Product sales area data missing in crm

hi, expert
I'm currently having a problem with some of the products that are being replicated from R/3 to CRM.Product sales data initial synchronization is complete from ecc to r3,user create order is ok in crm.After a period of time,product sales area data missing in crm,we don't know when is lost,the problem is that we can't do an order for several products because there's no data in the sales and distribution tab(Sales Org., Distribution Channel) of the product master in CRM.

Hi ,
What you can do is,
Create a request for a material whose Sales Area data is missing in
CRM , and perform the request load in transaction:R3AR4.
And please check whether sales area data flows to CRM.
Put a filter in txn:R3AC1, to download single material or material
range.And before performing an initial load in txn:R3AS,please make
sure that sales area data is missing in CRM.Now, perform the initial
load in txn:R3AS.And please check whether sales area data flows to
CRM.
Check the filter settings in transaction R3AC1 for
object MATERIAL and please make sure that it would bring down all
the expected materials from R/3 along with the sales area data. I guess there is some
filter setting which is blocking it.
Please check the entries you have maintained in table MVKE - the entries
for the sales data maintained here must match with the ones maintained in the
filters.
thanks & regards,
Krishnen
Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM

Similar Messages

Sales area data is missing when Customer contact replicated to CRM

Dear Experts,
I am facing some problem with the Customer Contact replication from isu to crm, problem is when i create a customer contact by using bct0 interaction record is replicated to the crm, when i open the interaction record in the webic i am getting the error maintain the sales area data ,i am manually maintaing the sales are data in the crm could you please tell me why sales area data is missing while replication could you tell me how to rectify this error.I am using the standard transaction type 0010.
Thanks & Regards
Boyz..

Hello Shravanthi,
Have you looked at the screen in the screen painter in ERP (transaction SE51)? Maybe this will give you a clue to what data is missing.
Kind regards,
Johan Wigert

Sales office data missing after patching in CRM

Hi,
We have CRM 4.0 for internet sales.
Recently, we patched our Development and QA CRM systems from SAPKU40009 to
SAPKU40016.
Immediately after the patching, we see that the Sales office information in the BP (Sales area- organization tab) is missing. We have only one Sales org and Dist channel with division not active. All the sales office belong to the same sales org. Nothing has changed w.r.t org model before and after patching and all the org units are checked for determintation.
Everything was working before the patching. Just after patching, we find the sales office information blanked out in the BP and as well as the drop down list is empty.
I can see the sales office table entries for all the BPs in CRMM_BUT_SET0140. But when ichange the BP data (for some other field) and save, the table entries get deleted as i am not able to assign the sales office any more.
We have not buffered the attributes. I tried that also and ran the report HRBCI_ATTRIBUTES_BUFFER_UPDATE, but it is of no use.
Can somebody help?
Thanks
Shankar

Hi ,
What you can do is,
Create a request for a material whose Sales Area data is missing in
CRM , and perform the request load in transaction:R3AR4.
And please check whether sales area data flows to CRM.
Put a filter in txn:R3AC1, to download single material or material
range.And before performing an initial load in txn:R3AS,please make
sure that sales area data is missing in CRM.Now, perform the initial
load in txn:R3AS.And please check whether sales area data flows to
CRM.
Check the filter settings in transaction R3AC1 for
object MATERIAL and please make sure that it would bring down all
the expected materials from R/3 along with the sales area data. I guess there is some
filter setting which is blocking it.
Please check the entries you have maintained in table MVKE - the entries
for the sales data maintained here must match with the ones maintained in the
filters.
thanks & regards,
Krishnen
Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM

Trying to add sales area data to sold to party in CRM using

Hi all,
i am trying to add sales area data to a sold to party business partner and i used the BAPI BAPI_BUPA_FRG0010_ADD. it executes i dont get runtime error but i get the error "invalid sales and distribution area" in return table.
also i see that the sales area data of the sold to party is not updated after i execute my program
can anyone tell me what i am missing
Edited by: jessica sam on Nov 13, 2008 8:17 PM

hey Rob i dont know if the configuration is done.but if i try to create a sold to party business partner in the screen in CRM i sales area data tab----->sales area, i find the drop down list with the values for sales organization, ditribution channel and division.
i am able to create a sold to party in CRM and it is replicating in ECC. but if i try to display the sales area data of a sold to party that i created using the function module BAPI_BUPA_FRG0010_GETDETAIL
it throws me an error saying invalid sales area data.
Also i find that data is there in CRMM_BUT_LNK0021, CRMM_BUT_LNK0031 tables but not even one entry in CRMM_BUT_LNK0011
Also i find that data is there in CRMM_BUT_SET0020, CRMM_BUT_SET0030 tables but not even one entry in CRMM_BUT_SET0010
is some thing missing in functional configuration. the CRM guy did an intial upload from R3 and brought the sales organization to CRM.

