Product specific prerequisite checks error

Hi,
I have installed oracle database 11g linux 64-bit which is 11.1.0.6 and i need to upgrade it into binary 11.1.0.7
so i have downloaded the patches 6890831 and 7829321 from metalink and i have unzipped it and proceeded to apply the patch 6890831
Then prerequitics checks has 1 error like this
Checking for Oracle Home incompatibilities...............
Actual Result: NEW_HOME
Check complete.the overall result of this is failed<<<<
But i have specified my oraclehome correctly
What to do

What to do is to post the full and complete log showing us the actual errors rather than just your impression of them.
The fact that you chose the correct ORACLE_HOME is not relevant to the message.
The installer looked at that home and found a problem that it will not ignore and you shouldn't either.

Similar Messages

  • Product-specific prerequisite checks failed

    holle everyone
    When i install oracle 10g for redhat linux AS3.0,i get this error :"checking for openmotif-2.1.30-11;found not found, failed<<<<" in the "product-specific prerequisite checks" phase
    I have used "rpm -q openmotif-*" command,and it's feedback "openmotif-2.2.3-3.RHEL3"
    how can i resolve the problem.Thanks

    Install openmotif21-2.1.30-8.rpm package.

  • Prerequisites check error for English language pack

    Hi All,
    We are installing Diagnostics Agent on Windows Server 2008 R2 Enterprise.
    While installing in prerequisites checker we are getting error about language pack.
    The error log from sapinst_dev is as follows:
    TRACE      2011-11-22 12:29:46.571
    tPRCResults.insertRow(), inserting
    We have already installed SAP Solution Manager 7.1 on that server. But now It is showing error.
    In Region And Language of OS it is showing English (United States)
    Please help us to solve this issue.
    Thanks & Regards,
    Ishan

    Hi,
    As per your question:
    message:Make sure that the English language pack is installed on your operating system so that your support requests can be handled quickly.
    I am sure your English Language Pack is already Installed in your Server,So you have to IGNORE the message and move forward
    with your Diagnostic Agent Installation.
    Thanks & Regards
    Ajitabh

  • Bypass Prerequisits Check errors for packages

    Trying to install 11gR2 on a Desktop PC with Debian 'squeeze' (ver. 6) OS . Installed all required packages suggested. However, am now stopped at the Prerequisite Checks mainly because all the package versions listed as errors (29 packages) are more current than those require by the install. I was hoping not to go back, download and install older versions of the packages. Is there a way to bypass these errors?

    Hi;
    Trying to install 11gR2 on a Desktop PC with Debian 'squeeze' (ver. 6) OS . Installed all required packages suggested. However, am now stopped at the Prerequisite Checks mainly because all the package versions listed as errors (29 packages) are more current than those require by the install. I was hoping not to go back, download and install older versions of the packages. Is there a way to bypass these errors?Debian is not supported, its mean you could hit many error message during installation and also after installation, i suggest use OEL distro(free) instead of Debian
    Regard
    Helios

  • Exchange 2010 prerequisites check errors

    Summary: 6 item(s). 5 succeeded, 1 failed.
    Elapsed time: 00:00:33
    Configuring Prerequisites
    Failed
    Error:
    The following error was generated when "$error.Clear();
              if($RoleInstallWindowsComponents)
                # Install any Windows Roles or Features required for the Management Tools role
                Install-WindowsComponent -ShortNameForRole "AdminTools" -ADToolsNeeded $RoleADToolsNeeded
            " was run: "The system cannot find the file specified".
    The system cannot find the file specified
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:00:02
    Organization Prerequisites
    Completed
    Elapsed Time: 00:00:13
    Languages Prerequisites
    Completed
    Elapsed Time: 00:00:02
    Hub Transport Role Prerequisites
    Completed
    Warning:
    Installing Exchange Server on a domain controller will elevate the privileges for Exchange Trusted Subsystem to domain administrators.
    Elapsed Time: 00:00:05
    Client Access Role Prerequisites
    Completed
    Warning:
    Installing Exchange Server on a domain controller will elevate the privileges for Exchange Trusted Subsystem to domain administrators.
    Elapsed Time: 00:00:04
    Mailbox Role Prerequisites
    Completed
    Warning:
    If Microsoft Outlook 2003 is in use, you should replicate the free/busy folder on this server to every other free/busy server in the organization. This step should be performed once Setup completes.
    Warning:
    Installing Exchange Server on a domain controller will elevate the privileges for Exchange Trusted Subsystem to domain administrators.
    Elapsed Time: 00:00:05
    Any suggestions. I believe it has something to do with missing AD roles and features.
    Server OS: Windows Server 2012 Standard

