Product Short description in SAR for MM-SUS scenario

Hello Experts,
We are implementing MM-SUS scenario, where we are releasing the Schedule agreement for vendor.
SAR is reaching to SUS, but the product short description is not appearing on the SAR screen on SUS.
Could any one help us on this?
Any solution will help us a lot.
Thanks,
Aakash

Hello,
could you solve this issue? I just got the same problem.
If you found a solution, please tell me how you dealt with.
Did you change the Mappings in XI?
Kind regards,
Barbara

Similar Messages

Settings for Purchase Order output using services for MM-SUS scenario?

Dear Gurus,
I am configuring the service procurement classic and plan driven procurement for MM-SUS
environment. We are on SAP SRM 7.01/ECC 6 EHP5.
I need to maintain the below settings for PO output:
1. RUN transaction SWETYPV
2. IN the object types field, enter CL_SE_PUR_WF_OUT.
3. In the event field, enter CREATED.
4. In the receiver type field, enter WS53800008.
5. In the receiver function module field, enter SWW_WI_CREATE_VIA_EVENT_IBF.
6. Select the 'Linkage Activated' checkbox.
7. Save your entries.
Similarly, one more entry for the event CHANGED.
However, the system is not allowing me to save the settings.
If I choose BOR Object Type 'CL_SE_PUR_WF_OUT', it gives an error message 'Object type CL_SE_PUR_WF_OUT is not defined'.
If I choose object category 'Business class for object type CL_SE_PUR_WF_OUT, it gives an error message 'Class CL_SE_PUR_WF_OUT is not a business class.'
There are similar entries in the table SWETYPV for object type CL_SE_PUR_PO_WF_OUT' with object category CL.If we copy the entries and tries to replace the
object type 'CL_SE_PUR_PO_WF_OUT' with CL_SE_PUR_WF_OUT and save it, it gives an error message 'CL is not used for workflow event'.
Could you please help me on how to configure the settings for PO output from ECC system using services?
Any input is highly appreciated.
Thanks and regards,
Ranjan

Hi Ranjan,
Please add the value 'CL' in the table SWF_CATIDS
Then it will work.
With Regards,
Malay

Problem in processing of SAR in MM-SUS scenario

Hi,
We have upgraded SRM4.0 to SRM 5.0 in MM-SUS scenario. We have a problem in processing of SAR list on the supplier logon portal.
When we click on All SAR list on supplier home page to display the list of SARs its going in infinite loop and giving timeout error after 30mins. When we checked in transaction SM50, found that program is not able to read records from table BBP_PDVIEW_IAP.
Number of entris in this table are 16lac.
Can anybody suggest the probable reason and solution?
Thanks in advance.
Regards,
Prashant

Hello,
could you solve this issue? I just got the same problem.
If you found a solution, please tell me how you dealt with.
Did you change the Mappings in XI?
Kind regards,
Barbara

PI mapping content for MM-SUS scenario?

Dear Guru's,
We are configuring MM-SUS scenario with SRM on 7.01 and ECC 6 ehp 5 and PI 7.02. While configuring the PI scenario for the above integration, we are not finding the required mapping for the purchase order output from the ECC side in the PI scenario.
We have imported XI Content for SRM SERVER 7.01, SAP APPL 6.05, SRM SERVER IC 7.01. Aprat from this any other XI content needs to be imported into PI SLD ?
For the interface PurchaseOrderERPRequest_Out_V1 from MM to SUS, do we required to do the PI mapping manually or any XI standard content is available. If so, please help me with the Content Details.
Thank you.
Ranjan

Dear Nikhil,
As suggested by you earlier, we have imported the content for the integration scenario 'SE_SERVICE_PROCUREMENT' and we have found all the required content. Only thing missing is the mapping for ERP PO REQUEST OUT in the PI content.
I am wondering whether SAP is not giving the standard content and we need to develop our own content for mapping or there is a direct call in place.
Anybody who has used the scenario, what was the approach? or is there anything we are missing?
Thanks and regards,
Ranjan
Ranjan Sutradhar

