Product transfer from SRM to CCM 2.0

Hi All,
can you advice, where can be a problem? When we run report BBP_CCM_TRANSFER_CATALOG. Catalog "SRM_EXTRACTED_CTLG" was created, but without schema and products in the catalog.
There is no any error message in SXMB_MONI.
EBP 5.0 and CCM 2.0 are on the same client. In XI we use scenario MasterDataInclusionInCatalogOnWAS700. Inbound message inteface is CatalogUpdateNotification_In in namespace http://sap.com/xi/CCM/CAT. The Outbound message is CatalogUpdateNotification_Out in namespace http://sap.com/xi/EBP. There is no standard mapping for this scenario, so I suppose, that the mapping is not necessary. Am I right?
Does anybody have any idea, where the problem can be or how to find it out or test it, when there is no error message.
Thanks for help
Dusan

Hi Jason,
in message you can find payloads. Payload is with data Payload_1 without data. It depends what kind of check button was chosen, P_DEBUG or Initial transport by report BBP_CCM_TRANSFER_CATALOG.
Thanks a lot for your help.
Regards,
Roman

Similar Messages

Problem in replicating the material from SRM to CCM

Hi SRM gurus
We have material created in ECC6 and replicated to SRM, but the same material is not being replicated to CCM. Back ground job for program BBP_CCM_TRANSFER_CATALOG is running.
we are on SRM 5.0, Extended calssic scenario.

Hi
Which CCM version are you using ? What steps are you doing ?
CatalogUpdateNotification_Out is configuration on XI for the location of the XI server.
When you run report BBP_CCM_TRANSFER_CATALOG this sends the materials to the XI server, when then sends that back to the CCM instalation (on our system this is the same client/box as the SRM application). Once there the catalog can be published through the authoring tool to the respective catalog, or a report could run to send this out.
I would suggest looking at the config guide for CCM2 - it goes through what you need step by step. Incase you don't have the same, i can email at your mail id, if any.
Please go through the SAP OSS Notes and links below, which will definitely help ->
Note 979079 Increases waiting time during SRM catalog transfer
Note 904757 Further performance improvement of BBP_CCM_TRANSFER_CATALOG
Note 874874 To improve performance of "BBP_CCM_TRANSFER_CATALOG"
Helpful links ->
Re: Material/service master catalog upload (ECC-CCM)
CCM SRM product catalog
Re: How to load materials, contract lines & info recs directly from R/3 to CCM
BBP_CCM_TRANSFER_CATALOG (product catalog)
Re: Product ID format settiings in R/3, EBP and CCM?
Re: Uploading Product Data from SRM to CCM?
Do let me know.
Regards
- Atul

Products from SRM to CCM

HI, ALL
while I do the case about the products in SRM transfer to CCM. (they are not one client) , I configured the XI according to the cook-book. then I run the repport BBP_CCM_TRANSFER_CATALOG in SRM by SE38. after running , the log show everything is OK. but , i cann't find the SRM catalog and datas in CCM. why?
Thanks!!!
kind regards
Jesse

Jesse,
Please make sure that XI connection is active and Service Users have valid accounts.
Please check also the threads below:
http://help.sap.com/saphelp_srm50/helpdata/en/42/151D4193BB73ADE10000000A114B54/content.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/151D3893BB73ADE10000000A114B54/content.htm
BBP_CCM_TRANSFER_CATALOG (product catalog)
Re: Material/service master catalog upload (ECC-CCM)
Re: Map to Procurement Catalog
Re: Short, long Description not showing up when loading Catalogs
transfering product master from EBP to CCM
Re: XI for CCM 2.0 and EBP 5.0 (SRM 4.0)
CCM SRM product catalog
Re: CCM help
extra characteristics in SRM product Catalog
product master transfer from EBP to CCM
CCM2.0 Config in NW2004s (PI7.0) u0096 XI Error
replicating product master from EBP to CCM using XI.
Re: How to load materials, contract lines & info recs directly from R/3 to CCM
Please award points if helpful..

Product Contract and supplier data transfer from SRM to SAP XI

Dear MDM Guru's
I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
Please help.
Regards
Jacob

HI Jacob,
I believe below documents will give you the information which you are looking.
[SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
[SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
[SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
Please revert if you still get any question, after going though these documents..
- Shiv

Transferring Product Data from SRM 7.0 to SRM-MDM 3.0

Dear SRM-MDM experts,
We are running the program BBP_CCM_TRANSFER_CATALOG to transfer product data from SRM 7 to SRM-MDM 3.0 The question we have is after running the program, where do we find the file the XML file which the program has generated so we can see the results? SLG1 just shows how many products were processed. We need to see the list of the products generated.
Thanks and regards
Pedzi

