Production Order not printing with Parallel Sequence ?

Hi All,
User is unable to print Prod. Orders when Parallel Sequence is used, but Orders using Standard Sequence are printing fine.
Print is done in Update Task, so User is able to release the Order and when he saves the Order, the Order should get printed.
Currently this is not happening. There is no spool generated.
Can anyone please tell me the printer configuration required for this. Or any other configuration which we are missing.
Thanks,
Bhuvan

Dear Bhuvan,
I'm not sure if this is the issue,at a high level,check if the control key assigned to the operations in the
parallel sequence supports for Printing in General(check box set).
Regards
Mangalraj.S

Similar Messages

  • GR  for  Production order not possible with  settlement receiver as IO

    Hi
    I   have  created a  production order  and  the settlement rule is  to  an internal order.  But  it  does not  allow me to do  goods receipt.    Pl  tell me  what to do.
    Thanks
    kamala

    Hi,
    SAP recommands production order settlment to be beow object and additional CO Object COPA.
    Settlement Receivers Depending on the Scenario
    1.Make-to-stock production >>The make-to-stock inventory (receiver = material) >> COPA
    2.Sales-order-related production with a valuated sales order stock>>The valuated sales order stock (receiver = material)>>COPA
    3. Sales-order-related production with a nonvaluated sales order stock>>The sales order item (receiver = sales order)>>COPA
    The scenario you are trying is doesn't fit into standard SAP framework for production order so please try said scenario with CO production order. Again CO production orders mostly recommondable without PP so figure out impact on cross modules.
    Regards,Ashok.

  • Officejet Pro 8500A is not printing with Yellow cartridge. Full cartridge and good health ...

    I have an OfficeJet Pro 8500 which is not printing with the Yellow cartridge.  Printing with the Cyan, Magenta, and Black cartridges is fine.  Diagnostics show all cartridges properly installed and having adequate ink supplies.I replaced the Yellow cartridge with a brand new XL cart, but to no avail.  I cleaned the orifice with Isopropyl alcohol and a cotton swab, thinking perhaps there was some dried ink or an impurity there.  The problem still exists.There are no error messages, either via software or at the printer itself.  The printer is out of warranty (imagine that!).I have used HP products for well over 15 years, partly because HP support has been historically excellent.  After reading some of the posts on these forums, it seems that HP has allowed their support quality to diminish - significantly.  I hope that is not the case in real life.Any ideas out there?

    I am having same problem. OfficeJet Pro 8500A Premium.  Not printing with Yellow. First replaced Yellow cartridge with new, then spoke with HP Support yesterday and was told that the Black and Yellow Printhead must need to be replaced, at a cost of $49.  New Printhead arrived today, inserted and still having same issue with YELLOW! So, for the cost of a new Multi-Pack of print cartridges (which had the Yellow I used to replace the low ink), and the new Printhead, I could have purchased a NEW CANNON PRINTER.  I have used HP Products for over 20 years - both professionally (HP Plotters) and at home (always HP Printers, Scanners, Multi-devices, etc.  I am VERY frustrated!

  • Can not print with HP LaserJet 6L since the upgrade to Mavericks.

    Can not print with HP LaserJet 6L since the upgrade to Mavericks. Any alternative driver for this printer?

    I have an HP LaserJet 5P and had the same problem. My LaserJet is connected to a D-Link ethernet print server, then to an Airport Express to support wireless printing.
    As recommended in earlier posts, I first downloaded the Gutenprint HP drivers at Sourceforge, version 5.2.9 That did not work. Then found the reference to the Apple kb here: http://support.apple.com/kb/dl907
    Downloaded these drivers. When setting up the printer, I got the autoselect option for Generic Postscript Printer and used that. Printer worked, but printed out garbage. I then deleted the printer, and this time selected the HP LaserJet 5P CUPS + Gutenprint v.5.2.9 THAT WORKED! I don't know if was the combination of downloading the drivers from Sourceforge and the Apple kb, or just the Apple kb that solved the problem, but I'm glad this is now sorted.
    I was a bit surprised when I hit this snag to begin with because the last upgrade I did from Lion to Mountain Lion, I did not have this issue. It was seamless.

