Production Order is Still saved even after CK 465 message changed to Error

Hi,
While creating production order in CO01,we are getting one Warning message CK465.I have made that warning message CK 465 as Error Message in configuration.
After that i have created on Production Order in CO01.When i see the Log in CO01,it is showing as Error Message.But the production order is getting saved.
As per the client requirement,when we get that CK 465 -Costing Error,The production order should not be saved,but in my case it is gettings saved,Now what should i do?
The Error Message is:
No price could be determined for material/batch 0118E9152/ plant AX01 @35\QLong text exists@Costing
Kindly advice me how to prevent this production order saved when it is error mode.
Thanks
Supriya

Just a question: Do your Clients have a process to correct the error in production order costing without seeing the Order BOM and Routing? I can think of many examples here that you wouldn't be able to fix without seeing the order. Our acounting dept uses COOIS to review orders with status CSER.

Similar Messages

My ipod touch still freezing even after restoring it

plz i need help....my ipod touch still freezing even after restoring it...plz send me email to [email protected]

If you did not restore to factory defaults/new iPod do that. If yuo are still having problem then an appointment at the Genius Bar of an Apple store is in order. You likely have a hardware problem.
You are not addressing Apple here. We are just users like yourself.

Why does my Iphone 4 keep telling my that my apple password is incorrect even after I have just changed and rest my password?

Why does my Iphone 4 keep telling my that my apple password is incorrect even after I have just changed and rest my password?

Sign out of your Apple ID then back in again with changes
also delete ICloud then sign back in again with new password.
bsydd uk

Restricting Production Order to be saved with Material that has No BOM

Hello Gurus,
I am not sure if I have missed something in the setup for the shopfloor control.
The situation is this, I have a finish goods material that has no BOM. I tried converting the Planned Order to Production Order but when I was trying to save the order it prompted "No Material Component", subsequently been SAVED!
Kindly provide assistance to resolve this concern.
Many Thanks,
Nap

Goto OPJK and for your order type Availability 02 under release material choose 3.No release if parts are missing
sytem will allow to save order but it wont allow to release and ultimatly to confirm.

Production Order reservation(ETO) not deleting after PGI (VL01N)

Hi All,
Greetings!!!
A query, regarding ETO (Project system)
ETO scenario, For production, reservation will be create through WBS element. After production , If I do delivery and PGI, production order reservation is not deleting.
Same material If I do delivery(LP) through CNS0, then order reservation is going to delete after PGI. But Sales order price is not copying to Billing If I follow this process.
Is there any copy controls to flow the sales price to billing when delivery happens through CNS0. If not
Which requirement class and movement type I need to determine in Sales order.
Please do needful.
Very High,
Thanks,
Prasad.

This is standard SAP
SAP process is to deliver project stock using project delivery , where in PGI happens against the reservation created & deletes RESERVATION.
wherein if you do PGI for order ( sale order or prod order ) , it happens against project stock ( spe stk Q - 281 movement ) i.e., against WBS element
I faced the same for sale order delivery of project stock .
we are selecting FINAL Issue indicator through user exit which triggers when PGI is clicked
This will delete RESERVATION from stock overview
hope this helps ...Let me know if you found any alternative

CK40N - Still open even after applying the note

Hello Everyone!
Greetings!
Experiencing issues in the costing run. SAP ECC 5.0
After the marking job completion observed that there are some u2018Still Openu2019 items. After some research found the SAP notes u2013 0000542790, 0001321242 & 0001402978.
SAP note 0000542790 is not applicable to us as the client is on SAP ECC 5.0. For the short term fix, as per the note 542790 have executed the command u2018=cksuu2019. It worked.
To apply the notes 0001321242, 0001402978 was testing in the test systems and I still see the u2018STILL OPENu2019 items even after implementing the SAP notes 0001321242 and 0001402978. Both the notes have been sucessfully implemented and also verified the corrections.
Any suggestions/advice, please. Thanks in advance !
Satish

Hi Satish,
There can be valid reasons for the 'still open' Materials.
The following are reasons for 'still open'
1. the materials were included in another costing run so there was an
overlap in released cost estimates
2. there was already a released cost estimate for those materials so
the system did not allow for another one - this could have been costed
manually and released manually (ck11) rather than in ck40n
3. there was a stop in the job that ran to release them (you mentioned
periods were closed). After the restart, some of the statistics could
have been incorrectly updated.
Furthermore, please see the note:
542790 Inconsistency correction: Costing run statistics
If need need to find the 'still open' Materials.
If you run tCode 'SE16' and view the table table KALM which contains
the entries for all materials costed within the costing run.
Field 'KALM-FEH_STATUS is the cost estimate's status after step costing.
1) Find cost estimates created originally within cstg run
So, you have to select all entries of KALM for the specific costing
run which are having KALM-FEH_STATUS = 'KA'.
This is the number of cost estimates which should have been marked in
the later marking step.
2) Find cost estimates released successfully
The set of released cost estimates is given by selection of table
KEKO: specify KALAID and KALADAT and FEH_STA = 'FR'.
3) Find missing cost estimates
Compare the results of 1) and 2):
Which material/plant have an KALM entry, but not a released cost
cost estimate ?
> this will be the set of cost estimates you are looking for...
Regards,Declan

Preview is STILL frozen even after force quitting, rebooting and reopening. Help?!? I need to see my files!

