Production Order - Modify field Material Provision Indicator for component in the production order

Good afternoon,
I have a component in the bill of material, that has the option Material Provision Indicator activated.
When i create the production order, the component automaticaly is activated with the  Material Provision Indicator option.
However, in the production order, this field isn't possible to modify, because is closed.
Anybody knows way the modify this field? Configure to open?
Thanks.
Kind Regards,
António Pinho

Hello Amar,
I am also getting the same error while Releasing Production Order and Costing (CO11N). This error is related to EHP7 in our case.
Please try one of the following solution and see whether the error is gone or not.
1. Implement the SAP Note 1317551 - Error AD_SUBCON 141 / 143 / 144 (T417)
OR
2. Complete the customizing of Material Provision Indicator (T Code OICO) as per the attachment.
Regards,
Prashant Karanjgaonkar

Similar Messages

  • BOM (CS02) - Set field "Material Provision Indicator) automatically

    Hi experts,
    does anybody know a possibility, if I can pre-fill the field "Material Provision Indicator" automatically, on creating a bill of material?
    We would like to have L as default.
    Kind regards

    Hi,
    in the transaction CS01 or CS02, go to "Settings" > "MatProvision ind....".
    This allows you to default it.
    Ulf.

  • Negative Material cost in cost component of the Product

    Hi,
    We are in ECC 6.0 and using Material Ledegr and Actual Costing. We have cost component structure - Material cost, Packing cost, Overheads, etc. The total cost of the product is positive. However, at the cost component level Material cost shwoing as negative.
    e.g.
    Material-Cost      (-10.00)
    Packing-Cost          0.00
    Overheads        40.00
    Total cost         30.00
    It seems the negative Material cost is coming from Lower levels. I have checked this in T-code CKM3N and in Table CKMLCR/CKMLKEPH. There are no reversal of material movements.
    Will you share your views on this issue for how to identify the root cause and take preventive action?
    Thanks & Regards,
    ADI

    Hi ADI,
    The note 671767 explains possible root causes of negative cost
    components. They are usually caused by:
    1.  Negative cost components due to by-products
    2.  Negative cost components due to WIP problems
    Regards,Declan

  • Material Provision Indicator - BOM

    Dear All,
    In BOM, i find Material Provision Indicator. I would like to know how does the system treat this in terms of MRP run. The F1 help on this field indicates that indicator 'K' is not used at the moment (Ver 4.6c).
    So what impact will it have on the MRP run if i maintain 'K' or there is no impact at all?
    At the moment have some idea, but would like to be clear, so await inputs on this.
    Vivek

    Hi,
    In case of L - Matl provided by Vendor , MRP will generate Pur Req for the FG which is to be subcontracted and no Pur Req will be generated for the components with this indicator set. This means that there is no need to procure and issue the components to the vendor. The Vendor takes care of the components.
    In case of K - Matl provided by Customer , MRP will generate Pur Req for the FG which is to be subcontracted and also Pur Req will be generated for the components with this indicator set. This means that the customer has to procure and issue the components to the vendor. through ME2O.
    Hope its clear.
    Regards,
    Sheik

  • Special stock indicator for component in process order

    Hi,
    There is a field in process order where we can maintain special stock indicator for component.
    In this filed if we define consignment stock, then the vendor field becomes activated, where the vendor can be given.
    Now we want to maintain the data as a master data so that whenever process order is created the sp stock indicator as well as vendor are populated for that particular component.
    Q - where to define this master data. I could not see such fields in BOM?
    regards,
    Mohit

    Hi Sunderesan,
    Thaks for responding. Even by doing this system does not propose special stock indicator as '3' in process order & even vendor is not proposed.
    My requirement is that system should propose '3' in special stock indicator in process order.
    Request to look into this.
    regards,
    Mohit

  • Determine a component in the production order

    Hi,
    To determine if a component in the production order is relevant for the paint dispatch list:
    For a Production Order, after retrieving all the components (children) of the header material utilize function module CLSE_SELECT_AUSP.  Pass the following information under the import parameters:
    Function Group: CLSE
    Function Module: CLSE_SELECT_AUSP
    Import Parameters:
    KLART   = 001   (Hard-coded) (ZERO, ZERO, ONE)
         OBJEK  =    (Component number from production order Item) – RESB-MATNR
    MAFID = O  (Hard-coded) (The letter O)
              KEY_DATE  =  (BOM Explosion Date) – CAUFV AFKO-AUFLD
    Returns:
              Table = T_AUSP
              Field  = ATWRT  
              T_AUSP-ATWRT
    Then the following logic should apply:
         IF T_AUSP-ATWRT = OPTPNTD THEN this component (RESB-MATNR) is relevant for the dispatch list.
    can any body explain the meaning of this
    all replies will be rewarded

    Hi,
    i got the solution i came to know the meaning of it
    thanks

  • Scrap Quantity component  in the production order

    Dear gurus,
    in the material master of a component i insert the scrap % ( view mrp4) = 10 %.
    The field is read by planning Mrp and explosion of bom , but when i inseert this component in the production order manually the system don't read this % and the field "scrap quantity in the component detail of the production order is blank.
    Are there a setting for uograde this field ( in the production order ) when i insert MANUALLY the component in the production order?
    Example:
    1) material master of the component  > scrap % (view MRP4 ) = 10 %
    2) production order created
    3) insert this component quantity 100 pc and the system after read the material master  insert 110 pc , and upgrade the field automatically 10 % (as material master)?
    Thansk a lot
    Daniele Pistilli
    PP TEAM

