Production Order Mass Change

Hello All,
Do you know a transaction which allow mass change of productions orders?
I found COHV, but I'm not sure how to use it, and if is useful for what I need.
What I need is to change let's say for 100 orders field Scheduling margin (Tcode Co02).
Rewards points guaranteed.
Thank you
Bogdan

I don't want to change the material master...
I would like to this on a daily basis on opened production orders.
I would like to fake the order reservation for the default storage location 10 and at a certain date; I want to change in the production orders the storage location 30 (1 day prior to backflush)...
I know it sounds weird; but let me explain the entire process...
we have a stoarage location caged (Locked) ex: 10 where we really know the inventory levels; we would like to order according to the inventory level on this storage location.
--> At a point in time we will issue to another storage location (Production area)ex: 30 the material physically. In SAP we would issue to a cost center the material.
--> Storage location 30 allows negative stock (in fact there will nevever be any stock)
--> at the end of the month we will know the standard consumptions (total of the negative quantitiues in storage location 30)
--> We will also know the real consumptions according to the content of cost center (related to stor. 10)
In order to do that we need to change the storage location 10 --> 30 before backflush.
If we do not change it the backflush will not be done at the right place.
If we always use stor. 30, our dependent requirements / inventory level / Pur req will be mixted and we don't want that.
The production area is hard to control and the inventory there is rarely good because the processes are specials.
--> ex: huge paper rolls: Before starting a lot, we need an entire roll (to avoid stops) in fact in the inventory we have 4 rolls with remaining quantity of 0.25 (4x0.25 = 1) for example. So for the buyer we're ok, but for the operations its not enough..
I hope my problem is clearer...
Any suggestions would be very appreciated...
Regards!

Similar Messages

Production order quantity changes

Hi Guru's,
Please help me to trace the production order changes.
for example: order 1 = 100 and later I changed to 200
how can i trace it.please explain the steps to follow.
Thanks
Satya

Dear Sathyanarayana,
Production order Changes can be traced only using OCM - Order Change Management.
So you have to activate Order Change Management,Check these links
[OCM Link1|Re: Changes to item in prod order]
[Link for using an OSS Notes instead of OCM|Re: Production order qty change tracking]
Regards
Mangalraj.S

Add fields to Sales Order Mass Change selection screen

Hi,
Li & Fung customer customer needs to include following fields in the selection screen (Header Level) and the display output in Sales Order Mass Change (/AFS/MDC).
-     VBKD-BSTKD_E
-     VBKD-KDGRP
According to the SAP documentation we have done the configuration (Add details of custom fields) and implemented the BADI u2018/AFS/MDC_SELECT_CUSTOM_FIELDSu2019 with following methods.
-     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_HEADER
-     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_CUSTOM_DATA
Data selection part works perfectly, but if we do not enter any values in any custom field in the selection screen, then the BADI is not working. The output displays the columns without any value for the custom field. However, for VBKD-KDGRP is added as a custom field in the selection, but it already exists in the output display by standard, and it does display the value.
The system should display all custom fields values even if we did not input them as part of the selection screen
I would like to know if we have missed something, or is it the expected behavior of this enhancement, which seems to be inconsistent. Also please advise if there are any other methods available to solve this issue.
thanks very Much.
Nilmini

Hi Nilmini,
In My case, I have added custom fields to MDC change screen by using /AFS/MDC_CHANGE_CUSTOM_FIELDS but its not appearing in Grid list display. Would like to appreciate if you can Help me to achieve this.
Regards,
Jelli

Production order qty change tracking

Dear gurus,
In a production order qunatity change should be tracked.Say for eg prodn order qty is 100.User is changing to 200.As a client requirement they want he change historya of PIR change history.The same tracking reuired for Component change qty.plz through some light.Without OCM any other solution plz guide me
Please through some light
-Guna

