Production Order Change Documents - History

Dear friend,
please give me one solution for PP Module. i want change documents history for production Order (PP Module) same like Material master chnage history display in MM04.
Thanks & Regards,
PP Module Owner

Dear,
All major changes in order will be tracked through the status management. Hence if you activate status management in order dependent parameter in IMG, I hope it will solve your problem. However OCM is the best way to get the changes happened to order, but main aim of OCM is to track the changes of BOM/routing w.r.t. change number or sales order and effect the changes.
Hence depending on your requirement you can take a decision between OCM or status management
Production >shop floor control> master data>order> order dependneent paramater

Similar Messages

  • Production order change document

    Hi experts,
    Can anybody please tell me where I can get change document for production order.
    I have first created order & then saved it. Later on I changed BOM component quantity.I didn't get any change document in GOTO--Change document. Where I faced message - No change process found for order 1000470.
    Please help.

    Hi,
    You will be able to get change documents, if you're working with Order Change Management. If not, then you will not be able to get the same.
    For OCM, you would need to configure the profile in OPL7 & OPL9, assign the same in material master. Then you will be able to manage changes via COCM.
    To understand better, refer to the link
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/3699761bc211d2b62b0000e8359890/content.htm
    Hope the above helps.
    Regards,
    Vivek

  • Where can  we  see the  " Change document history " of  internal order .

    Dear  Experts
    Where can  we  see the  " Change document history " of  internal order .
    which are the tables  help us  to  get the  change  document history .
    Eg : The   Order  From  CRM  get  replicated  to internal order in  ECC . When   we  do 
    some  changes ( addition  of new  line  item ) in  CRM  , it  will update the internal order in  ECC.  I  want to   see the  changes in  Internal order .
    Regards
    Raj

    Hi  Rupesh
    Thank you  Rupesh   for your  updation and   Answer .  i  still have some  doubts . i  tried  the  same in  system ,  here are  some of   my  findings ,
    Will   it  gives  complete date wise  log  of   changes in  I/O. -  I am not  able  to   see the  full   log
    Eg :  When  ever make  some  changes in   The CRM   order ,  the   changes  get  replicated  to  ECC as  the  CRM REMOTE as the user , But   here i could not  get that  complete  history  of  change .
    If you  have  any  other  solution , pls  let me  now .
    Regards
    Raj

  • AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

    Hi Experts...
    Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
    I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
    I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
    In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
    Folks need your expert comments and valuable suggestions....
    Thank You...
    Lucky

    Dear
    You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
    Refer : Re: Production order changes history
    Production orders
    Regards
    JH

  • About production order change historic records

    The users want to know about production order change historic records.how can I get it, please do me a favour. Thanks.

    Hello ,
    Look into:
    SAP NOTE: 1407961 and
    History of production order changes
    Please search the forum first for such questions.
    - Pushkar
    Edited by: Pushkar Patil on Aug 6, 2010 9:56 AM

  • Production order changes Tracing

    dear all,
    in the production order how can i find out who make changes like delete materials if there are many people can use co02 , I need to make a tracing to a particular order , is there's any log to do this?
    thanks in advance
    Milad

    There is no std T code available for check the changes made in production order
    IF you want you need to activate the OCM or apply the note 390635
    please refer below thread
    Process Order Change Log history
    Re: Production Order Change Management

  • User exit to populate profit center in production order change (CO02)

    Hello,
    The requirement is to populate the profit center in production order change (Tcode CO02). I know the user exit that can populate profitcenter in CO01 but it's not called in CO02. Ther other user exits that I found are for checking but not for changing
    Is there a user exit /BADI that can acheive this requirement?
    Thanks a lot for your advise.
    Joe

    Hi,
    Use the user exit PPCO0007 ,function module EXIT_SAPLCOZV_001
    HEADER_EXP-PRCTR
    Thanks,
    Shailaja Ainala.

  • Regarding Production order changes work flows

    Hi to all,
    I activated WS20000387 work flow template. its regarding the production order changes .
    briefly: i created one production order, immediately assigned person will get a message in his SAP inbox.
    he has to double click/execute on that mail, then system will take u directly to the production order screen. there is no need to enter that Order no.
    but here, after double clicking, system is asking The Order no.
    we have clients 300,500 and 700.
    i executed same work flow in 300 successfully,
    700 is not modifiable. thats y i did all the settings in 500 and copied the request to 700.
    i am getting  the problem in 700,, i compared all the settings in 300 and 700, but no use,,,all are same,,,but not executing in 700.
    anybody can help me in this regard.

    You Can use below FM to confirm Production order and it is very simple BAPI.
    BAPI_PRODORDCONF_CREATE_HDR -> just check in where used list.
    Thanks
    Seshu

  • Production Order Changes...

    I need the ability to identify changes made to a production order and the user that made the change.  There are instances of incorrect changes being made to production orders with no way to identify the user that made the change.  As examples, components are being 'final issued' but no one knows who set the 'final issue' indicator.  Labor hours are changed with no traceability to the user who made the change.
    SAP contains the capability to track changes to material master data, BOM data, and routing data.  Is there the same capability for production order data?

