Production Order cancellation for wrong confirmation

Hello Guru,
We have wrong confirmation on order 100000152. When user confirms one activity with two different units of measure
(in this case its MIN and KG) SAP doesn't allow to cancel the wrong confirmation we encounter error when trying to
cancel the wrong confirmation (confirmed activity must not be smaller than 0 - check entry)
Please tell us what exactly is wrong in the system that the cancellation isn't allowed. How could we don made the
cancellation for this wrong confirmation.
thanks

Hello Vivek,
Sorry yesterday, i already left out office that why i did not have to reply you about this, i personally do the production order, I do firt confirmed operation 0010 upon finished confirming this operation i confimred next the operation 0020, so that is the sequence we confirmed the order. And all the confirmation that is been done to operation 0010, we do not want to do cancelation all of this, we just made mistake when doing final confirmation on operation 0020, we have confusion on unit of measure for LIMITING WASTE, we really want ti cancel this mistake but doing CO13 for this we encounter the error, please provide us soltuion for this, we only aim to cancel the mistake we did for operation 0020 confirmation. Hope you can help us, even other guys out there.
I have also question about Patel give, (think the quantity confirmed by user for wrong operation is less than 0. Please check the quantity i.e. activity which is confirmed in MIN instead of KG. System might have converted the MIN to KG & it will be less than 0) he has some point, it maybe SAP has do convertion from MIN to KG since LIMITING WASTE in our process has unit of MIN, since we have put KG instead of the right unit, it does make convertion that cause less than 0 value, please let us know how to cancel this and made the proper resolution.
Thanks

Similar Messages

  • Production Order Cancellation with "Period month/year is not open error"

    Hello friends,
    We have this scenario wherein we already "confirmed" Production Order booking for a specific operations which was booked for the month of Sept 2009 using TCODE: CO11 and our Financial transaction was also closed for the month of Sept 2009.
    However, the said booking was incorrect and we need to cancel the said Production Order booking using CO13 and unfortunately we encountered Goods Movement Error Message - "Period 009/2009 is not open for account type M and GL 115700".
    The cancellation of production order only took place on the month of Oct 2009 wherein our Sept 2009 Financial transactions were already closed.
    May I ask how we can cancel the said Confirmed Production Order Booking without opening the Sept 2009 Financial Transaction and be able to process the transaction by taking effect the changes on the month of Oct 2009.
    Thank you!
    Bong

    HI,
    4. After all, I used OB52 and rewrited as below:
    Var. 1000
    A. +
    From acct : blank
    To acct: ZZZZZZZZZZ
    From per.1: 1
    Year: 2002
    To period: 999
    Year: 9999
    From Per.2: 1
    year: 2002
    To period: 999
    Year: 9999
    AuGr: blank
    It's the same with Acc: A,D,K,M,S
    Check M once again and take a help of FI consultant
    Regards
    Kailas ugale
    Edited by: kailasugale on Jan 18, 2012 3:52 PM

  • Error at production order cancellation .

    Dear all ,
    I have posted same issue before this but due to technical problem i am not able to see your replies .
    So plz reply me again for the error at the time of production order cancellation .
    Production order has been confirmed for operation no 0010 , but some reason i want to cancel that . at the time of cancellation error is showing that .
    *enter only one true account .*
    Plz reply me again

    Hi
    If you have confirmed in CO11N, you should do cancellation in co13.
    you might have given by mistake the production order number in confirmation field.
    But you should input the production order number in the filed "order".
    Pl chk this .
    Regards
    YMREDDY

  • Production order %00000000001 for schedule line in Sales order

    Hello Experts,
    We have an issue with the production order whih is created from SO
    There is a sales order and have production order for CTO parts. But the Production order is deleted before confirming. Now when we check in the sales order in schedule lins we are getting as "Production order %00000000001 for schedule line" 00010/0001 can no longer be changed.
    Could any one provided the valuable imputs for what resasons this weeor appears
    Thanks in advance...
    Regards
    Madan

