Production database server fails to boot

I Have a sparc 64 Solaris 10 Sun server T5220, which I had to reboot today due to power outage and ever since it has failed to start up. It gets as far as the banner and that's it. There is no ok prompt for the light out management thingy or shell prompt. I'm using a Linux terminal connected to the serial port to access the server.
APart from a flashing green power light on the server front nothing else is happening. I believe it may be a San issue but have no way of knowing as I can' t access the Hitachi storage array web front end. I'm desperate for some advice and will be most gratefull for any pointers.

As Yingkuan stated, this is not an Oracle related issue, but an OS issue. I suggest you to contact your OS administrator or your OS support services to solve this issue.
If the memory bank got corrupted, then most probably this was due to a shortcut or a voltage peak that may have affected not only memory but also other hardware areas, which would most probably lead you to an unstable hardware. It is difficult to diagnose, it could be also that the memory banks were deffective from origin.
~ Madrid
http://hrivera99.blogspot.com

Similar Messages

SQL Server Reporting Services installed on a production database server used to support JD Edwards EnterpriseOne. What performance isses can arise

SQL Server Reporting Services installed on a production database server used to support JD Edwards EnterpriseOne. What performance isses can arise. Is it recommended. What are the pros and cons

Hi hazelannc,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated. Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

IS VMWARE Certified to run Production database Server in Production.

I got this doc in Metalink but if you have any supporting doc i would appreciate , i dont need this in production.
Support Position for Oracle Products Running on VMware Virtualized Environments [ID 249212.1]

user12004979 wrote:
I got this doc in Metalink but if you have any supporting doc i would appreciate , i dont need this in production.
Support Position for Oracle Products Running on VMware Virtualized Environments [ID 249212.1]"A production database server in production"
As opposed to a production database server NOT in production? ;-)
There has been a lot of discussion on that MetaLink note. My oracle rep explained to me that they will support you, but if push comes to shove, you may have to prove to them that the issue being worked on a given SR can be reproduced outside of the VMware environment. Actually, I think that is pretty well stated as such in the note. They won't tell you to jump in a lake as soon as they hear "VMware", but there may come a point where you have to prove that the problem is NOT related to VMware.
I can state for a fact that some of Oracle's largest customers are running under VMware and currently moving more of their stuff in that direction.

Production database server process

Hello all,
Oracle 11g default server process is dedicated
select distinct server from v$session;
dedicated
Which server process is used in the oracle 11g Production? if the database is connect to an online application?
Thanks to all

977962 wrote:
Hello all,
Oracle 11g default server process is dedicated
select distinct server from v$session;
dedicated
Which server process is used in the oracle 11g Production? if the database is connect to an online application?Question doesn't make sense! All the processes are used whenever you are going to be having the database up and running. There is nothing like production database difference which is going to make any difference in the working. For the client's connection to get established, it would be the listener process.
Aman....

JSL server fails to boot

Hi group,
I'm wondering if anybody has ever seen this error message
before and what was the fix?
230132.mcg1m3!JSL.22318: JOLT_CAT:1076: ERROR: Failed to
create to shared memory for listener table, errno = 22
230132.mcg1m3!JSL.22318: LIBTUX_CAT:250: ERROR: tpsvrinit()
failed
230132.mcg1m3!tmboot.22307: CMDTUX_CAT:825: ERROR: Process
JSL at orm.arca.mcg1m3 failed with /T tperrno (TPEOS - operating
system error)
According to Uunix.h, errno=22 is a 'write system call' error.
This is extremely weird problem -- I guess it has
something to do with IPC, but unfortunately I cannot experiment
with that box too much -- we have a production Tuxedo application
running on the box.
On the other hand, I compared the IPC resources configuration
to another machine that has no problems running JSL and they
look exactly the same. So, I am a little bit confused --
maybe it's NOT an IPC problem...
By the way, WSL behaves in exactly the same manner -- it fails
to boot with the same error.
Does anybody have any idea on what the problem could be?
Really appreciate your help
Andrei

Joe,
Thanks for your help.
I wish it was that easy. The UBB config file has all the
necessary entries for MAXACCESSERS and MAXWSCLIENTS and
IPC resources on the machine are all crancked up to the
max. So it is something more misterious than just UBB config.
Anyway, thanks a lot for your input. I'm going to keep
looking into it...
Andrew
"Joe Gavan" <[email protected]> wrote:
>
Andrei,
Have you a value set for MAXWSCLIENTS in your ubb config?
RESOURCES Section and MACHINES Section
The MAXWSCLIENTS parameter can be specified in the MACHINES section of
the configuration
file to apply to specific machines.
MAXWSCLIENTS is the only parameter that has special significance for
Workstation.
If MAXWSCLIENTS is not specified, the default is 0.
MAXWSCLIENTS
The MAXWSCLIENTS parameter tells the BEA TUXEDO system, at boot time,
how many
accesser slots to reserve exclusively for workstation clients. For native
clients,
each accesser slot requires one semaphore. However, the Workstation handler
process
(executing on the native platform on behalf of workstation clients) multiplexes
Workstation client accesses through a single accesser slot, and therefore
requires
only one semaphore.
This points out an additional benefit of the Workstation extension. By
putting
more clients out on workstations and off the native platform, an application
reduces
its IPC resource requirements. To repeat, although MAXWSCLIENTS is optional,
if
not specified, the default is 0.
MAXWSCLIENTS takes its specified number of accesser slots from the total
set in
MAXACCESSERS. This is important to remember when specifying MAXWSCLIENTS;
enough
slots must be left to accommodate native clients as well as servers.
If you specify
a value for MAXWSCLIENTS greater than MAXACCESSERS, native clients and
servers
will fail at tpinit() time.
Joe