    Dear ,
    You need to activate Order Change Managment-SPRO-Shop Floor Control -System Modification  in case to trak production order change :
    A.Enhancements for Order Maintenance
            1.Enhancement for the Display/Change of Order Header Data
            2.Check Changes to the Production Order Header
            3.Checks Changes to Order Operations
    B.Enhancements for Order Change Management (OCM)
             1.Check Conflict for Change Step
             2.Definition of Comparison Fields for Order Comparison
    C.Enhancements for Order Confirmation
    Otherwise , from Basis side you can trak by
    1.ST03
    2.STAD-Provide  SAP T-code , user id , Client .Here you can find out what are the changes user did for any production order based on SAP Trxn .
    Regards
    JH

  • Send production order changes to external system IDOC

    Hi,
    I need to send production order changes to an an external system. I understand that I can trigger idocs using t-code POIT.
    but my requirement is when a order is changed, i want to trigger an IDOC to external system with the new PO data...how can I achieve this

    Hi Swathi,
    A very high level idea.
    You can use the user exit..."LXCO1U06" and call the transaction POIT in back goround and submit the idoc. This exit is used @ save of TA code CO02. Moreover as the production order can be changed through several transactions like COHV, CO40, COOIS etc....you have to check whether this exit would be applicable for all transaction.
    Regards,
    Chinna

  • Deactivating production order changes after 1st operation is confirmed

    Hi,
    I want to deactivate production order changes after 1st operation is confirmed through CO11n.Ie. production order qty should not be allowed to change after 1st operation is confirmed.
    Expecting ur immense help on this.
    Regards,
    JS Karthi

    Dear ,
    PPCO0007
    EXIT_SAPLCOZV_001 Exit when saving production order
    Provide the restrictions in coding, so that when saving the order check for the order status PCNF or CNF and quantity change.
    Check thread
    first operation confimed - after system allowed changed order qty
    Regards,
    Ishwar

  • Production order change

    Dear All,
                      I want to restrict  the changes made to the order once it is released how can i do it?
    Vinit

    Dear ,
    What are  you looking for in production order changes ? Is it qty ? Is it Component ?
    I think you don't have to use OCM, you can also use the modification which is provide by SAP in SAP note 390635
    I hope you can restrict at user level changes in various screen variant  by appling User exit .You need to take the help of ABAPer to utilise the user exit in CO02.
    1.You may use user exit EXIT_SAPLCOBT_001 -(PPCO0007).You can make use of the exception NOT_ALLOWED_WITH_ERROR in this exit
    2.PPCO0012 Production Order: Display/Change Order Header Data
    3.PPCO0018 Check for changes to production order header
    4.PPCO0019 Checks for changes to order operations
    For farther information , you can goto  T code CMOD - Project Managment of SAP Enhancements- Click on Utilities in the menu bar - SAP Enhancements - under Exit name Give  * ,remove maximum number of hits value from 500 and execute.Select one which suits to your requirement.
    Hope this will be useful to you
    Regards
    JH

  • Change Documents history

    We are looking for a change document history report which can list all the accounting documents which have been changed for a period of time.  I know we can retrieve the change documents for both parked and posted documents from the change history from the document itself. 
    I checked in the system but couldn't find any report whch can give me all the changes for all documents in one place.  Does anyone have any idea on this issue.

    > Hi,
    >
    > use report <b>RFBABL00</b>
    >
    >
    > pls reward useful answers
    > thank you!
    >
    > A.
    >
    >
    > Message was edited by: Andreas Mann
    Andreas
    Thanks for that. I've learnt something today!!!
    Regards
    Barry

  • How to read service order change document data

    Hi Experts,plz help me,my requirement is to read the service order change document data,for that one i need to read from cdhdr and cdpos tables,so what i need to do.in input parameters for cdhdr table in place of ibjectclass and objectid what i need to pass.plz help me.

    Same for CDHDR and CDPOS.
    OBJECTCLAS = 'ORDER'
    OBJECTID = combination of client(AUFK-MANDT) + Order category(AUFK-AUTYP) + Order number (AUFK-AUFNR)
    for example
    OBJECTCLAS = 'ORDER'
    OBJECTID = '10030004001108788'
    Chaiphon

  • Production Order Change History

    Is there a way to track changes to production orders?  If so, what is the table to view these changes?
    Thank you,
    Jesse Powell

    HI
    Yes there are tables where you can find the changes made to the Production Order.
    The tables are CDHDR and CDPOS.
    But to see the changes that you made in the Prod Order being reflected in these tables , you should have the Enhancement for change management  activated.
    Information regarding this enhancement  can be got from the OSS note 390635.
    Thanks 
    Jerry

Maybe you are looking for

  • UNABLE TO EXECUTE THE CMDSQL SCRIPT IN A STORE PROCEDURE.

    I am trying to call a .sql file from sql cmd mode. The requirement is to pass the .sql file as parameter value to the cmd script which I have able to achieve,here is the code which is working fine . declare @x sysname set @x = 'C:\Users\testuser\Desk

  • Remote Client Copy - Ended in Erros

    Hi Friends, We recently performed a Remote client copy. What we normally do is we restore an latest offline backup of the Prod into an instance built exclusively for performing client copies into our QA system. So if our actual PROD is ABC ( producti

  • Any idea of how to resolve this issue?

    When trying to download an e book from my local library (which I've done before successfully) I suddenly getn an error, "One or more tasks were running when ADE abnormally terminated. Do you want to resume pending tasks." No matter how I answer that

  • JScrollPane bars do not show

    Hi, I add the Panel that contains a large image to a scroll pane. However, the image is large, and the scroll bars do not show.     JScrollPane ScrollPaneScroller = new JScrollPane();     this.getContentPane().add(ScrollPaneScroller, BorderLayout.CEN

  • New to custom component

    Hi, I would like to have a few answer for those questions: 1. What is the main purpose of creating custom component (ie. imagine I want to create a custom button component)? 2. Why do we need to extend our custom component? Also, is this make our com