  • Can not Print with HP LaserJet 5000 and Epson AcuLaser C9100

    I am using MacBook Pro 2.3 GHz Intel Core i7 with Mac OS X (10.6.6)
    I already install the latest print driver from the Apple Software Update website.
    The driver for HP is Ver. 17.5 & for Epson is Ver. 5.2
    I connect two of the printer to my Belkin Surf N300 wireless N Router with ethernet cable.
    The error when print to HP LaserJet 5000 is as follow:-
    Unable to get printer status (Not Implemented)!
    Network host 'x.x.x.x' is busy; will retry in 30 seconds...
    This error can stay forever if I do not delete the print job
    The error when print to Epson AcuLaser C9100 is as follow:-
    Printer not responding
    This error can stay forever if I do not delete the print job
    Previously I can print with my emac with OS X 10.4.10, but now I can not print with 2 of my printer.
    My 2 printer are in good condition, so this is not the printer problem.
    Please, do anyone know how to fix this problem fast, because I need to use this two printer for my business.
    Thanks in advance.

    That is not what Greg needs to know. That is just the way that the IP addresses are assigned to the printers.
    Your problem is probably that the printers were probably originally found by AppleTalk. AppleTalk is not included in Snow Leopard. If the printers support Bonjour, they should be found that way. Otherwise, you have to use other methods.
    How did you add your printers on the new computer? If you delete them from Print & Fax, how would you add them again?

  • Elements 11 will not print with Epson R2000?

    Cannot make Elements 11 work with new Epson r2000 printer.  Prompt on screen states it is not compatible or settings are not correct.  Epson tech support worked on it, said to contact without success, said to contact Adobe.  Printer works fine on all other applications.  Help please.

    Thanks again.
    Richard
    Date: Thu, 12 Sep 2013 08:49:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Elements 11 will not print with Epson R2000?
        Re: Elements 11 will not print with Epson R2000?
        created by A.T. Romano in Premiere Elements - View the full discussion
    Ollie37
    Thanks for the follow up.
    Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
    Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Lightroom 2.5 not printing with main account user but prints with a new use

    I have been troubleshooting all day. My new epson r280 is not printing with LR2.5 though it prints in other applications fine. Called epson and we are sure that I have the latest drivers, etc. Called Adobe and they had me create a new user in accounts in system preferences-accounts. When I tried printing from the "test user" LR printed with my epson printer. Adobe said the problem was with my system permissions and I had to reset my system permissions. This doesn't sound right to me. I ran disk utility and repaired my permissions but LR still doesn't print using my original user. Genius Book suggests going to Library-Preferences and to delete the plist. Does this sound right? And do I delete the p-list for LR or for the epson printer? What happens when you delete a p-list? Will I lose my catalog in LR? I would appreciate any help on this problem.

    Just trying again to see if anyone has any solutions for this question. Thanks

  • Production Order Settlement Process with respect to  a Project

    Hello All,
    I know about normal Production Order Settlement Process in discrete industries.
    Can anyone give me the steps for the Production Order Settlement Process if the Production Order is created with respect to a Project in SAP PP- PS Integration Scenario.
    Thanks in advance for your support.

    Hi Experts,
    Can anyone clarify my above queries.
    Thanks in advance for your support

  • TS3988 This product can not proceed with the activation process, service errors go I want you entered will appear this error I am a Korean. Failed to resolve service center in South Korea  Please e-mail response  iPad2 32GB Cellular Version

    This product can not proceed with the activation process, service errors go I want you entered will appear this error
    I am a Korean.
    Failed to resolve service center in South Korea
    Please e-mail response
    iPad2 32GB Cellular Version
    <Email Edited by Host>

    I'm same. Any Update or News?
    Message was edited by: koreasaram

  • Why will my epson artisan 810 will not print with ipad?

    Why will my epson artisan 810 not print with iPad?

