Production Order Configuration data

Hi All..
I need to display the Configuration data (Char Description and values) of Production Order into the smart form.
(Path : CO03>Enter Prod Order No>Header->Configuration )
Functional Consultant told me to use Function Module "CUCB_CHANGE_CONFIGURATION".
But its giving RunTime Error.
Presently, the configuration data is retrieved from Sales Order using Functional Module "VC_I_GET_CONFIGURATION"..
Please help me out to fetch the data from this path into an internal table....
(Path : CO03>Enter Prod Order No>Header->Configuration )
Regards
Pavan

check this
CO_OCC_DISPLAY_CONFIGURATION
this FM used in that CO03 program itself.
put a break-point over here then debug the system.This FM also using the same VC so i think u are not passing req.params
check this Include program which has all Fms for Config.data.
<b>LCEI0UXX</b>
Regards
Prabhu

Similar Messages

Profit center field in production order master data in KKF3

Hi GUrus,
is there any way of mass updating the profit center field in production order master data in KKF3 transaction. PLease help
Anusha

HI charlie,
When i try to change the profit center, the system gave this message. We already have a profit center for a production order and we need to change the profit center, That is when we are getting the errror message.
You have changed the profit center from AR00620800 to AR00620301. This is only allowed when the corresponding configuration was made in Customizing. Then this message is only a warning, which you can ignore. PLease help
Thanks
Anusha

How Production Order finish date and time is being comptued by SAP?

Hello Expert,
How Production Order finish date and time is being comptued by SAP? for example, we create a Production Order via CO01, the basic start date is 29.09.2008 and time is 04:00 it gives us basic finish date is 29.09.2008 and time is 13:28.
how does SAP compute the time 13:28 as it finished time
Please explain me briefly.
Thanks
Ryan

Hello Guys,
When we create Production Order in R/3 the time is calculated by routing but it is extended at SetUp machine time. It is not correct?. SetUp imachines time used only for first Production Order for the same product and it is plan manually, for others Production Order we need calculate time for production without SetUp machine time being pick up to compute finish time. how could we achieve this? only those Machine time will be check.
thanks

Need to retrieve Order Configuration data in Userexit.......

I need to pull out order Configuration data while creating the order. I neead to check whether there are any orphand condition there on the order so basically i need to check the values of the table IBIN, IBINVALUES & IBSYMBOL at runtime while creating the Order......
can anybody pls help me out.....

Any body know how to pull the order configuration data in VA01 userexits ???

Production Order Completion date

Hi All,
Can I know from which table can I get the production order completion date.

Priya,
There are different thoughts as you did not clearly explain what you meant by Order Completion date.
If you are looking at based on,
Confirmation then AFKO-GETRI
Goods Delivery then AFPO-LTRMI
If you are looking at Based on Status CLSD then you need to find the status change document using table JCDS-TJ02 with referance to the Object Number of the Production order from AUFK table.
Regards,
Prasobh

Production Order Start Date

Hello All,
I am facing a problem in a Production order.When I am trying to change the Production order Start date and saving the changes I am getting a termination error (program termination).
The error message is as below
Nested call of PERFORM ON COMMIT: NESTED_PERFORM_ON_COMMIT caller: SAPLMCEX program: SAPLMCEX form: MCEXLOG_WRITE_04_DIA
Regards
Dhananjay

Hi
Check for the order scheduling parameters and confirm that the order in past are also allowed.
Krishna

PRODUCTION ORDER CONFIGURATION STEPS

Dear Guru's
Please give some standard steps to complete production order cycle in IDES 4.6
Thanks a lot in advance
shankar

Hi,
Define Order Type-
IMG > Production Planning for Process Industries > Process Order > Master Data > Order > Define Order Type
Define Order Type Dependent parameters u2013
IMG > Production Planning for Process Industries > Process Order > Master Data > Order > Define Order Type Dependent parameters
Define Production Scheduler u2013
IMG > Production Planning for Process Industries > Process Order > Master Data > Bill of Material > Define Production Scheduler
Define Checking Control - Production Order
Define Availability Check u2013 Define Checking Control u2013
IMG > Production > Production Order > Operations > Availabilty Check > Define Checking Control
Define Checking Rule for backorder processing u2013
IMG > Production > Production Order > Operations > Availabilty Check > Define Checking rule for back order processing
Specify Scheduling Parameters u2013
IMG > Production > Production Order > Operations > Scheduling > Specify Scheduling Parameters
Define Reduction Strategy u2013
IMG > Production > Production Order > Operations > Scheduling > Define Reduction Strategy
Define Order Confirmation u2013
IMG > Production > Production Order > Operations >
Confirmation > Define Confirmation Parameters.
Define alternative determination of Production u2013
IMG > Production > Production Order > Operations > BOM selection > Define alternate determination of production
Define no. ranges u2013
IMG > Production > Production Order > Master data > Order > Number Ranges > Define number ranges for orders
Hope it will work for you.
Regards,
R.Brahmankar
Reward if useful

