Production order creation without reservation

Dear Guru,
I will have to create production order without reference to reservation.
reservation should not display in production order.
We are not using MRP.
So please suggest me any way if possible.
With regards...
Abhi
Edited by: abhi on Nov 18, 2009 2:26 PM

Dear Abhi,
When you create production order, the component should be reserved then only you can process your order.  So the functionality of creating reservation is that only.
When you run MRP, planned order is created.  The dependent requirements will be created for components of that planned order.  When you convert planned order to production order, the dependent reqmts becomes reservation.
If you make any changes in quantity of production order, simultaneously the reservation quantities are changed.  If you delete or put TECO the reservation will be deleted.
This is the functionality of reservation.
Regards,
Vikas.

Similar Messages

  • Selection Of BOM & Routing at the time of production order creation

    Hi guys,
    Please clarify how i can go about for the following mentioned scenario
    I have one Master BOM(Finished Product Level) & alternative BOMs for that,similarly i have one Master Routing & alternate routings for the same finished product
    At the time of production order creation is it possible for me to choose one of the BOMs & One of the routings of that particular finished product without creating a production version?
    Awaiting for a quick response
    Vijai

    Hi vijai prasad shanmugam ,
                                              In the material master MRP-4 view under the BOM selection you can maintain on what fatcors you want the BOM to be selected  Viz. Selection by order quant.,Selection by explosion date.Selection by production version etc.
    As far as the master recipe is concerned ........ I guess that if there are more than one valid master recipe maintained then SAP will prompt to select the one manually.........
    But it the standard practice to maintain the production version ....... for the similar situation to the one that you have mentioned.
    Please Let me know if I can help you in any way regarding this........
    Please reward the points......... in you find the ans helpful.....
    Thanks
    Kaushik

  • Production Order creation through Tcode- CO10.

    Hi,
    Can I restrict new Production Order creation through Tcode- CO10 unless previous order is Techoed / closed.
    Issue : Users having authorisation for CO10, are creating multiple orders without taking them to logical closure. Since budget is getting allocated for the each & every order, in the year end reconcilation becomes difficult.
    Please suggest.
    Regards,
    Vivek S.

    Please post it in PP forum

  • Production Order creation through Tcode- CO10 unless previous order is Tech

    Hi,
    Can I restrict new Production Order creation through Tcode- CO10 unless previous order is Techoed / closed.
    Issue : Users having authorisation for CO10, are creating multiple orders without taking them to logical closure. Since budget is getting allocated for the each & every order, in the year end reconcilation becomes difficult.
    Without using an exit can we achieve it???
    Please suggest.
    Regards,
    Vivek S.

    Hi,
    You had to use the cusomter enhancement for the same
    Thanks
    SUMIT

  • APO: RRP3 automate Production order creation from planned order ?

    Hi everyone ,
    I have got a business requirement in APO where in Open sale orders uploaded in R/3, needs to be converted to Planned order and subsequently to Production order in APO-PPDS tcode RRP3 at all stages. They want to automate this process rather than doing it
    manually.
    Can anyone tell how is this possible . Any BAPI or function module available to do this . Please help.
    Regards,
    Syed

    Hi,
    1.You need to run the heuristics Planning of standard lots SAP_PP_002  in /SAPAPO/CDPSB0 by specifying the time profile
       and  strategy profile, planning version and propagation range, product and location.
    2. Convert PPDS Planned Orders created to process orders thru /SAPAPO/RRP7 by specifying the product location start date of the order for production order creation.
    Out put of step 1- For sales order requirement, PPDS Planned orders gets created.
    Out put of step 2- PPDS Planned orders are converted to production orders.
    Thanks,
    nandha

  • IDOC/BAPI for Production order creation from Legacy system

    Hi all
    We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
    thanks a bunch

    Hi John,
    For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
    If there is an inbound IDoc available, I would recommend to use an IDoc.
    IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
    BAPI is also good approach to use and fast in term of  processing.
    For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
    Hope this will help.
    Regards,
    Ferry Lianto

  • FM for creation of production order creation

    Hi All,
    Can anyone tell me the BAPI for the production order creation.
    BAPI for creation of production order through CO01 transaction code.
    Thanks in advance
    Ramesh.