    Because it is not a Airprint enabled printer.
    http://support.apple.com/kb/ht4356

  • Error: crm production is not sync with ecc production

    Hi Middleware Experts,
    I am facing one issue, "CRM Production is not sync with ECC production". I have searched alot but couldn't find any relevant material. Please let me know the steps to rectify this error.
    Thanks,
    Vsh

    Hello,
    Sorry forget the last note I suggest you,
    Please check the following links might be helpful
    http://help.sap.com/saphelp_crm70/helpdata/EN/28/370123814711d3ad6b0000e8a5bd28/frameset.htm
    http://help.sap.com/saphelp_crm70/helpdata/EN/46/57605601a208e7e10000000a114a6b/frameset.htm
    thanks
    Willie
    Edited by: Willie Musa on Jul 6, 2011 10:43 AM

  • Material Cost Not Shown in Production Order if planned with MD50

    Hi,
    We have run MRP MD50 for a sale order item ie FERT material which has BOM Items. All the stock of the BOM items is tranfered from Unrestricted Stock to Sales order stock. FERT ITEM planned order is converted to Production Order and all the BOM items sales order stock is issued against PO & Sales order no with Movement Type 261E.
    After confirmation and goods receipt stock of FERT is shown under sales order Stock of Fert Material.
    We can see the cost of operations but cost of materials consumed against the Production order is not displayed in Production order Cost analysis..How material cost can be displayed????
    If i create PO with out refering the sale order that is normal process i can see the cost of materials triggering in Production Order.
    Can we settle the varience when we are planning against sale order???
    Some one Pl help us.
    John

    Dear,
    Check your variant which showes the cost. See the following report
    KKAC - For Sales Order with Assigned Orders  or
    KKBC_KUN - For Sales Order or
    KOB1 - Actual Costs

  • How to release a collective production order in CO05N with MSPT?

    The issue was: I want to release a collective order by co05n, e.g. the structure of this collective production order 10000 like this:
    10000----20000
    30000---40000
                                 ---50000
    if order 50000 with material shortage, keep the customizing OPJK  release order=3, how to release this collective
    order. If it is not possible in standard, can the parallel order 40000 be released??
    Thank you, all.
    Edited by: Stephen Wang on Apr 15, 2010 3:12 PM

    Dear,
    In Transaction CO05N, you execute a collective release. For one of the orders, the availability check determines missing part although it has been set in Customizing of the availability check (OPJK) that a release can be executed for missing part per user decision. Therefore, a dialog box is processed on which options a.) 'Release order', b.) 'Missing parts list' and c.) 'Cancel' are displayed.
    If you first branch to the missing parts list and then press 'Cancel' on the dialog box there it self
    Else you can do this with these options,
    1)Use T Code COHVOMRELEASE here select order as you want and release accordingly.
    2) Use Transaction SE38 to create the variants for program PPIO_ENTRY and schedule it through SM36 or use standard variant as SAP&RELEASE if want in background.
    3) use BAPI BAPI_PRODORD_RELEASE
    Please try and come back.
    Regards,
    R.Brahmankar

  • HP 5514 not printing with brand new black ink cartridge

    Ok so I have the same issue as everyone else here - new cartridges but won't print - specifically black. Other colors print fine. Cartridges have expiration of 2016 and were made in China. I put a new one in last night - got 2 pages printed out and all was good, color printed, black printed. Woke up this morning and no black - nothing, nada, zilch. I did everything recommended - multiple passes on cleaning, checked vent holes, etc etc etc...have now lost most of my color ink from printing the test pages - still no black. 
    So my unit of course is out of warranty - so now what? Like the others - product was not overly used - a few pages a week - nothing massive. So it should still have life left you would think.
    Next steps please? Really can't afford a new printer no matter how cheap they are these days...and with no warranty - what are my available options????
    Thanks - btw I worked for HP for a number of years in a small division if that gets me any brownie points....

    Hi @LAnn15,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5514, you are unable to print in black ink.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Production Order For Project with plant stock

    Hi,
    We have a scenario where in we are required to create a production order for a project.
    But the material(raw material) is in a storage location and is a stock item. Even the header material is also a stock item and it to stored in the storage location.
    But the order is to be created for Project and to be settled to the Project. Now the system is not allowing me to create the order.
    The error is :
    "Project  does not allow make-to-order stock
    Message no. CO746
    Diagnosis
    There is no project stock for the project.
    To create a production order with reference to a WBS element the project must allow project stock to be maintained.
    Procedure
    You should select a project that allows project stock."
    Now,
    I don't want to have a project stock. How to go forward...
    Regards
    Pavan

    Hi,
    What is the strategy you are using. If you are using strategy 20, then chnage it to 40.
    Also maintain individual/collective indicator to "1" - individual in MRP-4 view. So that when the order is created, the stock will be reserved as Q-project stock.
    thanks and regards
    Murugesan

Maybe you are looking for