Brand new Thinkstation D10 server fails to boot, no beeps or screen display

This server had been working fine for several weeks and today I needed to reboot it. It has been rebooted several times before so so I wasn't trying something new. I hit the Vista Start button and it immediately shut down. I couldn't recall if Vista prompts you to Stand-by/restart/shutdown but I think it does - this time it didn't. :/ Afterwards, it would not boot.
I tried:
Unplugging and replugging it in: it then attempted to boot but shut itself down again after about 30s.
a Power Supply Reset
Reseating the memory cards
Removing one of the 4GB memory cards
Trying the other memory card
Swapping the two memory cards
Inserting a bootable disk (it never gets to the point of reading anything although the drive spins up)
Checking that everything in the system board was plugged in
Making sure none of the wires were hitting anything else (shorting out)
When replacing that annoying cover from over the memory cards, made sure again I was not pinching any wires
The server does not beep and the (directly connected) monitor never comes alive to display anything when I attempt to reboot.
Per the docs, I observed the power supply Diagnostic LEDs and front panel Power LED while attempting to boot and only the green Diagnostic LED on the power supply is ever activated. The table indicated this means replace the system board.
Aack!
Before I head for the support # and an eventual shipment back to Lenovo, would it be worth my while to try and replace the CMOS battery? Or would a failure of that battery still have resulted in some indication of the problem (beeping and/or screen display)? Can anyone think of something else to check?
Just thought I'd ask around before assuming that I'm stuck with the system board diagnosis).
Thanks

The list of things that will make a computer power down on it's own before it can ever get into the OS or initiate a video feed is a short list.
A CPU thermal trip usually occurs within 30 seconds. This can be cause by a loose or improperly seated heat sink or a failure in the thermal grease coverage. If your D10 arrived with one CPU and you recently installed a second CPU, try taking the second CPU out. Should this work, verify the second CPU is the exact match to the first CPU and that the thermal grease is properly applied to the heat sink and the heat sink is securely mounted.
Ambient temperature thermal trip usually takes longer, but can be significantly shorten if the air baffle for the memory is not installed. Computers with high Front Side Bus frequencies result in memory DIMMS that get very hot.
DC power trip. This can happen if too much power is being drawn through any of the PCI ports or through the power supply itself.
When you are using a highend video card, check to see if the video card has it's own power connector(a small six lead box). If it does, there is a power connector, from the power supply, to plug into it. Without that power plugged in, the video card may appear to hum, and the it will draw too much power through the PCI slot.
Should you have added any additional PCI adapters, try removing these for a test. If that works, add one card back in at a time to isolate the offending PCI card.
Disconnect any USB or Firewire devices you may have attached, including the mouse and keyboard. If it comes back up and you have video, power down and reconnect the keyboard and mouse only and try again.
If you have the memory card reader option and kids, check to make certain no one has inserted something into the memory card readers. My kid inserted a quarter into one of the slots on my reader. My workstation powered down pretty fast. Consider moving the workstation to higher ground.
Last by not least, disconnect any additional optical drives you may have added. Some SATA devices have both the standard PC power connector and the SATA power connector. Do not connect both of these power sources to the same drive. The drive will be damaged and your computer will not stay powered on for very long.
Should this all fail to resolve the issue, contact Lenovo support. To make your support experience faster and more pleasurable, send them this list of things you tried. If this list of possible fixes fails, it's probably a power supply or system board issue, and I would start with the power supply.
If an electronic device has a defect it will fail within the first 90 days. Once you get it past the first 90 days, it is generally good for years.
I hope this helps!!!
Digitaloz

-R illegal option,server fails to boot up

Hello Everyone,
"/app/ond34/sit/bin/YM3323.tuxsv" SRVGRP=YM3323 SRVID=1
MIN=1 MAX=1
CLOPT="-A -o /var/app/logs/ond34/sit/LYM3323/stdout -e /var/app/logs/ond34/sit/LYM3323/stderr -r -- -d vodp1 -v -s QSPACE -R"
ENVFILE="/app/ond34/sit/env/YM3323.env"
This statement gives an error in Tuxedo Release 10 while booting up.
But the below one does not.
"/app/ond34/sit/bin/YM3321.tuxsv" SRVGRP=YM3321 SRVID=1
MIN=1 MAX=2
CLOPT="-A -o /var/app/logs/ond34/sit/LYM3321/stdout -e /var/app/logs/ond34/sit/LYM3321/stderr -r -- -d vodp1 -v -s QSPACE"
ENVFILE="/app/ond34/sit/env/YM3321.env"
I know ablout the options -A,-o,-e,-r
What are these options -d,-v,-s and -R??
Can anyone pls explain this ?
FYI,
Both servers boots up properly in Tuxedo 8.
We are currently facing the problem while moving them to Tuxedo 10.
Regards,
Deb

The CLOPT parameters after the "--" are user defined arguments. See http://docs.oracle.com/cd/E13161_01/tuxedo/docs10gr3/rf5/rf5.html#wp1003290
Also the server "/app/ond34/sit/bin/YM3323.tuxsv" looks like a user defined server. This looks like a custom TMQFORWARD server (http://docs.oracle.com/cd/E13161_01/tuxedo/docs10gr3/rf5/rf5.html#wp1026459) and the meaning of the CLOPT parameters "-- -d vodp1 -v -s QSPACE -R" would be in the source code for these servers.

