Product Specification and Design Documents

Hi
In one of the white papers on XMLDB it mentions using it as a mean to store design documents. I haven't used xml much and I was wondering if anyone has used XMLDB to do this and if so do they have any resources / examples to get me started.
Cheers
Richard

By web folder do you mean the standard port myserver:8080?
I can access the file this way as well but get the same issue.
I have ftp the document to my c drive. I changed it and then I was able to ftp it back and overwrite the original with hte new file.
The functionality I was after was the document staying in the XMLDB repository, the user updating it via a web browser through the 8080 port and then being able to save it over the top of the file in the repository without having to ftp back and forward. Is this possible?

Similar Messages

BCS blueprint and design documents

Hi all,
Can anyone provide me BCS blueprint and design documents?
Regards,
Suneer.

SAP Note#1171344 and
http://help.sap.com/saphelp_erp60_sp/helpdata/en/62/f7e73ac6e7ec28e10000000a114084/content.htm
are the best.

Wireless Product selection and design

My client house is too big & there are 4 floors avaiable & out side garden is also available.
I have checked & there is no any feasibility to lay the Lan cable for connect the AP.
our requirement is signal strenth should be proper in floor area as well as garden area.
Could any one can help or suggest the model to us that any cisco wireless AP/signal Boster is available or not?
regards,
rajat

You'll need to look into MESH access points like the 1550.

Design and Sizing Document for CUCM 8.x

HI Team,
Guys i need Sizing and Design Document for CUCM 8.x.
There is a new client and we need to do the sizing and design for that client on CUCM 8.x platform.
Request you to assist me with document. I need a document which will give me the sizing and design viewpoints.
I am sure there would so many guys who would have done this already.
Awaiting your reply asap.
Rgds,
JF

Cisco Unified Communications System 8.x SRND
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/uc8x.html
HTHjavaIf this helps, please ratewww.cisco.com/go/pdihelpdesk

Yosemite: An open letter to Apple Development and Design Teams

Respectfully, is it possible that your teams would reconsider the design choices that were developed for Yosemite? (Mavericks was lovely.) After installing Yosemite, I personally found the revised design elements to be overwhelmingly unappealing -- partially because the icons and overall color scheme are disruptive to the eye.
A bit of research in your support communities confirms that there is a pervasive sense of dissatisfaction with the look of Yosemite. Apple interfaces have been so beautiful until now… what has happened to the lovely polished Apple that we have all have come to love? Historically, Apple's most devoted base is made up of hi-end creative professionals and extremely design-savvy consumers. Yosemite just looks (I'm so sorry) like someone without any sense of your branding or identity took over. Woefully unsophisticated. The proportions are off. The elegant, but subtle, sense of depth is gone. It's gone flat altogether, but not in a good way.
There are oversights in the functionality, too. At first glance, the powerful color labeling feature for files has been all but destroyed. In my work, I depended on that feature every day. Managing 22,000+ image and design documents for one client is no easy task, even with Bridge. So I truly depended on Apple's color labeling to help me do my job more efficiently -- but now it seems I will have to look really hard for a tiny colored circle which may (or may not) be concealed by its filename if the browser columns are too narrow. Whoever designed Yosemite clearly does not use color labels as an organizational tool. I am so sad about the labels… .
Whatever has happened, old friend?! Would you please consider restoring Apple's fine features of design and function?

Thank you for the link, 213JB. It takes me right back to this community. Hopefully, the Apple teams will find it here.
Have a great evening.

