Production order change document

Hi experts,
Can anybody please tell me where I can get change document for production order.
I have first created order & then saved it. Later on I changed BOM component quantity.I didn't get any change document in GOTO--Change document. Where I faced message - No change process found for order 1000470.
Please help.

Hi,
You will be able to get change documents, if you're working with Order Change Management. If not, then you will not be able to get the same.
For OCM, you would need to configure the profile in OPL7 & OPL9, assign the same in material master. Then you will be able to manage changes via COCM.
To understand better, refer to the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/3699761bc211d2b62b0000e8359890/content.htm
Hope the above helps.
Regards,
Vivek

Similar Messages

Production Order Change Documents - History

Dear friend,
please give me one solution for PP Module. i want change documents history for production Order (PP Module) same like Material master chnage history display in MM04.
Thanks & Regards,
PP Module Owner

Dear,
All major changes in order will be tracked through the status management. Hence if you activate status management in order dependent parameter in IMG, I hope it will solve your problem. However OCM is the best way to get the changes happened to order, but main aim of OCM is to track the changes of BOM/routing w.r.t. change number or sales order and effect the changes.
Hence depending on your requirement you can take a decision between OCM or status management
Production >shop floor control> master data>order> order dependneent paramater

User exit to populate profit center in production order change (CO02)

Hello,
The requirement is to populate the profit center in production order change (Tcode CO02). I know the user exit that can populate profitcenter in CO01 but it's not called in CO02. Ther other user exits that I found are for checking but not for changing
Is there a user exit /BADI that can acheive this requirement?
Thanks a lot for your advise.
Joe

Hi,
Use the user exit PPCO0007 ,function module EXIT_SAPLCOZV_001
HEADER_EXP-PRCTR
Thanks,
Shailaja Ainala.

Regarding Production order changes work flows

Hi to all,
I activated WS20000387 work flow template. its regarding the production order changes .
briefly: i created one production order, immediately assigned person will get a message in his SAP inbox.
he has to double click/execute on that mail, then system will take u directly to the production order screen. there is no need to enter that Order no.
but here, after double clicking, system is asking The Order no.
we have clients 300,500 and 700.
i executed same work flow in 300 successfully,
700 is not modifiable. thats y i did all the settings in 500 and copied the request to 700.
i am getting the problem in 700,, i compared all the settings in 300 and 700, but no use,,,all are same,,,but not executing in 700.
anybody can help me in this regard.

You Can use below FM to confirm Production order and it is very simple BAPI.
BAPI_PRODORDCONF_CREATE_HDR -> just check in where used list.
Thanks
Seshu

Production Order Changes...

I need the ability to identify changes made to a production order and the user that made the change. There are instances of incorrect changes being made to production orders with no way to identify the user that made the change. As examples, components are being 'final issued' but no one knows who set the 'final issue' indicator. Labor hours are changed with no traceability to the user who made the change.
SAP contains the capability to track changes to material master data, BOM data, and routing data. Is there the same capability for production order data?

Dear ,
You need to activate Order Change Managment-SPRO-Shop Floor Control -System Modification in case to trak production order change :
A.Enhancements for Order Maintenance
        1.Enhancement for the Display/Change of Order Header Data
        2.Check Changes to the Production Order Header
        3.Checks Changes to Order Operations
B.Enhancements for Order Change Management (OCM)
         1.Check Conflict for Change Step
         2.Definition of Comparison Fields for Order Comparison
C.Enhancements for Order Confirmation
Otherwise , from Basis side you can trak by
1.ST03
2.STAD-Provide SAP T-code , user id , Client .Here you can find out what are the changes user did for any production order based on SAP Trxn .
Regards
JH

Send production order changes to external system IDOC

Hi,
I need to send production order changes to an an external system. I understand that I can trigger idocs using t-code POIT.
but my requirement is when a order is changed, i want to trigger an IDOC to external system with the new PO data...how can I achieve this

Hi Swathi,
A very high level idea.
You can use the user exit..."LXCO1U06" and call the transaction POIT in back goround and submit the idoc. This exit is used @ save of TA code CO02. Moreover as the production order can be changed through several transactions like COHV, CO40, COOIS etc....you have to check whether this exit would be applicable for all transaction.
Regards,
Chinna

AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

Hi Experts...
Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
Folks need your expert comments and valuable suggestions....
Thank You...
Lucky

Dear
You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
Refer : Re: Production order changes history
Production orders
Regards
JH

Deactivating production order changes after 1st operation is confirmed

Hi,
I want to deactivate production order changes after 1st operation is confirmed through CO11n.Ie. production order qty should not be allowed to change after 1st operation is confirmed.
Expecting ur immense help on this.
Regards,
JS Karthi

Dear ,
PPCO0007
EXIT_SAPLCOZV_001 Exit when saving production order
Provide the restrictions in coding, so that when saving the order check for the order status PCNF or CNF and quantity change.
Check thread
first operation confimed - after system allowed changed order qty
Regards,
Ishwar

About production order change historic records

The users want to know about production order change historic records.how can I get it, please do me a favour. Thanks.