New Windows server 2003 Hyper-V guest fails to boot

Hello,
I'm currently doing some virtualization experiments on my new server hardware. The host hardware is:
IBM x3650 M4
x2 Xeon E5-2609
32GB RAM
x2 480 GB SSDs
Server OS: Windows server 2012
I'd like to test some legacy app virtualization. I've configured a VM and have installed Windows server 2003. The install is done via DVD. The issue at hand is that after the initial installation, the server fails to boot. The VM goes into a reboot loop
and so far the only error logging I'm able to find is in the hosts event log.
Log Name: Microsoft-Windows-Hyper-V-Worker-Admin
Source: Microsoft-Windows-Hyper-V-Worker
Date: 7/8/2014 2:14:48 PM
Event ID: 18560
Task Category: None
Level: Critical
Keywords:
User: NT VIRTUAL MACHINE\A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D
Computer: CCSTS1.cnet2k.cornerstonecredit.net
Description:
'LegacyTS' was reset because an unrecoverable error occurred on a virtual processor that caused a triple fault. If the problem persists, contact Product Support. (Virtual machine ID A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>18560</EventID>
<Version>0</Version>
<Level>1</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-07-08T21:14:48.544007000Z" />
<EventRecordID>159</EventRecordID>
<Correlation />
<Execution ProcessID="1512" ThreadID="3536" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>CCSTS1.cnet2k.cornerstonecredit.net</Computer>
<Security UserID="S-1-5-83-1-2698121124-1264104059-3615998341-769460811" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>LegacyTS</VmName>
<VmId>A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D</VmId>
<Rax>0x0</Rax>
<Rbx>0x0</Rbx>
<Rcx>0x0</Rcx>
<Rdx>0x0</Rdx>
<Rsp>0x804de00c</Rsp>
<Rbp>0x0</Rbp>
<Rsi>0x0</Rsi>
<Rdi>0x0</Rdi>
<R8>0x0</R8>
<R9>0x0</R9>
<R10>0x0</R10>
<R11>0x0</R11>
<R12>0x0</R12>
<R13>0x0</R13>
<R14>0x0</R14>
<R15>0x0</R15>
<Rip>0x80547c7c</Rip>
<Rflags>0x10046</Rflags>
<FpControlStatus>7F030000000000000000000000000000</FpControlStatus>
<XmmControlStatus>0000000000000000801F0000FFFF0000</XmmControlStatus>
<Cr0>0x8001003d</Cr0>
<Cr2>0x804ddffc</Cr2>
<Cr3>0xa02000</Cr3>
<Cr4>0x20</Cr4>
<Cr8>0xf</Cr8>
<Xfem>0x1</Xfem>
<Dr0>0x0</Dr0>
<Dr1>0x0</Dr1>
<Dr2>0x0</Dr2>
<Dr3>0x0</Dr3>
<Dr6>0xffff0ff0</Dr6>
<Dr7>0x400</Dr7>
<Es>0000000000000000FFFFFFFF2300F3C0</Es>
<Cs>0000000000000000FFFFFFFF08009BC0</Cs>
<Ss>0000000000000000FFFFFFFF100093C0</Ss>
<Ds>0000000000000000FFFFFFFF2300F3C0</Ds>
<Fs>00F0DFFF00000000FF1F0000300093C0</Fs>
<Gs>0000000000000000FFFFFFFF00000000</Gs>
<Ldtr>00000000000000000000000000000000</Ldtr>
<Tr>90685580000000006800000050008B00</Tr>
<Idtr>000000000000FF0700F4038000000000</Idtr>
<Gdtr>000000000000FF0300F0038000000000</Gdtr>
<Tsc>0x148e4294</Tsc>
<ApicBase>0xfee00900</ApicBase>
<SysenterCs>0x0</SysenterCs>
<SysenterEip>0x0</SysenterEip>
<SysenterEsp>0x0</SysenterEsp>
</VmlEventLog>
</UserData>
</Event>
My VM config
<?xml version="1.0" encoding="UTF-16" standalone="yes"?>
<configuration>
<_24984ed0-bdad-4b90-82b2-5d59f874e91e_>
<ChannelInstanceGuid type="string">{E4E9CD0E-4BBF-4C1B-B655-715781690655}</ChannelInstanceGuid>
</_24984ed0-bdad-4b90-82b2-5d59f874e91e_>
<_7d80d3db-61ee-4879-8879-5609f1100ad0_>
<address type="string">5353,00000000,00</address>
<version type="integer">1</version>
</_7d80d3db-61ee-4879-8879-5609f1100ad0_>
<_83f8638b-8dca-4152-9eda-2ca8b33039b4_>
<controller0>
<drive0>
<pathname type="string">E:\Hyper-V\VHD\LegacyTS.vhdx</pathname>
<pool_id type="string"></pool_id>
<type type="string">VHD</type>
</drive0>
<drive1>
<pathname type="string"></pathname>
<type type="string">NONE</type>
</drive1>
</controller0>
<controller1>
<drive0>
<pathname type="string">SCSI\CDROM&VEN_IBM_SATA&PROD_DEVICE_81Y3681\4&1864BF9E&0&010000</pathname>
<pool_id type="string"></pool_id>
<type type="string">ISO</type>
</drive0>
<drive1>
<pathname type="string"></pathname>
<type type="string">NONE</type>
</drive1>
</controller1>
<version type="integer">5</version>
</_83f8638b-8dca-4152-9eda-2ca8b33039b4_>
<_8e3a359f-559a-4b6a-98a9-1690a6100ed7_>
<port0>
<connection type="string"></connection>
</port0>
<port1>
<connection type="string"></connection>
</port1>
<version type="integer">2</version>
</_8e3a359f-559a-4b6a-98a9-1690a6100ed7_>
<_8f0d2762-0b00-4e04-af4f-19010527cb93_>
<controller0>
<drive0>
<pathname type="string"></pathname>
<type type="string">VFD</type>
</drive0>
</controller0>
<version type="integer">1</version>
</_8f0d2762-0b00-4e04-af4f-19010527cb93_>
<_a80e9c62-750a-4a6b-9548-d46677e806be_>
<ChannelInstanceGuid type="string">{23c9c636-93de-4aec-9bef-220766177a24}</ChannelInstanceGuid>
<Connection>
<AltPortName type="string">Dynamic Ethernet Switch Port</AltPortName>
