Production Order Completion date

Hi All,
   Can I know from which table can I get the production order completion date.

Priya,
There are different thoughts as you did not clearly explain what you meant by Order Completion date.
If you are looking at based on,
Confirmation then AFKO-GETRI
Goods Delivery then AFPO-LTRMI
If you are looking at Based on Status CLSD then you need to find the status change document using table JCDS-TJ02 with referance to the Object Number of the Production order from AUFK table.
Regards,
Prasobh

Similar Messages

  • SALE ORDER COMPLETION DATE

    Hi all,
               We are create one sale order in va01N after completion of all process we make a delivery entry in VL01N.We are creat morethan five deliveries.
          Any standard report to see the sale orders completed date
    ie order closed date wise report.
    Regards,
    T.Murugu

    Hi
    You can use Acceptance field at Sales Order item to enter date on which final delivery is made.
    Based on that field, we can create a Z report lisitng Customer, Order Number, and Delivery Date (Maybe more fields based on the business scenario)
    Hope you find it useful.
    Reward points if you do.
    Regards
    Ravi

  • How Production Order finish date and time is being comptued by SAP?

    Hello Expert,
    How Production Order finish date and time is being comptued by SAP? for example, we create a Production Order via CO01, the basic start date is 29.09.2008 and time is 04:00 it gives us basic finish date is 29.09.2008 and time is 13:28.
    how does SAP compute the time 13:28 as it finished time
    Please explain me briefly.
    Thanks
    Ryan

    Hello Guys,
    When we create Production Order in R/3 the time is calculated by routing but it is extended at SetUp machine time. It is not correct?. SetUp imachines time used only for first Production Order for the same product and it is plan manually, for others Production Order we need calculate time for production without SetUp machine time being pick up to compute finish time. how could we achieve this? only those Machine time will be check.
    thanks

  • Bapi to complete the Production Order completely

    Hi All,
    I am using the above Bapi to complete the Production Order completely. Now my requirement is to complete technically. I don't want to write BDC. Can anybody please let me if there is any FM to meet this requirement.
    Thanks n Regards

    used BDC

  • Profit center field in production order master data in KKF3

    Hi GUrus,
    is there any way of mass updating the profit center field in production order master data in KKF3 transaction. PLease help
    Anusha

    HI charlie,
    When i try to change the profit center, the system gave this message. We already have a profit center for a production order and we need to change the profit center, That is when we are getting the errror message.
    You have changed the profit center from AR00620800 to AR00620301. This is only allowed when the corresponding configuration was made in Customizing. Then this message is only a warning, which you can ignore.  PLease help
    Thanks
    Anusha

  • Production Order  Start Date

    Hello All,
    I am facing a problem in a Production order.When I am trying to change the  Production order Start date  and saving the changes I am getting a termination error (program termination).
    The error message is as below
    Nested call of PERFORM ON COMMIT: NESTED_PERFORM_ON_COMMIT caller: SAPLMCEX program: SAPLMCEX form: MCEXLOG_WRITE_04_DIA
    Regards
    Dhananjay

    Hi
    Check for the order scheduling parameters and confirm that the order in past are also allowed.
    Krishna

  • Reschedule strategy plan based on last actual order completion date

    Dear all,
    Hope you can help me with this one.
    We use strategybased maintenance plans. We want to achieve that the next scheduled call date is calculated taking into account the actual completion date of the last (previous) call.
    For example :
    strategy = 1 maintenance order every 52 weeks.
    start of cycle = 01.01.2009
    First call  created a mainenance order for 01.01.2010
    This order did however only get actually completed on 20.02.2010 (so actual completion date of last call = 20.02.2010 ).
    Now we want that the next call is rescheduled to 20.02.2011 ( so the last actual date + the 52 weeks from the strategy)
    This we can achieve for one maintenance plan at a time by using transaction IP10 and than the funtion "start in cycle' .
    However we want to achieve this for a mass selection of maintenance plans in one go.We cannot find a suitable transaction that does do this.
    For example IP30 simply keeps rescheduling using the "startdate of the cycle" instead of the "last actual date".
    Does anyone have a suggestion how we can solve this?
    Many thanks in advance!
    Kind Regards,
    Arjan

