Product Request: Line-In Recording for Micro (or a USB Doo-D

I think the Micro would really benefit from that level of functionality.
There are two ways it might work, but I don't know the technical sides...
: the headphone jack is not just a source or dread; it's also Remote-Ready. This may point to additional input uses for the hardware, if there is the firmware to exploit it.
2: a line-in accessory could certainly be attached through the mini-USB jack. Again, the firmware would have to support it, but I would certainly pay for a doo-dad that let me record lectures and whatnot with an external microphone, not to mention the whole "record from a CD player" aspect, great for my numerous partially-scratched disks that my computer refuses to read...
Plus, a USB doo-dad would trans-product - they could be used with all the other players that use the mini-USB jack to transfer data. Anyway, a feature like that is too good to only feature in the N200.

I've just found a Yahoo! Group that discusses audio recording with Creative's Nomad Jukebox 3:
http://grou
ps.
yahoo.com/group/njb3tapers
So that's more proof that there's an interest in that. Maybe not as widespread, but I think one of the reasons the NJB3 was as successful was because of its recording capabilities, because as simple MP3 player it was too big, so it was the extra features such as line-in recording that made it stand up.

Similar Messages

Quality of line-in recording for zen nano p

how good is the line-in rec for ZenNP? is there any background disturbance? most of my songs are on tapes. so if i encode them, will it sound the same as playing it in my walkman?

Put the audio CD into your PC and rip the CD to wma or mp3 files using Windows Media Player. PB

Line-in Recording for iPad?

I use a 17 inch MacBook Pro for recording special songs and sermons at our church but would like to switch to using my iPad. It sure would be nice not to have to lug the MBP to every service.
I'm not a sound guru. I just plug a cable into the line-in on my MBP and record using QuickTime, convert it to MP3 using iTunes, then podcast it using another software.
All the mics come into a box (mixer?) and then there's this small cable that has a line in for my MBP at one end and it plugs into the "box" with RCA jacks at the other.
What would it take, hardware and sofware-wise, to do the same thing using my iPad that I'm doing with the MBP? (I mean just the capturing of the sound--I can transfer to the MBP at home for converting to MP3 and podcasting.)

Well, sometimes you can use the headphone jack with an adaptor, but I personally think you'd be better off doing the USB part of the camera connection kit with some kind of interface like the griffin imic. I myself use the Blue Yeti directly into the CCK, but for your purposes I think that would probably be insufficient, especially since you already have the other hardware.
Definitely figure out your recording app first (I use DAW) and then see what they recommend. Different apps are designed to work with different hardware connections. Most recording apps on the ipad will do the conversion to MP3 and some will even do the podcast upload for you.

How do I monitor my 'line-in' recording with my Sound Blaster USB Mp3

I'm recording tracts of my band from a MD via line in. How do I monitor what's being recorded (in real time)?
Sound Blaster USB Mp3+
Thanks,
Mike

my problem seems similar to prior post.
I have attached Creative USB Sound Blaser MP3+ a.k.a. SB0270 to a Compaq Presario 700 lap top computer via its USB .0 port. I'm running WinXP Home with SR-2 update.
I have found that I CAN record audio using Creative's Wave Studio by first selecting "Line-In" in Microsoft's "Volume Control" software Options/Properties/Recording. "Line-In" then appears as the label on the record level control in Creative's Wave Studio. This was not the intuiti've choice as music fed in through a USB port supposedly uses the SPDIF (Sony Phillips Digital Interface Format). Selecting the SPDIF in Microsoft's "volume control" doesn't work.
However, although I can record the audio, I can not find any way to monitor the level of the audio while recording. When recording using Creative's Wave Studio, an indicator (lower left of screen) shows it is in the recording mode, but the level indicator is a straight line at zero / baseline. Furthermore, the input signal can not of been too small to be seen, because the graph shows nearly full modulation on playback.
How does one monitor the recording level while recording?

Zen Micro- Line in recording????!

i've just seen on the cnet review site that the zen micro has line-in-recording and i've owned one for month but didnt know this!!
more importantly, if this is true, how comes i havent come accross it in the menues?
is it possible and how?

Proof that CNET is not a trustworthy source. They have their head stuck too far up Apple's butt to RTFM.
Heh
And no, it does not have line in recording.

Creative zen micro line-in recordi

I read a review of the zen micro at CNET.com, and their short video clip tells me that the zen micro has line-in recording. However, nowhere does it state/mention that feature in the zen micro homepage, nor is it mentioned in any other site. I would just like to confirm that the zen micro doesn't have line-in recording...