<AltSwitchName type="string">Intel(R) I350 Gigabit Network Connection - Virtual Switch</AltSwitchName>
<AuthorizationScope type="string"></AuthorizationScope>
<ChimneyOffloadWeight type="integer">0</ChimneyOffloadWeight>
<Feature_C885BFD1-ABB7-418F-8163-9F379C9F7166>
<DisplayName type="string"></DisplayName>
<Flags type="integer">0</Flags>
<Setting_97274751-A1EC-4DC2-941D-B7F9A1AED814>
<Data type="bytes">AAIAAGQAAAAAAAAAAQAAAAAAAAA=
</Data>
<Version type="integer">256</Version>
</Setting_97274751-A1EC-4DC2-941D-B7F9A1AED814>
<Settings>
<Id type="string">97274751-A1EC-4DC2-941D-B7F9A1AED814</Id>
</Settings>
</Feature_C885BFD1-ABB7-418F-8163-9F379C9F7166>
<Features>
<Id type="string">C885BFD1-ABB7-418F-8163-9F379C9F7166</Id>
</Features>
<HostResources>
<HostResource type="string">8758EB1A-9687-41FC-9319-AE867D46BA5C</HostResource>
</HostResources>
<PoolId type="string"></PoolId>
<PreventIPSpoofing type="bool">False</PreventIPSpoofing>
<TestReplicaPoolId type="string"></TestReplicaPoolId>
<TestReplicaSwitchName type="string"></TestReplicaSwitchName>
</Connection>
<FriendlyName type="string">Network Adapter</FriendlyName>
<IsConnected type="bool">True</IsConnected>
<MacAddress type="string">00-15-5D-01-18-02</MacAddress>
<MacAddressIsStatic type="bool">False</MacAddressIsStatic>
<PortName type="string">E7F02418-A1EB-4FF9-84F8-BF461B2D00C6</PortName>
<SwitchName type="string">8758EB1A-9687-41FC-9319-AE867D46BA5C</SwitchName>
<VpciInstanceGuid type="string">{E9444985-111B-404A-82FE-48608A397676}</VpciInstanceGuid>
</_a80e9c62-750a-4a6b-9548-d46677e806be_>
<_ac6b8dc1-3257-4a70-b1b2-a9c9215659ad_>
<base_board>
<serial_number type="string">9595-3600-2199-6834-7686-3927-30</serial_number>
</base_board>
<bios_guid type="string">{B54BE7B5-05A4-4C4A-A2BD-D63272C7CCCD}</bios_guid>
<bios_serial_number type="string">9595-3600-2199-6834-7686-3927-30</bios_serial_number>
<boot>
<device0 type="string">Optical</device0>
<device1 type="string">HardDrive</device1>
<device2 type="string">Network</device2>
<device3 type="string">Floppy</device3>
</boot>
<chassis>
<asset_tag type="string">8437-8592-0329-9603-9215-1886-12</asset_tag>
<serial_number type="string">9595-3600-2199-6834-7686-3927-30</serial_number>
</chassis>
<num_lock type="bool">False</num_lock>
<version type="integer">2</version>
</_ac6b8dc1-3257-4a70-b1b2-a9c9215659ad_>
<_db8b9818-b4bb-4725-b99d-b4612716b6b4_>
<version type="integer">0</version>
</_db8b9818-b4bb-4725-b99d-b4612716b6b4_>
<global_settings>
<devices>
<allow_reduced_fc_redundancy type="bool">False</allow_reduced_fc_redundancy>
<generation_id type="string">883d11122d9b7b2c521be0c045ef3760</generation_id>
<storage_allow_full_scsi_command_set type="bool">False</storage_allow_full_scsi_command_set>
</devices>
<disk_merge_pending type="bool">False</disk_merge_pending>
<metrics>
<devicetype>
<deviceinstance>
<guid type="string">B637F346-6A0E-4DEC-AF52-BD70CB80A21D</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">B637F347-6A0E-4DEC-AF52-BD70CB80A21D</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">3F6F1051-C8FC-47EF-9821-C07240848748;0</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">B637F346-6A0E-4DEC-AF52-BD70CB80A21D</guid>
</devicetype>
<devicetype>
<deviceinstance>
<guid type="string">4764334D-E001-4176-82EE-5594EC9B530E</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">394DCE66-458F-4895-AE56-41D7C9602A49</typecode>
<value type="integer">0</value>
</metric>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">FF85EA46-9933-4436-BE5D-C96827399966</typecode>
<value type="integer">0</value>
</metric>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">04BDF59E-580D-4441-8828-FFFE44472D2D</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">4764334D-E001-4176-82EE-5594EC9B530E</guid>
</devicetype>
<devicetype>
<deviceinstance>
<guid type="string">83F8638B-8DCA-4152-9EDA-2CA8B33039B4</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">70BB60D2-A9D3-46AA-B654-3DE53004B4F8</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">AD29978B-AAB6-44AE-81CD-0609BF929F18;0\0\L</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">83F8638B-8DCA-4152-9EDA-2CA8B33039B4</guid>
</devicetype>
</metrics>
<owner>
<sid type="string">S-1-5-21-1940488291-1951097212-1584025624-1392</sid>
</owner>
<power>
<host_shutdown>
<action type="integer">1</action>
</host_shutdown>
<host_startup>
<action type="integer">1</action>
</host_startup>
</power>
<snapshots>
<list>
<size type="integer">0</size>
</list>
</snapshots>
<unexpected_termination>
<action type="integer">1</action>
</unexpected_termination>
<vhd_path_acled type="bool">True</vhd_path_acled>
</global_settings>
<manifest>
<size type="integer">11</size>
<vdev001>