Not sure what I did, but Preview continues to stay frozen even after force quitting, rebooting and reopening. It seems like it is trying to open all 720 pdf documents I have on my internal memory. That's my best guess... I really don't know what happened. I've tried clicking the 'close windows when closing application' option under general settings and every other thing I've seen listed on help sites... nothing is working. PLEASE HELP?!?

Back up all data. Quit Preview if it's running.
Hold down the option key and select Go ▹ Library from the Finder menu bar. From the Library folder, delete the following items, if they exist:
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Log out and log back in. Launch the application and test.

Production client in modifiable stage even after client is closed.

Dear All,
I observed in my system that production client settings of spro is modifiable even after the client is closed.Can you suggest where the problem would be.Where as with same settings (of even customising client closed I m not able to modify in DEV).
Please suggest.
Regards,
Amit

Hi,
Cross Client and Customizing Settings should not be allowed and No Changes allowed.
At same time check in Se06, system status should be non-modifiable.
Thanks
Sunny

Still sleeping even after setting Energy Saver to Never

I'm trying to use my 2.53 GHz (Late 2009) MM as a server but even after setting the 'Computer sleep' preference to 'Never' in the Energy Saver System Preferences panel, the MM still goes to sleep. This isn't a big issue for me since I can and have used Wake On Lan apps/scripts, but it's a major pain in the you-know-what for other people who need to access this server over the internet.
Could there be some persistent overriding preference somewhere that is allowing this MM to go to sleep when in fact it should not be because of my setting? I've searched but can find anything.
TIA for any help with this.

Interesting... I had an EyeTV that I did install on an older G5 PowerMac that I stopped using before I migrated to this MM back in March. I'll check to see if the EyeTV app was also migrated over and uninstall it if necessary.
I would have thought that the EyeTV software would default to a "Never Sleep" state considering it's purpose. I'll check this possibility out when I get home after the long weekend.

Unresponsive system but mouse still moves; even after restart

I was transferring a few files over my LAN wirelessly via file sharing to another macbook (B) when that macbook was closed and caused a disconnect. My macbook (A) has experienced issues since this disconnect. Even after restarts and resetting the pram, my system is unresponsive. The mouse will move but I cannot open applications, folders, files, or even the menu. It is as if my mouse is moving over top a picture of the desktop. I did manage to click and highlight my HD icon once but as soon as I did, the color wheel showed up and never stopped. My hard drive has over 10GB of space free. I was able to do a target disk boot and test the drive and its ok according to disk utility. Any ideas about what I could do would be greatly appreciated...preferably without wiping the hard drive.

The first issue occurred while I was transferring large files from one computer to another via afp file sharing over my wireless network. In the middle of this transfer, someone closed the receiving macbook. The macbook sending the files didn't respond well after this. It would intermittently freeze without a linked resource draining process. I believe the first occurrence was when I tried to right click a file that had been interrupted during transfer. I forced a restart, used the killall Finder command in terminal thinking that it might still be trying to transfer the file to a ghost in some way...even though that didn't make sense. I was able to verify and repair the external drive the file was on. After doing this and resetting the PRAM, it was back to normal for a little while. After a bit of normal activity (nothing strenuous), it began to freeze again. I tried the same steps and also booted in target disk mode so I could use the other macbook to run diagnostics. The drive got repaired. I attempted to restart the affected macbook but I couldn't do anymore than one thing and the never-ending colorwheel would appear. That one thing could be a single click on a file or an attempt of opening an application. After that I turned to this discussion forum after already impatiently attempting to safe mode boot and repair disk permissions. I tried this again with patience after your suggestion. It worked for a few hours and I was able to surf the web once more and go about the usual. I pulled up dashboard and pressed command+ to bring up the list of widgets and it froze on me again. I attempted previous steps again after restarting but there has been no difference in response. Throughout the entirety of this experience, there have been no error messages. Also, there's no difference in behavior if I disconnect everything but the power cable.
Sorry for the lengthy post but hopefully it will be helpful.
Message was edited by: AG_Jazz

Serial port is still open even after closing it explicitly

Hello,
I need to close a VI that is using a COM port and use the same port through some other program. But for some reason even after I stop the VI where I explicitly close the com port, I can not still use the hypterterminal to connect to the port. It says port is being used by some other program. What can be the reason? Any thought ?
Thanks,
Ananda

Is the VISA close the last action you perform on the VISA reference?
If not, then your port will probably be opened again, so make sure it's the last one.
Also, I seem to remember reading something about some bug where VISA close wouldn't properly close the port. I would suggest you try searching for it and also make sure you have an updated version of VISA.
Try to take over the world!

Adobe Creative 6 is still pixelated even after I updated it on my Macbook with Retina display. HELP!