    Martina is correct.
    And you may also want to re-evaluate installing onto the DC. 
    http://blogs.technet.com/b/rmilne/archive/2013/07/03/exchange-on-a-dc.aspx
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Configuration Manager 2012 SP1 Prerequisite Checker returns "Migration active source hierarchy" error

    Hello, 
    I am getting "Migration active source hierarchy" error in the SCCM 2012 SP1 prerequisite checker on the CM 2012 primary site. The error says "There is an active hierarchy configuration for the migration. Please stop data gathering for each
    source site in the source hierarchy." However, actually there is no migration source hierarchy configured and there are no migration jobs displayed in CM 2012 console. We used to configure this feature to migrate CM 2007 to current CM 2012 without service
    pack two years ago and we have deleted these configurations. 
    In migmctrl.log, the following record is being generated every 60 minutes. 
    ======================================================
    Connection string = Data Source=xxxxx;Initial Catalog=xxxxx;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Encrypt=True;TrustServerCertificate=False;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><04-07-2014
    01:01:53.710+300><thread=6992 (0x1B50)>
    Created new sqlConnection to xxxxx~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
                                                                    [Worker]: Start two step scheduling
    for MIG_Job~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
                                                                    [Worker]:        
    Step 1. Query the schedule items that was running or requested to start immediately ...~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
                                                                    [Worker]:        
    Step 2. Query the first item in order of DateNextRun ...~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.819+300><thread=6992 (0x1B50)>
                                                                    [Worker]:        
            No item found. Sleep until the next event.~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
                                                                    [Worker]: End two step scheduling
    for MIG_Job~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
    [MigMCtrl]: the workitem queue is full!~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
    [MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
    ======================================================
    I am not really sure where to look into in this case. I would appreciate any advice. 

    Hi,
    Could you please upload the full migmctrl.log?
    How about specifying a source hierarchy with the same name and password of the hierarchy before in the console, then click Clean Up Migration Data?
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error for customer specific Authorization check (User Exit)

    Dear Experts,
    I am facing a problem in PM.
    I have created a maintenace plan for calibration via t code IP42 and mentioned the order type PM05. Scheduling is done for the order. I got the order number.
    I have released the order and got the inspection lot number.
    While entering the results recording through t code QE17, the reluts are out of the specified range, i have given the valuation Rejected, immediately system is giving an error message as below:
    "Error for customer specific Authorization check (User Exit)"
    Though there is no user exit activated in the system, this message is coming and not allowing the result recoring for rejection.
    If I'm entering the result recording within the specified range, then valuation is Accepted and its allowing to save.
    I have checked the following user exits:
    QQMA0002: QM: Authorization Check for Entry into Notif. Transaction
    QQMA0026: PM/SM: Auth. check when accessing notification transaction.
    The above 2 User Exits are not active.
    I have also checked a note 429066. But it says incase of any dump for that user exit only its applicable and more over the current version of the system is ECC 6.0 packae 15, where as that note is applicable upto 4.6C.
    Please some one help me on this issue.
    Thanks and Regards,
    Praveen.

    Dear Pete,
    I have cheked with my technical team, There is no hotpacks updated recently. This is the implementaion project I'm in, so performing the cycle for the first time.
    Any how I got it solved, in T code QE17, after entering the Inspection lot in next screen goto menu path Settings - User settings - Defects recording mention the reprt type and tick on Reprt type Changable.
    At the time of result recording if the valuation is Rejected then it ask for defects recording close that window if not rwequired then save, the error message no longer apperaing now.
    Regards,
    Praveen

  • SAPINST ERROR -- PREREQUISITE CHECKER

    Hi Experts,
    I have an issue running SapInst wich I can´t find a solution.
    My Operative System is Windows Server X64 (English) but this message appears:
    "Make sure that the English language pack is installed on your operating system so that your support requests can be handled quickly"
    Any clue?
    Regards.