    Hello Vivke,
    Please find teh delatis of the issue
    We have an SO created for the CTO parts and to corrsponding to that generally a production order will be created, But in one of the case for SO the production order is showing as %000000001 in the schedule lines in the SO apart normal number ranges for Production orders.
    Now we need to know in what case the production order appears as %000000001 in the schdule lines, are we missing any thing in order to create production orders?
    Note: Initially there was production order is created correctly when scheduled lines are confirmed, but it is deleted for some reasons and again when the schedule lines are confirming we are facing this issue
    Could you please provide any suggestion on this
    Thanks
    Madan

  • How to find out the list of Production orders created for sales orders

    Dear All,
    Our company wants to generate a report for a List of Materials sold out in a particular Product Hierarchy. Along with that we want to know the list of Production orders created for the sales orders.
    How to identify the production orders which are created based on Sales orders.
    Kindly suggest.
    Regards,
    Mullairaja

    Check these threads
    [Sale Order & Production Order|Sale Order & Production Order;
    [Re: Linking Production Order against a Sale Order MRP run|Linking Production Order against a Sale Order MRP run;
    thanks
    G. Lakshmipathi

  • How to Find Out The Production Order Number For The Sales Order Line Items

    Hi All,
    I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.

    I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK.  or in table AFPO.
    Regards,
    Rich HEilman

  • ABAP Code to get Production Order Quantity for a material-Status REL,CRTD

    hi all,
    I am new to SAP. I am stuck with a problem while writing a abap code for getting all the production order quantities for a material with System Status REL and CRTD. Please help me out. This is what i tried to do.
      IF t_mat[] IS NOT INITIAL.
        t_mat2[] = t_mat[].
        SORT t_mat2 BY matnr.
        DELETE ADJACENT DUPLICATES FROM t_mat2 COMPARING matnr werks.
        SELECT auaufnr afgamng af~plnbez INTO CORRESPONDING FIELDS OF
        TABLE t_ord1 FROM afko AS af INNER JOIN  aufk AS au ON
          afaufnr = auaufnr
        FOR ALL ENTRIES IN t_mat2
        WHERE af~plnbez = t_mat2-matnr
        AND   au~werks  = t_mat2-werks
        AND   af~gltrs IN s_gltrs
        AND   af~gstri IN s_gstri
        AND   au~phas0 IN s_phas0
        AND   au~phas1 IN s_phas1.
      ENDIF.
    Thanks. Regards.
    Sandeep

    Hi
    There is one std tcode COOIS where u can get the information what u have asked
    Pls check
    regards
    Vijay

  • Block Production Order Creation for Particular Order Type

    Hi Experts,
    I want to disable the production order creation for a particular order type XX01 however there are some existing orders for this order type which should be processed further.
    In other words my objective is to -
    1. Block new Production order XX01 creation -
    2. Processing of order type XX01 should be possible.
    Is there standard setting available to achieve this or user exist is the only option..
    Regards,

    Hi
    You can use the user exit PPCO0006 and its function mdoule EXIT_SAPLCOZF_003 to archive that. That function module is called when the user click enter after inputting the material/plant/order type in CO01 then you just need to check the imported value CAUFVD_IMP-AUART which contains the inputted order type then rasise an error message to tell user that the order type cannot be used due to certain reason. The source code need to be written there is very simple.
    Regards.
    Leon.

  • Production order creation , release and confirmation cycle

    Hi All SAP Gurus,
    I am trying to set Production order creation , release and confirmation cycle integrated  to  xMII.
    I am sure there must be many among you who worked on this before.
    So can you please share your experience.
    Thanks in advance
    Regards
    Ritesh

    Hi Ritesh,
    I'll give you what I have been using:
    - Transferring orders to MII
      You can trigger the orders by tcode POIT or an equivalent BAPI (BAPI CLOI_DOWNLOAD_TRIGGER_TRANS) or have the iDOC being sent automatically whenever someone creates a new production order in R/3 (using change pointers). In both cases you will receive an iDOC in XML format from SAP with the production order information on it. After receiving this file a BLS transaction will be required to read the XML file and store it in your local DB.
    - Releasing orders from MII
      You can release the orders from MII using the BAPI BAPI_PRODORD_RELEASE (it will update the order status in R/3 to REL). After that you might want to update the production order status in MII local DB as well. Usually I have the bapi BAPI_PRODORD_GET_DETAIL in place in order to read the production order details whenver I need.
    - Doing confirmations from MII
      After the PO was released, you can do confirmations against each operation using the BAPI BAPI_PRODORDCONF_CREATE_TT. You can send up to SAP good quantity, scrap quantity, labor/machine time, etc. It's a pretty intuitive BAPI.
    If your system is not ready to do goods movement automatically you will need to use BAPI_GOODSMVT_CREATE.
    This is basically what I use in this kind of project. If you have any questions please let me know.
    Regards
    Ricardo

