Production order manual confirmation

Hi,
We have an issue in Manual confirmation to the production order using CO11N..
Our Process,
Production Order confirmation creating via other system ( shop floor system) IDOC.We did one production order confirmation ( partially) for one operation.The total component Qty is 360 for the operation when i confirmed partially via IDOC it consumed 60 Qty.. When i do the manual confirmation for the same order to system ( CO11N) system proposed the component same qty 360 instead of 300..
We are using ECC 6.00 and IS Specfic AFS 6.0
Pl help to advice
Regards.
Kumar
Edited by: Vijayakumar Ramakrishnan on May 19, 2009 9:02 AM

Hi,
u can use CO1F progress confirmations, i hope that serve ur purpose,
thanks
mohan m

Similar Messages

Goods Issue Production Order for Confirmed Qty Component

Dear PP Gurus,
Here is my case :
Stock Qty for Sparepart A : 100 un
First production will require 80 un A, and availability check confirmed. Second Production Order will require 70 un A, where 20 un confirmed and 50 un is not confirmed on availability check. When i try to goods issue the second production order, it is allowed to consumed all 70 un because unrestricted stock is 100. How can i forbid goods issue in second production order only for 20 un A which is confirmed before.
Thanks,
Arman Lie

Dear
First of all what ever qty u release during production it well get copied in confirmation so as u said first production order is 80 so the balance qty is 20 out of 100 units so for 20 production order is confirmed so u need another production order for 70 in that case u have deflicit stock of 50 so for that reason ur production order not get confirmed for 50 in order to confirm this order u need t make a stock of 50.
1. check in the OPK4 enable the actual qty
2.check t-code OPJK Checking Rule and check when material availability when saving the order
and please check in the material master what availability check u have maintained in mrp
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/cf/70124adf2d11d1b55e0000e82de178/frameset.htm]
With Regards
Pushpalas

Production Order Operation Confirmations & CATS_DA

Hi All,
We are trying to reconcile a discrepancy between CATS_DA data and confirmations entered against production order operations.
I can see the Operation text in the CATS_DA report, and also the WBS element.
I can see the time entries on the confirmations on the production order.
But I can't find any link between the two, and if we sum or aggregate our data, the total hours for Production Order Confirmations are always more than the total hours in CATS.
This is driving us crazy. Can anyone help with some ideas?
Thanks,
Timothy

Hi Selva,
1. What is the object type for "Planned Orders" to define number range?
The object for planned order is PLAF. You can directly maintain the number range in OMI2 (for planned orders created during MRP) and OMI3 (for manually created planned orders).
2. How to define number range for reservations, operation numbers, order confirmations?
Go to SPRO on the following path: Production Planning for Process Industries - Process Order - Master Data - Order - Number Ranges
Or use the following transactions:
CO83 - reservations
CO81 - operations
CO80 - confirmations
Bonus: to define default values for operation, use transaction OPJG.
Regards,
Julian

Production Order Partial Confirmation Report

My requirement is to write a report to get all the partial confirmation time, date and Qty of a Production Order. Which table stores the relevant information? Kindly help me.
Thanks

Hi,
Check with AFRD,AFRU, AFRV RESB, AFKO,& AFPO tables.
Regards,
Maha

Changes in production order after confirmation

Hi all,
I have confirmed the production order & all the subsequent process are completed but still the system allows changes to the order which has status DELV. Please can anybody tell me how to control once when the production order status is in GMPS & DELV the system should not allow to make any changes.
Please reply, thanks in advance

Shaiz,
You can control this in 2 ways
Either by User Exit or User Status
User Status can be maintained in BS22 tcode against the status DLV
Revert back if you have further queries
Reward points if useful
Regards,
SVP