Yep, the CNET.COM video review did mention about a line-in recording function. But maybe because that video was recorded way before the Zen Micro was actually launched, therefore there was a mix up in information. And so no, Creative Zen Micro does not have a line-in recording function. However, the Zen Neeon and Zen Nano Plus does have line-in recording if you're interested =)

No records for cube in production!

Hi,
we have a strange ituation where in i am finding records for a cube in dev but not in production!
i had transported right from infoobjects ( which i had added in dev for cube enhancements ) to update rules to production but still i did not find any records in production!
can u pls tell me what could be the problem? or i had missed something in transportaion?
Thanks,
Ravi

Hi,
I don't understand.... Do you expect to see the same records in your cube in your prod sys than in your deve sys just by transporting the change?
No: you have to load your cube with data in prod!
or do you think that when adding a new IObj in a cube and transport the changes then the new IObj will be populated?
No either, you'll have to reload your data.
please describe in detail your issue
hope this helps...
Olivier.

How to get the sample repository data of over 6000 records for products

Hi,
I have MDM installed and ready to use with the standard 9 repositories provided by SAP. I was wondering if I can get the unarchive .a2a file with the sample data of records (I think over 6000 records) for the Products repository. I have tried to bring in the two .a2a product files that I have, but it was giving version inconsistent errors. How do and where do I get the real sample data (not the one we can create in data manager) correct version provided by SAP, so that I can get my hands on SAP data manager funtionality.
Thanks in advance,
N@v!n K

Hi Navin,
Business Content archives that are provided by SAP for MDM do not come with the sample data.
In the bsuiness content ,if you unzip the file you will see the a2a archive of the rep as provided by SAP and the import /export maps and the lookup data file.
There is no main records that SAP provide with the sap content it is basically the data modell that SAP provides so that the foundation is set for you and you can now import and work with the data.
However if you wish to use the demo repository or the training rep from Inquera then you will same some sample data already loaded in MDM rep to work upon.
Regarding the version problem
Check the MDM version of the business content rep with the MDM server you are using .They have to match to work correctly.
You can work with a lower archives of the rep(say SP04) with an Upgraded MDM server (say SP06) by using the Update Repository option in the context menu of the MDM server in Console.
But the vice versa is not possible.
Check you MDM server version by clicking on the MDM server and see its details in the right side record detail pane.
To know more on the demo and Inquera rep kinldy view the below links:
https://www.sdn.sap.com/irj/sdn/nw-demomodel#section21 (Demo Rep)
http://www.inquera.com/InqueraCatalog/CustomerLogin.asp(Demo Rep from Inquera you need to register and they will mail you)
Hope It Helped
Thanks & Regards
Simona Pinto

How to round quantity with FMS for some items in Production order lines?

Hello,
How to round the quantity with FMS or SP for only some items in the composition of Production order (lines) and the bill of materials like a box or a stick that should not be with commas.
Exemple of Production Order
P1
M1 | 234,78
M2 | 104,04 --> 104
M3 | 60,7
M4 | 512, 00
M5 | 107,67 --> 108
and others will not be rounded
Thanks,
Hafid

Hi Gordon,
you're always the first to respond, thank you.
Its when adding the production order, before its creation or when entering the quantity of product in OWOR.
Like :
SELECT CASE WHEN ($[$37.4.0] = 'M2') OR ($[$37.4.0] = 'M5') THEN ROUND (T0.[PlannedQty],0)
ELSE T0.[PlannedQty] END AS PlannedQty FROM WOR1 T0
or
SELECT ROUND (T0.[PlannedQty],0) FROM WOR1 T0 WHERE T0.[ItemCode] =$[$37.4.0] AND (T0.[ItemCode] = 'M2' OR T0.[ItemCode] = 'M5)
Thanks,
Hafid

BDC Recording for creating a new Transport request

Hi folks,
I have done BDC to update a view. It has to update the values in view and create a new request at run time. Its working fine in foreground. But when it comes to back ground, it shows error, saying no batch input data for that screen. Here i am cliking 'create new request' icon to create new request and system will generate a request at runtime. So it might be showign that error. Could any body suggest me how to handle this error. How to create a new request in BDC recording at ruen time....Thanks in advance..
Shyam.

Hi Shyam,
Please check the recording. I think you have missed some thing while recording.
Best regards,
raam

Transport Request is not flagged for import into production.