    Hi,
    Please follow as suggsted by BroermanG . In Addition to that please ensure that the positive & Negative Tolarance is maintained as zero value in the Scheduling Paramters of the Plan.
    Then the system will take care of your requirements. You need not use IP10 and reschedule to get the desired schedule.
    You can run the IP30 normally.
    Regards,
    MLN Prasad

  • Production order basic dates (start and finish) in past

    Hi,
    My clinet has got one requirement where in they want to create an production order with past date (Basic start and finish). I found one way to achieve this by selecting the scheduling type as "Only Capacity requirement", but the disadvantage is that the order will not get scheduled.
    Do you know any other method to achieve this functionality?
    Thanks and Regards
    Purushothaman Nagarajan

    Dear Friend,
    As i said, in Production order, under Production order - Setting - Scheduling maintain the number of days in past (says 100 days).
    Now in below select the scheduling type as backward scheduling and in Finish date give the date which is in past and now enter (or schedule the order). Because of this system will propose the start date which will also be in past.
    Regards,
    JItendra

  • Can GATP confimed date come from production order finishing date??

    Hi Expert,
    I have one question to ask.
    in the GATP , I want to the APO system can consider the production ability , that is, when I create a sales order, the system will make  a GATP check in APO, if there is no enough stock, the system will create a PPDS planned order and return the planner order finsihed date as the schedule line confirmed date.
    I do not know this is possible or not??
    I hope some expert can help me to solve this problem
    thank you in advance!

    Hi Liu,
    Why Planned order date.. It could be Production order date (planned order release date) + inhouse production time + Transporation lead time + GR processing time (at the original location where the order is placed) ..that should determine the material availability date. CTP exactly does this. Make sure that the "replenishment lead time is switched off" in the product-location master (in fact this is location independent)- as this take precedene over everything else.
    Also ensure that that end of checking horizon is larger than the interval established above, else MAD could be much earlier. Also enure that transfer of requirements is set both at header and schudule line level for CTP to work.
    Regards,
    Loknath

  • Production Order Change Date and Timestamp

    Hi, While trying to change the quantity and date of a production order I want to capture the date and timestamp of the change time.
    Please let me know which table or function module can be used for this. Thanks.

    Check AUFK-->AEDAT
    Regards
    AM

  • Production order start date gets incremented by 1 day

    Hi,
    I have a scenario where in when the Planned Order gets converted to Production Order the Start date gets incremented by 1 day.
    If the planned order date is 11.02.2009 after converting to Prod Order it shows the start date as 12.02.2009.
    Can any please help me in resolving this issue,
    with rgds
    Ranjith Singh

    Dear,,
    Please run the MRP MD02 with Scheduling- 2 Lead time scheduling.
    Planeed order date may be from in house production time which is lot size independent.
    But production order date is from routing time which are lot size depnendent.
    Hope clear to you or come back if any problem.
    Regards,
    R.Brahmankar

  • Production order control data tab

    Hi,
    Is there any chance the costing data under control data tab in production order can make out "grayed" so that users can not change costing sheet, RA key.
    Thanks in advance.

    Dear Sprint,
    Try with SHD0, make the field as display only
    [http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    [http://sapfunctional.com/General/ScreenVariants/Index.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fb015111d396480000e82de14a/content.htm]
    If possible take help from technical person
    Regards
    Madhu

  • Production order TECO date..