Restiction of Production Order Operation Confirmation

Dear Friends,
I need to restrict Production Order Confirmation among Production & Quality Control users i.e. production order contains both Production as well as Quality Inspection operations. I want to put restriction such that Production people should be able to confirm only Production relavant operations , same as QA people should only be able to confirm Quality Inspection operations.
Specifically I need more clarity on defining clear authorisation objects which can fulfill above requirement.
Kindly share your valuable inputs for the same.
Thanks in advance.
Regards,

Bad news Teja,
I go dig deep down to authorization object someone posted C_AFRU_APL Confirmation: Authorization for actual work center. It seems like in standard SAP will check this object only if the order category is 20 (PS network orders), or 30 (PM work order) but not production orders.
So if you want to check during CO11N transaction. Maybe user exit CONF003 (PP Order Confirmation: Customer-Specific Checks after Operation selection) with the sample code can be explored.
I apologized for my mistake.
u201C Check only production order
CHECK CAUFVD_IMP-AUTYP EQ u201810u2019.
AUTHORITY-CHECK OBJECT 'C_AFRU_APL'
           ID 'WERKS' FIELD AFVGD_IMP-werks
           ID 'ARBPL' FIELD AFVGD_IMP-arbpl
           ID 'TRTYP' FIELD u2018Hu2019.
IF NOT sy-subrc IS INITIAL.
      MESSAGE ID u2018Q0u2019 TYPE u2018Eu2019 NUMBER u2018156u2019
               WITH AFVGD_IMP-arbpl AFVGD_IMP-werks.
ENDIF.
This is smod u201CCONFPP03u201D. Standard message id Q0, 156 is the standard error message that you can use or you can create new customized message id.
Regards,

Actual production order final confirmation time

Dear all,
Could you please let me know who i can get the actual time a production order was finally confirmed? I know we have the production order statuses history chnage but were is it stored?
BR and many thanks

Hi Mikel,
Pass order number AUFNR to AUFK and fetch OBJNR.
Pass the AUFK-OBJNR to table JCDS to fetch the status STAT, changed date UDATE and
changed time UTIME where INACT = blank.
Pass the JCDS-STAT to table TJ02 and fetch TXT30 status text.
Filter the data with respective to TXT30 = CNF and accordingly get UTIME from JCDS.
Pre-requisite config:
Date related data in table JCDS will be updated only upon selecting the Status change
documents in OPL8/COR4 under implementation tab.
Revert if you have any issues.
Thanks & Regards,
Ramagiri

Production order operation confirmation before 261 movement

Dear All,
In a production order, components are assigned to operations.
I want to knw if there is any method to prevent the production order confirmation (CO11N) before issuing the material to production order. (261 movement).
Thanks in anticipation..
Regards,
Chetan.

Dear Vivek,
Appreciate your suggestion. I tried searching the topic in the forum by using all relevant words, bt ws unable to find it in the vast sea (May b i went wrong somewhr) . Could you pls. suggest the correct way to search it what could have been the possible search words for this particular querry? - It will help to resolve the querries in future as well. (In case of repeated ones)..
Thanking u in anticipation.

Connection between serial numbers in production order end confirmation

Hi all,
could you tell me if is possible in co11n to chose serial numbers already generated during the creation of production order?
I set an automatic generation of serial numbers in saving of co01.. can I decide in co11n which serial number of a precise prod.order to confirm?
Thanks,
Valentina

Thanks for your answer,
I'm using this way to do you suggested me.. but the problem is this:
For ex:
Prod. order A
Quantity of prod. order = 100
Quantity already confirmed 50
I have to put in warehouse only 5 finished prducts, but when I use migo 101 for a GR, the system proposes to me 100 serial numbers from which I can select 5 sn; next time whene I have to select 5 others serial numbers, the system proposes to me all the 100 serial numbers again..
I'd like to find a way to eliminate from the serial numb. list in migo 101 the sn that I've already selected before.
For this I can force the storage to "blank" in the list selection, but if another production order B, for the same material exists, how can I know which of those serial numbers belongs to the order A and which to the order B?
Regards,
Valentina