  • Confirmation of production order cancel

    dear experts
             I want to cancel one producter order(last month), but want to set the posting data as current month, if OK, This may not affect the previous month's data.
            but CO13,  can not change the posting data.
    is this business requirement reasonable? if yes ,how to realize?
    best regards
    lee

    Hi,
    In std. system it is not possible to specify the cancellation date in CO13. The cancellation will be done on the same date as the confirmation posted.
    Since it is last month, just discuss with your FI/ Co person & proceed with the cancellation.
    Hope it clarifies.
    Regards,
    Vivek

  • Error at the time of Production order cancellation.

    Hi PP Gurus,
    The transactions happened when Sales order costing was activated
    1. Sales order created
    2. Production order creation, release
    3. Production order confirmation and QM lot created
    4. QM lot cleared with Result recording and UD has taken
    5. While doing PGI system started to ask about Sales order costing
    Now as per CO requirements all the documents has to be reversed and Sales order has to be deleted. But when I'm trying to cancel production order confirmation, it's giving error that Stock of Sales order quantity is deficit in Quality stock (As it is already moved to unrestricted Sales stock). And when we reversed it through Movement type 322 its giving error like UD has already taken for partial lot....
    We tried following options.
    1. Another Sales order irrelevant to Sales order costing created and we tried to move stock from old sales order to new sales order through movement type 413E but got the same Sales order costing error.
    2. We tried to move stock from old Sales order to unrestricted use, same error we got.
    As per my knowledge UD can't be reversed in Standard system.... What could be done in that case... Please help if some one faced the same situation.
    Thanks & Regards,
    Abu Arbab

    Dear,
    If you want to change UD code, it is very simple from QA12. But if you want to reverse goods movements also, it is some thing big process. please check OSS notes 175842.
    Please check SAP note note 33924 Reversing the UD and 175842-QM lot stock reversal.
    Please refer my reply in this thread also,
    UD cancellation or reverse after GR
    Please go through the transaction CO09, you enter your plant,Material, MRP area (Plant) and Checking rule then execute, it will take you to next screen there you can able to see what are the conformed quantities for the Sales document wise(Reservations), and also you can see the current stock possition (Cummiletive ATP Quantity).
    Regards,
    R.Brahmankar

  • Query based on production order,receipt for production and issue for produc

    hello  sap experts i need a query on
    this is my query but iam not getting correct result could anypne help out  any relation is wrong in this pls verify it and reply asap .
    SELECT T0.[DocNum], T0.[ItemCode], T0.[PlannedQty], T1.[ItemCode], T1.[PlannedQty], T3.[Quantity], T5.[Quantity]
    FROM OWOR T0  INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry, OIGN T2 INNER JOIN IGN1 T3 ON T2.DocEntry = T3.DocEntry, OIGE T4 INNER JOIN IGE1 T5 ON T4.DocEntry = T5.DocEntry
    WHERE T1.[ItemCode]   =  T3.[ItemCode] and  T1.[ItemCode]   =  T5.[ItemCode] and T0.[PostDate] between [%0] and [%1]
    GROUP BY T0.[DocNum], T0.[ItemCode], T0.[PlannedQty], T1.[ItemCode], T1.[PlannedQty], T3.[Quantity], T5.[Quantity]
    ORDER BY T0.[DocNum]
    regards
    Jenny