<device type="string">58f75a6d-d949-4320-99e1-a2a2576d581c</device>
<flags type="integer">1</flags>
<instance type="string">58F75A6D-D949-4320-99E1-A2A2576D581C</instance>
<name type="string">Microsoft Synthetic Mouse</name>
</vdev001>
<vdev002>
<device type="string">197f74e3-b84b-46de-8ae6-82f1cd181cdc</device>
<flags type="integer">1</flags>
<instance type="string">197F74E3-B84B-46DE-8AE6-82F1CD181CDC</instance>
<name type="string">Microsoft Synthetic Keyboard</name>
</vdev002>
<vdev003>
<device type="string">f3cf6965-e8d3-44a9-9b7d-a04245ea7525</device>
<flags type="integer">1</flags>
<instance type="string">F3CF6965-E8D3-44A9-9B7D-A04245EA7525</instance>
<name type="string">Microsoft Synthetic Video</name>
</vdev003>
<vdev004>
<device type="string">84eaae65-2f2e-45f5-9bb5-0e857dc8eb47</device>
<flags type="integer">1</flags>
<instance type="string">84EAAE65-2F2E-45F5-9BB5-0E857DC8EB47</instance>
<name type="string">Microsoft Heartbeat Component</name>
</vdev004>
<vdev005>
<device type="string">2a34b1c2-fd73-4043-8a5b-dd2159bc743f</device>
<flags type="integer">1</flags>
<instance type="string">2A34B1C2-FD73-4043-8A5B-DD2159BC743F</instance>
<name type="string">Microsoft Key-Value Pair Exchange Component</name>
</vdev005>
<vdev006>
<device type="string">9f8233ac-be49-4c79-8ee3-e7e1985b2077</device>
<flags type="integer">1</flags>
<instance type="string">9F8233AC-BE49-4C79-8EE3-E7E1985B2077</instance>
<name type="string">Microsoft Shutdown Component</name>
</vdev006>
<vdev007>
<device type="string">2497f4de-e9fa-4204-80e4-4b75c46419c0</device>
<flags type="integer">1</flags>
<instance type="string">2497F4DE-E9FA-4204-80E4-4B75C46419C0</instance>
<name type="string">Microsoft Time Synchronization Component</name>
</vdev007>
<vdev008>
<device type="string">5ced1297-4598-4915-a5fc-ad21bb4d02a4</device>
<flags type="integer">1</flags>
<instance type="string">5CED1297-4598-4915-A5FC-AD21BB4D02A4</instance>
<name type="string">Microsoft VSS Component</name>
</vdev008>
<vdev009>
<device type="string">6c5addb9-a11a-4e8e-84cb-e6208201db63</device>
<flags type="integer">1</flags>
<instance type="string">6C5ADDB9-A11A-4E8E-84CB-E6208201DB63</instance>
<name type="string">Microsoft RDV Component</name>
</vdev009>
<vdev010>
<device type="string">2fc216b0-d2e2-4967-9b6d-b8a5c9ca2778</device>
<flags type="integer">1</flags>
<instance type="string">A80E9C62-750A-4A6B-9548-D46677E806BE</instance>
<name type="string">Synthetic Ethernet Port</name>
</vdev010>
<vdev011>
<device type="string">d422512d-2bf2-4752-809d-7b82b5fcb1b4</device>
<flags type="integer">1</flags>
<instance type="string">24984ED0-BDAD-4B90-82B2-5D59F874E91E</instance>
<name type="string">Synthetic SCSI Controller</name>
</vdev011>
<version type="integer">260</version>
</manifest>
<properties>
<global_id type="string">B37E54CD-FFBB-44DA-8B7C-322B922EAD72</global_id>
<highly_available type="bool">False</highly_available>
<last_powered_off_time type="integer">130493284127496105</last_powered_off_time>
<last_powered_on_time type="integer">130493284065876653</last_powered_on_time>
<last_state_change_time type="integer">130493284127496105</last_state_change_time>
<name type="string">LegacyTS</name>
<notes type="string"></notes>
<type_id type="string">Virtual Machines</type_id>
<version type="integer">1024</version>
</properties>
<settings>
<global>
<logical_id type="string">B37E54CD-FFBB-44DA-8B7C-322B922EAD72</logical_id>
</global>
<memory>
<bank>
<dynamic_memory_enabled type="bool">True</dynamic_memory_enabled>
<limit type="integer">1048576</limit>
<priority type="integer">5000</priority>
<reservation type="integer">512</reservation>
<size type="integer">4096</size>
<target_memory_buffer type="integer">20</target_memory_buffer>
</bank>
<vnuma>
<max_size_per_node type="integer">14770</max_size_per_node>
</vnuma>
</memory>
<processors>
<count type="integer">1</count>
<features>
<limit type="bool">False</limit>
</features>
<limit type="integer">100000</limit>
<limit_cpuid type="bool">False</limit_cpuid>
<reservation type="integer">0</reservation>
<vnuma>
<count_per_node>
<max type="integer">4</max>
</count_per_node>
<node_per_socket>
<max type="integer">1</max>
</node_per_socket>
</vnuma>
<weight type="integer">100</weight>
</processors>
<stopped_at_host_shutdown type="bool">False</stopped_at_host_shutdown>
<vnuma>
<enabled type="bool">False</enabled>
</vnuma>
</settings>
</configuration>
If its relevant, the host is not yet activated license wise. I downloaded the demo version so I could test my idea before making a purchase to go ahead with full implementation.
As it stands right now I'm not sure how to troubleshoot this. Many searches on google have not turned up any helpful info. Does anyone have any ideas?
Thanks,
D