Table name& field name for production order & operation confirmation

Hi All,
          I would like to know the table name and field name for the production order "confirmation" (CNF) and the operation confirmation (CNF).
Thanks and Regards,
PSS

Hi there,
CORU(R/3 Application development: PP Confirmations )
AFFW      Goods movements with errors from confirmatio
AFRC      Table of planned changes to conf.: Automatic
AFRD      Default values for collective confirmation
AFRH      Header information for confirmation pool
AFRP1      Table of planned changes to conf.: Automatic
AFRP2      Table of planned changes for confirmation: B
AFRP3      Table of planned changes for confirmation: C
AFRP4      Table of planned changes to confirmatn: Data
AFRU      Order completion confirmations
AFWI      Subsequently posted goods movements for conf
TAFWD      CORU: Messages that are not interpreted as e
TCORD      Table for field-dependent check routines
TCORU      Parameters for order confirmations
TCORV      Table with Routines for structureing variabl
TCORW      Confirmation: Window Control
TPARU      Control parallelized confirmation processes
TPRRU      Control table for process chain for confirma
TPRRUT     Text table for process control of confirmati
TRUGS      User status caused by deviation
CO(R/3 Application development: PP Production orders )
AFBP       CIM order: Batch print requests
AFFL       Work order sequence
AFKO       Order header data PP orders
AFPO       Order item
AFVC       Operation within an order
AFVU       DB structure of the user fields of the opera
AFVV       DB structure of the quantities/dates/values
FAPW       Index of production-/issuing plant for produ
FTIND       Missing parts index
ORDCOM      Communication control Operation download
T024F       Production scheduler
T399X       Parameters dependent on order type
T441C       Profile - availability check
T441CT      Texts for Profile "Display Availability Chec
T490       Transactions PP - orders - order category
T496B       CIM order: Assigning document types to refer
T496D       CIM: Destination/lists/spool parameters per
T496F       CIM order: Form description of the list
T496K       CIM order: Entity table of possible table id
T496N       CIM order: List descriptions
T496P       Print PP documents: Determination of output
T496R       Print PP shop papers: Report control
T496T       Print PP shop papers: Transaction control
T496V       PP Print: Default Value for Printing Online
T496Z       CIM order: Table-controlled table access
TC32       Assigning subscreen to processing location
TC34        Allocating operation to object type for the
TC62        Sequence of detail screens when processing h
TCO01      Sequence/operations control in logicstics or
TCO03      CIM order: Texts for TCO01, Description of o
TCO04      Table for controlling the screen sequence gr
TCO05      CUA status depending on panel, trans. type,
TCO06      Exclusive functions for PP orders
TCO09      CIM order: Text IDs of objects in orders
TCO10      Valuation variant for order costing
TCO11      Control table for production orders - availa
TCO12      Control table production orders - stock dete
TCO36      PP orders: Control table for calling up pop-
TCO41      CIM order: Default values for generating ope
TCO43      PP-SFC order profile
TCO43T      Description of production scheduler profile
TCO60      Sequence keys for input facility and verific
TCO61      Sequence key for PP orders
TCO62      Defining screen sequences for input facility
TCO63      Sequence of detail screens when maintaining
TCODB      Database fields development class CO per ord
TCOF        Profile for missing parts info system
TCOFF      Profile for Missing Parts Info System: Displ
TCOFFT      Texts for Missing Parts Info System: Display
TCOFG      Profile for missing parts info system: crite
TCOFGT      Texts for Missing Parts Info System: Criteri
TCOFK      Texts for functions in milestones/trigger po
TCOFS      Profile for Missing Parts Info System: Sort
TCOFST      Texts for Missing Parts Info System: Sort Cr
TCOFT      Texts for Missing Parts Info System
TCOKO      Constants for PP orders
TCOKT      Account assignment categories for order
TCOP        Field selection profile
TCOPS      Field selection profile
TCOPT      Description of Profile for Field Selection
TDUMMY      Dummy structure of a table for READ with VER
TRUG        Reason for variances in completion confirmat
TRUGT      Text describing the reason for a variance in
TXPR1      XPRA control - missing parts info system
Regards
Hemant G

