Production backup failed(oracle 10g)

hi
after co location of server our production offline_force backup failed.
i also take aix os level backup in tape , tape device & tape working fine.
following detail log :
BR0278W Command output of 'LANG=C cd /oracle/AHP/sapbackup && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0.1':
BR0279W Return code from 'LANG=C cd /oracle/AHP/sapbackup && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0.1': 2
BR0359W Restore of /oracle/AHP/sapbackup/.tape.hdr0 from /dev/rmt0.1 failed due to previous errors
BR0218W Checking label on volume in device /dev/rmt0.1 failed
BR0278W Command output of 'LANG=C cd /oracle/AHP/sapbackup && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0.1':
BR0279W Return code from 'LANG=C cd /oracle/AHP/sapbackup && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0.1': 2
BR0359W Restore of /oracle/AHP/sapbackup/.tape.hdr0 from /dev/rmt0.1 failed due to previous errors
BR0218W Checking label on volume in device /dev/rmt0.1 failed
BR0260E BRBACKUP cancelled by user
regards
mohsin

It seems, that the OS can´t read the label from the tape.
Is the tape device correctly configured - can you access the tape from OS level?
Markus

Similar Messages

Hot backups in Oracle 10g R2

Hi
How to take up Hot backups (On-line backup) in Oracle 10g Release 2 in Windows environment.
Pls give me the link or steps for do the hot back-ups.
Thanks

I think you are test ENV?
Did you archive the current log file which i mentioned in the earlier post
if so and if you the archived log
Shutdown the DB
Rename the file you copied
move the D:\oradata\*.dbf(whihc was backed up by you)in the original directory and
from sqlplus issue
SQL>startup mount
SQL>recover database
this hould work
But make sure you have the backup before deleting/renaming the the file you backed up by HOTbackup

Oracle 9i backup onto Oracle 10g

Hi All,
Is it possible to restore the SAP backup taken in Oracle 9.i onto the Oracle 10g.
If possbile, can anyone share the documents for the same?
Thanks in advance,
DVRK

> You won't be able to use 9i DBFs on a 10g DB. You need to go 9i -> 9i then upgrade your "new" DB to 10g.
This is not true as stated. There is no difference in upgrading an installed 9.2 database (as shutdown, install 10.2 software and upgrade) and copying files over and doing the upgrade directly.
See (as written already)
Note 932722 - Upgrade to Oracle 10.2 during a database copy
Markus

Backup problem oracle 10g

Dear All,
I have taken backup through EXP utility in CMD prompt. the database version is Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 and EXP version is same..
but when i m importing the .dmp file to other system which also has Oracle Database 10g Enterprise Edition Release 10.2.0.3.0. but it shows " import terminated unsuccessfully" and import version is 9.1.0.5.1.
Please help me.

only.ashish99 wrote:
Dear All,
I have taken backup through EXP utility in CMD prompt. the database version is Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 and EXP version is same..exp is not a backup, it's just logical dump.
but when i m importing the .dmp file to other system which also has Oracle Database 10g Enterprise Edition Release 10.2.0.3.0. but it shows " import terminated unsuccessfully" and import version is 9.1.0.5.1. If on other system is installed 10.2.0.3, but You still see that import is using 9.1., then probably YOu have more than one ORACLE_HOME on that machine.
set correct env variables in order to use 10g ORACLE_HOME and imp utility from it.
echo $ORACLE_HOME
echo $PATH
both should return path to 10g ORACLE_HOME.

Database creation failed Oracle 10g x64

Hello,
Trying to install Oracle 10.2.0.1.0 (x64) on Windows Server 2003 SP2 (x64).
Towards end of installation, it fails at Database creation stage, stopping at 2%.
Anyone can give any clue on why it happens ???
Appreciate your help..

Thank you for your inputs..
I have tried to run DBCA , but again it fails at 2% (when database files being copied)
I have also installed 10g Release 2 (10.2.0.4) Patch Set 3 for MS Windows x64
also downloaded and installed latest Java
Still when trying to create databse, it fails at the stage of copying database files.
Thanks to share if anyone have any clue..