    Hi,
    Please check this FM CO_ZF_PRODUCTIONORDER_CREATE.
    Regards,
    Ferry Lianto

  • IDoc Configuration for Production Order Creation and Change

    Hi All,
    Please Help me out for IDoc Configuration for Production Order Creation and Change
    I have found the IDoc for Production Order
    Messgae Type : LOIPRO and IDoc type : LOIPRO01
    Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
    I have done following Configurations:
    1. RFC Destination created for XI system
    2. PORT was created for XI
    3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
    I need to know how to do the followning.
    1. How do i configure the outbound Production order idocs when Production Order is created or changed.
    2. in NACE (Output control) which is the Application for Production Order.
    3. How can I set IDoc as output Type for Production Order Creation.
    Thanks in advance
    Dhanabal T

    Hi Michal,
    I know that it is the old thread but still want to get clarified from you out of curiosity.
    Unlike other IDOC, i actiavated change pointers for LOIPRO
    1.message and idoc type is linked
    2.function module , message type , idoc type is linked
    function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
    3.BD64, distribution model is created and distributed
    4. port and partner profile is in place.
    5. IDOC is not getting generated after creating the process order.
    do we need to activate the change documents for the message type in BD52,
    if yes can you please provide the object types for the same.
    or i am missing something else. please guide me in this regards.
    Thanks in advance for your time.
    S.Janagar

  • Notify of Production Order Creation service

    The SDN WIKI for Integration of Manufacturing Execution Systems states that...
    "Now, as of Enhancement Package 4, each time a production order is created in SAP ERP, that action automatically invokes the Notify of Production Order Creation service operation, which informs the MES system of all the details of the new production order. "
    I am not able to locate any further documentation and definition of the Notify of Production Order Creation service.   Please provide assistance on where to find documentation of this service.

    Look at these links , may get some help ....
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/espackages/create%252bproduction%252bplanning%252border
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/espackages/find%252bproduction%252border%252bby%252belements
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/espackages/change%252bproduction%252border
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/espackages/find%252bproduction%252bplanning%252border%252bfor%252bapproval%252bby%252belements%252b(SCM)
    Regards
    Abhishek

  • Manual production order creation in MTO

    Dear collegues,
    I am stuck in a scenario:
    I have a finished item A. strategy 20 is used.I created sales order for A in plant 1000. MRP run in plant 1000 happens. Through special procurement key 40, system generates planned order in plant 2000. Planned order is converted to production order. I can see in assignment tab of production order,  Production plant is 2000 and planning plant is also 2000. Till here it is ok. I will do GR against production order in plant 2000 and through SD route I will send it to Plant 1000.
    But when I create manually production order in CO08, always system sets in assignment tab of Production order , production plant as plant 2000 and planning plant as 1000. How to avoid this? Why manual production order is not like MRP generated planned u2013production order?
    Kindly help.
    Regards.

    Give below a try in sandbox (Not from experience, so not sure if it works):
    At the time of production order creation, maintain the production plant in Sales Order & ensure the demand flow to MRP is switched off at schedule line (If you're not sure, take help of your SD person).
    The order created in CO08 should now have production & planing plant as same. Once that is done, switch back the plant in Sales Order & release the demand to MRP. (I hope the cut over plan has addressed the sales & MRP flows, so no inputs from my end)
    If the above does not work, then revert with details.

  • Blocking of production order creation

    Hi All,
    I need a help on blocking of production order creation.
    I have few materials for which deletion has been activated in material master. But for these materials, while creating production order it is allowing to create by showing some warning message. But I want to totally block creation of production order.
    Regards,
    Vijay

    Dear,
    Youneed to define for block for productio.OMS4 --> create new one material status (08) for "Blocked for Prod Order" and set the prodution.
    If u want plant specific block then do not use this indicator in basic data 1 view ,use it in purchasing alse and MRP view.
    Please check with Message No M7-127 at OMCQ. Here u can set error message
    IMG>MATERIAL MANAGEMENT>INVEN>DEFINE ATTRIBUTES FOR SYSTEM MESSAGES. message no M7127
    Change the warning message to error. Then create the production order and check.
    Or Archieve material by SARA
    Regards,
    R.Brahmankar

  • Mandatory field in Production order creation field

    Dea All,
    I want to have a field mandatory at the time of production order creation. in CO01 Goods Receipt Tab there is a field of Goods Recipient in the second last row. Please guide me how can i make it mandatory field.

