Production Order Component Batch Assignment Enhancement Needed

Dear Experts,
In a Production Order CO01/CO02 under Components you could assign Batches to a Component/Material. To do this in the Production Order screen click Component Overview button and then select a Component/Material and click Batch Assignment Button. You would be now in u2018Maintain Batch Fixed Reservationsu2019 screen. Here you find right below the u2018Batchesu2019 screen. Where Batches to be assigned to Component are found, I need to add a Column to this Screen and populate at the time when Batch Assignment Button is clicked. I went through all enhancements of Production Order and could not locate any. Please let me know if you find one that could modify the u2018Batchesu2019 screen.
If you are unable to find one to help youu2019ll further there is an Application Toolbar button called u2018Customer exitu2019 in u2018Maintain Batch Fixed Reservationsu2019 screen and I am unable to locate the Enhancement for this Button.
Thanks,
Sri

Had to close because of Rules

Similar Messages

  • Production order component batch determination : Over delivery allowed in b

    Iu2019m using production order component batch determination in CO02. System is not allowed to allocate an excess component split batch quantity. System is always allowed to allocate exact requirement quantity where to make open quantity is 0.
    It generates the following massage once click enter after selecting an excess component quantity. My requirement is to add the excess quantity in component batch determination.
    Massage details:
    Quantity of batch 0052902459 is reduced to 9.300 KG as split qty > req. qty
    Message no. LB034
    Diagnosis
    The split quantity of the chosen batch has lead to the split quantity total exceeding the required quantity.
    System Response
    The quantity is rounded down by the system.
    Procedure
    An overdelivery is not allowed by the current business transaction.
    Procedure for System Administration
    If necessary, check the batch search strategy to see whether an overdelivery is allowed.
    I have maintained the configuration in transaction COB1 as follows to enable over delivery batch determination.
    Strategy type: CO01- OrdType/Plnt/Matl
    Key combination:     Order type
    Over delivery allowed in batch determination: Tick on
    Please let me know the configuration to enable to do component batch determination with minus open quantity (Excess component quantity)

    Hi,
    As I understand it seems that you do not have batch split allowed in the auto batch determination for component materials. And you need to have batch split on a need to basis?
    If thats true, then on the line item in the component overview. Select the item details for the Batch that has been determined (general view, there is a field for split in terms of %, change that from 100% to a the lower value you want to pick from that batch). It should then allow you to add more batches.
    let me know if my assumption and answer helps.

  • Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

    I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order.  Can you pl. tell me how to configure this scenario.
    Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
    Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

    Hi,
    Automatic Batch Determination for production order components is possible by configuration.
    You can also refer below discussions to map your scenario.
    Batch determination in production order | SCN
    Automatic Batch Determination in Production order
    Regards,
    Naresh

  • FM or BAPI for production order component split batch

    Hi,
    I'm trying to split a production order component quantity into batchs with FM or BAPI.
    Using BAPI_ALM_ORDER_MAINTAIN i can create or modify components but i can't set field split batch flag SPLKZ and reference SPLVR.
    Can you help me?

    In standard product order process in CO02 when i split material with standard function I obtain several lines. These new lines refer to the originale one by fields SPLVR and SPLKZ.
    Eg. In operation 0010 i've 10 PC of MATERIAL1
    Item
    Material
    Qty
    Batch
    Batch Key (SPLKZ)
    Itm no stock (SPLVR)
    0010
    MATERIAL1
    10 PC
    In CO02 i take MATERIAL1 from BATCH1 and BATCH2 the final result is
    Item
    Material
    Qty
    Batch
    Batch Key (SPLKZ)
    Itm no stock (SPLVR)
    0010
    MATERIAL1
    1
    1
    0010
    MATERIAL1
    7 PC
    BATCH1
    2
    1
    0010
    MATERIAL1
    3 PC
    BATCH2
    2
    1
    So I'm trying to reproduce this standard behavior with BAPI or FM.
    Thaks

  • Adding new column in production order component overview

    Hi Experts,
    Please let me know any enhancement or badi available to add a new column to production order component list. There is a business requirement to display the fixed bin in component list.
    THanks
    RIjil

    Sudhakar,
    Check the MRP parameter 'Individual/Coll' in MRP4 view for the components. This should be set as 2 for collective planning. If this flag is left blank then planning will be based on the parent material (If the parent material is planned for special stock then the components will also be planned for special stock)
    Let me know if this helps.
    Thanks,
    Jaison

  • Production Order Component Overview

    Hi All ,
    Could you please guide to understand the following will be grateful.
    In the production order component overview screen-MENU BAR is having following list
    Order, Functions, Edit, Goto, u201CCOMPONENTu201D, Environment, System, Help.
    In the above, if you left click the COMPONENT option there will be drill down option, in that there you have u201CCharacteristic Value Assignmentu201D
    u2022 What is the functionality of this option (u201CCharacteristic Value Assignmentu201D) ?
    u2022 If I select the BOM component in the component overview and I left click the COMPONENT option in the menu bar and select the u201CCharacteristic Value Assignmentu201D what will happenu2026.
    Thanks in Advance....