Database cold backup in oracle 10g

Hi,
oracle-10.2g
solaris-10
The oracle database i connected with the sun cluster 3.2(two node cluster), for taking the cold backup one of the resource(instance). When I shutdown the resource(instance) for taking the cold backup. The resource(instance) starts automatically again on the same node.
Kindly provide me the solution for taking the cold backup by shutting down the instance.
Regards
Dravidan

Here is the procedure for taking coldbackup:
First shutdown the database then copy all the datafiles, tempfiles, control files and logfiles to a safe place using the select command. Then run the script as described here: http://tinyurl.com/bp85dmj

Backup in Oracle 10g

Hi
I am using Oracle 10 EnterPrise Manager
I want to make schedule of Backup but I am unable to do it. It is asking Host Credential user name & Password
I entered user as Administrator and password for my local system
than also I am unable to do it
Kindly Provide Me solutions
Satish

Assuming Windows (<rant>Why is that 99.9 percent of all posters here can not be bothered to post exact version and platform info? </rant>)
The OS account needs to have 'logon as batch job' privilege.
Sybrand Bakker
Senior Oracle DBA

Importing compressed backup in Oracle 10g

Hi everyone,
I have to restore a dump from a compressed file with .exp as extension on Windows OS.
After searching the web, there were more import samples on UNIX than on Windows.
Has anyone restored a dump from a compressed file(.exp) in Windows OS? Please help.
Oracle Version:10.1.0.4.0
OS Name & Version: Windows 2003
Thank You,
Regards,
Sunny.

user4198347 wrote:
Hi everyone,
I have to restore a dump from a compressed file with .exp as extension on Windows OS.
After searching the web, there were more import samples on UNIX than on Windows.
Has anyone restored a dump from a compressed file(.exp) in Windows OS? Please help.
Oracle Version:10.1.0.4.0
OS Name & Version: Windows 2003
Thank You,
Regards,
Sunny.As an expansion on Hemant's comments, you need to be aware (if you aren't already - I'm surprised at the number of IT "professionals" who aren't) that there is no magic in the "extension" part of a file name. There are certain conventions, but they really mean nothing as far as the actual contents (data AND format) of the file. Putting a "Corvette" nameplate on my Honda Civic doesn't make it a Corvette. Putting a ".exp" extension on some unknown file doesn't make it a compressed dump file.

How to Restore datas in Oracle 10g using hot backup?

I did Hot backup things (On-line backup) in Oracle 10g (Windows environment)
Now backup files are stored in physical location..
How to restore the datas to original location..
Can any one give the url or command for recovery in ora 10g for hot backup
Thanks

Please do not dump all of your work in this forum, and expect volunteers to do it for free!!!
Dear Great Senior DBA Sybrand Bakker
What are Oracle Discussion Forums?
Oracle Discussion Forums is an interactive community for sharing information, questions, and comments about Oracle products and related technologies. Most forums are moderated by product managers, and all of them are frequently visited by knowledgeable users from the community
oracle forums is not your place for showing “bossing” it is a place where junior to seniors share there knowledge and advices, it means helping and sharing….. Knowledge is for giving ….giving only it will increase… don’t discourage any one like this ……
There are my Great Seniors (not like u) mainly respected Mr. Jonathan Lewis, Mr. Don Burleson and a lot of oracle nominated ACE members are all giving patiently replay to jr. to sr.
Obeasley oracle doubts are mostly related to practical issue only……
Pls try to learn the word meaning of “volunteers”

Oracle 10g Real Time Backup

Hi
My company need to set database real time backup for Oracle 10g release 2 (Standard Edition).
I see in Oracle Database 10g Product Family [Oracle Database 10g Product Family|http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf] not support the Data Guard.
Can I do it in Oracle 10g SE ?
Thanks in advance

