, much better than the actual information on the Creative site.
People are angry with their products because they have a reason to be. I admit that some angry customers are just using the forum to let off their anger, but you should have to put up with that. If you look at it from a positi've view, it shows us that that particular player may have problems. If you don't like the look of posts like that, then just ignore them.

Registation of a product

my old computer has brook down and now i need the photoshop 2 that i had on my old pc on the new one but i can seem to registrat it what do i do

It is a photoshop 2 and I have windos 8 if it that what you mean
Fra: SG... [email protected]
Sendt: 4. marts 2014 20:21
Til: Irina Jensen
Emne: registation of a product
Re: registation of a product
created by SG... <http://forums.adobe.com/people/SG...> in Photoshop General Discussion - View the full discussion <http://forums.adobe.com/message/6178658#6178658

Will Adobe stand alone products work on a surface pro 3?(non cloud)

Looking at buying my wife a new computer and she thinks she wants a tablet, just wondering what options will work, still have an unused license key as well as the one she is currently using(she has photoshop, illlustrator). I am not in design and know nothing about the products other than I've seen them in use on her laptop.
Thanks for the help.

We've seen nothing but issues trying to use Surface 3 with software. All came down to the use of their N-trig pen.
I'll divide the issues up:
-some programs flat out refused to recognise the pen driver
-some programs didn't recognise the size of the active area, meaning, when you put your pen down, your cursor actually appears at an offset
-some programs refused to recognise pressure sensitivity
-some of the programs that did recognise pressure sensitivity, did so poorly, since the pen only has 256 levels of pressure sensitivity, and is set up to work with wacom pens that have exponentially more, it clips those 256 levels down....so 256 ..which should be the most pressure, becomes a low pressure because the program thinks there should be more levels, it clips your pressure range, which makes it unusable
-custom software didn't work nearly as well because of bugs in the N-trig driver, some of them have been resolved, some have not
Do with this info as you wish, our experience has been horrible.

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Custom report for SO vs production qty

Hello
Can someone advise on how to achieve the following.
Scenario: Production orders are created based on sales order. Mutiple POs can exist for each SO.
Create a BI report which will report Sales order qty and production qty (actual GR qty) by month
infoproviders: 0PP_C01 and 0SD_O01
Fields:
0SD_O01: 0DOC_NUMBER, 0S_ORD_ITEM, 0REQU_QTY, 0CREATEDON
0PP_C01 : 0DOC_NUMBER, 0GR_QTY
Can some one tell me how to build a logic in BI report to first select all SOs based on created date (selection screen input) and use that to pick all the POs and get the actual GR qty.
Tks. KS

In this extractor, find the reference document for 0DOC_NUMBER ( PO number)
0PP_C01 : 0DOC_NUMBER, 0GR_QTY
For every PO Created there will be some reference Sales order.
Include this in your extractor, Update data from this two extracors in two DSOs and further update to infoproviders for reporting
In your current list of fields provided, you have not taken the reference doc that relates both

Report for open orders and amount of product confirmed

Hi All,
Can some one give me an idea on a report which shows open orders and also shows amount of product confirmed against these open orders?
Thanks,
Neelima.