Hi ,
First , please refer to the supported guest OS of windows 2012 hyper-v :
http://technet.microsoft.com/library/hh831531.aspx
2003/R2 should be with sp2 and max 2 virtual processors .
"'LegacyTS' was reset because an unrecoverable error occurred on a virtual processor that caused a triple fault."
If the issue is not due to the above items , you can try to check the "CPU compatibility " in that VM settings for troubleshooting:
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows server 2008 R2 Failed to boot

Hello,
i need help on the following issue:
i have a win 2008 R2 server failing to boot with a blue screen containing:
stop: c000021a {fatal system error}
the verification of a knownDLL failed. system process terminated unexpectedly with a status of 0x0000020 (0x005b0110 0x0000000000).
the system has been shutdown.

Hi,
As far as I know, the STOP 0xC000021A error occurs when either Winlogon.exe or Csrss.exe fails. When the Windows NT kernel detects that either of these processes
has stopped, it stops the system and raises the STOP 0xC000021A error. This error may have several causes. Among them are the following:
Mismatched system files have been installed.
A Service Pack installation has failed.
A backup program that is used to restore a hard disk did not correctly restore files that may have been in use.
An incompatible third-party program has been installed.
Regarding this error and how to troubleshoot it, the following article can be referred to as reference.
How to troubleshoot a "STOP 0xC000021A" error
http://support.microsoft.com/kb/156669/en
Best regards,
Frank Shen

Ovmapi_4004e server failed error while creating a PVM from FTP network pat

Hi,
I'm trying to create a PVM on OVM 3.0.3 using an ftp server to use an ISO for a Linux 5 installation.
In the create virtual machine wizard for the network path (in boot options) I am specifying:
ftp://oracle:[email protected]/home/oracle/iso/OEL56/
The above link opens up in a browser and I can see the mounted iso.
I mounted the iso as:
cd /home/oracle
mkdir /iso/OEL56/
mount -o ro,loop /ovm_iso/linux/Enterprise-R5-U6-Server-x86_64-dvd.iso /home/oracle/iso/OEL56/
But Starting the VM fails with "ovmapi_4004e server failed" and "Boot loader didn't return any data". I'm assuming it can't read from the iso during boot.
Is there anything wrong with the ftp path . Are non-anonymous ftp users (oracle in this case) allowed or do I need to use anonymous logon.
Regards,
Shahab.

Hi ,
I went a step further by using anyonymous ftp in the network path . (rather than user : password) and the VM started .
The VM boots OK from the staged iso (also tried full DVD contents) and brings up linux installation in text mode only , but for ftp installation mode after asking for the ftp server and directory (which it doesn't take on first attempt) it gives an error "Unable to read package metadata . This may be due to a missing repository directory. Please ensure your install tree has been correctly generated" . It seems its not finding the ftp directory path , although initially it was able to boot from the same ftp path specified in the Network path of the VM configuration wizard.
Regards,
Shahab.

Database Service Fail

I have installed Oracle 8i personal ediation on windows XP Professional.. after the installatoin, oracle successfully gets connected to the database. But when I restart the system , the oracle database servie fails to start . I have tried it many times on XP Professional.
What is the reason....Send me the solution,,,,

Hi jj_the_Skeptic,
in my opinion, there was a performance issue, so perhaps by taking the memory dump, it will help a lot to debug the process, to know why from the web02 become unresponsive.
my colleague said that, if there is alot of users that access the database in the same time, there may issue also here, because access database is not that powerful as sql, that will turn out slow process-time out-failed process
if you need the services at the web server, then you may try to create a webserver+application server together as your testing environment.
if you need direct assistance to capture the memory dump and analysis, please open a ticket to
http://support.microsoft.com.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