Calling all LV Architects and Developers: advice required on Build Specifications and Requirements

This is a call to all contractors, consultants, architects etc...
I have been asked to develop and automated test system...
Long story short - can anyone offer me an example or two or copy of a specification and requirements document given to them by a company that is in need of a labview system, which specifies what it needs to do, what it should look like, how the data should be stored etc...
The reason I ask is that I have not been given any spec. And trying to build a system without one is non-sensicle to me. I am fairly new to labview as well.
The way I see it is that if a job goes out to tender for quotes from different contractors, surely there must be some kind of spec document so that they can give their quotes and understand how to build the system from the ground up and plan ahead.
maybe it should include things like:
Including:
Types of tests
Things to be tested
Who will be using it? Testers/engineers/analysts?
Who will maintain it? What skills do they have?
What should it look like? Colours, menu’s test result feedback format(s)…
What features and functions do they want?
How much test modification control does it need?
Please feel free to add to this list
Hope you can help/advise. all comments welcome.. Thanks all

Let's get some things straight first:
There are no companies in the world in need of "LabVIEW system". There are companies in need of automated test systems, for which LabVIEW is suitable choice. But this choice is mostly made by you, not by the client. If client explicitly asked you to do it in LabVIEW, he's still in need of test system, but one of the additional requirements might be LabVIEW ("We're standarized for NI hardware" or "Mr. Smith here knows LV, so you'll sell us codes and he'll be able to modify them", etc).
Specifications given by clients are rare. In-depth specifications are unicorns. Most clients would just give you "hey, we want to measure this and check that". And that's just ok - they're not experts in automated test systems, you are. They're just their domain experts. That makes YOU responsible to gather requirements for their test system by cooperating with them. If they knew what exactly is needed to archieve their goals, they'd just do it without your help (or hire you as mindless coder).
No one would probably just give you any specification here. At best such specification is company know-how, but most common it's just proprietary information.
Requirements gathering is hard. Mainly because they're changing. And there are no silver bullets, no "template documentation" which you can just fill and everything would be clear.
Now, adding to your questions list:
What do we automate? Why? What do we want to archieve?
What will be measured? How? What are specifications of measurements (sampling rate, accuracy, etc)? What hardware do we need?
What are the use cases for the system? (you can look up "use case" in internets; this is also closely connected to "Who will be using it?)
How we'll decide that the system is complete and working (Will we have some functionality check list? Is there any calibration required? Do they have any procedures - MSA, etc? Should we provide training?)
Would it be easier if you'd make some demo to show?
...and that's just the top of the ice berg

Hi I am trying to change the margins and layout of an existing in design document, help!

Hi I am trying to change the margins and layout of an existing in design document, help!

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

Old SD and MM documents shall be deleted on productive server

We have the situation that the same SD and MM documents sitting on two different productive servers. This is caused due to the migration from 4.0B to 4.7 some years ago. Some of our companies were kept on 4.0B with SD and MM enviroment on a separate server and the other companies were transfered to a new server. At that ttime the new server was build as copy from the old 4.0B server and then migrated.
For the migration to ERP6.0 we like to clean up the current productive server. During the preparation we noticed that the old SD and MM documents don't fit into the new management requirements. Therefore we woudl like to get rid of it. Problem is that we will not archive these documents. Furthermore there a lot of open purchase and sales orders that can't be closed.
Question: Does anybody have a solution how we can delete all of these SD and MM documents before we migrate the server to ERP6.0?
Thanks

I would use the System Landscape Optimization service for that purpose, they can provide you with tools to do those "merging" of two systems.
http://service.sap.com/slo
(It´s consulting - so $$$).
Markus

Can I download Adobe Creative Suite 5.5 Design Premium on a new Mac if I've had it installed on my old one since December 2011? I have the product key and serial number.

I bought a new Macbook Pro 13 inch in December 2011 and I bought the Adobe Creative Suite 5.5 Design Premium shortly after and installed it on the computer. The other day my friend spilled his drink on my computer and it is now going to cost me $800 to get it fixed so I am considering getting a new one instead of getting mine fixed I'm not sure if the memory is still ok or not either. It didn't get that wet and Apple told me it is more than likely ok but there is no guarantee that they are going to keep the memory when they fix it. So I was wondering if I get a new one if I can install the Suite on the new one I still have the product key and serial number for the Suite. Or if I decide to get mine fixed and the memory is swept, then can I reinstall it on mine after it is fixed? If anyone can help me it would be greatly appreciated!!! Thank You

deactivate your installation on your old computer (help>deactivate).
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Anyone around here with an apple developer program membership who lives in the us and wants to participate in entering the atari indie developer challenge for pong? I have the great idea required, ample coding skills and a completed game design document.