    Dear,
    Yes it is possible through the user exist, input check is carried out for enhancement PPCO0018.
    User exit PPCO00018 should use ful for order header screens GENERAL ASSIGNMENT, GOODS RECEIPT and CONTROL tab.
    Or go to SE51 enter program  SAPLCOKO Screen No 5190 click on change and the Lay out here you can define it as Input field Take help from technical person.
    Regards,
    R.Brahmankar

  • Lock the production order creating without material for order type zp01

    Hi all,
    Good morning.My client wants to lock the production order creating without material for order type zp01.He does not want to create production order without material.Its very urgent.Please guide me the settings if any.
    Thanks and Regards
    Sukumar

    Hi Sukumar,
    You can do by applying user exit.
    Use PPCO0007 - Exit when saving production order.
    Function module - EXIT_SAPLCOZV_001.
    Include Program - ZXCO1U06
    Write your Code:
    *&  Include           ZXCO1U06
    Regards,
    Sankaran

  • Batch no assigning during production order creation

    Sir,
    We are manitaining the batch management for inut raw materials. During production order creation it is mandatory to assign the batch no for raw materials then only production order releasing is possible.In our case due to batch assignement to production order while order creation,we are facing the lot of problems like batch no not assign for full req qty and also if unavailabilty of stock for particular batch no it will come to COGI.hereby i need experts help for,
    1.I want to determine the batch no during confirmation instead of order creation and also allow to release the production order even batch should be in blank.
    Kindly help
    Regards,
    PS

    Hi
    For Rawmaterials why cant'n you assign Batch nos buring GR of purchase order.
    Then you can do automatic batch determination during confirmation of order for mvrmt type ;261...
    This is  easy  to handle.
    Please check and come back
    Regards,
    srihari

  • Serial number in production order creation CO01 Transaction

    Dear All,
    we are maintaining serial numbers for each product by using serial number profile .
    For some products we creating serial numbers automatically during production order creation.
    For some products we are selecting predefined serial numbers from IQ03,during production order creation.
    But some products , we are maintaining serial numbers in excel sheet ,when ever production order created , we used to copy the required
    serial numbers from excel and pasting in CO01 serial no provision fields.Here it is allowing to paste 20 serial no's at a time, but we want to
    give more than 20 serial no's at a time
    please find the attached screen shots and provide solution
    Production order creation
    Execute Transaction : CO01
    After entering qty , we usually go to Header and select serial numbers
    then it will populate provision to enter serial number for 30 sets
    Here we are entering  required serial number manually fro few products
    The serial number to be used for this production order against this product like below
    M1001
    M1002
    M1003
    M1004
    M1005
    M1006
    M1007
    M1008
    M1009
    M1010
    M1011
    M1012
    M1013
    M1014
    M1015
    M1016
    M1017
    M1018
    M1019
    M1020
    M1021
    M1022
    M1023
    M1024
    M1025
    M1026
    M1027
    M1028
    M1029
    M1030
    Then we will copy all 30 serial number and try to past in below screen
    But it allowing only 20 serial number at a time not for 30
    After pasting 20 serial no's , user manually selecting remaining 10serial numbers and pating in the same screen by scrolling the page
    For example if production order quantity is 500 , then user put serial numbers 25 times it consuming more time
    Requirement:
    System should allow to paste all serial numbers at a time
    Regards
    Satya

    Hello Satya,
    I checked this requirement and did not find anything relevant.Even for MIGO there is a note  1883420 - In the transaction MIGO only 6 serial numbers can be entered at the same time .So as per my view you can either
    1. Create serial no's before hand which you want to paste from Excel or
    2. Some custom/alternate  development for CO01,discuss with your Abaper. or
    3. Raise OSS messge to SAP.
    Regards,

Maybe you are looking for