Production order confirmed quantity

hello!
can i change the settings, that production order atp-check confirms quantities from e.g. purchase requisitions, not only stock in warehouse?
best regards,
matthias

hello!
every supplies are ticked in OPJJ. it works for receipts before demand from production order, but no receipts in future are confirmed.
Date                          MRP element                           Req/rec     Confirm     ***. ATP
04.03.2009     Stock                                                  1      0
12.03.2009     OrdRes     Totals record     3-     1      0
14.03.2009     PurRqs     Totals record     1      0      1
02.06.2009     -
>     End lead time     0      0      0
02.06.2009     PurRqs     Totals record     3      0      0
i would expect that the order confirms the quantity from the purchase requisition.
best regards,
matthias

Similar Messages

Changr HU quantity generated via PRoduction order confirmation

Hi gurus,
I have created GRN of 112 quantity via production order confirmation.
My plant andstorage location is Handeling unit managed so with GRN handeling unit gets generated.
but packing had done for 1 quantity only.
now how to change this quantity? I tried HUCANC t code and gave the HU number but system is giving error that HU can not be cancelled. first cancelled material document
but GRN has made 112 quantity which is correct then how HU got packed with 1 only?
I stuck up pls help

when I am trying to change Hu in humo i am getting following error
Storage type 111 does not allow repacking - HUs cannot be changed
also getting following error if I am changing the quantity or emptying the Hu
Handling unit 10016000800120555 has status "cannot be changed" - Process cancelled
Edited by: vrunda on Jul 9, 2010 10:57 AM
If I tried to delete
Handling unit 10016000800120555 contains items that cannot be deleted
Edited by: vrunda on Jul 9, 2010 10:58 AM

Change Work Center during production order confirmation

Dear All,
I must to modeling this situation:
I created an production order. In routing I used an work center A.
After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
Thank you for your answer!
Regards,
Marian

once a Order is released, the Process order detaisl for that order is frozen.
however if you want to do it, change the order status to CRTD after reversing the Movements done.
Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
if the change is long term.
or
Just manually add the new work center and do the processing. if the change is temporary.

Measuring point update by production order confirmation

Hi friends,
I created a prt as equipment and assigned it to the routing. I created a production order and when i confirm the same i am getting following error as:
Document MeasUnit has a different dimension to the characteristic unit
Message no. IR071
Diagnosis
The measurement unit on creation of the measurement document must have the same dimension as the measurement unit of the characteristic of the measuring point.
In this case, the measurement unit % does not suit the character unit EA of the measuring point 103.
System Response
Processing will not be continued.
Procedure
Use the possible entries help.
Please suggest the solution.

Hello Sir(s)
i have gone through entire post for the subject related to measuring point auto update from production order confirmation. I have tried the same but i dont know what i am missing.
if i put some value like 1 or 2 and appropriate UOM then only my measuring document is being updated with the same value not with the actual confirmed quantity.. i have already maintained standard formulla in prt view.
my basic requirement is to get actual value of produced quanity as counter update. means if 20 pieces have been produced and confirmed in co11n, then counter must bhe updated with the value of confirmed quantity.
please advice what value should i put as usage in routing master to get actuall counter update.
Will Highly appreciate your quick reply.
Snapshots
Regards.
Mohammad.

Production order confirmation problems

My production facility has been having problems for years centered around the production order confirmation process. My colleagues and I are considering submitting an OSS note to SAP, but figured that we should present our problems in these forums before making that next step.
Here are some individual issues which I believe may be related. All of these issues occur off and on at random. They will typically occur when more users are working in the SAP system or when SAP is running slow.
- When an order is confirmed and a label is printed, sometimes the quantity on the label will be incorrect. Sometimes no label will print out at all. When the order is unconfirmed and then reconfirmed again, a label prints out with the correct quantity.
- When a confirmation is unconfirmed, the unconfirmation will not backflush the associated materials correctly. Sometimes this error will appear in CO1P for us to re-confirm, but not always.
- Sometimes confirmations will only backflush certain materials and not ALL the components within the production order. When the confirmation is unconfirmed and then reconfirmed again, the confirmation will backflush all materials correctly.
These problems occur at random intervals and never present the user with an error. Close to 100% of the time all the confirmation issues will be corrected by simply u201Cre-doingu201D the confirmation as we did the first time (no changes in the process). Only the second time around there will not be any issues. This leads me to believe there is some internal issue with SAP, perhaps involving which tables CO11N pulls from when a confirmation is made.
Any and all help is appreciated. We currently run the AFS version of SAP. This is my last stop before submitting an OSS note.

