Production Order, BOM explosion

Hello Guru,
I have a production order, which when view the Administration tab of it's creation was on 30.01.2009, but in the General Tab it start/finish date was 01.02.2009. And the confirmation was 02.02.2009. One of the component of the FG material for this order was subject for material substitution with change number effective on 01.02.2009. When i check the BOM list of the order it still display the old component A, but in its confirmation goods movement it already use component B the component A seen in the BOM list of the order was not been goods movement on the confirmation. How this happen? And also can you explain to me during creation, release,confirmation of order when is the time it really explode BOm for the Fg material?
Thanks

Thanks Vivek it is clear to me the since the confirmation was been establish effective of the bom change.
But it is still not clear to me that the creation date of the order was 30.01.2009 and its start/finsih date in general tab is 01.02.2009, how was this happen?
And please explain to me the process of BOM explosion, that will be registed in the Master Data tab of the order, when this was really exploded? in the creation, released,confirmed? since in the master data it tells that BOM explosion was on 01.02.2009.
Could you help me interpret the status change done in the order,
BASC batch change assignment complete active 02.02.2009
BCRQ order to be handle in batches active 30.01.2009
BNAS batch not assigned inactive 02.02.2009, active 02.02.2009
CNF confirmed active 03.02.2009
CRTD created inactive 02.02.2009, active 30.01.2009
DLV delivered active 03.02.2009
EXPL external conv. of planned order active 30.01.2009
EXTS change by external system active 30.01.2009
GMPS goods movement posted active 02.02.2009
MACM material commited active 02.02.2009
MANC mat. availability not checked inactive 30.01.2009, active 30.01.2009
MSPT material shortage inactive 02.02.2009, active 30.01.2009
NTUP dates are not updated inactive 30.01.2009, active 30.01.2009
PCNF partially confirmed inactive 03.02.2009, active 02.02.2009
PDLV partially delivered inactive 03.02.2009, active 02.02.2009
PRC pre-costed active 30.01.2009
REL released inactive 03.02.2009, active 02.02.2009
SETC settlement rule created active 30.01.2009
TECO technically complete active 03.02.2009

Similar Messages

Production Order BOM with Variant Configurable Material

Hi,
I have a requirement to process the document items in the Production Order BOM for a variant configurable martial. I am not sure which Function Module will do this purpose. I checked the FM: CS_BOM_EXPL_MAT_V2 and does not seem to be working.
Can you please help me with a suitable Function Module or program that will process the Production Order BOM? Appreciate Your Help.
Thanks,
Kanan
Edited by: Kannan SA on Jul 6, 2011 8:59 PM

What are you doing with the characteristics right now ?
If you want operations selected based on characteristic values, you need to have dependencies written just like you do (or in your case, will do) in your BOM components.
I understand the business-push to not do things 100% at the start and just "oh we'll add that part later" but I would really push back to get that part included initially.

How to compare sale order bom and production order bom.

i would like to provide report with respect to comparation of sale order bom and production order bom, but i am not familiar with SD and PP, can anyone give me some clue? i only know sale order bom is created via 'CS61', afterwards run mrp to get production order, the process appears complicated, i needn't know the process detail, just want to know how to get sale order bom and relative production order bom. please guide me.

Hi,
Check Tcode:CS14 to SD/PP BOM's
Chidambaram

Production Order BOM change

Dear Expers,
How can i restrict the Production order BOM Change. Please tell me with the steps.
Other than screen variant.
Regards
Raghu

Hi,
To do this you can use below mentioned processed.
1. create a user status and give approval to the order at creation and the user will not be able to change any thing in the process order.
2. You can use user exits to restrict changes changes at "materials" screen.
Hope this will help.
regards,
kaushik

Production Order BOM...

Hi,
I am trying to get the associated BOM with a particular Production Order. I was told to use the FM 'CS_BOM_EXPL_MAT_V2', but that gives the material BOM. Is there any FM or BAPI that I can use to get the Production Order BOM? Thanks,Sagar.

hi ,
Thanks for info ,have u heard of BOM usage ? like 1 for production / 5 for sales bom .So When u creating the production order Sap will explode BOM of the FG material , So there is no BOM that is only for production order.
But i will agree with ur problem , what is user can delete Some materials in the Final Confirmations of Production orders So to resolve this issue USE table <b>RESB </b> with RSNUM of AUFK-AUFNR.
correct me if i am wrong.
Regards
Prabhu

Change Alternative Item Quantity in Production Order BOM

Hi Gurus,
I woould like to ask how can I make the Alternative item quantity to become editable. As of now, the system will calculate the percentage in the BOM and default it in the Production order.
Now I have a requirement that in the Production order Change, the user can change the quantity of the Alternative Item based on the situation with out changing the BOM. Just change in the production order. What settings do i need to change?
Thanks,
Raymond

Hi,
Can you let us know why you want the user to make the changes manually ?
Not in front of the system at the moment, but just do an Av. Check to see if you're able to get the switch if the stock situation has changed for the alternative items.
Based on what i know, the field will not be editable & there is no specific setting to make it editable.
Regards,
Vivek

Quote and Sales Order BOM Explosion

We are attempting to utilize a ETO process without PS. We create a sales quotation and begin to build a quote BOM (using type 1 production) and a Routing for the entered quotation. Eventually we decide to create a sales order with reference to the quote. We copy the quote, we copy the quote BOM (type 1 production) to create a sales order BOM (type 1 Production) and copy the quote routing to create a sales order routing. We however make a few additions/changes to the Sales order BOM. When we run MRP for the sales order the system pulls the quote BOM not the sales order BOM.
If we slightly adjusted this proccess and create a costing BOM (type 6) at the quote rather than the production BOM (type 1) and again create a sales order with reference to the quote copying the costing BOM to create a sales order type 1 production BOM MRP says no BOM is found. We believe that MRP should pull the sales order BOM rather than the quote BOM if both are type 1 but most certainly believe that if the quote only has a costing BOM and the sales order has a production BOM MRP should recognize it and utilize it. This does not happen. Any thoughts?