SUS Material PO for EBP-SUS scenario

Hi All,
We are planning to implement EBP-SUS scenario for PO.
My Question is Can we use EBP-SUS scenario for material PO,POR and ASN
in extended classic mode.
Please help.I need this info urgently.
Also if anyone has config settings document for this scenaio then I would appreciate
if they can share with me Priyasinghsap at gmail
Thanks in Advance.
Regards,
Priya
Edited by: priyasinghsrm on May 23, 2010 11:20 PM

As far as I know, extended classic senario is not supported in SUS, only the following senarios is supported.
1) SUS-SRM ( In this case, SRM should be local.)
2)SUS-MM(R/3) (Only separate ERP system)
Because, in extended (classic) , there're over ERP/EBP systems, when post confirmation, system might have problem,
Eventhough, some customers is using, but this senario is not supported and customer need modification to archive this.
The SUS-EBP (service procurement) and SUS-MM (plan driven procurement) can be used only separately but not mixed.
Does anybody have more inputs?
Regards
Lauren

Mapping Error in XI Configuration for MM-SUS Scenario

Dear Experts,
I am working on MM-SUS Classic Scenario,
We have done all basic setting in SRM, ECC and SUS.
Now we are configuring XI Scenario(Working on ESOA Architecture), while configuring XI Scenario, I follow the mention steps :
I have started from Integration Builder in XI (using T-code SXMB_IFR)
1. I have assigned two Business System( for ECC and SUS) In integration Builder (Creates Communication Channels Automatically) .
2. Modify IDOC and XI Communication in ERP and SUS Business system respectively.
3. Now select Tools -> Transer Integration Scenario from Inegration Repository and Create Scenario in it properly
(Included Assign Services, Configure Connections, Generate etc).
4. In last, save scenario.
After configuration XI I am not getting Scenario Data (Objects and Configuration Overview data) in it.
When i click to Check Configurability under Model Configurator of mine Scenario, I found following Errors ( I am Mentioning only some errors) :
Component View SE_Services_Procurement: Connection from Send Z_CREMAS_SUSMM to Business Partner empfangen has no mapping
Component View SE_Services_Procurement: Connection from Send_PO_From_MM to Receive_Purchase_Order has no mapping
Component View SE_Services_Procurement: Connection from ServiceAcknowledgementConfirmationRequest to ServiceAcknowledgementConfirmationCreate has no mapping
Component View SE_Services_Procurement: Connection from InvoiceRequest senden to Receive INVOIC has no mapping
Kindly correct me if am missing some, and help me out, what should have been done to remove this mapping errors.
Thanks in advance,
Regards,
Pawan Keshwani

If you are on >= SP9 you do not need to perform that action at all.
Go to SU01 transaction assign SAP_XI_DEVELOPER role for the desired users and try it.
regards
Shravan

Change the standard XI content for SRM SUS scenario

Hello everyone,
I am implementing the "Plan driven procurement with supplier integration" scenario which integrates the SAP R/3 and SRM-SUS.
I have imported the standard XI content available on service market place for the scenario.
Now i have to modify the scenario. I have to add some additional fields in the inbound message for purchase order request.
The proxy classes for these interfaces were already created in the SRM system.
So now after changing the message type what all things i shd take care of e.g like creating the proxy newly etc.
Thanks and Regards
Rahul Nawale

Hi Shabarish,
Thanks for your reply, but i have a couple of more questions.
1.I can find a function module called from the method present in the proxy class generated.
METHOD ii_bbpx1_preq_request_in~execute_asynchronous.
CALL FUNCTION 'BBP_SAPXML1_EXTREQU_UPDATE_IN'
EXPORTING
is_purchreq_request = input.
ENDMETHOD.
so since i am changing the purchase order request do i have to do any changes in the function module as well.
In the function module Proxy Structures are mapped to the API Structures and then the API is called using BBP_API_EXTREQU_UPDATE function module.
Thanks and Regards
Rahul Nawale