Hi,
There is a way by which the quantity field in the production order can be fixed and made non modifiable
You need to create a status profile in bs02
Double click the status profile.
Enter the user status as crtd
Tick the initial status as enabled
Place the cursor on the status profile
Select the object type as PP ORDER HEADER
Now choose the user status
Double click the user status
Goto create mode
select change and set forbid radio button
save.
Assign this status profile to order type in opjh tcode.
Now once you have created the production order the system automatically forbids any change.
And
OCM is option to track it or authorization feild to restrict it.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Jul 22, 2008 10:38 AM

Production Order BOM change

Dear Expers,
How can i restrict the Production order BOM Change. Please tell me with the steps.
Other than screen variant.
Regards
Raghu

Hi,
To do this you can use below mentioned processed.
1. create a user status and give approval to the order at creation and the user will not be able to change any thing in the process order.
2. You can use user exits to restrict changes changes at "materials" screen.
Hope this will help.
regards,
kaushik

Production order mass updation of components

Dear Friends,
My production order is created and partially confirmed, and now i want to directly insert some 100 components in components overview of CO02 screen.
please suggest any mass insertion or uploadinding method exists.
Or if any BAPI exists pls tell me.
Note: Dont suggest Order Change management
Thanking you guys in advance,
Reagards,
Kumar

Hi,
You can use BDC method for this requirement
Regards,
Sankaran

WM-production order-need change the open quantity in Transfer order

Hi,
   I created the production order (order quantity 1000). i did material staging and generated TR. .
   But i need to change the open quantity in transfer order . i need to create the partial Transfer order
    against TR..
   KINDLY SUGGEST ME
   WITH REGARDS
   Dinesh

Hi Dinesh,
TO for partial qty is possible.
When you are doing material staging with 319 mov.type, you create a transfer order for partial quantity as follows:
You first create a manual transfer order using transaction LT04.
You specify the TR number in the intial screen and navigate to the detail screen, system shows the Open TR quantity and the proposed TO quantity. By default, both these quantities are equal to the TR quantity.
However, when you create by clicing the "Create TO button" (the icon with a plus sign in the tool bar of LT04 screen), system takes you to another screen where it asks for the "Requested Qty" on the top of the screen. Here you can modify the qty as per your requirement; then you can check and confirm the storage type and storage bin for source and destination stocks & save.
It is important that you give the correct source storage type & storage bin that is having stock or otherwise system might give error message.
System will create a TO line item with the entered qty and propose the balance TR qty as the 2nd TO line item. You can skip this 2nd TO item or delete it from the TO.
Once again, if you click the Save button, system will save the TO with the partial quantity.
The balance quantity will be available in the TR as open quantity and this can be seen in the header data of transaction LB03.
Regards
Prabhu

Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

PRODUCTION ORDER--Qty changed after one operation----URGENT

Dear Experts
Hope u all R doing well
In the production order,after one operation completed(whether it is first ,second or last ) the system is allowing to change the qty.
but we want the system to disallow the qty change.
could anybody can help, is there any configuration settings inside?
waiting for your valuable response
Thanks in advance

Hi,
Sorry for the delay.
Pl. follow the steps below.
1. Create a status profile Eg: s1 usng t.code bs02.
2. Enter status no. as 1, status as CRTD, a description, tick Initial status & lower status no. as 1 & higher status no. as 2.
3.In the second line enter status no. as 2, status as REL, a description, & lower status no. as 1 & higher status no. as 3.
4.Choose Object type tab.
5. Choose PP/PM: Order header.(tick)
6.Then come back to main screen & double click REL.
7.Click the create icon in the top.
8.Choose Release & then choose radio button under <b>SET.</b>
9.Then come back to main screen & again double click REL & then choose create & select change & check the radio button under <b>FORBID</b> & then save.
10. In t.code OPJH(order type), choose your order type & then assign the status profile( Eg:S1)
11.Now convert the planned order into production order.Release the order & save.
Further changes cannot be made in the production order.
Pl. give feedback after testing.
Regards,
S.D.Senthilkumar

Production order material change report

Hi,
Is there any standard report to find out the list of materials added, changed or deleted in production orders by a specific persion?
If not, which tables can I query to get the data?
Thanks,
Sincerely,
Nicky