    Hello Jorge,
    I also got this issue when I tried to install a Netweaver ABAP. I just ignored it, my OS was also in english.
    However, you may try to update the prerequisite checker as described in note 855498 and check if the issue is solved.
           855498     - Installation Prerequisite Checker
    Kind Regards,
    Allam Drebes

  • CPO SAP Adapter pre-requisite Check Error

    TEO 2.3.5 SAP adpater Pre-requisite Error
             Trying to setup an SAP ABAP connection. Satisfied the pre-requisite of SAP NCO sapnco30dotnet40P_7-20007348, still get the following error while checking the pre-requisite.
    Unable to check for prerequisites:
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
    This is what I see in the logs-
    /StackTrace><ExceptionString>System.ServiceModel.CommunicationObjectAbortedException: The communication object, System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel, cannot be used for communication because it has been Aborted.</ExceptionString></Exception></TraceRecord>
    ||735|2013/03/01 07:33:30.028|2084|PoolThread:57|||WCF: System.ServiceModel Error: 131075 :
    ||736|2013/03/01 07:33:30.029|2084|PoolThread:57|||WCF: <TraceRecord xmlns="
    http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord
    " Severity="Error"><TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.ThrowingException.aspx</TraceIdentifier><Description>Throwing an exception.</Description><AppDomain>Tidal.Automation.Server.exe</AppDomain><Source>System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel/59871390</Source><Exception><ExceptionType>System.ServiceModel.CommunicationObjectAbortedException, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The communication object, System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel, cannot be used for communication because it has been Aborted.</Message><StackTrace>   at System.ServiceModel.Channels.InputQueueChannel`1.EndDequeue(IAsyncResult result, TDisposable&amp;amp; item)
       at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.EndTryReceive(IAsyncResult result, RequestContext&amp;amp; requestContext)
       at System.ServiceModel.Dispatcher.ChannelHandler.EndTryReceive(IAsyncResult result, RequestContext&amp;amp; requestContext)
       at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(IAsyncResult result)
       at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result)
       at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously)
       at System.Runtime.InputQueue`1.AsyncQueueReader.Set(Item item)
       at System.Runtime.InputQueue`1.Shutdown(Func`1 pendingExceptionGenerator)
       at System.ServiceModel.Channels.CommunicationObject.Abort()
       at System.ServiceModel.Dispatcher.ListenerHandler.AbortChannels()
       at System.ServiceModel.Dispatcher.ListenerHandler.OnAbort()
       at System.ServiceModel.Channels.CommunicationObject.Abort()
       at System.ServiceModel.Dispatcher.ChannelDispatcher.OnAbort()
       at System.ServiceModel.Channels.CommunicationObject.Abort()
       at System.ServiceModel.ServiceHostBase.OnAbort()
       at System.ServiceModel.Channels.CommunicationObject.Abort()
       at Tidal.Automation.Server.WebService.WCFHost.StopServiceHost(Object state)
       at Tidal.Automation.Common.ThreadPool.OuterWaitCallBack(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback()
    </StackTrace><ExceptionString>System.ServiceModel.CommunicationObjectAbortedException: The communication object, System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel, cannot be used for communication because it has been Aborted.</ExceptionString></Exception></TraceRecord>
    ||737|2013/03/01 07:33:30.164|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP Solution Manager Adapter (95151695-aacc-4310-af5f-c38abfcea384).  Proceeding.
    ||738|2013/03/01 07:33:30.164|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named 95151695-aacc-4310-af5f-c38abfcea384 but it appears to have never been started.
    Stack Trace:   at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
       at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()
    ||739|2013/03/01 07:33:30.165|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP ABAP Adapter (cf6f0f84-a364-4105-b11f-0fef62873b37).  Proceeding.
    ||740|2013/03/01 07:33:30.165|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named cf6f0f84-a364-4105-b11f-0fef62873b37 but it appears to have never been started.
    Stack Trace:   at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
       at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()
    ||741|2013/03/01 07:33:30.221|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP Solution Manager Adapter (95151695-aacc-4310-af5f-c38abfcea384).  Proceeding.
    ||742|2013/03/01 07:33:30.221|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named 95151695-aacc-4310-af5f-c38abfcea384 but it appears to have never been started.
    Stack Trace:   at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
       at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()
    ||743|2013/03/01 07:33:30.222|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP ABAP Adapter (cf6f0f84-a364-4105-b11f-0fef62873b37).  Proceeding.
    ||744|2013/03/01 07:33:30.222|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named cf6f0f84-a364-4105-b11f-0fef62873b37 but it appears to have never been started.
    Stack Trace:   at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
       at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()

    Please open a TAC case.  They can not only get you past the missing prerequisite, but also raise the issue on the bad prerequisite detection error which you are seeing so we can get it fixed in the product.