If you have a membership with the apple developer community or know anyone who has and also resides within the united states, please contact.
The purpose is to partake in http://www.atari.com/pongdeveloperchallenge
The initial game design document is fully completed and the ideas expressed in it are more than strong enough to compete for the top prizes.
I'm well versed in different programming languages (c, scheme, js, assembly, python,...) as well as being a proficient sound designer and musician and a skilled graphics and animation manipulator myself. Assistance with the actual development would appreciated but is not really necessary.
Winnings and proceedings arising from participation would distributed most fairly. If you know anyone besides yourself that is able to help out, you would also be rewarded financially from an ensuing victory.
Reply to this post, pm or send a gmail to aelgoa
Have a good one
Marnix

If you have a membership with the apple developer community or know anyone who has and also resides within the united states, please contact.
The purpose is to partake in http://www.atari.com/pongdeveloperchallenge
The initial game design document is fully completed and the ideas expressed in it are more than strong enough to compete for the top prizes.
I'm well versed in different programming languages (c, scheme, js, assembly, python,...) as well as being a proficient sound designer and musician and a skilled graphics and animation manipulator myself. Assistance with the actual development would appreciated but is not really necessary.
Winnings and proceedings arising from participation would distributed most fairly. If you know anyone besides yourself that is able to help out, you would also be rewarded financially from an ensuing victory.
Reply to this post, pm or send a gmail to aelgoa
Have a good one
Marnix

Hello, I own a license for Adobe CS5 Production Premium and Adobe CS4 Design Premium for Windows/PC. I am switching to an OSX/MAC system. Is it possible to transfer my licenses to the new platform?

Hello, I own a license for Adobe CS5 Production Premium and Adobe CS4 Design Premium for Windows/PC. I am switching to an OSX/MAC system. Is it possible to transfer my licenses to the new platform?

It's possible to transfer licenses but it must be done by contacting a Customer Service representative by phone or web chat. They'll probably have you submit a form.
Contact Customer Care

I am wanting to add picture and designs to my form how do I place it in a specific place on my form?

I am wanting to add picture and designs to my form how do I place it in a specific place on my form?

Currently we only support one field/item on a line. We are working on adding a feature that allows you to put multiple fields/items on a single line. We hope to have that out in a few months.
Randy

Design document and flow chart ofr procedures

for every pdocedure and fumctions we have to maintain design document and flow chart for taht procedure.
i need one sample design document and flow chart

http://www.lmgtfy.com/?q=design+document+flow+chart

Notification on Receipt and Purchase documents getting fired on Production order having Items with planning method as MRP

I have written a SP Notification to block adding of documents if block number is not provided. Notification is working fine on Purchase and Receipt documents. This notification also gets executed on Production Order where items included in Production order have planning method as MRP.
Can anyone explain me the relationship between
"MRP planned items"
and
"Purchase documents (Purchase Order; GRPO; Purchase Return; AP Invoice and Credit Memo) and Receipt of Production."
Thanks & Regards
Sonil Bhardwaj

Hi Sonil,
Can you post your SP , to look if there is any problem with SP ..
Regards

I lost my disk for cs5 creative suite 5.5 design premium but I have product code and a new computer I want to reinstall. What can I do?

I lost my disk for cs5 creative suite 5.5 design premium but I have product code and a new computer I want to reinstall. What can I do?

You can download the software from the website and then type in your old serial number to activate it... that is, IF the installer database will work with your operating system. I am having problems reinstalling CS4 with a new computer running on Win 8.1. When I called customer support, they told me a whole lot of nothing for 45 minutes and then directed me to a chat session. After about 30 minutes on chat, I was basically told they don't offer support for older products. The website says "no known issues" for installation... but that very well may be because they are unwilling to record the issues when someone calls to report them! Good luck with your install. I wish I had CS5 at this point, as it appears there is still support available for it... but you are on the bubble timewise for that to continue. Other downloads

Product Specification and Design Documents

Similar Messages

Maybe you are looking for