Production order - Master data explosion date

Dear Team,
I am creating the production order in CO01. While creating the production order, i am choosing the backward scheduling. Since i have selected the backward scheduling, i have given the finish date as "27.02.2012". And in the tab "Master Data", i was refering the field "Explosion Date". The explosion date is been displayed as 20.02.2012 (Routing and BOM explosion date).
How this explosion date been determined based on the scheduling types (forward scheduling, backward scheduling)?. Is any configuration to be done to calculate this explosion date?
What is the importance of explosion date in production order? will it affect the production order? Because in my production order the explosion date occurs in future ie, 20.02.2012. (as mentioned above).
thank you
psk

Dear PSK,
The explosion date refers to the date when the BOM & Routings are exploded on the orders i.e. applied. The explosion date can be controlled based on the settings in the SPRO.
Go to SPRO - Production - MRP - Plant parameters - Carryout overall maintenance for plant parameters (Transaction: OPPQ).
In the plant pameters for a particular plant and in the tab 'BOM Explosion' we can determine how the system should can calculate the explosion date.
Explosion date is controlled based on the order start date or finish date. If the production order is added manually the system determines the explosion date as follows:
Case 1:
If you have specified the order start date on order creation the system takes this date as the explosion date for the bill of material.
Case 2:
If you have specified the order finish date on order creation the system calculates the explosion date from the order finish date minus the in-house production time defined in the material master.
As per your example it looks like in your system the explosion date is controlled by the 'Start Date' due to which the explosion date equals the order start date.
Hope this is helpful. Pl let me know if you need further help.
Thanks,
Satya

Production order basic dates (start and finish) in past

Hi,
My clinet has got one requirement where in they want to create an production order with past date (Basic start and finish). I found one way to achieve this by selecting the scheduling type as "Only Capacity requirement", but the disadvantage is that the order will not get scheduled.
Do you know any other method to achieve this functionality?
Thanks and Regards
Purushothaman Nagarajan

Dear Friend,
As i said, in Production order, under Production order - Setting - Scheduling maintain the number of days in past (says 100 days).
Now in below select the scheduling type as backward scheduling and in Finish date give the date which is in past and now enter (or schedule the order). Because of this system will propose the start date which will also be in past.
Regards,
JItendra

Can GATP confimed date come from production order finishing date??

Hi Expert,
I have one question to ask.
in the GATP , I want to the APO system can consider the production ability , that is, when I create a sales order, the system will make a GATP check in APO, if there is no enough stock, the system will create a PPDS planned order and return the planner order finsihed date as the schedule line confirmed date.
I do not know this is possible or not??
I hope some expert can help me to solve this problem
thank you in advance!

Hi Liu,
Why Planned order date.. It could be Production order date (planned order release date) + inhouse production time + Transporation lead time + GR processing time (at the original location where the order is placed) ..that should determine the material availability date. CTP exactly does this. Make sure that the "replenishment lead time is switched off" in the product-location master (in fact this is location independent)- as this take precedene over everything else.
Also ensure that that end of checking horizon is larger than the interval established above, else MAD could be much earlier. Also enure that transfer of requirements is set both at header and schudule line level for CTP to work.
Regards,
Loknath

Function Module for Production order configuration

Hi,
I have variant configuration scenario.
I have to run the transaction CO01 in the background.
Is there any Function module, by which i can configure the production order in the back ground.
As of now, when i am doing it manually but not able to find any BAPI for that.
any help will be highly appreciated !!
Thnx in Advance
Ashish

Hi,
try BDC
Pls refer below link
http://www.sap-img.com/bdc.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/309cb157-738d-2910-7691-b74c4ddba3c7
Regards,
Sankaran

Production Order Change Date and Timestamp

Hi, While trying to change the quantity and date of a production order I want to capture the date and timestamp of the change time.
Please let me know which table or function module can be used for this. Thanks.

Check AUFK-->AEDAT
Regards
AM

Production order start date gets incremented by 1 day

Hi,
I have a scenario where in when the Planned Order gets converted to Production Order the Start date gets incremented by 1 day.
If the planned order date is 11.02.2009 after converting to Prod Order it shows the start date as 12.02.2009.
Can any please help me in resolving this issue,
with rgds
Ranjith Singh

Dear,,
Please run the MRP MD02 with Scheduling- 2 Lead time scheduling.
Planeed order date may be from in house production time which is lot size independent.
But production order date is from routing time which are lot size depnendent.
Hope clear to you or come back if any problem.
Regards,
R.Brahmankar

Production order control data tab

Hi,
Is there any chance the costing data under control data tab in production order can make out "grayed" so that users can not change costing sheet, RA key.
Thanks in advance.

Dear Sprint,
Try with SHD0, make the field as display only
[http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
[http://sapfunctional.com/General/ScreenVariants/Index.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fb015111d396480000e82de14a/content.htm]
If possible take help from technical person
Regards
Madhu

Production order TECO date..

Hi All,
I want to see the TECO date of production order.
How I can see ?
Thnx n Rgds,
Bharat

Hi Bharat,
Go in coois in that select list at Header level and status profile as standard Profile and put that order number in order and execute the program you get list in that go in change layout in that select change date and add in column and enter you get the date on which teco was done for that order you also select the Entered By that by same way this is person who done the teco.
For Error "Change document not active for order" go in T.code OPL8 in that select your order type and plant combination in that on IMPLEMENTATION tab in that active status change document for your order type then this error not come and you see the status changes in the order itself.
Hope this will solve your problem and reward with point.
Regards,
Rajesh Tayade

Production Order Configuration data

Similar Messages

Maybe you are looking for