  • Mass deleting product specific transportation lanes

    I am trying to use MASSD transaction for mass deletion flag of T lanes. Can someone explain what component and attributes should I enter in selection criteria and components and attributes to be maintained?
    I am doing product u2013 product in u201Cselection criteriau201D
    Product u2013 block indicator in u201Ccomponents and attributes to be maintainedu201D
    When I set fixed value to u201CDu201D and save, itu2019s giving me lot of warning and error messages. I doubt if I am using the right selection criteria
    Example of error messages:
    LANE (Product) : Time-based validities overlap
    LANE (Means of Transport) : The validities of means of transportation XXXXX overlap
    LANE (Product) : Product X does not exist in source location Y
    Thx

    Satyajit,
    I deleted the product from location Y and tried MASSD again, still it shos some errors.
    Main error being
    LANE (Means of Transport) : The validities of means of transportation XXXX overlap
    what does this error mean? I cjhecked the vality for both product specific trans lane and means of transport. they both are same. even if I want to change it in change mode, its greyed out.
    I just checked one more material and it did not show any error message. but when I go check in SCC_TL1, i dont see "D" set for that product. do u know why it did not carry over from massd? Thx

  • Primary Site Deploy Prerequisite Check Failed

    1. Symptom description: check failed
    SQL instance when you run the Prerequisite Check SCCM 2012 for a new primary site.
    2. Environment: My remote SQL Server 2008 R2 SP1 CU6 and uses
    a named instance called INST01 (SRV302 \ INST01). My server will be the primary site watch requirements (SRV501). I
    have a VM to test that was used to ratify the SCCM 2012 R2 (vSRV210).This
    VM had a primary site that was the basis of data in SRV302 \ INST01, this site has been removed by the Configuration Manager Setup wizard, he correctly remove the database SCCM 2012.
    3. The
    exact error message: When trying to run the installation of SCCM 2012 server SRV501, filling in as the database and SRV302.domain.com INST01 for instance, it shows the Prerequisite Check Failed one item as:
    "Dedicated SQL Server instance: Configuration Manager requires a dedicated SQL Server instance to host excellant site database. You selected the SQL Server instance That site hosts the Configuration Manager
    database for another site. Select a different SQL Server instance for this new site to use, or
    resolve the conflict by uninstalling The Other excellant site or moving to a different database SQL Server instance. "
    In the file ConfigMgrPrereq.log the message is the same:
    srv501.domain.com; Dedicated SQL Server instance; Error; Configuration Manager requires a dedicated SQL Server instance to host its site database. You selected a SQL Server instance that hosts the site">"<05/03/2012 10:00:21>
    srv501.domain.com; Dedicated SQL Server instance; Error; Configuration Manager requires a dedicated SQL Server instance to host excellant site database. You selected the SQL Server Instance That Hosts the site Configuration
    Manager database for another site. Select a different SQL Server instance for this new site to use, or resolves the conflict by uninstalling The Other database excellant site or moving to a different SQL Server instance. "
    4. Any
    recent relevant configuration change (s): Only completely removed the test site that was with the database in SRV302 \ INST01, rebooted the server and tried to start the installation of the production site using the instance where it was before (no more no
    database SCCM it).
    5. Tech diagnosis history: Have you tried doing a restart of the server and
    the instance of SQL without success. I did a test site to reinstall the test SCCM VM vSRV210, pointing
    to the same instance and it works. But the production server 2012 SCCM has to be SRV501. You
    can not create a new instance of the database only for the production site.
    What can I do to install the SCCM 2012 instance that (SRV302 \ INST01)?
    Is there a procedure for cleanup of an instance of SQL for SCCM 2012?
    Is there any way to bypass this check in the SQL setup SCCM 2012?
    Att. Rodrigo Krug

    Hello,
    Beware of the solution, after removingthe key
    SMS even passed the Prerequisite
    Check, but during the installation,
    it stopped with the following error:
    Can not write CertBootStrap\SMS_SQL_SERVER\ registry
    key on server srv.domain.com.
    The operating system Reported error
    4
    ERROR: Failed to write
    to registry certificate configurationon server
    srv302.domain.com.
    ERROR: Failed to create
    SQL Server [srv302.domain.com]certificate
    remotely.
    I had to recreate the keys from the file. Reg
    so that the installation was successful.
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\CertBootStrap]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\CertBootStrap\SMS_SQL_SERVER]
    No values ​​registered.
    With that I succeeded in installing the
    primary site in that instance
    where we had another base before
    SCCM 2012.
    This was supposed to be your solution?
    Att. Rodrigo Krug

