Production order changes overview

Hello,
I would like to know if, in the new SAP version (6.0), is there any way to display the changes done for a production order. The same functionality as in the material master chnage documents.
Regards
Laura

I am afraid, it is a No without OCM(Order change Management)
We could only see the Order status changes provided relevant Stauts change settings are active in OPL8 implementation tab.
However I guess,we can get the changes in a prodcution order with the implementation of OCM.
Regards
Ratan

Similar Messages

  • Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

    I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order.  Can you pl. tell me how to configure this scenario.
    Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
    Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

    Hi,
    Automatic Batch Determination for production order components is possible by configuration.
    You can also refer below discussions to map your scenario.
    Batch determination in production order | SCN
    Automatic Batch Determination in Production order
    Regards,
    Naresh

  • User exit to populate profit center in production order change (CO02)

    Hello,
    The requirement is to populate the profit center in production order change (Tcode CO02). I know the user exit that can populate profitcenter in CO01 but it's not called in CO02. Ther other user exits that I found are for checking but not for changing
    Is there a user exit /BADI that can acheive this requirement?
    Thanks a lot for your advise.
    Joe

    Hi,
    Use the user exit PPCO0007 ,function module EXIT_SAPLCOZV_001
    HEADER_EXP-PRCTR
    Thanks,
    Shailaja Ainala.

  • Regarding Production order changes work flows

    Hi to all,
    I activated WS20000387 work flow template. its regarding the production order changes .
    briefly: i created one production order, immediately assigned person will get a message in his SAP inbox.
    he has to double click/execute on that mail, then system will take u directly to the production order screen. there is no need to enter that Order no.
    but here, after double clicking, system is asking The Order no.
    we have clients 300,500 and 700.
    i executed same work flow in 300 successfully,
    700 is not modifiable. thats y i did all the settings in 500 and copied the request to 700.
    i am getting  the problem in 700,, i compared all the settings in 300 and 700, but no use,,,all are same,,,but not executing in 700.
    anybody can help me in this regard.

    You Can use below FM to confirm Production order and it is very simple BAPI.
    BAPI_PRODORDCONF_CREATE_HDR -> just check in where used list.
    Thanks
    Seshu

  • Production Order Changes...

    I need the ability to identify changes made to a production order and the user that made the change.  There are instances of incorrect changes being made to production orders with no way to identify the user that made the change.  As examples, components are being 'final issued' but no one knows who set the 'final issue' indicator.  Labor hours are changed with no traceability to the user who made the change.
    SAP contains the capability to track changes to material master data, BOM data, and routing data.  Is there the same capability for production order data?

    Dear ,
    You need to activate Order Change Managment-SPRO-Shop Floor Control -System Modification  in case to trak production order change :
    A.Enhancements for Order Maintenance
            1.Enhancement for the Display/Change of Order Header Data
            2.Check Changes to the Production Order Header
            3.Checks Changes to Order Operations
    B.Enhancements for Order Change Management (OCM)
             1.Check Conflict for Change Step
             2.Definition of Comparison Fields for Order Comparison
    C.Enhancements for Order Confirmation
    Otherwise , from Basis side you can trak by
    1.ST03
    2.STAD-Provide  SAP T-code , user id , Client .Here you can find out what are the changes user did for any production order based on SAP Trxn .
    Regards
    JH

  • Send production order changes to external system IDOC

    Hi,
    I need to send production order changes to an an external system. I understand that I can trigger idocs using t-code POIT.
    but my requirement is when a order is changed, i want to trigger an IDOC to external system with the new PO data...how can I achieve this

    Hi Swathi,
    A very high level idea.
    You can use the user exit..."LXCO1U06" and call the transaction POIT in back goround and submit the idoc. This exit is used @ save of TA code CO02. Moreover as the production order can be changed through several transactions like COHV, CO40, COOIS etc....you have to check whether this exit would be applicable for all transaction.
    Regards,
    Chinna

  • AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

    Hi Experts...
    Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
    I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
    I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
    In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
    Folks need your expert comments and valuable suggestions....
    Thank You...
    Lucky

    Dear
    You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
    Refer : Re: Production order changes history
    Production orders
    Regards
    JH

  • Production Order Component Overview

    Hi All ,
    Could you please guide to understand the following will be grateful.
    In the production order component overview screen-MENU BAR is having following list
    Order, Functions, Edit, Goto, u201CCOMPONENTu201D, Environment, System, Help.
    In the above, if you left click the COMPONENT option there will be drill down option, in that there you have u201CCharacteristic Value Assignmentu201D
    u2022 What is the functionality of this option (u201CCharacteristic Value Assignmentu201D) ?
    u2022 If I select the BOM component in the component overview and I left click the COMPONENT option in the menu bar and select the u201CCharacteristic Value Assignmentu201D what will happenu2026.
    Thanks in Advance....