Hi,
I have not worked on AFS, so consider the below as a pointer which might help:
When you post confirmations & notice that the components are not being backflushed, check in COGI it could be that there are some incorrect goods movement. You will be required to clear these entries from COGI.
I suspect that you notice these because, the confirmations are being posted even before the stock for the same has been received & hence the issue with labels as well.
Do a check on the above, if it resolves the issue, then i would suggest re-design the process to ensure you do not have COGI or COFC entries.
Also do a search in OSS for AFS specific notes on confirmation.
Hope it helps.
Regards,
Vivek

Production Order Confirm/Label Printing problems

I am currently having issues printing out labels for production orders. Whenever I confirm an order, our printer will print out a different quantity or no label at all.
Here is a brief history of production order confirmations today....
Entered                Printed
80                           40 (2 labels of 20)
20                           No Print
20                           No Print
40                           No Print
ALL confirmations were accepted by SAP
SAP WILL often drag during a normal confirmation when correct labels are printed
SAP will NOT drag when a confirmation is entered and no labels are printed
Yesterday I had a confirmation for 10 print out a label for 19. All of the quantities in SAP are correct, it's only the printer that is creating labels for different quantities. If all the lot sizes in SAP are correct, what do you think the issue might be?

Hi,
Based on what i understand of your query, would suggest to work with your technical person to have a look at the print program. The delay you notice or the incorrect data being printed might have to do with the program.
Regards,
Vivek

Goods movement tab in production order confirmation

Hi Gurus, please suggest me with the solution for my requirement.
while performing production order confirmation, some user should be restricted to see goods movements and some can. how is can me done?
Thanks in advance.

Dear,
Please refer my reply from this link,
[CO15/CO11N Goods Movement Screen Hide or Non-editable |CO15/CO11N quantity column should be non editable in Goods Movement Screen]
Regards,
R.Brahmankar

GR qty showing less than production order confirmation qty

Hello Experts,
Greetings.
My issue is while doing production order confirmation(CO12),for some materials it shows less GR quantity than the confirmation qty.I m wondering how it can be possible?
What could be the problem?
Plz advice.
Thanks
Nitin

Confirmed qty of each operation and delivery qty at the header are two different fields. Confirmed qty will be the same with the yield to conf. during confirmation. Whereas, the GR qty is equal to the total sum of quantity received from the order.
Check whether during confirmation you create auto GR or not. If yes, then check the COGI t-code. There might be some error log of goods receipt in there. If no, then check GR qty in document goods movement compared to confirmed qty during confirmation.
Hope it helps.

Batch Split during GR for Production Order Confirmation

Hi All,
We need to do batch splitting during GR for Production Order Confirmation.We are using CO11N for confirming the Production Order and in the PP settings auto GR is activated once the Confirmation is done.
Currently it is generating only single batch number for the complete quantity, but our requirement is that we need that system should create separate batch for each piece.
For ex.: Production Order is for 100 pce, when we do Production Order confirmation, system is automatically doing the GR by 101 movement type and it is creating one single batch for full 100 pce. But we want the batch number should be generated for 1 pce i.e. we want to split the 100 pce into 100 batches with 1 pce each.
Please let me know what can be done for this requirement.
Regards,
Ankit