  • Prerequisite check of database instance installation failed on Solaris

    Dear All,
    Please provide your valuable suggestions in resolving the below issue
    We are installing the SAP NW 7.4 EP as distributed installation
    Application server on RHEL 6 and Oracle database on Solaris 11(SPARC).
    We have installed the SCS instance on RHEL  with out any issues.
    While running prerequisite check of database installation on solaris we are getting below errors.
    "Atleast 500MB of free disk space are required for an diagnostic agent installation"
                     and
    "could not evaluate condition obsolete kernel parameters"
    In the sapinstdev_log file we are getting below lines.
    TRACE     
    Found 0 MB of free space on /dev
    TRACE     
    Prerequisite Checker performing checks: Condition hardware::disk_space from package ::j2ee_smd_inst evaluated to PRCCondEvalResult.FALSE. Message: 'At least 500 MB of free disk space are required for an Diagnostics Agent installation. Found 0 GB.'.
    We have tried to increase space for /dev which is not possible in Solaris (As per the OS team).please find the below reference link.
    /dev and the /devices Namespace (System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle S…
    The/dev file system is loopback-mounted into the zone using a read-only mount.
    Please find the file system created for database instance installation.
    Filesystem             Size   Used  Available Capacity  Mounted on
    rpool/ROOT/solaris      29G   973M        28G     4%    /
    /dev                     0K     0K         0K     0%    /dev
    rpool/ROOT/solaris/var
                            29G    49M        28G     1%    /var
    proc                     0K     0K         0K     0%    /proc
    ctfs                     0K     0K         0K     0%    /system/contract
    mnttab                   0K     0K         0K     0%    /etc/mnttab
    objfs                    0K     0K         0K     0%    /system/object
    swap                    30G   1.5G        29G     5%    /system/volatile
    sharefs                  0K     0K         0K     0%    /etc/dfs/sharetab
    fd                       0K     0K         0K     0%    /dev/fd
    swap                    30G   1.5G        29G     5%    /tmp
    rpool/VARSHARE          29G    40K        28G     1%    /var/share
    h2hpool1/Dump           40G   9.2G        31G    23%    /Dump
    rpool/export            29G    32K        28G     1%    /export
    rpool/export/home       29G    32K        28G     1%    /export/home
    rpool/export/home/admin
                            29G    34K        28G     1%    /export/home/admin
    h2hpool1               244G    31K       235G     1%    /h2hpool1
    h2hpool1/oracle        180G    36K       180G     1%    /oracle
    h2hpool1/oracle/EPD    180G    44K       180G     1%    /oracle/EPD
    h2hpool1/oracle/EPD/112_64
                            10G    31K        10G     1%    /oracle/EPD/112_64
    h2hpool1/oracle/EPD/mirrlogA
                           1.0G    31K       1.0G     1%    /oracle/EPD/mirrlogA
    h2hpool1/oracle/EPD/mirrlogB
                           1.0G    31K       1.0G     1%    /oracle/EPD/mirrlogB
    h2hpool1/oracle/EPD/oraarch
                            20G    31K        20G     1%    /oracle/EPD/oraarch
    h2hpool1/oracle/EPD/origlogA
                           1.0G    31K       1.0G     1%    /oracle/EPD/origlogA
    h2hpool1/oracle/EPD/origlogB
                           1.0G    31K       1.0G     1%    /oracle/EPD/origlogB
    h2hpool1/oracle/EPD/sapdata1
                            30G    31K        30G     1%    /oracle/EPD/sapdata1
    h2hpool1/oracle/EPD/sapdata2
                            30G    31K        30G     1%    /oracle/EPD/sapdata2
    h2hpool1/oracle/EPD/sapdata3
                            30G    31K        30G     1%    /oracle/EPD/sapdata3
    h2hpool1/oracle/EPD/sapdata4
                            30G    31K        30G     1%    /oracle/EPD/sapdata4
    h2hpool1/oracle/EPD/sapreorg
                           2.0G    31K       2.0G     1%    /oracle/EPD/sapreorg
    h2hpool1/oracle/client
                           1.0G    31K       1.0G     1%    /oracle/client
    h2hpool1/oracle/stage
                           5.0G    31K       5.0G     1%    /oracle/stage/112_64
    rpool                   29G    31K        28G     1%    /rpool
    h2hpool1/sapmnt         20G    31K        20G     1%    /sapmnt
    h2hpool1/usr            20G    31K        20G     1%    /usr/sap