hi,
trouble is the cost of EE can be quite expensive
another way of creating a psuedo (hope I spelt that correctly) dataguard would be to script a method of shipping archive files to a DR server.
Live System
=========
             BEGIN
          IF ORACLE ONLINE THEN
                        SWITCH LOG;
                   END IF;
                   IF ANOTHER INSTANCE OF SCRIPT RUNNING (LOCAL OR REMOTE) THEN
                             ERROR;
                             EXIT;
                   END IF;
          IF (STANDBY NOT ONLINE) THEN
                          ERROR;
                          SEND EMAIL;
                          EXIT;
                   END IF;
                   GET LAST SHIPPED LOG FILE TIMESTAMP FROM THE REMOTE SITE OR FROM LOCAL SERVER;
                    WHILE LOG > SHIPPED LOG FILE TIMESTAMP DO
                              TRANSFER LOG FILE TO REMOTE SITE;
                              DO CHECKSUM ON LOG FILES;
                              IF NOT MATCH THEN
                                     RETRY TRANSFER;
                                     IF FAILURE 3 TIME THEN
                                           ERROR;
                                           SEND EMAIL;
                                     END IF;
                      END IF;
                              ' GOT THIS FAR SO ALL IS OK
                              MARK THE LOG FILE AS TRANSFERRED;
                    WEND;
DR System
========
          BEGIN
               CREATE A LOCK SEMAPHORE;        - Only one instance allowed
                             CHECK LAST APPLIED LOG FILE;
               IF CONNECTION TO LIVE SERVER OK THEN
                                     CHECKSUM NEXT LOG FILE WITH LIVE SYSTEM;
                                     IF CHECKSUM NOT SAME THEN
                                              IF LOG FILE ON ITS WAY FROM LIVE THEN
                                                       EXIT;
                                              END IF;
                                              WHILE LOGFILE EXISTS DO
                                                        GET NEXT LOG FILE FROM LIVE;
                                              WEND;
                                     END IF;
                             ELSE
                                     ' Extra work
                                     APPLY NEXT LOG FILE
                             END IF;
               APPLY LOG FILES;
                             WORKOUT NO OF LOG FILE APPLIED;
                             KEEP SPECIFIED PERCENTAGE LOG FILES;
                             DELETE EXTRA LOG FILES;
                             TRANSFER LAST APPLIED LOG FILE ATTRIBUTES TO LIVE SERVER;
                             EXIT;
                     END;       I cannot give you the actual code that I have as there are some more bits that I have added for our client but what it does is give you an over view of the process involved for creating a pseudo DG environment.
regards
Alan

Oracle 10g - Date format in SELECT query for CFOUTPUT

Hello, everyone.
The project that I am working on in the dev environment is connected to an Oracle 11g database, but the production side is Oracle 10g.
I have a page that is erroring in production (but not development) when it gets to a date that it needs to display.
A co-worker mentioned that, in 10g, if a date/time is being SELECTed, you have to put it in to_char(), so I did that.
But it's still erroring, and I'm not getting an error message, so I'm assuming that I have an incorrect format for the date in the SELECT.
What is the proper format for SELECTing a date/time when using to_char()? Right now, I have SELECT to_char(create_date,'MM-DD-YYYY HH:MI') FROM tableA . Is this not correct for CF to output?
Thank you,
^_^

Please see my original post ("I have a page erroring in production (but not in development) when it gets to a date that it needs to display.") Sorry if it came across as vague. It made sense, to me, when I typed it. But, then, I'm usually typing fast just to get the question out there, when I'm in a hurry.
Haven't done a CFDUMP, yet, as every time I make a change in development that needs to be tested in production, I have to notify my supervisor that there are files that need to be copied into production, which can sometimes take a while, so I try to do troubleshooting on dev side - it's a pain in the you-know-what, but that's the kind of environment I'm working in.
As it turns out, changing the format in the SELECT to_char() did the trick. If anyone else has this issue with Oracle 10g, I'm now using SELECT to_char(create_date,'YYYY/MM/DD HH:MI') FROM tableA, and now the CFOUTPUT is processing the whole page. I guess the MM-DD-YYYY threw CF into a tizzy, breaking the process?
Anyhoo, it's working, now. Thank you, Dan and Adam, for your thoughts on this.
^_^

How to include Date for backup of Oracle in a script !!! LINUX

hi,
I need to add date & time for the backup of Oracle 10g on OEL 5 32 bit.
and also how do I get an email when Rman finishes its job
Thanks in advanced.

user584721 wrote:
Thanks for the update..
I am using a script called full_dpbackup.sh which contain the following ...
expdp system/oracle schemas=scott directory=test_dir dumpfile=scott.dmp logfile=expdpscott.log mpencryption=all encryption_password=scott reuse_dumpfiles=y compression=all
I need to include the date & time in this script.
Thanks in advanced.That's not a backup, it's an export.
I don't have my linux system handy to debug, but what you want would be something like:
expdp ..... dumpfile=exp_`date`.logThe reverse single quote (I don't know the official term, but it's the character just to the left of the one/exclamation on a US keyboard) tells the shell to substitute the value returned by the command enclosed by the marks. In the example above, it would substitute the value returned by the "date" command. That command has many, many arguments to control the format of what is returned. Look them up an any good nix reference, or just "man date". (As for any good nix reference, you should at a minimum have a copy of "Unix In A Nutshell" on your desk.)