Sales Area Data isnt replicating from CRM to ECC

Hi Gurus,
We are replicating some BPs of certain groupings from CRM to ECC.
We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
steps results are as follows:
u2022     BP General Data is replicating without any trouble.
u2022     When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
Monitoring SMW01.
The BDOC BUPA_MAIN ended with the following error:
Messages for business partner 0007000362: Fill in all required entry fields
Action already taken:
After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
Is there something I am missing here.
Thanks for your help.

Hi,
Regarding debugging from CRM to R3. Please follow the below steps.
There are 2 methods to debug the Business Partner (BP).
First Method:
1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
2)     You can use transaction code SU01 to check User Type of User.
3)     Deregister the Queue through SMQS.
4)     Make changes to BP.
5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
Second Method:
1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
4)     Go to SMW01 and type /h and process the BDoc.
5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

No sales area data in CRM

Hello,
When we download BP or product for R/3, the sales area data are not available in CRM.
We checked :
- in the org model, the flag 'object relevant for determination'
- programs HRBCI_ATTRIBUTES_BUFFER_UPDATE and CRM_ORG_INDEX_CREATE
But no effect.
What we noticed is table CRMD_ORGMAN empty.
Any advice?
Thanks
Regards,
Fred

Hello Frederic,
I also maintained the table T77OMATTR to activate buffering for Service and Sales.
Next I ran the report HRBCI_ATTRIBUTES_BUFFER_UPDATE .
The job runs, but on our system (development and quality) the job is finished after only 4 to 5 seconds, which seems a bit to fast in my eyes.
do you have any idea which tables are being filled by the report?
and has anyone an idea about the time it takes in average to run the report HRBCI_ATTRIBUTES_BUFFER_UPDATE ?
thanks for a reply
davy

Tables in CRM- Sales Area Data

Hi,
We have downloaded the Customer Master from R/3 to CRM system. Initial Load was successful and delta is also working fine. We are getting the R/3 sales area data in CRM system when we open a BP.
But here our issue is, we could not locate the sales area data in any of these below CRM tables -
CRMD_ORGMAN
CRMM_BUT_FRG0081
CRMM_BUT_FRG0080
This data we require for BW purpose, Can anyone help me where I can get this data?
The Bdocs coming from R/3 to CRM contains complete sales area data.
Thanks&regards,
kalyan

It depends on the tab you have maintained for sales area.
CRMM_BUT_LNK0011 holds the sales area data for the sales tab on the screen.
CRMM_BUT_LNK0021 holds the sales area data if the shipping tab is maintained.
Similarly if the billing tab is maintained, you ll find the data within the CRMM_BUT_LNK0031 table.
I hope this helps.
Regards,
Gaurav Gera

Customer sales area data not replicated to CRM

Hello,
I'm setting up the data replication model for master data based on configuration guide C03.
We have the following customer master situation:
existing customers with nr range 500000 - 599999 and account group A are created in ERP and replicated to CRM.
new customers with nr range 600000 - 699999 and account group B are created in CRM and replicated to ERP.
PIDE settings are fine.
The initial download of CUSTOMER_MAIN en CUSTOMER_REL went well. I've set a filter in CUSTOMER_MAIN on field KUNNR: value between 500000 - 699999. Everytime a sold-to business partner is created in CRM or a customer is created in ERP, the data gets replicated to the other system.
So far so good.
But here comes the problem: when I assign a sales area to a customer created in CRM (nr range 600000-699999) in ERP, the sales area data is NOT replicated back to CRM. When I assign a sales are to customer created in ERP (nr range 500000-599999) in ERP, the sales area is replicated back to CRM.
Do I have to run BUPA_MAIN? I don't think so, because sold-to business partner are already replicated to ERP.
Is the filter in CUSTOMER_MAIN not good? Should I split the nr ranges into 2 rows: 500000-599999 and 600000-699999 instead of 500000-699999
System environment:
CRM 7 EnhP2 (CRM RDS)
ERP 6 EnhP6
Kind regards,
Koen

Hello,
I found the problem. The PIDE was not set up completely: I only set the account group for ERP customer in the 'R3-->CRM' dialog structure. I've added the account group for CRM customers as well, and now customer data of CRM customers added in ERP, is replicated to CRM.
Cheers

Prospective Account Sales Area Data on CRM Online

Hi Experts,
I am using CRM2007 SP4, and i am trying to assign Sales Area Data to a Prospective Account on CRM Online. However, unlike a reqular Sold-to account (CRM000) there does not seem to be a Sales Area Data Button where the Sales Area can be maintained for a Prospective account.
The BP Role for the Prospective account is BUP002.
It only seems possible to maintain this through the Web Client. Is there anyway which the Sales Area can be assigned to a Prospective Account through CRM Online.
Any assistance would be appreciated.
Thanks,
Jonathan