Hi Pedzi,
You can find the generated XML file in MDM server. Here is the path to get the Product Data XML file.
C:/usr/sap/SRD\MDS00/mdm/distributions/MDD_ORCL/REPOSITORYNAME/Inbound/SRM/_MDMProductDataTransmission/Archive
Thanks,
Anshuk Saxena

Replicating Products/Catalog from SRM to MDM

I am implimenting SRM and MDM on 7.1 and SRM-MDM Catalog 3.0
I wanted to replicate catalog data from SRM. As we know each catalog record in MDM contains Product, Supplier, Info record data. I am not sure if we have to map all these in MDM or It will be mapped by SAP delivered content for replication.
I am using BBP_CCM_TRANSFER transaction in SRM to transfer data to MDM. In the selection screen I am using 'Category Hierarchy', Category ID and Language fields. I did unchek/check Force Intial Transport and P_debug. There was not much difference.
However I am getting following info messages, but unable to see any data in MDM
16.06.2010 09:27:41: Initial transfer for catalog SRM_EXTRACTED_CTLG
16.06.2010 09:27:42: Determine category TELEPHONE (5 products)
16.06.2010 09:27:42: Start of catalog transfer for 1
16.06.2010 09:27:42: catalog transfer ended
I am now stuck here. Can any one share details of the replication process and steps involved.

Hi Sudha,
Please explain your business scenario. What data you want to replicate from SRM to MDM. We can replicate Suppliers, Contracts and Product Master from SRM to MDM through XI. Make sure you hae configured XI settings for that. You have to download the pre-delivered XI content from SAP Markeplace. Please check Note # 1177779 & 1177780 regarding that.
We can use following reports in SRM to replicate following data in MDM
BBP_CCM_Transfer_Catalog-----Product master
ROS_SUPPLIER_SEND_TO_CATALOG-----Supplier data
SRMMDM_CTR_Transfer----Contract data from SRM
In your case, you are running BBP_CCM_TRANSFER. Please check the SXMB_MONI t-code to monitor the XML messages whether XML files are processing correctly or getting stuck.
Thanks,
Anshuk Saxena

How do we replicate product categories from SRM/ECC in to SUS system

How do we replicate product categories from SRM/ECC in to SUS system in srm 7.0

Hi Gopal,
Are you confused between SUS & ROS? If you meant ROS, it is advised to create local product categories in ROS under COMM_HIERARCHY.
Let us know your exact requirements.
Regards,
Nikhil

Vendor data transfer from SRM to R/3.

Hi,
I create a Business partner in SRM, I need to transfer it to R/3 ????
Pls advice how to transfer the same.
regds
pavan.

Hi,
Pls see the foll thread for solution/workarounds:
Re: Self registered Bidders to be transferred to ECC
Other related threads:
Tranfer vendor data from SRM to ERP (R3 / ECC)
Vendor replication from SRM to R/3?
External Vendor replication from SRM to R/3
https://forums.sdn.sap.com/click.jspa?searchID=571462&messageID=1487382
Replication of Vendor master from SRM to backend.
BR,
Disha.

Document transfer from SRM to DMS through content server

Hi Everybody,
 In one of scenarios we need to transfer documents attached to the shopping cart line items in SRM to R/3.
 For that we followed the following procedure.
 1.In the SRM to R/3 system, the attachments are driven by the BADIs.
 2.In the BADI, if we define DMS_C1_ST as the storage category for R/3 Database, the DMS should work
 3.The existing DMS, the customized content server is Z_DMS.
 4.Using SRM (with Z_DMS)we are able to create the Document Info Record
 5.The attachments are not reflected in DMS (driven through SRM)
 6.When the attachments are added in the DMS manually, DMS works perfect
 I am thinking there might be some configuration required in content server for the conversion of original application files.
 If anybody have the solution for this please post here.
Thanks,
Rajesh.

Hi
Please refer to the links below ->
Re: Attachments in PR and PO
Re: Sending attachments from SRM to SAP Purchase Requisition
Re: Transfer SC attachment from srm 5.0 to backend R/3
Re: Attachments to backend
Re: Attachments in PR and PO
Re: URL vs. document attached in back end EBP 4.0 Classic/4.7 E
http://help.sap.com/saphelp_47x200/helpdata/en/41/648838ab4e8a11e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d6/806c39917d423ee10000000a11402f/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/9b/c2b9375e62545ce10000009b38f889/frameset.htm
Do let me know incase you still have any queries.
Regards
- Atul

Classic Scenario- Service Item custom field transfer from SRM to ECC

Hello Experts,
I was looking for a way to transfer custom fields from SRM to ECC(PR/PO) for service items.I am on SRM 7.01 and ECC 6.0 ehp 5.
The same custom fields are getting transferred for Material item using the BADI BBP_CREATE_BE_RQ_NEW.
But the same badi doesnt work for service item transfer.
I would appreciate it if someone could help me with this.
Regards,
Cruiser