    Hi Danielepistilli,
    Well there is a lot of difference is there: see you are creating production order for header material which is FG. If you maintained component scrap in material level it will be dependent on BOM quantity which you maintained for the header material.
    For example say component x quantity is 50 in BOM. How it will calculate when you run the MRP.
    component scrap % is 5% then:
                                     ===>            (5/100) * 50 + 50
    Formula is: Percentage of scrap quantity x original quantity + original quantity
      So                           ===>           52.5 quantity should be come for component
    So, the order quantity for the header material will not take this quantity or scrap but if you see individually in MD04 screen for X material you can find this quantity ok.
    I hope it clears your doubt and helps you any queries please revert me back.
    Regards,
    Madhu.G

  • Fixed component of the production order

    Dear Gurus,
    i need of fixed reservation of the batch at the production order.
    I can fixed the component only in the production ordere ( CO02- batch Assignment ) or are there other transaction , where for production order i can fixed the batch of the component?
    Thanks a lot
    Daniele Pistilli
    PP TEAM

    Dear gurs
    excuse me for the explication ,  i have for a component two bacth :
    111
    222
    and i need of fixed in the production order the batch for example the bacth 222 .
    Now i run the transaction CO02 and in the view of the component select the single component and whit the buttom batch assignment reserve the quantity.
    The system setting the status F in the stock /requirement list.
    I would want to know if there are other methods in order to reserve the batch component in the production order , other transaction .
    Thanks a lot
    Daniele Pistilli

  • I have a problem with the indicator for power on the side of my HP DV6-1341el.

    I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
    Where is the problem?
    I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
    If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.

    Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the  ACPI-Compliant Battery Control Method device. 
    Post your results whether they are negative or positive to keep us posted.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I want to take a series of hex characters in a string control and produce an HDLC string indicator for example if the data string control is 3F27 then the HDLC string indicator is 7E003F2700B57E

    I want to take a series of hex characters in a string control and produce an HDLC string indicator for example if the data string control is 3F27 then the HDLC string indicator is 7E003F2700B57E

    "thanks for your help "
    Does that mean you figured it out already?
    If not, see this thread for some HDLC related code.
    http://forums.ni.com/ni/board/message?board.id=170&message.id=146859&query.id=3388#M146859
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Сhange the product key for windows on the product key on a Mac OS.

    Our family purchased Adobe Photoshop for Windows, and then changed the computer to Apple IMAC, you can change the product key for windows on the product key on a Mac OS. my key for windows had not even been activated.

    http://kb2.adobe.com/cps/405/kb405819.html
    Mylenium

  • "You can not use this product at this time. Try uninstalling and then reinstalling the product..."

    Hello,
      I am a U.S. citizen who works over the internet at home for a man in the U.K. My boss in the U.K. ordered CS3 from the U.K. and shipped it to the U.S.
    For almost a year, I was able to use the CS3 products until all the sudden, I get an error message that says, "You cannot use this product at this time. Try uninstalling and then reinstalling the product or contact Adobe for technical support." Every time I try and talk to a customer service representative from Adobe, I am either put on hold for about 30 minutes, am asked to contact the offices in the U.K since the product was purchased in the U.K. or am told I can't get any support because I don't have an order number or a serial number or whatever these people are asking for. I do not have that kind of money to be making long distance phone calls to the U.K. only to receive no technical support at all. My job is very important and if my boss paid over $1,000 for the product then either he or I should get the support we need before I end up loosing my job over it. I was once promised a very new clean CS3 CD along with a new serial key for all the trouble I went through with technical support and never received it in the mail. I can give you my boss' contact info, but I refuse to quit until I get the support I am looking for. My boss' number is
    [personal contact info deleted by forum host]
      and he might be able to supply the order number.
                                                   Sincerely,
                                                          Michael S. Lowe

    Try reading this:
    http://www.megaleecher.net/Flexnet_Licensing_Service
    Bob

  • BAPI to update the bulk component in the packaging order.

    Hi ,
    I am working for the process order.
    I want to update the bulk component in the packaging order with the goods receipt batch number of the bulk order.
    Is there any BAPI that I can use for updating the bulk component or I need to use the BDC?
    Regards,
    Kiran Kumar

    Hi Kiran kumar,
    As per my knowledge, there is no BAPI for process order component update
    you need to use BDC for this
    regards,
    sankaran

  • Is there a way to order several different iPhoto projects at one time, on the same order? (to avoid paying shipping on each individual project?)

    Is there a way to order several different iPhoto projects at one time, on the same order? (to avoid paying shipping on each individual project?)

    No, unless they're all prints.
    (117535)

  • New install of SQL 2014 Std MSDN. Get "The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging."

    Trying to install a new version of SQL 2014 Std 64 or x86. Installing on Windows 8.1Pro 64bit machine.
    I get:
    "TITLE: SQL Server Setup failure.
    SQL Server Setup has encountered the following error:
    The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
    Error code 0x858C0017."
    I looked at the summary log and that is the only error.
    I made sure there were no other instances of SQL on this machine. Uninstalled all VS2013 and sql instances just in case. IF there is somewhere to check if a previous version or license is causing the issue, i would be glad to check.
    Any help would be appreciated.

    Hi,
    Please read this thread with similar issue
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bdd94577-515c-49fa-be44-008eacece057/installing-sql-server-2012-on-a-new-vm-error-code-0x858c0017?forum=sqlsetupandupgrade
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

Maybe you are looking for