Dear,
In OPK0 you need to active the screen Mill: Goods Receipt (8485) for confirmation profile for the single-screen entry.
Best way is use BAdI /SAPMP/SPLIT_CO11N for the Enter Time Ticket for Production Order transaction (CO11N)
you must activate BAdI implementation /SAPMP/SPLIT_POPUP and/or /SAPMP/SPLIT_CO11N for this BAdI
I have use the same BADI it will ask you number of split according to that it will split the GR line item.
Please refer this link,
http://help.sap.com/saphelp_dimp50/helpdata/EN/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
Regards,
R.Brahmankar

Production order confirmation with BAPI

Dear PP friends,
I want to create a program to confirm production orders in mass at header level like CO15. To do it I am trying to use BAPI_PRODORDCONF_CREATE_HDR and it works fine for planned backflush.
However, I am not able to change data of goods movement (quantity, warehouse and batch). Is it possible?
What is the function of GOODSMOVEMENTS table?
I studied the following thread but I could not solve it.
Production Order Confirmation BAPI
Does anyone have suggestions?
Thanks in advance.
Marcos

Hi Caetano,
Thanks for your reply.
I tested BAPI_PRODORDCONF_GET_HDR_PROP and it proposes goods movements according with open quantity of the production order. In this case, would I have to adjust all movements with actual quantity?
Is possible to propose goods movements according with confirmed quantity?
Regards,
Marcos

PRODUCTION ORDER CONFIRMATION INCORRECT

Hi Gurus,
The Issue I have at hand is related to a PRODUCTION ORDER CONFIRMATION INCORRECT. Ok here is what happened. A production order was put in for quantity of 3. But the confirmation against this order was posted for 100,XXX,XXX. This was scrapped and only 3 was confirmed and received into the inventory (So inventory movement is fine, only for 3). But the initial confirmation of 100,XXX,XXX caused posting for Labor & OH based on the activities to sec. cost elements. So now what happened is there are posting against sec. cost elements in millions, which have been settled to cost centers. Obviously this is incorrect.
So now we have statistical postings to sec cost elements that are overstated and incorrect. The period for the prod order has closed. The prod order has status of released.
Now my questions are as follows:
1. How do we go about fixing this? Best practice?
2. Can we manually post to sec cost elements to correct overstating?
3. Can we do manual Journal entry to resolve discrepancy (But that would be a real posting).
Also would had it been the best solution to just cancel the prod order with the wrong confirmation and re-issue another in the period of occurrence. If you need more information to provide help please let me know.
I am new to product costing. Please help.
Thank in Advance!!!

Hi Ajay,
I have some follow up questions, please help. Thank You so much. I am sure I will be able to resolve soon, now. Thanks
2. The manual entries that were posted, can they be reversed, even though period is closed? You mentioned reverse in same
period. So I can post a reversal document in the period of occurrence?
No. For any FI posting, your period has to be open
Q. Ok then if the period is closed and I have to reverse the postings, do I post a negative posting in the current period?
3. Also should I run KB21N in the same period? (If I can, I should I believe?)
Yes, in the same period
Q. If the period is closed like I mentioned earlier, would I still be able to run KB21N in the same period or this should also be run in the current period?
4. In KB21N I changed the screen variant to u201CAllu201D but I still donu2019t see sender u201Cproduction orderu201D, I just see sender cost center, sender activity type, receiving cost center, receiving order and etc?
The field "order" is the field you should use.. It is same as Prod order / Int Order
Q. Yes ok but in KB21N there is no sending order, there is only receiving order. Please help
5. Also will the KB21N posting fix the Profit and loss posting of the loss?
Yes, it will.. But you will have to re-run period end steps until settlement
Q. re-run period end steps, can you elaborate a little more. Thanks
Thanks again for all your great feedback.
Arvind

Production Order Confirmation saved but no goods movement happening

Hi Folks,
I have implemented an enhancement while Production Order Confirmation ( txn CO11N). The enhancment works as follow:
I have a production order with quantiy 2. Now I am making confirmation for quantity 1. In the enhancement, i have used a BAPI called BAPI_PRODORD_CREATE_FROM_REF to create another production order with the remaining quantity 1.
As of now everything works fine and a new prod order is created with quantity 1.
Now, I release this newly created prod order and make GR for the same. The problem here is, now when I try to confirm this newly created prod order ( txn CO11N), the confimation is saved but the goods movement does not happen. I get a message saying " Confirmation saved (Goods movement 0, failed 1) ".
The original order is of type PP01 and everything works fine for it. The newly created order is of type ZRWK (rework) and for this only confimation is saved but no goods movement.
Request you to please suggest how can I remove this error and make goods movement as that of for the original order.
Thank you.
Regards,
Sud.