Hello ,
Look into:
SAP NOTE: 1407961 and
History of production order changes
Please search the forum first for such questions.
- Pushkar
Edited by: Pushkar Patil on Aug 6, 2010 9:56 AM

Production order change

Dear All,
I want to restrict the changes made to the order once it is released how can i do it?
Vinit

Dear ,
What are you looking for in production order changes ? Is it qty ? Is it Component ?
I think you don't have to use OCM, you can also use the modification which is provide by SAP in SAP note 390635
I hope you can restrict at user level changes in various screen variant by appling User exit .You need to take the help of ABAPer to utilise the user exit in CO02.
1.You may use user exit EXIT_SAPLCOBT_001 -(PPCO0007).You can make use of the exception NOT_ALLOWED_WITH_ERROR in this exit
2.PPCO0012 Production Order: Display/Change Order Header Data
3.PPCO0018 Check for changes to production order header
4.PPCO0019 Checks for changes to order operations
For farther information , you can goto T code CMOD - Project Managment of SAP Enhancements- Click on Utilities in the menu bar - SAP Enhancements - under Exit name Give * ,remove maximum number of hits value from 500 and execute.Select one which suits to your requirement.
Hope this will be useful to you
Regards
JH

Production order changes Tracing

dear all,
in the production order how can i find out who make changes like delete materials if there are many people can use co02 , I need to make a tracing to a particular order , is there's any log to do this?
thanks in advance
Milad

There is no std T code available for check the changes made in production order
IF you want you need to activate the OCM or apply the note 390635
please refer below thread
Process Order Change Log history
Re: Production Order Change Management

How to read service order change document data

Hi Experts,plz help me,my requirement is to read the service order change document data,for that one i need to read from cdhdr and cdpos tables,so what i need to do.in input parameters for cdhdr table in place of ibjectclass and objectid what i need to pass.plz help me.

Same for CDHDR and CDPOS.
OBJECTCLAS = 'ORDER'
OBJECTID = combination of client(AUFK-MANDT) + Order category(AUFK-AUTYP) + Order number (AUFK-AUFNR)
for example
OBJECTCLAS = 'ORDER'
OBJECTID = '10030004001108788'
Chaiphon

Add a new field to Co02 ( production order change )

Hello, I need to add a new field to the transaction Co02. I've found the following customer exit, but don't know which is the proper one. Maybe none of them can meet my requirement. Does anybody has any idea or experience?
Exit name     Short text
PPAPO002     Publication of APO Data in Transfer from APO to R/3
PPAPO003     Production Order R/3->APO: Check if Operation is APO-Relev.
PPAPO004     Planned Order Conversion from APO: New BOM Explosion?
PPAPO005     Enh. of Relationships in Proc. Order during Transfer to APO
PPAPO006     Influencing Initial Supply of Manufacturing Orders
PPAPO007     Overriding Checkbox Fields for Production Order APO -> R/3
PPAPO008     Override Order Type for Planned Order Conversion
PPAPO009     Customer Exit for Addition of Components and Items
PPAPO010     Filtering Components out of Quantity Propagation
PPAPO011     Performance-Related Adjustment of Remaining Duration
PPCO0001     Application development: PP orders
PPCO0002     Check exit for setting delete mark / deletion indicator
PPCO0003     Check exit for order changes from sales order
PPCO0004     Sort and processing exit: Mass processing orders
PPCO0005     Storage location/backflushing when order is created
PPCO0006     Enhancement to specify defaults for fields in order header
PPCO0007     Exit when saving production order
PPCO0008     Enhancement in the adding and changing of components
PPCO0009     Enhancement in goods movements for prod. process order
PPCO0010     Enhancement in make-to-order production - Unit of measure
PPCO0012     Production Order: Display/Change Order Header Data
PPCO0013     Change priorities of selection crit. for batch determination
PPCO0014     Select process orders for external relationships
PPCO0015     Additional check for document links from BOMs
PPCO0016     Additional check for document links from master data
PPCO0017     Additional check for online processing of document links
PPCO0018     Check for changes to production order header
PPCO0019     Checks for changes to order operations
PPCO0020     Process order: Display/change order header data
PPCO0021     Release Control for Automatic Batch Determination
PPCO0022     Determination of Production Memo
PPCO0023     Checks changes to order components
PPCP0001     P.Cost Planning: Additional Cost Elements for Person
PPEACT01     Customer Fields at Mode D
PPECMP01     Customer Fields: CMP Nodes
PPECMP02     Customer Fields: CMP Variants
PPEGEN01     General Engineering Node: Customer Fields
PPERES01     Customer Fields at RES Node
BTW, if this is impossible, can I rename a field (field name on the screen) of Co02 that I don't need, and add my own values to it?
Thanks.
Nuno

Hi Nuno,
how did you solve this problem?
tks

Lock for changes in GR and GI & production order change

Hi all,
We have MTO scenario. We do delivery after GR and then make invoice. My client's requirement is whenever the delivery is made, system should restrict the changes in production order and should not allow to change GR/GI documents. How we can map this? Kindly help at the earliest.
SmanS

Hi,
please find the procedure below to block changes to prodn order once it is created/ released. I am not sure how to control changes to GR/GI based on status of prodn order. But chenges to order itself can be blocked as follows.
You need to create a status profile in BS02
Double click the status profile.
Enter the user status as CRTD
Tick the initial status as enabled
Place the cursor on the status profile
Select the object type as PP ORDER HEADER
Now choose the user status
Double click the user status
Goto create mode
select change and set forbid radio button
save.
Assign this status profile to order type in OPJH TCode (Prodn order type). CORN (Process order type). For Prodn order type you can assign 2 status profiles, one at order header level and 2nd at operation level (OPJH).
Now once you have created the production order the system automatically forbids any change.
Regards,
Ashok

Production order changes overview

Hello,
I would like to know if, in the new SAP version (6.0), is there any way to display the changes done for a production order. The same functionality as in the material master chnage documents.
Regards
Laura

I am afraid, it is a No without OCM(Order change Management)
We could only see the Order status changes provided relevant Stauts change settings are active in OPL8 implementation tab.
However I guess,we can get the changes in a prodcution order with the implementation of OCM.
Regards
Ratan

Production order change document

Similar Messages

Maybe you are looking for