Hi Veni,
Incomplete order are the order's in which some data is missing so that particular order can't be further processed, that is what you could check through "Incompletion Log". Whereas Open orders are the orders which are open for further processing viz. deliver billing(but open order is a complete order i.e. no data missing).
Check this program:
*& Report ZGM_OPENPO *
REPORT ZGM_OPENPO NO STANDARD PAGE HEADING LINE-SIZE 132 LINE-COUNT 36(2).
TABLES: t001w, "Plants/Branches
ekko, "Purchasing Document Header
ekpo, "Purchasing Document Item
marc, "Plant Data for Material
mara. "General Material Data
DATA:
BEGIN OF itab OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
beskz LIKE marc-beskz,
mmsta LIKE marc-mmsta,
END OF itab.
DATA: BEGIN OF iekpo OCCURS 0,
ebeln LIKE ekpo-ebeln,
menge LIKE ekpo-menge,
aedat LIKE ekpo-aedat,
wemng LIKE eket-wemng,
END OF iekpo.
DATA: BEGIN OF iekko OCCURS 0,
ebeln LIKE ekko-ebeln,
lifnr LIKE ekko-lifnr,
bedat LIKE ekko-bedat,
ekgrp LIKE ekko-ekgrp,
END OF iekko.
selection-screen:begin of block b1 with frame title text001.
SELECT-OPTIONS werks FOR ekpo-werks OBLIGATORY.
SELECT-OPTIONS matnr FOR ekpo-matnr.
SELECT-OPTIONS beskz FOR marc-beskz.
SELECT-OPTIONS bsart FOR ekko-bsart.
selection-screen:end of block b1.
INITIALIZATION.
AT SELECTION-SCREEN ON werks. "Validate for werks
SELECT SINGLE * FROM t001w WHERE werks IN werks.
IF sy-subrc 0. MESSAGE e429(mo). ENDIF.
AT SELECTION-SCREEN ON matnr.
SELECT SINGLE * FROM mara WHERE matnr IN matnr.
IF sy-subrc 0. MESSAGE e429(mo).ENDIF.
START-OF-SELECTION.
SELECT * FROM marc INTO CORRESPONDING FIELDS OF TABLE itab WHERE werks IN werks AND beskz IN beskz AND
matnr IN matnr.
SELECT ebeln FROM ekpo INTO CORRESPONDING FIELDS OF TABLE iekpo
FOR ALL ENTRIES IN itab WHERE matnr = itab-matnr AND loekz EQ space.
SELECT ebeln lifnr bedat ekgrp FROM ekko INTO CORRESPONDING FIELDS OF
TABLE iekko
FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln AND bsart IN bsart.
SELECT ebeln menge aedat FROM ekpo INTO CORRESPONDING FIELDS OF iekpo
FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln. MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
SORT iekpo BY aedat.
DELETE ADJACENT DUPLICATES FROM iekpo COMPARING ebeln.
SELECT wemng FROM eket INTO CORRESPONDING FIELDS OF iekpo FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln.
MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
END-OF-SELECTION.
DATA : file_name TYPE string.
file_name = 'c:\pay_det\open_po1.xls'.
DATA : BEGIN OF it_join_fields OCCURS 0,
field_name(20),
END OF it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'ebeln'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'menge'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'aedat'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'wemng'.
APPEND it_join_fields.
CLEAR it_join_fields.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = file_name
filetype = 'ASC'
APPEND = 'X'
write_field_separator = 'X'
TABLES
data_tab = iekpo
FIELDNAMES = it_join_fields
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT iekpo.
IF iekpo-menge NE iekpo-wemng.
WRITE:/4 iekpo-ebeln,21 iekpo-menge ,46 iekpo-aedat, 56 iekpo-wemng.
ENDIF.
ENDLOOP.
if sy-subrc 0. write / 'no data exist for this plant'. endif.
TOP-OF-PAGE.
uline 1(80).
WRITE :/ sy-vline, 20 ' OPEN purchase ORDERs report' color 5,
80 sy-vline.
uline 1(80).
WRITE:/ sy-vline , 4 'PURSCHASE ORDER' COLOR COL_HEADING,
20 sy-vline, 21 'ORDER QUANTITY' COLOR COL_HEADING,
45 sy-vline, 46 'item change' color col_heading, 55 sy-vline,
56 'RECIEVED QUANTITY' COLOR COL_HEADING, 80 sy-vline.
uline 1(80).
END-OF-PAGE.
WRITE :/ 'PAGE NUMBER' ,SY-PAGNO.
Hope this helps you.
Regards,
Chandra Sekhar

Open Production Order

Hi have to create a report that has open sales order , open po , open pur req , open planned order and open Production order.
I need the logic for OPEN PRODUCTION ORDERS.
The status of the production orders are maintained in JEST Table .
I need logic to elimate the completed production orders during my selcet . Since JEST Table has multiple entries and for some orders that are released the 'DELV' status wil not be maintained at all at that time.
I wil really appreciate your help , if you can tell me how to emliminate the completed production orders during my select query to get the open prod orders.
Is there any fun moduel or bapi that wil give the Open prod orders ?? or any std report that gives open PO??
Thanks

for this you can use the Function STATUS_TEXT_EDIT , for this pass Objnr (get the objnr from AUFK table using the production order) it will give you the status in the LINE exporting parameters.
Import parameters               Value
CLIENT                          100
FLG_USER_STAT
OBJNR                           QM000200000010
ONLY_ACTIVE                     X
SPRAS                           EN
BYPASS_BUFFER
Export parameters               Value
ANW_STAT_EXISTING
E_STSMA
LINE                            OSNO NOTE   "this is the status text
USER_LINE
STONR                           00
if line CS 'DELV'
"ignore the Order
endif.

Report for daily production and daily sales

Can you any body Please let me know which fields we should pick to create custom report containing production qty and sales qty day wise for each material

Hi Veesh,
Whats the scenario you using there? i mean to ask
Discrete
REM
or
PP-PI
Thanks & Regards,
Abu Arbab

Report for daily production and daily sales quantities

Can you Please any body let me know what fields and tables should I pick to generate a report for sales qty and production qty for a material on daily basis. we are using PP PI

Hi,
You can use table MSEG for that purpose. Try BUDAT-MKPF as one of the selection parameters and use
MBLNR-MKPF = MBLNR-MSEG
MJHAR-MKPF = MJHAR-MSEG
Sort the results in ERFMG-MSEG and ERFME-MSEG using
BWART-MSEG = 101 minus 102 (for production)
SOBKS-MSEG = E
BWART-MSEG = 601 minus 602 (for sales).
Above stuff might be useful to you for your development requirement provided you are having Sales Order specific production.
Thanks & Regards,
Abu Arbab A

Product registrati​on

Similar Messages

Maybe you are looking for

Product registration