PRODUCTION ISSUE- Autoconfig fail on database server

Hi,
I need urgent help on the production issue.
We have 11.5.10.2 apps on HP-unix and 10.2.0.4 database on solaris.
Upgraded java 1.4 and applied patch 9535311 Patch( TXK AUTOCONFIG and TEMPLATE ROLLUP PATCH)
successfully, and copy the appsutil.zip to database tier and unzip and ran adautoconfig.sh on database server.
./adautocfg.sh
Enter the APPS user password:
The log file for this session is located at: /10g/app/oracle/product/10.2.0/lasrp/appsutil/log/lasrp_hcs431oracpd002/01161723/adconfig.log
AutoConfig is configuring the Database environment...
AutoConfig will consider the custom templates if present.
Using ORACLE_HOME location : /10g/app/oracle/product/10.2.0/lasrp
Classpath : /10g/app/oracle/product/10.2.0/lasrp/jre/1.4.2/lib/rt.jar:/10g/app/oracle/product/10.2.0/lasrp/jdbc/lib/ojdbc14.jar:/10g/app/oracle/product/10.2.0/lasrp/appsutil/java/xmlparserv2.zip:/10g/app/oracle/product/10.2.0/lasrp/appsutil/java:/10g/app/oracle/product/10.2.0/lasrp/jlib/netcfg.jar:/10g/app/oracle/product/10.2.0/lasrp/jlib/ldapjclnt10.jar
Using Context file : /10g/app/oracle/product/10.2.0/lasrp/appsutil/lasrp_hcs431oracpd002.xml
Context Value Management will now update the Context file
Updating Context file...COMPLETED
Attempting upload of Context file and templates to database...COMPLETED
Updating rdbms version in Context file to db102
Updating rdbms type in Context file to 64 bits
Configuring templates from ORACLE_HOME ...
AutoConfig completed with errors.
Checked the Log file :
===========================================================================
Config Tool CVMHelper started at Sun Jan 16 17:23:41 EST 2011
===========================================================================
Updating local context file variables for Database Tier
Could not retrieve listener name from listener.ora : AC-00039: Could not parse the file: /10g/app/oracle/product/10.2.0/l
asrp/network/admin/lasrp_hcs431oracpd002/listener.ora
Raised by oracle.apps.ad.tools.configuration.CVMHelper
Making database connection using DBUtil
Please suggest what to do with this.
Thanks

Yes, i can able to connect database and i bounced and db and the listener.
All the application services are started successfully, but now the application services are down.
So far no proper help from ORACLE yet nor i don't beleive going in right direction.
I beleive something to do with listener.ora and tnsnames.ora file. But don't know what is the exact issue.
listener.ora
# Net8 definition for Database listener
=
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= IPC)(KEY= EXTPROCLASRP))
(ADDRESS= (PROTOCOL= TCP)(Host= hcs431oracpd002.mfia.state.mi.us )(Port= 1524))
SID_LIST_ =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME= /10g/app/oracle/product/10.2.0/lasrp)
(SID_NAME = LASRP)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /10g/app/oracle/product/10.2.0/lasrp)
(PROGRAM = extproc)
STARTUP_WAIT_TIME_ = 0
CONNECT_TIMEOUT_ = 10
TRACE_LEVEL_ = OFF
LOG_DIRECTORY_ = /10g/app/oracle/product/10.2.0/lasrp/network/admin
LOG_FILE_ =
TRACE_DIRECTORY_ = /10g/app/oracle/product/10.2.0/lasrp/network/admin
TRACE_FILE_ =
ADMIN_RESTRICTIONS_ = OFF
IFILE=/10g/app/oracle/product/10.2.0/lasrp/network/admin/listener_ifile.ora
tnsnames.ora
LASRP=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=HCS431ORACPD002.mfia.state.mi.us)(PORT=1524))
(CONNECT_DATA=
(SERVICE_NAME=LASRP)
(INSTANCE_NAME=LASRP)
LASRP_806_BALANCE=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=HCS431ORACPD002.mfia.state.mi.us)(PORT=1524))
(CONNECT_DATA=
(SERVICE_NAME=LASRP)
(INSTANCE_NAME=LASRP)
LASRP_FO=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=HCS431ORACPD002.mfia.state.mi.us)(PORT=1524))
(CONNECT_DATA=
(SERVICE_NAME=LASRP)
(INSTANCE_NAME=LASRP)
LASRP_LOCAL=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=HCS431ORACPD002.mfia.state.mi.us)(PORT=1524))
LASRP_BALANCE=
(DESCRIPTION=
(LOAD_BALANCE=YES)
(FAILOVER=YES)
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=HCS431ORACPD002.mfia.state.mi.us)(PORT=1524))
(CONNECT_DATA=

Installing Exchange 2013 CU1 on a production server fails: Couldn't mount the database that you specified.

Error:
The following error was generated when "$error.Clear();
          $name = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxUniqueName;
          $dispname = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxDisplayName;
          $dismbx = get-mailbox -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1;
          if( $dismbx -ne $null)
          $srvname = $dismbx.ServerName;
          if( $dismbx.Database -ne $null -and $RoleFqdnOrName -like "$srvname.*" )
          Write-ExchangeSetupLog -info "Setup DiscoverySearchMailbox Permission.";
          $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
          if( $mountedMdb -eq $null )
          Write-ExchangeSetupLog -info "Mounting database before stamp DiscoverySearchMailbox Permission...";
          mount-database $dismbx.Database;
          $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
          if( $mountedMdb -ne $null )
          $dmRoleGroupGuid = [Microsoft.Exchange.Data.Directory.Management.RoleGroup]::DiscoveryManagement_InitInfo.WellKnownGuid;
          $dmRoleGroup = Get-RoleGroup -Identity $dmRoleGroupGuid -DomainController $RoleDomainController -ErrorAction:SilentlyContinue;
          if( $dmRoleGroup -ne $null )
            trap [Exception]
              Add-MailboxPermission $dismbx -User $dmRoleGroup.Name -AccessRights FullAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
              continue;
            Add-MailboxPermission $dismbx -User $dmRoleGroup.Identity -AccessRights FullAccess -DomainController $RoleDomainController -WarningAction SilentlyContinue;
    " was run: "Couldn't mount the database that you specified. Specified database: DB01; Error code: An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient
error. Error: A transient error occurred during a database operation. Error: An error occurred while preparing to mount database 'DB01'. Error: An I/O error occurred while attempting to enumerate log files in directory 'D:\Logs\DB01'. Error 0x3
I have dismount DB01 off the my Exchange 2013 and my database DB01 is also corrupt not able to repair so I created a new database called DB1. I'm having issue running cumulative
Vien H. Lim