You can use the Function Module SPOOL_RQ_CREATE with the parameters as bellow and debug.
REQNO = SC number
REQUIS_NUMBER = as Purchase Req no ( from backend )
IV_BE_LOGSYS = backend logical system.
System will go through the same path as SC bridging to PR.
HTH,
Chandu
Edited by: Chandrahasan H on Mar 23, 2011 3:36 PM

DMS configuration for attachement transfer from SRM to R/3

Hi,
SRM 5.0
R/3 ECC6.0
Scenario : SRM SC attachment transfer to PR in R/3
I have done the DC10 and DC 30 configuration in R3
BADI BBP_CREATE_REQ_BACK is implemented
The attachement transfer is not happening to R/3
can someone let me know the necessary DMS configuration to be done in backend system and some steps to validate the SRM configuration i have already done
Thanks
Jayesh

Hi
Please refer to the links below ->
Re: Attachments in PR and PO
Re: Sending attachments from SRM to SAP Purchase Requisition
Re: Transfer SC attachment from srm 5.0 to backend R/3
Re: Attachments to backend
Re: Attachments in PR and PO
Re: URL vs. document attached in back end EBP 4.0 Classic/4.7 E
http://help.sap.com/saphelp_47x200/helpdata/en/41/648838ab4e8a11e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d6/806c39917d423ee10000000a11402f/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/9b/c2b9375e62545ce10000009b38f889/frameset.htm
Do let me know incase you still have any queries.
Regards
- Atul

Transfering Products from SRM to CCM

Dear SRM Gurus,
I have executed the report "BBP_CCM_TRANSFER_CATALOG" in EBP. I got success messages " Catalog transferred". However in SXMB_MONI, I am getting error messages like " No implementing class registered for the interf
(ABAP interface, request message
CatalogUpdateNotification_Out, request message,
namespace http://sap.com/xi/EBP)" . I don't have any idea about this error.
Can some one guide, How can I proceed further?
Thanks & Regards,
Ramkumar

Ramkumar ,
Hi. CatalogUpdateNotification_Out is configuration on XI for the location of the XI server.
When you run report BBP_CCM_TRANSFER_CATALOG this sends the materials to the XI server, when then sends that back to the CCM instalation (on our system this is the same client/box as the SRM application). Once there the catalog can be published through the authoring tool to the respective catalog, or a report could run to send this out.
I would suggest looking at the config guide for CCM2 - it goes through what you need step by step.
Regards
Rob

Vendor text doesn't transfer from SRM PO to R/3

Good evening,
We are new in SRM SCE, we have a problem with the vendor text. In SRM appears this information and the PO is e-mailed correctly but when we review the PO in R/3 this information doesn't fill in. We don't know if the problem is in SRM or in R/3.
In BBP_PD the information, vendor text, is contained under TDID with the ITXT code. What can we review? We have take a look to some BADI (IF_EX_BBP_ECS_PO_OUT_BADI~BBP_B46B_PO_OUTBOUND) in SRM but it comes with the data blocked and we can't change their contain, concretely CS_BAPI_POITEM_EXT.
Thanks in advance,
Francisco

Which scenario are you using in SRM?
Do you have a requisition created prior to the PO on the R3 side? If so, check and see if the text is there. Then, check the configuration on the R3 side to make sure the text on the requisition is adopted to the PO. Since the shopping cart is line item level, it will appear on the line item on the PO.
Monique Stephens

Product Hierarchy from SRM 4.0 to SRM 5.0

Hello Gurus,
We are in SRM 4.0. We may move to SRM 5.0. I have some ZPRODUCTHIERARCHY in srm 4.0. How can I transfered all the ZPRODUCTHIERARCHY to SRM 5.0 . is there any standard way to do it. Any link or clue is appreciated.Scenario Standalone
Thanks
Raman

Hi
1042516 - SAP Note
Re: Vendor/Internal note text for Confirmation of PO in SRM
Internal note can be passed to R/3 PO. It is standard. check it up.
Internal note must copy to another follow on document but why it is not copying in to your backend PO.
You can try oss notes .. I will update you if i find any notes
Regards
Muthu

How to transfer Vendor from SRM to SAP R/3

Hi...
How to transfer Vendor registered in directly via self regstration in SRM to SAP r/3 system
regds
Kumar

Hello Kumar,
Please find the SAP documentation:
http://help.sap.com/saphelp_srm50/helpdata/en/b2/a298403de08368e10000000a1550b0/frameset.htm
I have not tested the functionality but as per documentation Under Business Partner Monitor transaction, you can synchronize SRM vendors with ECC vendors directly using a pushbutton Transfer Change to Backend.
Other useful threads.
Tranfer vendor data from SRM to ERP (R3 / ECC)
Vendor data transfer from SRM to R/3.
Hope this helps.
Thanks
Ashutosh

Product transfer from SRM to CCM 2.0

Similar Messages

Maybe you are looking for