    Hi ,
    This is for the Component selection according to the Characteristic Value it will take you to Class to which Characteristics are
    assigned , say if your component selection based on the characteristics value say if your Hardness of the Raw material is
    99% based on that your Yield would vary for the Finished Product .
    You have created MIC 's with Hardness with characteristic value 95% , 96% , 97% and 98% etc....
    Your Quality lab has given test value for this component as 99% so your component selection will be this characteristic value
    as master data .
    Assign Characterisctics to Class , Assign class to class type 023 / 022
    Regards,
    Jayavimal

  • I have change some fields in  (Production order component )

    I have change some fields in (Production order component overview)

    Hi,
    do you want to hide or disable the fields or add new fields ??? by the way can you please let us know the transaction that you are referring to ??
    Regards,
    Santosh

  • Default Production Order Component Long Text

    Dear guru ,
    Whose are the defaults for production order component long text ?
    Can I copy this text only from bom ?
    Can I copy this text also from material master ?
    Thanks

    Hi,
    The defaults are from the BOM item text 1 & 2. POTX1 & POTX2 fields.
    I suppose no option from material master.
    Hope this helps
    Regards
    Raju

  • Linking Goods Receipt to Production Order Component

    Hi,
    I would like to ask if there is a link between materials which have been goods receipts (movement type 101, 501) to the materials or components used in production orders (table resb). Materials with zero inventory cannot be used for production orders, so a GR is needed. Once the GR is done, the material is made available. From a technical standpoint, how do we link this? MKPF, MSEG are some of the tables used.
    Thanks.

    Hi ,
    try this BAPI BAPI_PRODORDCONF_GETDETAIL u need to pass confirmation number to it , then it will display Mat.Docs.
    Regards
    Prabhu

  • Production Order Component long text

    I'm an ABAPer trying to find the long text of a production order component.
    I'd expect to find it as a text with object "AUFK" id "MATK" but that's not the case. I can't find it anywhere in table STXH where it would show up if it were kept like any other text. So where is it kept?

    Whenever you maintain a Production Order Text in CO03, system generate a unique HEADER details for that particular text with unique values of fields-Text Name, Language, Text ID & Text Object.
    You can see 4 unique values by first double clicking on Production Order Long Text and then Goto --> Header.
    Once you've these values, run FM- READ_TEXT (transaction-SE37) and put Text Name, Language, Text ID & Text Object at required places and execute, you will get desired Accounting Text.
    Regards,
    Anup

  • Function about production order component material

    WHO can tell me the function about  production order component material?
    When import production order number , the function export tables about component material.

    Hi!
    you can use FM CO_SF_RESB_READ
    or directly from RESB table
    select single rsnum  into lv_rsnum from AFKO where  aufnr = aufnr.
        SELECT * FROM resb INTO TABLE lt_resb WHERE  rsnum =lv_rsnum AND xloek NE 'X' .

  • Production Order Component configuration

    Greetings Experts,
    On the Production Orders created, we want to be able to change the component (delete existing & add a new one) to a configurable one. Hence the need to be able to configure/edit char values for the newly added component.
    I know standard SAP does not allow this, anyone in their experience knows if this is possible in DIMP/IS Mill function?? We are using the IS-Mill function. Even if not possible with standard, is there a way to open up the configuration via an enhancement?
    Thanks

    Hello,
    Thanks, but the problem is not with the Planning run.
    Display of dependent requirements in MD04 is the Problem..
    For eg.,
    A is the header material and B is the component.
    For the Production Order of A, the component quantity of B is 800mm.
    in MD04 of B, the OrdRes is not shown as 800mm.
    (some back ground: System is suggesting the quantity 800mm based on Object dependencies).
    But in BOM of A, we have defined the quantity B as 50,000mm.
    So, in MD04 of B, it is showing as 50,000mm instead of 800mm.
    Thanks for your interest..
    Best Regards,
    Siva