Hi Vien,
Have you checked Martina's suggestion?
If the issue persists, I would like to clarify the following things for further research:
1. Please check if there exists DAG in your Exchange 2013.
2. Please check if the directory 'D:\Logs\DB01' exists.
What's more, I recommend you to use the ESEUTIL/mh cmdlet to check the database status when you create a database.
Hope it helps. If there are any problems, please feel free to let me know.
Best regards,
Amy

Mini Server OS 10.7.2 degrades, locks permissions, fails to boot

New current model Mac Mini Server 5,3 i7 Quad with OS X Lion 10.7.2. Twin drives formatted HFS-journaled, everything stock. Using primarily as a personal and imaging computer using Adobe CS5 apps, not as a server. Originally attempted to set up twin drives as RAID 0, reformatting, but system was unstable and I reformatted drives back to stock HFS-journaled configuration, then did a clean OS install from recovery partition. System ran OK except would not allow me to move items to trash, save screen snapshots, etc. as I did not have privileges (?). Run Disk Utility from recovery partition and repair permissions. No help. Did "Get Info" and changed HD privileges to read & write, all enclosed items, for everyone. Got series of "Missing KEXT" hundreds. Reboot and reinstall system. Repeats behavior. Do a reformat and clean install. System runs fine for several hours, seems stable, so I install Java Runtime, then Adobe CS5, Spyder 3 Elite 4 calibration, ICC profiles, Epson printer and scanner, VueScan, all proven, Lion-friendly apps. System now requires permissions to move or save items, then I get "Missing KEXT" and OS will not reboot.
Awaiting Apple service call where undoubtedly the tech will have me do another reformat and clean OS install over the course of several hours. Will tell me to disconnect everything and not use my apps. Will dick me around for another lost day and then get me further frustrated.
I have been using Macs since 1989 and am ready to throw this one out. FWIW my 2007 Dual MBP is running Lion, installed from the USB stick, just fine, knock on wood. But I could spit nails over this stupid Mini Server and the bone-headed way this OS installs and breaks on what should be a very straight-forward set-up!
How about it Apple, if the KEXT extensions are messed up, a fresh install should fix it. But it isn't. Even if there is some voodoo left, I pity the next poor user who gets trapped in this circle.

Try booting into safe mode and see if the issues continue.
http://support.apple.com/kb/HT1455
this will disable all but a minimum of Apple components
at boot time. Therefor no attempt will be made to load
any kexts that are not Apple.
If booting is successful in this mode, it indicates that one
of your third party products is starting something at boot
time that is either calling or not providing a proper driver.
If things boot without issue, then remove items from the
StartupItems folder at the root /Library folder and also
in your user preferences remove disable any startup items
present there, then reboot normally. If all is well, then put
back startup items one at a time until the boot fails, then
you have found the culprit.
First need to get it to boot properly then can deal with
other issues.
As for the reliability of using the Mini Server as a workstation,
At this point I have been using one for about 4 months now
without issue. I think you may have a 3rd party item that
is causing an issue. It is also possible that even though,
as you claim, your apps are Lion freindly, they may have
a corrupt file in their installers or a previously unknown bug.

Application Server failed to start- Could not sign on to database HR91

Hello there,
I am not able to boot App Server Domain (started but the status is idle.) In the log, i also find the message that
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/100
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/200
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/300
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSBRKDSP_dflt_100\
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSPUBDSP_dflt_200\
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSSUBDSP_dflt_300\
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:54](0) Server failed to start
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](0) Server failed to start
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](0) Server failed to start
Below is the information of my configuration file.
[Startup]
;=========================================================================
; Database Signon settings
;=========================================================================
DBName=HR91
DBType=ORACLE
UserId=PS
UserPswd=PS
ConnectId=people
ConnectPswd=peop1e
ServerName=HR91
StandbyDBName=
StandbyDBType=
StandbyUserId=
StandbyUserPswd=
[Database Options]
;=========================================================================
; Database-specific configuration options
;=========================================================================
SybasePacketSize=
UseLocalOracleDB=0
;ORACLE_SID=
EnableDBMonitoring=1
PSDB Maximum Cursors=
[Security]
;=========================================================================
; Security settings
;=========================================================================
Validate Signon with Database=0
DomainConnectionPwd=PS
Also, i can use PS/PS log into the Datamover but can not use them to log into the application designer
Any help will be appreciated...
Thank you

bandar wrote:
When you have a oracle server running on the same physical machine, why do you need client to support your needs?
As you said, your oracle client installation might be an error, u can always point BIN on app server to your server installation and start the server.That was true up to Oracle 11.1 because the 32bit librairies were shipped in ORACLE_HOME even if that one was a 64bit installation.
It has been dramatically changed within Oracle 11.2 though. The 32bit libraries are not coming anymore within the Oracle 11.2 64bit, you have to explicitely install a 11.2 32bit client to make it work with Peoplesoft on Windows. And configure your Peoplesoft installation to work within that 32bit client.
Consequently, if you have all together installed on the same server (Oracle database 11.2 64bit and Peoplesoft), you must have two Oracle homes : one for the 64bit database, one for the 32bit client.
Nicolas.

Production database server fails to boot

Similar Messages

Maybe you are looking for