Asking for advice on adding products with descriptions to webpage

I am a web design and dreamweaver newbie and am in my very limited experience, working on creating a virtual mall. I'ts something I always wanted to do...go figure..lol. I do have a lot of companies that will advertise and I have access to their Java and HTML links. I have created (in my mind...lol) I pretty decent start on a homepage from a free template and I want to create pages with pictures and descriptions but I am not sure the best way to go. I cannot afford to have a pro do this for me so I am fishing for some good advice. I know about creating tables but I hear that tables are so 90's and dreamweaver can do it better in a different format. I have looked through the forums for advice but not have found what I am specifically looking for. The way I have it from the homepage is that I have links to product types in the content portion of spry accordian and created pages akin to my homepage to display them but from there...not sure. I do not have a lot of available free time, hardly any to be honest, so if anyone can point me in a good direction or have any good ideas, I would really appreciate it. Here are my questions:
1. Is there a better method to display products besides tables in CS4, and if so, how would I best proceed? The idea is 3 columns and 4 rows of products with descriptions underneath. The links provided by the companies would take them to the company website to purchase. I didn't want to alarm the companies by posting a site without some products available but I need some help.
2. Is it possible and if so, is it a good idea to add a spry tabbed panels into the content portion of the spry accordian? Would I have to establish an editable region or something specific to allow it to be functionable?
Separate Question:
1. I am not sure if I can even ask this coherently but will give it a shot Does DW have a tutorial on adding some type of flash css or revolving pictures to be built into my header area on the homepage? I do have DW fireworks and I really want to spruce it up...
I will load the homepage online today to www.virtmallshop.com. The product links pages won't be availabe except one to give a reference. Understand that you all know a heck of alot more about this then me so please be kind!
Thank you
D

For Umlaut, you could probably use phonetic keyboard. Highly recommended.
Use "Ukelele" to create keyboard layout and use dead key to map umlaut (like 'u = ü). With phonetic keyboard you can type as fast as with native keyboard (if not faster) and in unlimited number of languages, without re-learning the layout.
Brackets are quite easy accessible on Apple keyboard.

Use short description on OLAP dimension member in disco for OLAP

Hi All,
I've noticed in the spreadsheet add-in you can decide under "query options" whether to use the Long or Short Description when displaying a dimension member. How do you do the same in discoverer PLUS for OLAP ? I cant find it anwhere.
Cheers,
Brandon

This feature is not available in Disco :-( Logged as an enhancement request.
Keith

How to import the column short description for Datastore in ODI

Hi
I am loading AS400/DB2 table in to oracle db staging tables. These AS400 table has 70 to 80 columns each with short description. Using common format designer I am able to get the DDL for the oracle db so that I do not have manually type in the table definition.
1. But how do I get the each column short description into Datastore?
2. In oracle Datastore where does the COLUMN Comments appear?
Thanks
obieefan

in snp_table->table_desc column
comments cannot be reversed when using standard reverse.
for db2 400, I suppose you can use "RKM DB2 400", i can see it reverse table comment as below
select     DBXLFI     TABLE_NAME,
     DBXLFI     RES_NAME, /* DBXFIL for system name */
     case
          when      LOCATE('<%=snpRef.getModel("REV_ALIAS_LTRIM")%>' ,DBXLFI) <> 0
          then      SUBSTR( DBXLFI , LOCATE('<%=snpRef.getModel("REV_ALIAS_LTRIM")%>' ,DBXLFI) + CHAR_LENGTH('<%=snpRef.getModel("REV_ALIAS_LTRIM")%>') )
          else      SUBSTR(DBXLFI , 1 , 4)
     end     TABLE_ALIAS,
     case DBXATR
          when 'PF' then 'T'
          when 'TB' then 'T'
          when 'VW' then 'V'
     end     TABLE_TYPE,
     Trim(Substr( IfNull(Trim( Both From DBXTXT ), ' ')||' '||Ifnull(DBXREM, ' ') , 1 , 250)) TABLE_DESC,
     0     R_COUNT
from      QSYS.QADBXREF
where     DBXLIB     = '<%=snpRef.getModel("SCHEMA_NAME")%>'
and     DBXLFI     like '<%=snpRef.getModel("REV_OBJ_PATT")%>'
and     DBXATR     in ('PF' , 'TB' , 'VW')

How to get the XML file if we are using the Product short name.

Hi,
Till now I have used Short name of the Concurrent Program for Code while creating a Data Definition. Now saw a seeded template which has given the Code by Product short name. If we have the concurrent program then it is easy to refer the fields by checking the XML file. In this case how to find the XML file or how to refer all the fields if we have given code with Product short name. I saw this for iReceivables(ARI). Anybody please help me.
Thanks.