    Hi ,
    This is for the Component selection according to the Characteristic Value it will take you to Class to which Characteristics are
    assigned , say if your component selection based on the characteristics value say if your Hardness of the Raw material is
    99% based on that your Yield would vary for the Finished Product .
    You have created MIC 's with Hardness with characteristic value 95% , 96% , 97% and 98% etc....
    Your Quality lab has given test value for this component as 99% so your component selection will be this characteristic value
    as master data .
    Assign Characterisctics to Class , Assign class to class type 023 / 022
    Regards,
    Jayavimal

  • Deactivating production order changes after 1st operation is confirmed

    Hi,
    I want to deactivate production order changes after 1st operation is confirmed through CO11n.Ie. production order qty should not be allowed to change after 1st operation is confirmed.
    Expecting ur immense help on this.
    Regards,
    JS Karthi

    Dear ,
    PPCO0007
    EXIT_SAPLCOZV_001 Exit when saving production order
    Provide the restrictions in coding, so that when saving the order check for the order status PCNF or CNF and quantity change.
    Check thread
    first operation confimed - after system allowed changed order qty
    Regards,
    Ishwar

  • About production order change historic records

    The users want to know about production order change historic records.how can I get it, please do me a favour. Thanks.

    Hello ,
    Look into:
    SAP NOTE: 1407961 and
    History of production order changes
    Please search the forum first for such questions.
    - Pushkar
    Edited by: Pushkar Patil on Aug 6, 2010 9:56 AM

  • Production order change

    Dear All,
                      I want to restrict  the changes made to the order once it is released how can i do it?
    Vinit

    Dear ,
    What are  you looking for in production order changes ? Is it qty ? Is it Component ?
    I think you don't have to use OCM, you can also use the modification which is provide by SAP in SAP note 390635
    I hope you can restrict at user level changes in various screen variant  by appling User exit .You need to take the help of ABAPer to utilise the user exit in CO02.
    1.You may use user exit EXIT_SAPLCOBT_001 -(PPCO0007).You can make use of the exception NOT_ALLOWED_WITH_ERROR in this exit
    2.PPCO0012 Production Order: Display/Change Order Header Data
    3.PPCO0018 Check for changes to production order header
    4.PPCO0019 Checks for changes to order operations
    For farther information , you can goto  T code CMOD - Project Managment of SAP Enhancements- Click on Utilities in the menu bar - SAP Enhancements - under Exit name Give  * ,remove maximum number of hits value from 500 and execute.Select one which suits to your requirement.
    Hope this will be useful to you
    Regards
    JH

  • Production order changes Tracing

    dear all,
    in the production order how can i find out who make changes like delete materials if there are many people can use co02 , I need to make a tracing to a particular order , is there's any log to do this?
    thanks in advance
    Milad

    There is no std T code available for check the changes made in production order
    IF you want you need to activate the OCM or apply the note 390635
    please refer below thread
    Process Order Change Log history
    Re: Production Order Change Management

  • Block component in production order change: component overview

    Hi Gurus,
    I want to block the component field (set as gray field) when clicking the component overview during creation/change of production order.
    How can I configure this field and set as display only.
    Can somebody tell me how to do this? We are using 4.6C.
    Thanks in advance.
    Rgds,
    Chad

    Hi,
    Please try the following,
    In transaction BS22 choose the status CRTD & double click. Then for the business transaction "Change routing" choose the radio button "Forbid".
    Regards,
    Senthilkumar

  • Production Order Change Management

    Hi ALL,
    Dealy need of following.
    How the changes to the production order can be viewed?
    Is there any tcode to check this ?
    Regards,
    MHP

    Dear Manish,
    In a standard system it is not possible to track the changes made to a production order.
    However, this can acheived in following ways.
    1.We can develop a custom made report to track changes made to an order.Please check this with your ABAPer.
    The overview of a report will be such that one can analyse the items added,deleted,new items inserted etc.
    2.We will be able to achieve this by order change management.Refer the following link.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/41/3699761bc211d2b62b0000e8359890/frameset.htm
    Regards,
    Joseph Charles Vaikathussery

  • Production Order Component Overview (SAPLCOMK - screen 120)

    PP Experts,
    Have a requirement to add column to the component overview screen within production order create, change and display (CO01,CO02 & CO03).  In particular the column is the material master field - old material number (MARA-BISMT).
    Any suggestions how to approach this requirement?
    Thanks,
    Barry

    only ABAP can help u.
    i dont it will be big job for an abper.
    but since you are asking standard screen change..then it may ask for acess key or something...not sure.
    Pravin M.

Maybe you are looking for

  • As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

    Hi, There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying Message processing failed. Cause: javax.resource.ResourceExceptio

  • How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?

    How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?i dont want a custom one with my voice i want the pre-recorded where a lady says my number . how do i get that?

  • Failed to invoke end componentFailed to invoke method error

    I am getting this error while invoking a web service in weblogic. What is root cause of this error...? Error Description:- <remoteFault xmlns="http://schemas.oracle.com/bpel/extension"> -<part name="code"> <code>Server </code> </part> -<part name="su

  • Serializing an XML document

    Hello, I recently downloaded the Java XML Pack, which uses the Xerces2 XML Parser. A couple of questions with regards to serializing an XML document to a file: 1) Xerces1 used the org.apache.xml.serialize.* classes to do serialization (such as shown

  • Firewire thunderbolt issues

    So I'm trying to connect a PreSonus StudioLive AI to a 27 inch late 2013 iMac running 10.9.5.  There have been people on the forums at PreSonus that say it that there is an issue with Mavericks.  I've also seen a press release from PreSonus saying th