Batch Number Not copied over from Production order to Confirmation

Dear Experts,
In the production order, I specify the batch # for the components. But when I do the confirmation, the batch number for the components is not getting copied over.
Can anyone suggest what has to be done.
Regards
Tom

Dario, I have not saved my confirmation. But when I execute CO11N and go to "Goods Movement" tab, I expect the Batch to be copied from the production order for the components. But the batch field is Blank.
How do we make the batch field to be copied over from the production order.
Thanks in advance.
Regards
Tom

How to confirm the CO Production Order?

Hi,all
The PP Production Order can confirm by TCode CO15.
Then how to confirm the CO Production Order(Created by KKF1)?

Hi,
As you are aware that Co Production Order is being used when there is no quantity structure. Hence, there shall be no routings with details of activities and the quantity of activities, etc and we cannot use confirmation as we are doing in regular Production Corder. Consequently, we are left with one alternative of passing on the activity cost(qty x price) to the CO Production through Direct Activity Allocaiton(KB21N).
Trust this helps much!
Cheers!

How to avoid actual cost error log while confirm production order activity

Hi
I dont want to post actual activity cost via production order activity confirmation. But i want standard value keys for my production duration purpose. So,i defined activites(strd value key) in work center without assigning cost center to that work center. While i confirm in CO11N, system throws erro log as Actual cost calculation contain errors and allows me to confirm the activities. I am doing MB31 and all CO settlement activities also. But when i try to close the order it says error log exists,so closing of order is not possible. How to overcome this problem as i dont want to capture any cost of activites via production order,but i want confirmation only for production analysis.

Hi
Issue is resolved thru PP forum. Thanks for ur reply.
Solution lies in Control key of routing and BOM costing relevancy.

How to avoid Cost error log while confirming production order

Hi
I dont want to post actual activity cost via production order activity confirmation. But i want standard value keys for my production duration purpose. So,i defined activites(strd value key) in work center without assigning cost center to that work center. While i confirm system throws erro log as Actual cost calculation contain errors and allows me to confirm the activities. I am doing MB31 and all CO settlement activities also. But when i try to close the order it says error log exists,so closing of order is not possible. How to overcome this problem as i dont want to capture any cost of activites via production order,but i want confirmation only for production analysis.

Sudhar,
You can make the operation not relevant for Costing by using a Customized Control key which is not relevant for Costing or else in the operation details you need to leave the "Costing relevancy" field blank.
Regards,
Prasobh

Production order confirmation date & time not matching with MB51.

Hi All,
We are facing a problem when we confirm production order in a local time zone but when we go and check the material document MB51 , we find the posting date and time is showing System date and time and not the local date and time - in the month end we are facing the problems in reports preperation.
Please find the example as below-
Step-1
I do confirmation of Production order 101939015 for the Plant 2041
on 03/12/2007 at 11:39:33 ( USER TIME ZONE),
Step-2
Now go to the MB51 (Material document list)and check the posting time
- here the posting date and time is 03/11/2007 & 23:39:37. ( SYSTEM TIME ZONE.)
Material Document Number : 4909412794
From the above example we can see that the production order was confirmed in USER TIME ZONE ,but the document was posted in SYSTEM TIME ZONE, which is not acceptable to the USER, as in the month-end he is not getting the correct Reports. User wants a harmonized date & time.
Can anybody give some solution its very urgent.
Nitin.

Hi Nitin,
Can you check the confirmation time in the system by displaying confirmation and then there look for "Admin" data.
Also let us know whether Confirmation/Goods Movment is online update or run in background as job?
Please let us know your findings,
Regards,
Prasobh

Production order manual confirmation

Similar Messages

Maybe you are looking for