PRODUCTION ORDER CONFIGURATION STEPS

Dear Guru's
Please give some standard steps to complete production order cycle in IDES 4.6
Thanks a lot in advance
shankar

Hi,
Define Order Type-
IMG > Production Planning for Process Industries > Process Order > Master Data > Order > Define Order Type
Define Order Type Dependent parameters u2013
IMG > Production Planning for Process Industries > Process Order > Master Data > Order > Define Order Type Dependent parameters
Define Production Scheduler u2013
IMG > Production Planning for Process Industries > Process Order > Master Data > Bill of Material > Define Production Scheduler
Define Checking Control - Production Order
Define Availability Check u2013 Define Checking Control u2013
IMG > Production > Production Order > Operations > Availabilty Check > Define Checking Control
Define Checking Rule for backorder processing u2013
IMG > Production > Production Order > Operations > Availabilty Check > Define Checking rule for back order processing
Specify Scheduling Parameters u2013
IMG > Production > Production Order > Operations > Scheduling > Specify Scheduling Parameters
Define Reduction Strategy u2013
IMG > Production > Production Order > Operations > Scheduling > Define Reduction Strategy
Define Order Confirmation u2013
IMG > Production > Production Order > Operations >
Confirmation > Define Confirmation Parameters.
Define alternative determination of Production u2013
IMG > Production > Production Order > Operations > BOM selection > Define alternate determination of production
Define no. ranges u2013
IMG > Production > Production Order > Master data > Order > Number Ranges > Define number ranges for orders
Hope it will work for you.
Regards,
R.Brahmankar
Reward if useful

Similar Messages

Product costing by sales order configuration steps

hi
plz send me product costing by sales order configuration steps.
sir, i know manufacturing order configuration step but i do not sales order configuration.
in the sales order also is same as manufacturing order like first we have to make planning cost , the planning cost should be updated to material master and next configure the actual cost.
for first step- costing variant -okkn
next -costing variant -opl1
for sales order also same we need to update planning price first- what is costing variant
for actual cost - what is costing variant
plz tell me detail
regards,
sowmya
Moderator: Please, read forum rules before posting

Hi Sashikanth,
Please send me the Configuration document for make to sales order.We are at Blue print stage need some docment for make to sales order.Plese send me the document it will will be very help full for me.
My id is [email protected]
Thanks in advance
Regards,
Nagaraju
Edited by: nagaraju sami on Mar 9, 2008 11:58 AM

Variant Configuration: Update of Production Order Configuration

We have a requirement, where sales order configuration is changed, this configuration change should get updated
in the production order {updated configuration change is inturn used for printing of shop floor papers}.
Currently, Based on sales order configuration change, configuration change is not updated in the production order,
leaving us no choice but back out the production orders and redo it again {something we would like to avoid}.
In the production order, under header, there is CHANGE CONFIGURATION menu, which is greyed out, can this be activated?

please investigate the use of OCM (order change management). It seems to provide solution to your requirement.
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/a5/63198843a211d189410000e829fbbd/frameset.htm]
Please note that there is a few steps in configuration to be made before it is working. Namely, Overall change profile (OPL9), and Change profile (OPL7).
Rgrds,

Production Order Deletion:steps involved

hi! experts,
just wanna know the steps involved in deletion of an Production order(transaction wise).
thanks in advance.
Rishi

Rishi,
CO78 is a one stop transaction for production order setting deletion flag, deletion indicator, archiving and finally deleting.
Generally we schedule the following programs in background in the sequence below,
1. PPARCHP1 for Setting Deletion Flag
2. PPARCHP1 for Setting Deletion Indicator (Once set cannot be revoked- so care should be taken in selection of orders)
3. PPARCHA1 for archiving the production order with Deletion Indicator active. Basis should set the database/storage space for archiving/storing the records.
4. PPARCHD1 for Deleting the records from SAP database.
Regards,
Prasobh

Function Module for Production order configuration

Hi,
I have variant configuration scenario.
I have to run the transaction CO01 in the background.
Is there any Function module, by which i can configure the production order in the back ground.
As of now, when i am doing it manually but not able to find any BAPI for that.
any help will be highly appreciated !!
Thnx in Advance
Ashish

Hi,
try BDC
Pls refer below link
http://www.sap-img.com/bdc.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/309cb157-738d-2910-7691-b74c4ddba3c7
Regards,
Sankaran