    Hi Praveen,
    It looks to be more permission issue rather than space issue. Ensure the file system where you copied the DVD has full permission.
    Check the installation logs for more details on which other file system needs full permission and work accordingly.
    Regards,
    Deepak Kori

  • User Exit/BADI for Production Order Availability Check

    Hi PP experts,
    Is there any user exit or BADI which can be used for Production Order Availability Check during order creation/release or while running collective availability check (COMAC) to include additional check conditions such as do not commit quantity (commitment qty = 0) if storage location for a component is missing in the production order due to storage location is not maintained/specified for that component in the material master.
    Note: In this case the availability check is set (configured)  to check at the storage location level.

    Dear ,
    Availablity Check is not Plant Specific or Storage Loaction spefic .ATP does not check the stock for any particualar stock in storage loaction rather it cheks various stocks based inward and out ward movement time through PR/PO/Dependent /Planned Order /Stock Type  irrespective of any Storage Location .
    BAPI which can be used :
    1.BAPI_PRODORD_CHECK_MAT_AVAIL
    can we exclude materials of prod order in availability check
    what is availability check concept  how it is used in SAP
    Check the above if it is useful
    Regards
    JH

  • Oracle 11g R2 client installation on Windows 7 64 bit hangs after performing prerequisite checks

    Windows 7 Professional SP1 64bit OS
    6 GB RAM
    380 GB free space
    Extracted client to C:\Stage\win64_11gR2_client\client
    Ran setup.exe as administrator, but the installation always hangs after step 5 of 7 is completed (Perform Prerequisite checks). Install log ends with entry "INFO: Get view named [SummaryUI]"
    What am I missing here? Any help would be greatly appreciated.
    C:\Stage\win64_11gR2_client\client>dir
    Directory of C:\Stage\win64_11gR2_client\client
    06/15/2013  02:56 PM    <DIR>          .
    06/15/2013  02:56 PM    <DIR>          ..
    06/15/2013  02:56 PM    <DIR>          doc
    06/15/2013  02:56 PM    <DIR>          install
    06/15/2013  02:56 PM    <DIR>          response
    06/15/2013  02:55 PM           341,304 setup.exe
    06/15/2013  02:55 PM                56 setup.ini
    06/15/2013  02:59 PM    <DIR>          stage
    06/15/2013  02:55 PM             4,327 welcome.html
                   3 File(s)        345,687 bytes
                   6 Dir(s)  412,474,404,864 bytes free
    Last few lines of install log:
    WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
    WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
    INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@75f0f8ff
    INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state getOracleHome
    INFO: Completed executing action at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <getOracleHome>
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <getOracleHome>
    INFO: Completed validating view at state <getOracleHome>
    INFO: Validating state <getOracleHome>
    INFO: custom prereq file name: oracle.client_Administrator.xml
    INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: InstallAreaControl exists: false
    INFO: Checking:NEW_HOME
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:ORCA_HOME
    INFO: Reading shiphome metadata from c:\Stage\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
    INFO: Loading beanstore from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: size estimation for Administratorinstall is 1068.0003070831299
    INFO: PATH has :==>C:\Temp\OraInstall2013-06-17_02-55-15PM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\APPS\PuTTY\;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\
    INFO: Completed validating state <getOracleHome>
    INFO: InstallLocationAction to INVENTORY_NO
    INFO: Verifying route INVENTORY_NO
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state prereqExecutionDecider
    INFO: Completed executing action at state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <prereqExecutionDecider>
    INFO: Completed validating view at state <prereqExecutionDecider>
    INFO: Validating state <prereqExecutionDecider>
    WARNING: Validation disabled for the state prereqExecutionDecider
    INFO: Completed validating state <prereqExecutionDecider>
    INFO: Verifying route executeprereqs
    INFO: Get view named [PrereqUI]
    INFO: View for [PrereqUI] is [email protected]e4b
    INFO: Initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Loading view <PrereqUI> at state <checkPrereqs>
    INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
    INFO: Localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state checkPrereqs
    INFO: custom prereq file name: oracle.client_Administrator.xml
    INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: Completed executing action at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state checkPrereqs
    INFO: Waiting for completion all forked tasks at state checkPrereqs
    INFO: Creating PrereqChecker Job for leaf task Physical Memory
    INFO: Creating CompositePrereqChecker Job for container task Free Space
    INFO: Creating PrereqChecker Job for leaf task Free Space: PN-PC:C:\Temp
    INFO: Creating PrereqChecker Job for leaf task Architecture
    INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
    INFO: CVU tracingEnabled = false
    INFO: Nodes are prepared for verification.
    INFO: *********************************************
    INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:PN-PC
    INFO: Expected Value:128MB (131072.0KB)
    INFO: Actual Value:5.9491GB (6238064.0KB)
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Free Space: PN-PC:C:\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:PN-PC
    INFO: Expected Value:130MB
    INFO: Actual Value:384.1495GB
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:PN-PC
    INFO: Expected Value:64-bit
    INFO: Actual Value:64-bit
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:PN-PC
    INFO: Expected Value:1023
    INFO: Actual Value:369
    INFO: -----------------------------------------------
    INFO: All forked task are completed at state checkPrereqs
    INFO: Completed background operations
    INFO: Moved to state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <checkPrereqs>
    INFO: Completed validating view at state <checkPrereqs>
    INFO: Validating state <checkPrereqs>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
    INFO: Completed validating state <checkPrereqs>
    INFO: Verifying route success
    INFO: Get view named [SummaryUI]