I just purchased the Macbook Retina display and installed my Adobe Creative 6. I mainly use Photoshop, Illustrator, InDesign and Acrobat Pro. When I use these programs, it still appears pixelated even after I updated the software. I've attached screenshots.

Photoshop CS6 and Illustrator CS6 have had updates that add support for Retina Display (generically called HiDPI support). InDesign needs to be updated to a Cocoa interface on the Mac and 64 bit support on Mac and Windows which can't happen until the next version of InDesign. Acrobat 11 was released too early for HiDPI support to happen.
Your screen capture of of InDesign.

Audio/video sync STILL off, even after detaching/extracting audio

So I know it's a well-known problem that the audio and video clips get out of sync upon exporting a movie out of the iMovie application. I also have seen that the solution for this problem is to detach or extract all and any audio clips. I've done this, and I'm still having the problem after exporting my movie (it plays fine in the application).
I detached/extracted my audio clips when I started making my movie, and have been altering them and working with them separately from the video for some time before exporting the movie. Is it possible this has made a difference? I have re-detached the audio multiple times hoping it will solve the sync problem, but with no success
Has anyone else had this problem? I would be so grateful for some help--it's making me crazy!
Thanks in advance.
Kyoko

I'm having the same problem. Imported clips from FlipcamHD. Everything plays fine in iMovie. I have titles, video clips that I've added music, and regular video clips with its own audio. It's a nine-minute video. I detached the audio from the clips that have audio and still the sync after export is not working.

Why is my Macbook still slow even after upgrading

Hi everyone, I'm not sure if this has been answered before but here goes.
So I have a Macbook 2.4GHz (13.3-inch Intel Core 2 Duo "Penryn") - Early 2008. Have been using it for the past 6 years without any issues. However during the past 1 year I've noticed that it has started to run slower and slower. Even simple task such as opening Safari might take longer than usual. I do not have much application installed as I only used that computer for surfing the net and making Words & spreadsheet documents. I have about 200GB of free hard disk space out of the 250GB standard HDD along with 2 GB of ram. After doing some research around the forum, I decided it might be a good idea to upgrade the HDD to a faster 7200rpm 750GB HDD drive as well as replacing the ram with new 2x2GB modules. I also did a fresh install of OS X Mountain Lion 10.6.8 (I did not install any other applications). But to no avail, it seems that the computer is still laggy and isn't as snappy as couple of years back. And by laggy I mean that opening pre-installed applications on the Mac such as iPhoto and Safari might still take 4-6 "icon bounces" to open.
So my question is,
1) What might still be causing the lag?
2) Are there any other components on a Macbook that might cause it to slow down?
3) Does components like the CPU degrade over time?
Any help would be highly appreciated.

Your computer isn't getting slower, it's other things demanding faster. If you are installing all the possible updates to software those will be designed for newer computers. Once you start browsing you're browsing a web designed by people who because they spend all their time designing pages they themselves have powerful machines with fast connections because it is their job. It's like if all city streets were designed by racecar drivers. A 2008 computer is already considered vintage by Apple and close to no longer being supported in any manner. Vintage and obsolete products - http://support.apple.com/kb/HT1752 I have an even older computer than you and it is annoying but that's the way things are.
Frankly 4-6 icon bounces doesn't sound long to me. Don't forget that for applications such as iTunes how long it takes to open will also depend upon the size of the library.
I don't think CPUs wear down. Conceivably some slow-down could be the result of excessive bad sectors on a hard drive but you say you replaced that (and I would expect it to have shown more serious symptoms were that happening).
You can use Activity monitor to check your RAM usage. Newer applications and newer OS versions will require much more RAM than posted "minimum" If a computer doesn't have enough RAM it starts using the hard drive which is slower than chips.

Sales Order status still "Being processed" after invoice (3rd party sales)

Dear SD gurus,
Here's what is done so far:
1. Create a sales order with one line (TAS item cat).
2. Trigger PR to be created. Approved the PR.
3. Create Purchase Order. Approve the PO.
4. Perform MIRO.
5. Create sales invoice based on sales order (billing based on supplier invoice).
6. Invoice released to accounting
Now, when I checked the sales order status, it's still showing "Being processed". However, invoice have already been created and released. I'm just wondering what else have I done wrongly. I believe the status should show "Completed" as well otherwise this order will keep showing up as outstanding in my sales order listing report.
Anyone got any ideas?

SAM
I had a looked at both the SAP Notes provided. Doesn't really apply in my situation. The Sales order was for 10 qty. My PR for 10 qty and I have also done a MIRO for 10 qty. even my sales invoice was for 10 qty.
I do not want to configure it to follow the PO quantity because I need a control where only vendor has delivered the products to the customer only then I should invoice the customer accordingly. If I allow the invoice to be created based on the PO quantity then the control factor will be lost.
I have yet to try the program that you recommended... will try that shortly.
And yes ... since I'm using the standard sap TAS item cat ... the "relevance for delivery" is already turned off and the billing is "F"

Production Order is Still saved even after CK 465 message changed to Error

Similar Messages

Maybe you are looking for