Production Order Configuration

Dear Experts,
We are currrently following this process for Production Order.
CO01 - Create Prd Ord
CO02 - Release Prd Ord
CO15 - Confirm Prd Ord
MB31 - For producing Parent Item (mvmt typ - 101)
MB1A - For consuming child items (mvmt typ - 261)
I would like to know how I can configure the system such that the prod ord gets closed (TECO) once the parent is produced and child items are consumed? Also I want to make sure that child items gets consumed from the same plant where the production order was created.
Please suggest..
Thanks,
Bhavin Shah

Hi,
I assume that you have configured the Order Type, its dependent parameters / confirmation parametres and scheduling parameters.
The transactions which you have mentioned are standard part of Discrete Manufacturing.
Once the confirmation / goods issue / goods receipt is completed you can set the Status of the Order as TECO, which you need to do it manually. If you want to do it automatically then you need to create a Z development where it can the Production Order Status and if the status is DLV / CNF you can code to change the status as TECO. Those TECO orders can be further taken up for Settlement.
As you are mention the Plant during creation of Production Order (thru the order type config) you ned not worry about the Goods issue will be performed from other plants. For your confirmation goto the Production order and Click the Component Overview and check the Plant and storage location of BOM items it will be shoeing the same plant as the Order Header material.
Hope this will help you.
regards
radhak mk

Production Order Configuration data

Hi All..
I need to display the Configuration data (Char Description and values) of Production Order into the smart form.
(Path : CO03>Enter Prod Order No>Header->Configuration )
Functional Consultant told me to use Function Module "CUCB_CHANGE_CONFIGURATION".
But its giving RunTime Error.
Presently, the configuration data is retrieved from Sales Order using Functional Module "VC_I_GET_CONFIGURATION"..
Please help me out to fetch the data from this path into an internal table....
(Path : CO03>Enter Prod Order No>Header->Configuration )
Regards
Pavan

check this
CO_OCC_DISPLAY_CONFIGURATION
this FM used in that CO03 program itself.
put a break-point over here then debug the system.This FM also using the same VC so i think u are not passing req.params
check this Include program which has all Fms for Config.data.
<b>LCEI0UXX</b>
Regards
Prabhu

Product costing configuration steps plz

MODERATOR: All points have been UNASSIGNED and the thread LOCKED. Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email. Thank you for your assistance.
HI guru's,
Could u Plz any can send me Product Costing & Product Cost Controlling Step by step Configuration.. to this maild id ...Points will be rewarded for the earliest reply . kambagiri at yahoo
regards

give correct ID
yahoo dot com
or yahoo dot co dot in

Product costing configuration steps

HI guru's,
Could u Plz any can send me Product Costing & Product Cost Controlling Step by step Configuration.. to this maild id ...Points will be rewarded for the earliest reply .
regards

hi
Product costing documentation
http://www.sap-topjobs.com/SpecialPP/746.html
product cost controlling documentation
http://help.sap.com/saphelp_nw04/helpdata/en/37/dc143c65b8b800e10000000a114084/frameset.htm
Hope this helps...
nagesh

Email trigger whenever Production order release step by step settings

Hi All,
Step by step procedure for email generation when ever prod order is released.

http://www.****************/Tutorials/Workflow/SChng/SChng.htm

To include sales order/ production order characteris in COOIS

Hi,
We are using Variant configuration in our project.
In COOIS transaction, we need to include the sales order/ production
order (configuration) characterisitcs in the output screen.
We may need around 20 characterisitcs from sales order/ production
order to be displayed.
Kindly help us on how to add these fields.
Also,we are looking for characteristics in input selection screen of
COOIS.
Thanks & Regards,
Atul.