    Yes, I've tried using the -jreLoc option but it doesn't seem to like the path.
    Version 6.0.200.2 is at C:\Program Files (x86)\Java\jre6\bin
    C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\Program Files (x86)\Java\jre6"
    Starting Oracle Universal Installer...
    Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
    Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_04-47-16PM. Please wait ...
    The Java RunTime Environment was not found at "C:\Program Files (x86)\Java\jre6"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again
    I downloaded a newer version to C:\APPS\Java thinking the space in the path for Program Files (x86) might be a problem, but that also fails with the same error message
    Version 7.0.210.11 is at C:\APPS\Java\bin
    C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\APPS\Java\"
    Starting Oracle Universal Installer...
    Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
    Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_05-09-13PM. Please wait ...
    The Java RunTime Environment was not found at C:APPS\Java"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again

  • SCCM 2012 R2 Prerequisite Check

    Hello
    I'm stuck with the installation of SCCM 2012 R2. I get stuck at the Prerequisite Check with the following errors:
    1. SQL Server service running account
    2. Required SQL Server Collation
    3. SQL Server sysadmin rights
    SQL 2012 SP1 is installed on the same Windows Server 2012 R2 server that I am trying to install the SCCM 2012 R2 on. I did not use the default instance name during the SQL 2012 SP1 setup and created a name myself. I have also applied SQL Server 2012 SP1
    x64 CU9 before I proceeded with the SCCM 2012 R2 setup. I have put in credentials for a service account (Domain Admin) for the five SQL Services (SQL Server Analysis Services, SQL Server, SQL Server Reporting Services, SQL Server Agent, SQL Server Browser).
    Is it okay if I use the same service account for all 5 services? I have also turned off firewall and disabled the Windows Firewall Service. Why am I getting error number 1?.
    I chose "SQL_Latin1_General_CP1_CI_AS" as server collation during SQL 2012 SP1 setup. If I go to Microsoft SQL Server Management Studio and go to Server Properties, I can see Server Collation is "SQL_Latin1_General_CP1_CI_AS". Why am
    I getting error number 2?
    I have made the Service Account used for SQL Services, the account used to install SCCM 2012 R2 and also a local group on the same server which has the local computer account to "sysadmin" under Server Roles on Microsoft SQL Server Management Studio.
    Why am I getting error number 3?
    Can anyone help me out here please?

    Hi,
    if you setup a named instance, have to configure SQL Server to listen on an static TCP port. (instead dynamic TCP port)
    In SQL Server Configuration Manager, expand SQL Server Network Configuration, and then click Protocols for <instance_name>.
    Expand Protocols for <instance_name>, and then click TCP/IP.
    Right-click TCP/IP,
    and then click Properties
    In the IP Addresses tab, under IPAll, set TCP Port (1433).

Maybe you are looking for