    Hi All,
    I want to see the TECO date of production order.
    How I can see ?
    Thnx n Rgds,
    Bharat

    Hi Bharat,
    Go in coois in that select list at Header level and status profile as standard Profile and put that order number in order and execute the program you get list in that go in change layout in that select change date and add in column and enter you get the date on which teco was done for that order you also select the Entered By that by same way this is person who done the teco.
    For Error "Change document not active for order" go in T.code OPL8 in that select your order type and plant combination in that on IMPLEMENTATION tab in that active status change document for your order type then this error not come and you see the status changes in the order itself.
    Hope this will solve your problem and reward with point.
    Regards,
    Rajesh Tayade

  • Production order - post date - cannot change

    Hi,
    could anybody, especially from SAP, explain me the background and reason, why user cannot change the PostDate field in OWOR table of production order after the order is created?
    And seccond related question is, why item gen. entry and exit are with date, which is in production order as PostDate and user cannot change it as well?
    Real situation:
    User creates production order and sets as postdate April 2008. PM will order the material necessary for this production order and the material will arive to the stock at the end of May. At the end of May is posting period for April blocked already.
    So now user has no chance without opening the posting period to finish the production order.
    Opening and blocking posting period isnt solution for user. Im asking, because now we are implementing new customer and I know, that there will be the same problem and I would like to solve it before he will start.
    Thanks a lot for make it clear for me.
    Petr
    Edited by: Rui Pereira on Aug 6, 2008 4:03 PM

    Dear Petr Verner,
    1st to clarify your question currently It is not possible to change the Order Date ( Posting Date) for the production order ( to set as "Yes" in OWOR).
    2nd, For any change you need in the system behavior, you need to go through Note: 1028874, and post the message accordingly.
    3rd on UDF ( User Defined Field), I suggested you to attach and UDF for the Production order (UDF as Date format), and you can record the changes ( date when you want the order to be changed).
    Note:- UDF will not effect accounting, but only for record and information purpose.
    4th As I understand form your example, you say that An Production order A created in April, its Child Items comes in May.
    Later you make Issue for Production. Which you say the JE for Issue for production will happen in April ( though the goods have come in May).
    And Receipt for Production will happen in May, which is ok.
    Please clarify the 4th point.
    Regards,
    Raghu N
    SAP Business One Forums Team

  • Production order finish date

    While creating a production order  I  am using forward scheduling order start date is today and finish date proposed by the system is 07.02.2011 but the problem is in house production time is 10 days. then why the system has proposed finish date as 07.02.2011 instead of 14th or 15th or 16th

    Dear Kumar,
    Always system picks the timings from routing when you create production order manually
    System will not check the filed in house production time from material master while creation of production order
    So check in routing, for the timings that you have given
    It will solve your issue
    Regards
    Madhu

Maybe you are looking for

  • How do i change the wmode to GPU for all flash?

    I was having lag issues for weeks now.. I started fiddling on the settings with a script called youtube center, I changed the wmode to GPU and the lag issues went away completely. The problem is... i need to do this to every flash video sites beause

  • Customer Balance upload vs Vendor balance upload --- URGENT!!!!!!!!!!!!!

    Hi Peers I want to know the difference between Customer Balance upload and Vendor balance upload. How do you upload transactional data upload. If any boby have any documnets for this plz fwd it to me. My email id is [email protected] Its very very ur

  • When I start Firefox, one tab overwrites another.

    Many times when I open Firefox, one of my open tabs loads as something that is or has been in a different tab. (Usually it's something that's currently open, but occasionally it's something that's been open in the last couple of days.) The tab histor

  • Fatal .psd corruption on PS CS6 Trial

    Hi! I'm just testing out the PS CS6 trial version and something weird is happening. Suddenly my .psd got "corrupted" although it's not a big file with many layers. So I want to know if there's some general incompatibility with my rig and PS CS6 (comi

  • NullPointerException creating TopLink objects

    Hello, I'm developing an application with JDeveloper 10g, which uses an Oracle 8.1 database. At the beginning I try to create the Data Model using TopLink. I select two tables that I want to be represented as TopLink objects. But just after I click "