Hi
Check if you have something in the tcode COGI. Perhaps you don't have enough stock of raw materials
Regards
Eduardo

Serial Number. Production Order Confirmation. GR. UD. Sales Delivery

Hi Gurus,
Please help on this issue to get any user exits .....
As part of Serial number management, we have a certain issues on serial number confirmation, goods receipt from production order and quality inspection with UD.
Master data:
Finished product material master, Workscheduling view, Serial number profile maintained " ASRN"
Process flow:
1) Avalon Specific Serial numbers generation for finished goods through production order release status.
              (A11206000001)
                                    A - Avalon
                                    1   - PCB Unit 1
                                    12 - Year 2012
                                    06 - Week
                                    000001 - Running serial number for the week.
2) Production order confirmation through CO11n transaction.
3) Production order Goods receipt through MIGO transaction against order.
4) Quality Inspection with Usage Decision through QA32 transaction.
5) Goods Issue for Delivery.
SAP Product Error:
1) System does not track and control the operation wise confirmed serial numbers during order confirmation.
2) System does not track and control the finally confirmed serial numbers during order goods receipt.
3) System does not track and control the last goods receipt qty in Usage Decision.
4) For semi finished product, if we maintain serial number profile in workscheduling view, system is not showing goods issue material list in Co11n transaction for the finished goods.
5) Interfacing the serial number reading scanner with SAP, is not working without entering material number and serial number manually.
6) System does not tracking and controlling the last Usage Decision done serial number during Goods issue to Sale order Delivery.
Regards,
Santha

Hi Santha,
This is a bit vast, but I'll try to address at least some of the issues:
1- serial number in operation confirmation is not possible, for the reason that serailization is part of stock management, and as WIP in an order, this is not stock yet. Actually you cannot confirm the manufactured material either, and those 2 go together.
For tracking specificly WIP, there's something called WIP batches; you may look into it to see if you can use it.
2- during GR system will propose those SNs that you have defined for the order at release or creation.
3- ?
4- GI in CO11N is provided only for BACKFLUSHED material components. Serialized materials CANNOT be backflushed.
5- You can use a barcode reader to read the serial number (instead of keyboard entry) when cursor is on the right field in the respective screen.
6- ?

URGENT: Prob with Production Order Confirmation

Hi Gurus,
I have a problem with Production Order Confirmation.
When I am confirming a Prod Order and if the components present are more than '999', then error is being thrown and Material Document Number is not being created.
I want to split the records into 500 slots and pass them at a time for the creation of the Production Order so that it doesnt throw me an error while creating a Material Document No.
While saving the Production Order confirmation order, it should split the records into 500 slots each and then create Material Document No for each slot.
Can anyone please help me out in this regard, how to solve this.
Thanks & Regards,
Harish Kalla

Hi Harish,
This problem is addressed in OSS Note : 36353
The Symptom reads like this
==========================================================================
When you post documents using the AC interface (from SD, MM or other applications), items appear in the FI document which are identical in all or in almost all fields.
This can also cause error message F5 727 ("Maximum number of items in FI reached"). The system issues this error if more than 999 items occur in an FI document.
===========================================================================
This Note is an elaborate one..
Hence, go through this and ask your FI Consultant to help you in this regard.
All the best..
Regards,
Siva

Production order confirmation in co11.

In co11 , I want to post balance qty while doing the production order confirmation. actually total qty issue is 10 but confirmed qty is 5 , here balance qty 5 shud be posted automatically while save the confirmation.

solved . developed the custom pgm.

Production order confirmed quantity

Similar Messages

Maybe you are looking for