Thanks Piyush.
I have already gone through that. All my questions I have alredy put here .. Could you please care to have a look at it..
Integrating SD with PI and any Services available out of the box to use..
VJ

Sales Order - BOM Explosion

Hi ,
We have a scenario of variant configuration, wherein there is a bom explosion. Whenever there is a change in the BOM, the change is also getting reflected in the order.
How can I prevent this?
Thank you very much
Jaffer

I think that it is the configurator that manage this, so you cannot prevent the re-determination because if you change the configuration, then the also BOM changes.
Roberto

Production order BOM error

hi,
We have an BOM item A validate from 25th, it is a replacement of BOM item B which is invalidate from 25, but the production order created on 21st already used this item A instead of item B.
Could you help me to check what happend?

Hi,
Are you using discontinuation indicator from material master to invalidate compoenent A with B?
In that case if staock of A falls to xero, production order automatically uses compoennet B when availability check is run.
Check and Revert,
Santosh Sarda

Production Order BOM in BOM

Hello everyone, have a question for production which I would appreciate input or suggestions.
Scenario
Have production BOMs 10000 and 10001.
BOM 10001 is component of 10000.
Question:
When Production Order for 10000 is completed is there a way for components which are BOMs to be issued as well ?
I mean how will Production Order treat BOM 10001 in this scenario ?
Also, when running MRP Wizard in order to recomend for creation of 10000 will it automatically recomend creation of 10001 ?

As per you 10000 is a parent item and 10001 is component item.If you did make a production order for 10000 then you will issue 10001 as per BoM.If 10001 is also a parent item and if does not have sufficent quantity in stock then MRP will also generate the recommandation for this.

Object Links fields grey for Production Order,BOM header,BOm item

Hello Friends,
1) In DMS Object links tab ,for objects BOM header,BOM item,Production order fields are grey even though necessary settings are done. Is this standard or I am missing some config.
I did the similar settings for other objects like material master,vendor master,claim etc and I am able to assign these objects in Object links tab.
2) In Production order I can assign the existing document but can't create document from Production order.I maintain value 1 in img Maintain screen for object link --> Auth.
Define doc type --> Define object links --> create document = 2 ( Use Transaction to Create Document)
I can create a document from other objects like Material Master,Claim,PO,PR with similar settings.
Kindly help me in this regard
Regards
Abhijit A. Pachgade

As u right said this is a standard.
generally a document can be attched from the function T-code or from the DMS T-code cvo1n, through the object link tab page. * BOTH WAYS POSSIBLE*
but for BOM, production order it is only one way, u can attach at the function T-code level like co01....ect ONLY ONE WAY
especially for PP transation, its one way
REGARDS
SURYA

Order BOM explosion in sales order

Hi,
Is it possible to explode order BOMS in sales order. If so how.
Intially we are creating sales order. Then we are creating order BOMS. When i open the sales order after creation of order BOMs, order BOM should be exloded enable us to dispatch in staggared lots.
regards,
N. Laxman

Hi,
1) For the BOM to be exploded in the sales document the following customizing setting is required.
A) If the item category group is ERLA the item category of the BOM is TAQ, in the definition of which we have to specify the value A (Explode single level BOM) in the structure scope.
B) If the item category group is LUMF the item category of the BOM item is TAP in the definition of which we have to specify the value A in the field structure scope.
Regards,
Sheik

Process Order BOM Explosion

Hi Experts,
We are creating Rework Order for a Material, and before saving, the BOM is not exploded and no production version was read. However, when I open again the Rework Order, the order now has the BOM exploded, and prodution version was read (but except for the operations). What could be the set up in such a way that the rework order will not explode the BOM? Master Data setup? Config? This is weird cause in other materials, the BOM is not exploded when we make rework orders for them. Thanks in advance!

Hi ,
This problem might not be with any of the settings , please check wheather any status profile is defined and assigned to your order type .
Regards,
Mallikharjun.

Sale order bom explosion in delivery doc

hi all
there is an urgent requirement for my clint
issue is my clint want the BOM should not expolde in sales order, should expolde at the time of delivery only.
is there any possibility please suggest
thanks
sridhar

Hi,
Thanks for your reply.
As per your answer, ur saying we can change the item category but item category is grey at the sales order level and its not modifable.
Can please help how to make editable.
Rgds
Gautam

Tables for Production order BOM item Details

Dear all,
I am new to PP Module i want know table where we can find BOM quantites used against Production.
Also Please help me with table Structure of PP Module.
Regards,
Gaurav Sood

Hi can you please tell how link this table with AFPO table
STLTY     STLTY     CHAR     1     0     BOM category
STLNR     STNUM     CHAR     8     0     Bill of material
STLKN     STLKN     NUMC     8     0     BOM item node number
Regards,
Gaurav

Production Order, BOM explosion

Similar Messages

Maybe you are looking for