  • Production order backflush - Batch determination

    Hi,
    We are following discrete manufacturing with backflush setup for auto GI of materials.
    The entire flow is functioning smoothly, like
    1. Creation of production order & release to production.
    2. Auto goods issue upon first operation confirmation.
    The qty of goods issue is automatically taken from component qty in the order. This works fine for some materials with out any Batch information.
    Where as for those materials require match information, upon order confirmation system throughs an error
    1. "Error in material 75-106674A41 order 8200019041 item 0001"
    2. "Enter Batch"
    Confirmation is through, after we enter the batch details manually.
    How to auto determine  the batch information. Is there any setting that will eliminate the manual batch input.
    Please help and provide me  the steps / setup required to AUTO select the batch details.
    Thanks in advance.
    Raj.

    Hi,
    you have to configure the foll settings in IMG for the batch determination to happen automatically.
    IMG – Logistics general - Batch management – Batch determination & batch check  – strategy types
    1.Define prod order strategy type –
       (you can use CO01 - assign Class type : 023  & name of the class here , also assign sort rule created in step4 CU70 here )
    IMG – Logistics general - Batch management – Batch determination & batch check  – Batch search procedure definition
    2.Define Prod order search procedure (you can use CO0001 in std)
    IMG – Logistics general - Batch management – Batch determination & batch check  –
    Batch search procedure allocation & Activation check
    3.Assign the search proc to prod order and activate check (same as OPL8)
    IMG – Logistics general - Batch management – Batch determination & batch check  – Define sort rules
    4. Create sort sequence CU70
    5. Create Batch search Strategy  COB1 & Assign Sort rule here
    Now you can trigger batch determination in Prod order.
    Regards,
    Sheik

  • Production Order - component Table

    Hi
    My is as follow , I need fetch details of Overview of Components in Production Order ( Co01). Kindly let me know the table for Components Overview table . But not BOM Table
    with regards
    Anand kumar

    AUFG                           Allocation Table Sub-Item, Store Group
    AUFI                           Allocation Table, Document Sub-item, Store
    AUFK                           Order master data
    AUFLAY0                        Entity Table: Order Layouts
    AUFLAY1                        Layouts for the Orders
    AUFLAY2                        Order Master Data Maintenance: Tab Names
    AUFLAY3                        Assignment Subscreens: Screens for Order
    AUFM                           Goods movements for order

  • Material to be produce included in production order component review

    Hello gurus, i have a issue about production order.
    1. The BOM of XXXX material have the next components:
        A
        B
        C
    2. When i create a production order for 100 ST of  XXX material, the component review in production order includes the next:
      Position  Material  Quantity
      0000      XXXX        100 (row blocked)
      0010     A                  20 ST
      0020     B                   1.5 KG
       0030    C                    10 ST
    3. I don´t know why the component review in production order includes the position 0000 and blocked. It looks like the BOM of XXXX material have a recursive position, but isn´t real.
    Please, help me with this issue
    Regards,
    Johnny Leguia

    The issue was solved.
    The co-producto indicator in a BOM position makes that all co-product materials (that hace co-product indicator in mrp view) were listed in component overview. The material to be produced had this co-product indicator in mrp view.
    Thanks for help.
    Regards,
    Johnny Leguia

Maybe you are looking for

  • Publishing a web album to an existing site (non MobileMe)

    I'm a complete newbie to iMac, and iWeb. I have an existing website to which I'd like to publish a photo gallery. Can I do this in iWeb? So far I can only see how to publish to a MobileMe site which I'm not interested in getting. Any help would be ap

  • Cannot join wi fi network

    I've been having problems ever since updating to 7.02.  Now I can't join a Wi Fi network that I've been using all along.  Any help?

  • Redirecting XSLT output to multiple files

    Hi, I am trying to redirect the output of the XSLT into multiple files using <xsl:variable name="filename" select="concat(@id,'.xml')" /> <redirect:write select="$filename"> </redirect:write>I dont want to hard-code the directory of the $filename in

  • X server restarts - I think - no regular intervals

    Hi, Just finished the installation of Arch on my new computer. The most important part of the new computer is the AMD HD7850 graphic card. I am running KDE. When I first installed it, I had the KDE 4.9.5 on it. However, I noticed that after a certain

  • Conversion Routine

    Hello Gurus. I have the data in the infoobject. But i didnt put "ALPHA" in the converstion routine. there is one transaction code by which i can set the "ALPHA" "RSMDEXITON" . i executed that function. But when i went to see in the obect definition i