Hi
See these notes
SAP Note 615206 - COOIS: BAdI order delay in IOHEADER
SAP Note 806375 - COOIS: Order delay Business Add-In in IOHEADER
SAP Note 615176 - COOIS: BADI for predecessor status
SAP Note 434123 - Filling and displaying own fields in information system
SAP Note 363327 - COOIS/CO26/CO28: Change list of fields that can be displayed
I hope this helps you
Regards
Eduardo

Create a production order with variant configurator data

Hello,
Can anyone tell me the way to create a production order with variant configurator data. Is there a BAPI ? an IDOC ?
Is there several steps ?
I have to create an interface which creates automatically PP orders. The data input is a file.
Thanks for your help

Hi,
There are fews BAPI's available for creation of Production Order. They are:
BAPI_PRODORD_CREATE
This bapi will suit to your requirement, as input will be provided from file.
Others are
BAPI_PRODORD_CREATE_FROM_PLORD " this converts planned order to production order
BAPI_PRODORD_CREATE_FROM_REF " this creats production order considering other production order as reference.
Hope your query is answered.
Regards,
Brajvir

Batch determination of configurable materials in production order

Dear All,
I'm facing the follwoing problem i have a configurable material which contains another configurable material in its BOM the item catergory for the configurable item is N , the problem is that during batch detrminittion of the material in the production order the system issues this message ' Batch entry/batch split not allowed for component xxxxx
Message no. CO584'
however the batch determination for other material types is workinf fine
please advice
regards,
Ahmed Sobhi

Hi Ahmed Sobhi,
Please check these steps that you have done exactly like this;
For that you have to do five important steps or features you have to know OK.
1) Batch number assignment: We use this function to assign a batch with a number that uniquely identifies it OK.
2) Batch Specf: To describe each batch uniquely using like Characteristics and characteristic The values. are allocated in the material master.
3) Batch status management: To indicate weather a batch is usable or unusable: We can set (a) Manually in the batch master record or at goods receipt and (b) Automatically in the usage dissension in quality management.
4) Batch Determination: We can use this function for various criteria to search for batches that are in stock (a) movement type: When posting goods issues (b) When combining suitable components for order types.
5) Where used list: The batch where used list shows the path of the batch from its procurement to its delivery to the customer.
6) Active Ingredient Management: This function is to administrate and process materials with active ingredients that are to be handled in batches OK.
Condition types: Say for x material if we want to determine the batch at the movement type/ plant/order type.
Access Sequence: It will checks weather the batch determination is done with movement type/ plant/ material &
order type/ plant/ material.
Strategy type: We will assign here condition type and Access sequence and as well we have to maintain Class type: 023
sort sequence, batch split
Batch Search Procedure: Here we will define the search procedure and using the condition type here OK.
Batch Search Procedure Allocation and Check Activation: Here we will assign the search procedure to the movement types and for order types as well
HERE THE BELOW FOLLOWING DATA WILL GIVE YOU RIGHT UNDERSTANDING OK:
a) It will looks for the search procedures.
b) It searches through the strategy types in the search procedures for a valid search strategy.
c) Characteristics from the selection class of the search strategy looks for batches with suitable specifications.
d) Then it will looks for weather the batches are available.
e) It sorts the batches that are available according to the sort rule from the search strategy.
f) Then the system selects a proposed quantity with proposed quantity from the search strategy OK.
Go -
> Logistic General -
> SPRO -
> Batch Management you can find every thing there it self OK.
I hope it clears you, any questions revert me back OK.
Regards,
Madhu.G

Reg:Product Costing by order Configuration

HI all,
How to configure Product Costing by order.
plz send me the configuration steps.
regards
JK

We have a make-to-order (sales orders) scenario where standard cost estimate is updated in material master as standard price for finished products. We use CK40N to update the price.
We also have a make-to-order ( projects) where we do run standard cost estimate in CO version 1 but do not update standard price in material master. The standard price is zero in material master , before GR from production.
In a make-to-order scenario , you can choose to implement to update or not update standard price in material master.
Hope this helps you.
rgds,
Rajesh

Production Order BOM with Variant Configurable Material

Hi,
I have a requirement to process the document items in the Production Order BOM for a variant configurable martial. I am not sure which Function Module will do this purpose. I checked the FM: CS_BOM_EXPL_MAT_V2 and does not seem to be working.
Can you please help me with a suitable Function Module or program that will process the Production Order BOM? Appreciate Your Help.
Thanks,
Kanan
Edited by: Kannan SA on Jul 6, 2011 8:59 PM

What are you doing with the characteristics right now ?
If you want operations selected based on characteristic values, you need to have dependencies written just like you do (or in your case, will do) in your BOM components.
I understand the business-push to not do things 100% at the start and just "oh we'll add that part later" but I would really push back to get that part included initially.

PRODUCTION ORDER CONFIGURATION STEPS

Similar Messages

Maybe you are looking for