    Hi,
    Here is another suggestion.
    select t0.docnum,
    case 
    when t0.status = 'P' then 'Planned'
    when t0.status = 'R' then 'Released'
    when t0.status = 'L' then 'Closed'
    when t0.status = 'C' then 'Cancelled'
    else t0.status end as 'Production Order Status',
    t0.ItemCode as 'Parent Item', t0.PlannedQty as 'Planned Parent Item',
    T1.ItemCode as 'Component Item', T1.PlannedQty as 'Planned Component Item',
    (select T2.Quantity
    from ign1 t2
    where t0.itemcode=t2.itemcode and t0.docentry = t2.baseentry) as 'Received End Product',
    case
    when t1.issuetype = 'B' then 'Backflush'
    when t1.issuetype = 'M' then convert(varchar(15), t3.quantity)
    end as 'Issued Component Item'
    FROM OWOR T0
    INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry
    left join ige1 t3 on t1.docentry = t3.baseentry and
    t1.linenum = t3.baseline
    Somehow I get the feeling it would make more sense to have it in 2 separate reports. But if it works for you it's good.
    Let us know how it goes and if these are indeed the reports you are looking for.
    Jesper

  • Production Order Cancel

    Hi,
    I have AUTO GR set for production orders.But when i do the cencellation of prodcution order GR reversal is not happening but only the confiramtion is getting reversed.
    Please let me know what is the Issue.
    Regards
    Ramesh

    Dear ,
    There are so many reason why Auto GR is not getting canceled .Please note the following :
    1.If you have confirmed order by CO15 or CO11n  and if Auto GR is activated then material document will not be cancled
    by MBST or MIGO. Cancle confirmation by CO13,your material document will be cancled  automatically.You can frist try to cancel it through MBST with movement type 102 and then cacel operation in CO13.While cancelling the confirmation check the goods movement tab page by clicking on that then save the cancellation.The material document will be cancelled.Please note that the document won't be reversed if the qty is invoiced , delievered after production completed or  settled , WIP , FY period is closed , Material period is closed etc .
    2.If confirmation for order is cancled but Auto GR reversal does not happen then you need to find the error record in COGI,if you find in COGI clear the error record based on the error message.If you do not found error in COGI then execute transaction CO14 for the order and select the cancelled confirmation for display, here in the display confirmation click the goods movement button, you can find the 102 movement (Gr reversal) highlighted in Blue color and you would be getting a message in task bar "Highlighted items needs to be reprocessed".For this condition you need to execute transaction CO1P,as followed...
    you can find the record (reason)in CO1P. Execute CO1P for the order by activiating all the checkbox for GI,GR,Activites, you would find the record here, just select the record and save the transaction. Some time the data gets posted directly or you may now find the error record in COGI.
    3.Analysis in OMJJ with Movement Type -102 , wether , Reversal is activated by CO13 and farther set up for CO11N, CO12
    Hope this will help you to figure out the issue .
    Regards
    JH

  • Production Order Reservation for Available Quantity?

    Hi Gurus:
    We have the following situation. 
    Production order is created for material A.  Component Z on this order requires 100 units.  10 Units are available in stock for Batch M.  Reservation is created for 100 units of Batch M.  Availablility Check confirms 10 units. 
    How can we get the reservation to match what is available and stop allocating the required quantity if it is not available? 
    Thanks for your help.
    Nic

    It seems the correct batches are being picked based on batch determination....it is only the reservation which seems to be differing.  As in the example I gave the availability check proposed the correct batch and the correct amount which matched what was currently available in inventory...
    However, the reservation itself was for the full quantity even though it was not available. 
    So the concern is strictly with the reservation not equaling what is actually available and instead matching the full requirement.
    Hope that helps?
    Nic

  • Production Order Cancelled Issue

    Hello PP Gurus,
    I have a issue related to production order
    I creae a Sales order with order qty 10
    Then I created 2 Production Order with Transaction CO08 each with 5 qty.
    Then I go through the transaction MDBT and Then ME57. ME57 shows that I need to purchase 10 qty.
    Then when I do MD04 it shows that the 2 production orders and the purchase requisition fo 10
    Then again I do MDBT
    It shows that the 2 production order were cancelled and a PR is opened in its place
    Kindly tell me the reason why the order are cancelled and the PR is still there.
    Regards
    Nilesh

    First I would like to know, whether the material is In housed production or external procurement?
    I feel as per the master data of the material, the material is externally procured. Then why you want the production order for the material.
    It shows that the 2 production order were cancelled and a PR is opened in its place
    I feel as per the  schedule line category in sale order/ material master, the material is relevant to purchase not a production, that's the reason the order is cancelled.

Maybe you are looking for