Production Order Number Ranges Assignment

Hello
We are facing one problem
We have internal number range for production order.
On creation System took few orders in Sequence and few it skipts and then it goes back to seq again
1st it created 1-9
then it created from 21 -26
then it created 10-15
again from 27
Request you to let me kno how we can get it sequential.
In SNUM buffer is maintained as 20.
Thanks N Regards,
Hitendra Dwivedi

Dear
This is because of user buffer, which system will allocate the number from numer range to each user so that there will not be any problem during saving, This is done by basis person. Just discuss with basis consumtant if you want to reduce the gap from one order to other.
This is not a bug, this is standard. Reason for this is the buffering of number range. You can find explaination about this bahvoir in SAP note 62077, this note descripe the behavoir in general. SAP note 456777 descripe the behavoir once again for production and process orders.
Check the above notes and explore
Regards
JH

Similar Messages

Production Order Number Range - Not Continuous

Hi Team,
I have assigned the internal number range for my order type in CO82. When the system assigns the internal number (my production order is 10 digit number) to my production order, the number is getting assigned continuously. For example, if the last created production order number is 2481000001 , i am expecting the next number as 2481000002. But system is creating some number like 2481000023. In-between many numbers are missed. Why?
Production Order Number Range Assigned: From: 2481000000, To:2481999999 (Internal Number range)
Thanks

Hi Caetano,
As described in the note 62077, i can do the following setting.
1. Deactivate buffering: Choose 'Edit' -> 'Set Up Buffering' -> 'No Buffering'.
2. If you want to change the buffer size only, enter the corresponding value in the field 'No. of numbers in buffer'.
Case 1:
If i activate the option "No Buffering" for object "auftrag", will it have any negative impact like performance of the system?
Should i need to activate the option "No Buffering" for object "auftrag" before creating the production order?
Case 2:
I do not want to deactivate the buffering. But i will set the 'No. of numbers in buffer'as ONE (1). I think with this settings, the numbers will be always continuous. Will it have any system performance impact?
Thanks

Enhancement for Production Order Number Ranges

Hi
Are there any enhancements for production order number ranges. We have the setting as external numbering but need to set the order numbers (alphanumeric) based on certain conditions.
Thanks & Regards.
Sam.

Hi Sam,
PPCO0007 .......check this one.....
i guess it is helpful
Regards,
Bhaskar

Production order number range after taking the back up from production serv

Dear all,
My client did a back up activity yesterday from production server to disaster recovery server.
After completing this activity they shut down there production server to do the testing of this new server.
Production guy converted the planned order to production order and he got a number say 2000064732, but the current number in number range is 2000080139.
But same guy created order one day before in production server that time the order number in 2000080138.
After 2 hours the system (by that time he has create more than 50 orders) started assigning the number as per the current number. Ex: 2000080140,141,142u2026
As per my observation they have maintained buffer as 20. As per buffering logic system has to skip in forward direction not in reverse direction.
But in our case the system skipped in back word that nearly 16000.
So please help me to find out the reason why the system assigned those number and on what basis.
Thanks for your help
Regards
Ramesh

See SAP note 62077, your application server was shut down, the numbers that are left in the buffer (that is, that are not yet assigned) are lost. As a result, there are gaps in the number assignment.

Number range Object for Production order Number range profile.

Hi ffriends,
 Can anybody tell me how to maintain the Serial Number Range for production order serial no.
 I working on automatic serail no generation for production order.I have one serial no range profile which I am assigning to material in material master but I don't know the number range object for that profile.
 Or can anybody tell me how we attach serail no profile to a serial no range object.?
 Please it is urgently required..........
Regards,
Rajesh Akarte

hi rajesh
in the serial number profile there are certain business procedures which will create the serial no ,kindly check whether for your procedure you have assinged whether serial number to be arranged or not
slecect the serial number profile in sutomization field( which you have specified in Material master) and select the serialization procedure and check whether the PPRL procedure is assinged,also check the serial no usage assigned
for detailed process have a look here
http://help.sap.com/saphelp_47x200/helpdata/en/3c/abc38a413911d1893d0000e8323c4f/frameset.htm
regards
thyagarajan

Regading purchase order number range assign & migo no.range assign

Hi,
Can any body suggest me , Where we assign number range for Purchase order after creation of number range?
And also where we define number range for MIGO posting, if any objects for that then give me deatils plz.
Regards,
Sohail

Hi
SPRO>Materials Management>Purchasing>Purchase Order>Define Number Ranges and assign the same in Define Document Types
,Assign the number range against the relevant PO document type
For MIGO
SPRO>Materials Management>Inventory Management and Physical Inventory>Number Assignment>
or Use OBF4 Tcode
Regards
Amuthan M

Different Production order number ranges with same order type

Dear Friends,
I am working on live project implementation.I am having four manufacturing plants.I am having one order type say PPLE, I am having two different versions say CM and CN.Now my requirement is can I maintain two different number ranges for same order types within single plant .
number ranges should be like,
Plant          Version     Number ranges
1210            CM           CM121008...
1210            CN            CN121008
1220            CM           CM121008
1220             CN           CN121008
and so on.here first two digit should be version,then plant and year followed by order number .
Regards,
Manoj Jadhav

Hi manoj,
You cant have two different number ranges for an order type in internal number range, but in external number range you can have two diffrent number ranges
for example for one order you can start with CM1210080001 and other starting from CN1210080001.
Just convince the client to have external number range
Regards,
Srini

Production Order number assignment CO01

Hello,
I'm looking to have the production order number assigned early: on entry into 'Production Order Create: Header' screen. Can this be done in standard SAP or would I need to use an exit and external number range?
Thank you, Mart