Hi Sasha,
I've been checking it in our system (CRM 6.0). The field Price group (cust) from ECC (KNVV-KONDA) gets standard replicated to field Price Group (Cust) on the billing tab of customer data (BP).
No additional customizing or development is needed.
The field is stored in: CRMM_BUT_SET0030-PRICE_GROUP
regards,
Wim

CRM - Bapi for creating relationship between BPs with sales area data

Hi
I am looking for BAPI for creating relationship between business partners with sales area data in CRM 5.0.
Example - I would like to create relationship type CRMH03.
Bapi BUPR_RELATIONSHIP_CREATE does not allow for maintaining sales area data (Sales org, distribution channel, division).
Does anybody know such a bapi?
Regards
Radek

Hey Radek,
I am actually looking for the same functionality. Were you able to find a solution although no one replied to your question in this thread? If so, it would be very helpful for me to know. Maybe you have to combine more BAPIs in order to add the organization information to the relationship. But I have no idea how.
Best Regards
Mirko

CRM 3.0 BP Maintenance - Sales Area Data

Hi Gurus
In CRM 3.0 for Transaction BP
In the Sales Area Data is a Tab for Partner Functions.
In which table is this Partner Function data stored please. Please do not provide a Structure name as I am not technical
Many Thanks
Panduranga

Hi Panduranga, how are you?
The information contained there is in table CRMM_BUT_FRG0081.
Kind regards,
Garcia

CRM BP type Sold-to-party Sales Area Data button not displayed

Hi Gurus,
Currently we are in the system preparation stage, but there's a problem in BP maintenance. For the BP type Sold to Party, the sales area data button is not showing up in the button bar with the General data. I only can see General data and Relationships here.
The sales area has been maintained in the system already and can be displayed in the reference bp. Not sure any config will affect.
Appreciate if anyone can give me a clue.
Rgs, Michelle

Hi,
If you have chosen the role, and the button is not coming up following could be the possibilities:
1. It might sound funny but it is a possibility that You might ALREADY be in the Sales Area data screens. Check if the "General Data" button is active. if it IS active then you ARE in the Sales area data.
2. If not 1, above, then check the authorisation for the id to create BP for Sold to party and / or Sales area.
3. Still No, then check if the screen config for creating BP is std or its a customised one wherein maybe the button has been rendered inactive. You can check by taking an existing BP who might already be a sold to part for a sales area. If this is your first case for a Sold to party then you might look at the screen config for sure.
Do write back if you still need help.
Regards,
Tariq

CRM 5.0 Sales Area Data - Organization Tab

Hi All,
We have upgraded to CRM5.0 and as a result, under Sales Area Data a tab called 'Organization' has appeared and I cannot seem to remove it through field groupings even though all the fields available under field groupings are hidden.
Under field groupings there are 3 fields for configuration:
District
Sales Group
Sales Office
These are all hidden. Yes on the Sales Area Organiation tab two greyed out buttons appear:
Own Data (with create icon)
Own Data (with delete icon)
Also under sales area data there are other tabs such as 'Shipping' and 'Fact Sheet', all their fields are cojnfigured to be hidden and as a result their respective tabs (correctly) do not appear on the screen.
Does anyone knowe if it is possible to remove these and what is the correct way to remove this tab from the screen?
Many Thanks for any help/advice given.
David

Thank you, Gregor.
I'm still confused by the following portion of the release notes "The person and organization are saved with the target group."
It would be a problem for my company if organizations remained in the final target group.
Thanks again, Matt

Preset Sales Area Data in a new account of a company - CRM WebClient UI 7.0

Hello,
how can I preset the Sales Area Data with Sales Org. ID, Distribution Channel and Division when I apply a new company (account).
Thanks for your help!
Kristin

Hi Aaron Smith,
It will be great, if you guide us in how to delete the sales area of a business partner from Web UI.
I had tried SAP Note 1906379 and 725857 but i still can't delete sales area as such from business partner.
Your response is much appreciated!!!!

Business Partner - CRM Sales Area Data disabled

Hi Experts,
Facing a small problem in Business Partner screen.
I have created a Sold-to-Party role and when i go to the Sales Area Data
data set, i should be able to Choose Sales Area for determining the Sales Org and Distribution Channel. But the Button Choose Sales Area
is not enabled. Kindly help me out in Enabling this button so that i can choose Sales Area and determine the Sales Org and Distribution Channel.
Thanks
Shiva

Hi,
1. Go to transaction sm30
2. Open T77OMATTR in display mode.
3. Select SALE and go to Attributes/Scenarios.
4. Now go to the detail of attributes IS_SA_GRP, IS_SA_OFF and
IS_SA_ORG.
There you will see that Flag is not checked for 'Simulated'. For
Enhanced model it should be checked. Check the checkbox for all the
three attributes and then run the report
HRBCI_ATTRIBUTES_BUFFER_UPDATE.
Smita.

Product sales area data missing in crm

Similar Messages

Maybe you are looking for