Oracle 10g Enterprise Manager

I recently upgraded one of my production databases to Oracle 10g from 9i. Everything was working perfectly. Now when I try to launch Enterprise manager I get "Server Error: Can't connect because of networking problems". I tried to stop and start the dbconsole but I'm getting an "OC4J Configuration Issue" error. The database fine.
Has anyone seen this before?
My server OS is RedHat Enterprise Linux 3.

I fixed same problem running:
$ export ORACLE_SID=Oracle
$ emca
Leonid M.

Oracle 10g/11g database use on UEK versus Red Hat kernel? How widely used?

Greetings
is there any official or semi-official information regarding how widely used is Oracle UEK to run Oracle 10g/11g database (RAC or single-node) versus running Oracle database on Red Hat Linux or on Oracle Linux with Red Hat kernel ?
I am asking because at my customer site there is a perception that Red Hat (or Oracle Linux with Red Hat kernel) is much more widely used in production to run Oracle 10g/11g database and therefore it will provide better stability even if the performance may be somewhat reduced compared to Oracle UEK option.
So I need some sort of approximate percentage numbers of how well is UEK used in Linux Oracle community to run Oracle 10g/11g databases.
Many thanks.
Yuri B

The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. Well, in my opinion, a higher market share does not reflect the quality or reliability of a product. Take MS Windows for example. Unfortunately, the reason for success is often not due to knowledge and experience, but rather due to fear and sheep effect or herd behavior.
Perhaps you can use other arguments or questions to help you to make a decision, eg.:
Oracle has a better understanding of what Oracle products require than Red Hat.
Oracle takes full responsibility for the OS and Database, no finger pointing.
Oracle tries to provide a better product than the RHEL kernel.
The Oracle UEK kernel contains Oracle driver software, not available for RHEL 6 or later.
Oracle updates are free of charge, RHEL requires a subscription.
Oracle as a company is about 20 times bigger than Red Hat.
There can be reasons that require the use of the original RHEL kernel, for instance if the vendor of a specific driver for your hardware demands it. But otherwise...

Installing ABAP 6.40 SR 1 on Oracle 10g

Good Day,
I will like to install SAP 4.7 Enterprise using kernel 6.40 on Oracle 10g. I have successfuly gone to Oracle 10g via the upgrade process by
a) Installing Oracle 9.2.x upto patchset 9.2.0.7
b) Then upgrade to Oracle 10g patchset 10.2.0.2
I have already downloaded Oracle 10g DVD's (five of them)
Our production system is Oracle 10g, I will like to refresh QAS to Oracle 10g, so I am just enquring whether a direct install to Oracle 10g is possible, and then perfrom a restore.
If it is possible, please direct me to the CORRECT installing guide and DVD's.
Thanks,
Regards,
VKM...

> a) I want to build my QAS server from scratch with Oracle 10g installation. The version of SAP is 4.7 Enterprise Ext 110, with 6.40 kernel.
For this you either need
- an Oracle 9.2.0 client (949116 - Oracle 10g Support on Windows: 6.40-Based SAP Systems)
- or exchange during the database creation the kernel 6.40 with 6.40_EX2 so you don't need the 9.2 client but you use the 10.2 client.
> After this then I want to restore from production which is already Oracle 10g.
Why first installing the system and then restoring? This can be done in one step with the system copy procedure.
> b) The DVD I am using is Master "Installation_Master_6.20_6.40_07_07"
I would recommend downloading the newest installation Master CD.
> c) During the installation under section "Database Server and Client"
>
> The option to choose is available for Server "102 or 920", but only "920" appears for Client.
Yes - because at that time there was no kernel which uses the Oracle 10.2 client. That is desribed in above note.
> When I reach the screen that asks for
>
> "RDBMS Client Oracle 920" it is looking for a label
> ORACLE:9.2.0.7:CLRDBMS:. which I don't have and can't seem to find on "SAP Service Market place".
>
> N.B All the software (SAP & Oracle) for the installation was downloaded from ServiceMarketPlace
See above
Markus

Production backup failed(oracle 10g)

Similar Messages

Maybe you are looking for