When I try to migrate a CR from the quality system to the acceptance system, through solution manager system, the status flag still remains to be "To be tested" which normally does not happen.
I get 4 warnings as below:
1) Status was reset by system
2) No import into test system has taken place.
3) Transport request is not flagged for import into production
4) The tester role cannot be the same as the developer role.
Usually when a CR is selected for migration to Acceptance, the status flag automatically sets to "productive", which in turn depicts that the CR has been migrated to acceptance and is ready for import into production.
But when I check the Transport log in the acceptance system, it is evident that the CR has been migrated to acceptance with errors.

I guess these errors you mentioned are the reason why ChaRM reports your transprot request as
2) No import into test system has taken place.
1) Status was reset because 2) is not fullfilled.
3) did not get flagged because status was not set due to previous errors.
4) business partner of user with function "tester" (apparently the one who tries to set status) is the same as the business partner assigned to function "developer". If it should be the same person you can switch off the warning in customizing.
Try to correct import errors and repeat status switch.

Downloading Pricing condition records for products from ECC to CRM

Hi All,
I have a requirement where i need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
Note: 1. The Products are already in the CRM system.
2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
Thanks & Regards,
Shwetha.

First of check and ensure that if the records are already downloaded. To do so,
1) Log to ECC system and go to tcode V/06
2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
1) Log to CRM system and go to se16
2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
4) query the table with input parameters like Product or Sales Org. YOu should find the records.
If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
Hope this helps
Regds,
Raghu

Update Opportunity Totals button on Opprtunity Product Revenue line items

Hello,
In our application, the sales process is managed at the product revenue level. Each product line item goes through various stages and could be in the intiall state or get cancelled as well. I need to exclude these product revenue line items while updating the Revenue amount at the Opprtunity Header. With the <Update Opportunity Totals> button, the total is updated at the header irespective of the product reveneue status. I think I need to build a custome webservice to do that.
I need to find out if the <Update Opportunity Totals> button can be made read-only or removed based on roles and priveledges.
Thanks

Robin,
You can't turn off the button, but OOTB functionality can help you manage this. In our case, we created a workflow for the Revenue Record Type. The workflow watches for changes to the status of any Opty Revenue record, via the "Before modifed record saved" trigger event. When a user changes the status of an Opportunity Product Line Item to a specified value, "Lost" in our case, the workflow automatically updates the Quantity value at the line item to 0, and the Revenue and Expected Revenue values at the Opty Product Line Item level are calculated to be zero accordingly. When the user updates the totals at the Opty level, the totals inlcude only the records that have revenue associated with them at the Opty Prod Line Item level.
I assume your requirements are similar and the same approach could be used in your case.
Good Luck,
Thom

How to create a service product with a condition record?

Hi all
I'm quite new to CRM programming and I now need to create a service product with a condition record. For creating the product I use function COM_PROD_SERVICE_MAINTAIN_API and it creates a product propperly. The function offers parameter IT_CONDITIONS for creating conditions. But when you have a look at type COM_PRODUCT_CND_API_TAB of the parameter, then you will find a deeep tabletype with lots(!) of additional tables. In the conditions tab of the product I simply enter a Condition Type, a Sales Organization, a Distribution Channel, an Amount, a Currency and a Unit and everything is fine after saving.
Can anyone of you help me in how to set up parameter IT_CONDITIONS to get the above values into the product?
Thanks fou you help,
Michael Drechsler

Hi,
The link is https://support.oracle.com , you will have to request Oracle to link your user with your company support account.
Cheers,
Vlad

Line In Recording Level Adjustment

I am recording from a tape recorder to the hard drive. I have done this a lot over the years. Suddenly I am no longer able to adjust the line in recording level. I have always before gone to Control Panel/Hardware and Sound/Sound (recording tab), Click Line In, then click on Levels. When I adjust the level, either lower or higher, it does nothing to change the sound level. Can aynone please tell me why this feature isn't working any longer on my computer. Could some other setting have gotten changed? Where should I look? Thanks!!!!

Have you tried to discuss it with mixer manufacturer?
I mean they know own product very well and have best experiences with it.
I presume they have tested it on different hardware platforms and different operating systems so I believe they are the right address where you can ask for help.
In control panel you have standard options for sound but maybe you need something specific for connected mixer.

Product Request: Line-In Recording for Micro (or a USB Doo-D

Similar Messages

Maybe you are looking for