Hi Siva
Just to clarify, rather than the short name of the conc program there is a shipped data definition that just uses the product short name? What is the data def so I can check it.
Regards, Tim

Product Category Description 2 in SRM missing

Hello,
we have the issue, that the Product Category Description 2 is needed in the SRM System. The replication from ERP just giving Product Category Description 1. We are running SRM 7.0 and habe ECC 6.0 (EHP4) as Backend.
What would be the best way to solve this?
1. Enhance the master data replication and
2. Enhance the dataobject Product Category in SRM with the field wgbez60 to store the data
How can an enhancement to the replication be done? Is there a BADI as for vendors available?
How the middleware program need to be changed?
Thanks for your reply
Regards
Edited by: trevor_987 on Dec 2, 2010 12:12 PM

Hi. In that case....
Go to BBPSC01 in the GUI, get the search help name from the category field.
Go to SE11 and change the search help to add a new field and put in a search help exit just like any other search help.
This way you can use the search help exit to read both descriptions from the backend and populate the search results.
This will allow users to see both descriptions when searching.
After they choose a category they will only see 1 description in the cart though.
You could implement a custom field and use BBP_DOC_CHANGE_BADI to populate the second description. It will be shown in a different section on the cart though.
Alternatively you could look at changing the templates, that would be quite tricky for something this complex though.
Regards,
Dave.

Solaris 10 with Trusted Extensions - Security Audit Events [short] Descript

{color:#000000}I know that the security audit events and classes in Solaris 10 have changed when viewing these files: audit_class, audit_event, and audit_control with that of the same files for TSOL8. In order to perform an accurate and acceptable review of the audit events, I need to find either a file or document that provides a short description for each of the audit events within each audit class. Can anyone point me in the right direction or a URL? I have tried to search through the Sun docs and have not yielded any results. {color}

been there, done that
The problem is a function of your network definitions. The non-global zones do not have an IP address to match for your global zonename. The error message results from the system established default of the DISPLAY variable failing (DISPLAY=globalzonename:0.0).
To confirm this, login to the global zone as root and "zlogin -S" to the non-global zone. Once there, the command "netstat -r" should show the IP address of the global zone instead of the expected global zonename. (combine this with a look at your output for "ifconfig -a" within the same non-global zones) Another command you should fail with will be the "getent hosts galaxy". Anyway, if you manually set your DISPLAY variable to the "IP Address" of the globalzonename and execute a "dtterm" ... it should work fine.
If it does not violate a security policy, I suggest you add the IP address of the global zone to either the /etc/inet/hosts or /etc/inet/ipnodes file within each non-global zone.

Finding tables with their short descriptions or finding short descriptions

Is there any Tcode at whose screen I can find the short explanation / description of the tables (for example short description for VBAK: Sales Document - Header Data). Also is there any Tcode at whose screen I can make search with keywords for finding the tables that I need.

Is there any Tcode at whose screen I can find the short explanation / description of the tables (for example short description for VBAK: Sales Document - Header Data).
Check the tables in T.Code SE11:
DD02L : ALL SAP TABLE NAMES
DD02T : DESCRIPTION OF TABLE NAMES
DD03L : FIELDS IN A TABLE.
Also is there any Tcode at whose screen I can make search with keywords for finding the tables that I need.
Reward Points if useful.

Urgent:short description display

Hi Experts,
Basically my tool is developed to detect the syntax, warnings,upgrade and unicode errors of other programs.
At output i'm creating a field as short description in which i want to display each program short description which we declare while creating a program.
so i want for each and every program means if i provide at selection screen one program or multiple programs at output for every program it as to display its short description also.
i hope u understood what i meant to say. If u don't please let me know.
regards,
aadi.

hi,
just create a report by selecting data from that table using condition name and sprsl.
now in output display those fields.
check this code.
tables: trdirt.
data:itab type standard table of trdirt with header line.
select-options: s_name for trdirt-name.
select * from trdirt into corresponding fields of table itab
where name in s_name.
loop at itab.
write: /10 itab-name,itab-text.
endloop.

Product Short description in SAR for MM-SUS scenario

Similar Messages

Maybe you are looking for