Dear Mart,
Check the number range assigned to the order type and check whether check box for external is included in CO82.
Or else you can confirm the same through T Codes,SNUM or SNRO for the object AUFTRAG.
You can enter a number between the from and To no range in CO01 and execute the same.
Regards
Mangalraj.S

Assign production order number to batch number automatically

Hi All,
I have been trying to assign production order number to batch number when clicked on create icon in t-code CO02, and successfully assigned Production order number to batch number through EXIT_SAPLV01Z_001
Question:
Now i want to assign same production order number to batch number automatically... is it possible"
If yes, provide me the exit or badi.
Best Regards,
Krishna K

Hi,
Try to use any enhancement point in below mentioned FORM.
In Program : SAPLCOKO1
Include : LCOKO1F3J
Inside below FORM.
FORM header_update.
DATA: flg_q_upd.
DATA: quan_old LIKE caufvd-gamng.
ENHANCEMENT-POINT header_update_01 SPOTS es_saplcoko1 STATIC.
ENHANCEMENT-POINT HEADER_UPDATE_05 SPOTS ES_SAPLCOKO1 .
BR,
Vijay

Production order number generation

hi,
i want to modify the format of product order number that system generates after creating the new order in create production order(Transaction code co01) . please help me out and tell how should i procede..
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Jun 7, 2011 12:38 PM

Hi
This is a widely used sceanrio in Automotive.Engine ,Chasis are tracked through equipment serial number.
Serial Number can be internal (Assigned by SAP) OR it can be external.The general convention is to follow the numeric range but you can also go for Alphanumeric code.We have used only first 2 digits as alphanumeric balance were numbers having differenet significanace like
Product group
Line
Model
Year
what you are saying can be achieved by entire numeric sequence also.
You will have to define Equipment category , serial number ranges under Plant maintenance..technical objects through SPRO.
Please aslo note in Material master you have to define Sr.no.Profile also.
regards
Prakash

Production Order Number and Batch Number same during order creation

Hi All,
I wanted to keep the Production Order number and Batch Number same during creation.
How I can do that during creation of order only. So during creation same number to be get assigned automatically in the background.
One thing I can maintain ; the same number range for both.
But how to activate other functionality.
Regards,
Amit

Hi SAP2511,
For Production order-
1.You can define a Order type and Mantain the number range same as batch number range (in OPJH transction)
For Batch
1.Activate Automatic internal batch assignment - (OMCZ)
2.Number range for batch - for object - BATCH_CLT - (OMAD)
For batch creation at time of Order creation -
You can create Automatic batch at the time of order creation or order release
1 Create Production scheduler Profile(OPKP) and assign in Work scheduling view of material master for which you want to create batch at the time of order creation or release.(Select automatic batch creation at the time of release or creation in OPKP)
Things to be taken care -
1 . What if you set deleation flag for order?
Regards
Girish
Edited by: girish khobare on Aug 20, 2010 9:31 AM

Production order number in a purchase order

Hi guys,
Is there anyway I can pull the production order number onto the related purchase order(i.e, if a purchase order has an item which is procured for a production order ). I'd appreciate your ideas and suggestions on this.
Thanks
Cheris T

Hi Cheris,
If the purchase requisition is created as a dependent requirement for an assembly as a result of MRP, then the account assigment is done automatcally by system to the production order of the assembly. You can see it by clicking on the Account assignment tab on the purchase requisition or purchase order.
If you are manually creating the Purchase requisition,then you select the Account Assignment category as "F" order.
Hope this clarifies your query.If you are satisfied reward points.
Thanks and regards
Murugesan
Message was edited by:
MURUGESAN THANGATHURAI

How to change Production Order Number in CO01

Hi,
I have requirement to change the system provided production order number AUFNR to alphanumeric while creating Production Order in CO01 based on plant(WERKS) and Order Type(AUART).
I have tried using below exits:-
PPCO0006    - no exporting parameter for AUFNR
PPCO0001
IQSM0001     - doesn't getting triggered
But unable to resolve the issue.
Please suggest any EXIT/BADI to meet the requirement.
Thanks,
Mayank

Hi Dengyong,
Thanks for your reply.
My doubt is, Order type is already created in the system and whenever I am trying to change the number range it is asking for 'Numeric type only'. I am trying to do the same through CO82.
We have to change the number range of Order Types which is already created in the system. Is it possible???
Thanks
Mayank

Service order number range creation

Hi,
Could anyone please tell me how can we create service order number range if we have done a new service order type creation, and what should we do: should we create the number range in development and then transport it to the production or we should directly create it in production.
Thanks and Regards

Hi,
Please guide me what should we first do to transport the service order type transport request to prd.
1.Should we first transport the request for other components of the service order type?
2.Then should we transport the request for number range or we directly create it in production server?
Please guide.
Thanks and Regards
Edited by: MPVash Vash on Sep 8, 2008 7:53 AM

Demerger Purchase order number range.

Hi Friends,
We have demerger of 1 of hte business of the company & new entity will be using same client which we are using.
We will be Creating new Purcharse orders with open amounts for new legal entities.
Here requirement for purchase order number range is as belows. How can we achieve this.
Our advice for number range is to use a prefix + old PO number, to ensure the incoming invoices can be easily assigned.
Thanks,
Kiran

HI,
   You may define external number range as shown below, for example:
   Assign the same as external number range for the PO Doc type:
   While creating the PO, maintain the number range externally with the required prefix + old PO number.
Test the same and revert back.
Regards,
AKPT

Production Order Number Ranges Assignment

Similar Messages

Maybe you are looking for