Hi,
There is no such standard report available.
You can have ABAP development with tables CDHDR and CDPOS.
Worning: using these tables the system performance issue may come.
Cheers,
Satish Purandare

Automatic Firmed Planned Order / Mass Change Planned Order

Hi PP Gurus,
My requirement is I want to make all planned order created from planning run will be automatically firmed. I tried several option :
1. MRP type : P1, automatic create firmed planned order within planning time fence but for new requirement, planned order will be created after planning time fence date. Example planning time fence date lies on 20/10/2011
PIR
09/2011     3 pc
10/2011     4 pc
end of planning time fence date
11/2011     5 pc
run MRP
Planned order firmed for month 9 and 10. for 11 is not firmed. But the problem is if PIR on month 10 is change from 4 to 6. the other 2 planned order will be created at end of planning time fence date.
Is it possible for planned order created at appropriate date as requirement date ???
2. Mass Change of Planned Order
I browse the help SAP there is function module : MD_SET_ACTION_PLAF for mass changes of planned orders.
http://help.sap.com/saphelp_46c/helpdata/en/9e/e84226c1c311d3b54a0004ac160649/content.htm
I execute it with SE37 but i don't know what should i do with this function module after the next screen.
In my mind, there will be selection screen for choosing which planned order will be perform firmed action.
Any other idea to solve my requirement is welcome.
Regards,
Arman Lie

Dear Arman,
Use T.Code MD19 for firming the planned orders,also check MDBA for firming the planned order.
For your first question let me check and revert back.
Regards
Mangalraj.S

Sales Order Mass Change ?

Hi
Is there any standard T.code for Mass change of Sales Orders like XD99 for Customer Masters
Prasad

u can do this way too :
Go to VA05 execute the report. Select all sales orders you want to update the price, Go to the Menu EDIT --> MASS Change ---> New Pricing. System will display all the re-pricing options. Select B. It will re-price all the sales orders.
You can try for one or two order initially check the results and if it is OK, then you can do for others.
or else There is transaction MASS which can be used to carry out mass changes in the sales order and other objects.
but earliar ones the easier one.
Hope this helps
Reward if helps
Rgds

Production Order maintain/change

Hi,
I need to change operations of a production order via RFC. Therefore I found the function "CLOI_CHANGES_UPL_31" but I have no idea how to use this function. Can anybody give me an example how to change (or even better how to add) operations of a production order.
An example:
I've a PO (Nr. 60028803) including three operations 0010, 0020 and 0030. Now I need an operation 0040. How can I add this one via RFC?
Thanks for any help,
Joerg

Hi,
I would like to update Batch Number into Production Order and by using this CLOI_CHANGES_UPL_31 FM it return no error but when i checked on the BAPI_PRODORD_GET_DETAIL and found that the Batch Number did not change.
Can anyone be my mentor to guide me how to update batch number into a production order?
Thanks and Regards,
WannYang

Production Order Status Change

How can i change the Status of the Production order by using any BAPI or FM?

Hi,
Try this,
BAPI_PRODORD_CHANGE
You use this method to change certain header data in an order that already exists in the database.
CALL FUNCTION 'BAPI_PRODORD_CHANGE'
EXPORTING
    NUMBER                 =
    ORDERDATA              =
    ORDERDATAX             =
IMPORTING
    RETURN                 =
    ORDER_TYPE             =
    ORDER_STATUS           =
    MASTER_DATA_READ       =
Use threads
Re: how to use BAPI Program for change workcenter in co02?
Batch determination in production order for a component

Update of Sales Order Delivery Dates from Production Order Date Changes

I work at a discrete made-to-order manufacturer.
When our factories maintain their production orders, they will often have to change their order dates. Is there a way so that these changes can automatically update our sales orders so we can re-send sales order confirmations?

hi,
this comes under development part.
please check the feasibility with your abaper because you will have to change standard code.
regars,
balajia

Production Order Mass Change

Similar Messages

Maybe you are looking for