Production order - post date - cannot change

Hi,
could anybody, especially from SAP, explain me the background and reason, why user cannot change the PostDate field in OWOR table of production order after the order is created?
And seccond related question is, why item gen. entry and exit are with date, which is in production order as PostDate and user cannot change it as well?
Real situation:
User creates production order and sets as postdate April 2008. PM will order the material necessary for this production order and the material will arive to the stock at the end of May. At the end of May is posting period for April blocked already.
So now user has no chance without opening the posting period to finish the production order.
Opening and blocking posting period isnt solution for user. Im asking, because now we are implementing new customer and I know, that there will be the same problem and I would like to solve it before he will start.
Thanks a lot for make it clear for me.
Petr
Edited by: Rui Pereira on Aug 6, 2008 4:03 PM

Dear Petr Verner,
1st to clarify your question currently It is not possible to change the Order Date ( Posting Date) for the production order ( to set as "Yes" in OWOR).
2nd, For any change you need in the system behavior, you need to go through Note: 1028874, and post the message accordingly.
3rd on UDF ( User Defined Field), I suggested you to attach and UDF for the Production order (UDF as Date format), and you can record the changes ( date when you want the order to be changed).
Note:- UDF will not effect accounting, but only for record and information purpose.
4th As I understand form your example, you say that An Production order A created in April, its Child Items comes in May.
Later you make Issue for Production. Which you say the JE for Issue for production will happen in April ( though the goods have come in May).
And Receipt for Production will happen in May, which is ok.
Please clarify the 4th point.
Regards,
Raghu N
SAP Business One Forums Team

Similar Messages

  • Profit center field in production order master data in KKF3

    Hi GUrus,
    is there any way of mass updating the profit center field in production order master data in KKF3 transaction. PLease help
    Anusha

    HI charlie,
    When i try to change the profit center, the system gave this message. We already have a profit center for a production order and we need to change the profit center, That is when we are getting the errror message.
    You have changed the profit center from AR00620800 to AR00620301. This is only allowed when the corresponding configuration was made in Customizing. Then this message is only a warning, which you can ignore.  PLease help
    Thanks
    Anusha

  • Production Order Completion date

    Hi All,
       Can I know from which table can I get the production order completion date.

    Priya,
    There are different thoughts as you did not clearly explain what you meant by Order Completion date.
    If you are looking at based on,
    Confirmation then AFKO-GETRI
    Goods Delivery then AFPO-LTRMI
    If you are looking at Based on Status CLSD then you need to find the status change document using table JCDS-TJ02 with referance to the Object Number of the Production order from AUFK table.
    Regards,
    Prasobh

  • Production Order  Start Date

    Hello All,
    I am facing a problem in a Production order.When I am trying to change the  Production order Start date  and saving the changes I am getting a termination error (program termination).
    The error message is as below
    Nested call of PERFORM ON COMMIT: NESTED_PERFORM_ON_COMMIT caller: SAPLMCEX program: SAPLMCEX form: MCEXLOG_WRITE_04_DIA
    Regards
    Dhananjay

    Hi
    Check for the order scheduling parameters and confirm that the order in past are also allowed.
    Krishna

  • Production order status was not changed to 'CNF' after final confirmation.

    Hi guru.
    I experienced very special case that production order status was not changed to CNF after final confirmation.
    I did final confirmation and canceled confirmation. (CNF -> REL)
    And I did final confirmation again because of fixing activity quantity.
    the strange thing is that production order status wasn't changed from REL to CNF.
    I did  confirmation again with 0 activity, thereby  I solved this problem
    BUT i don't know why this case happened.
    Please, explain the reason.
    Thanks.

    Hi,
    As per my observation, their is not any change in the status of the order REL with confirmation CNF, instead of this, it has change from CRTD & then to TECO.
       Sequence of the status of the order as below
    1) CRTD MANC NMAT SETC
    2) REL  NMAT SETC - Changes from CRTD to REL after releasing of the order
    3) REL  CNF  PRC  CSER ERTR OPGN SETC -  After confirmation, it updated after the order REL status.
    Rgd,
    Chetan

  • How Production Order finish date and time is being comptued by SAP?

    Hello Expert,
    How Production Order finish date and time is being comptued by SAP? for example, we create a Production Order via CO01, the basic start date is 29.09.2008 and time is 04:00 it gives us basic finish date is 29.09.2008 and time is 13:28.
    how does SAP compute the time 13:28 as it finished time
    Please explain me briefly.
    Thanks
    Ryan

    Hello Guys,
    When we create Production Order in R/3 the time is calculated by routing but it is extended at SetUp machine time. It is not correct?. SetUp imachines time used only for first Production Order for the same product and it is plan manually, for others Production Order we need calculate time for production without SetUp machine time being pick up to compute finish time. how could we achieve this? only those Machine time will be check.
    thanks

  • Service order posting date error.

    In DBM Service order posting date is taken from the controlling document because of that error comes as
    Document date 03.12.2011(Curent date)is greater than billing date 02.12.2011(Date given in Billing date in service order header)
    But this error is not coming in sales document..
    I need to post service order in the date i mentioned in the service order..
    How dould i resolve this issue..?

    Hi Arvind,
    there a many notes describing this problem:
    1474254, 1473093, 1422246, 1482159, 1588751, 1359333, 1658317
    Best regards
    Robert

  • Sales Order Posting Date on Invoice PLD

    Hello,
       I am trying to post a Sales Order Posting Date to our Invoice PLD.  It is not native information to the Invoice PLD so I will probably need to create a query which I can then place into a UDF on the Invoice.
    Any out there have a solution?
    Thanks.
    Edited by: Arellano Mario on Jul 8, 2009 1:16 AM

    Hi
    Sorry , for keeping messing up :
    38.45.0 is referring to Invoice row level base key
    logic is saying  Delivery number is equal to invoice row level base key
    If you look at the link and Gagan answer ,your problem should have been solved .
    Please close this thread if your problem is solved .
    Thann you
    Bishal
    Definitely need a coffee to start my day
    Edited by: BIshal Adhikari on Jul 9, 2009 6:44 AM
    Edited by: BIshal Adhikari on Jul 9, 2009 6:44 AM

  • Track production order ststes histry (Status change date, time, user)

    I want to track a production order status change history. Status change date, user name and status. Appreciate if somebody can give me a T Code, SAP report or a table.

    HI,
    You can see the the date, time and user for the status changes by following the menu path given by Mr. Mangalraj.
    However if you cant see them, then check the T Code OPL8 (for PP and COR4 for PI), implementation tab. Tick the check boxes for for Status Change Documents as your choice (for header, operations etc).
    After checking these boxes you will be able to see the status change details.
    Hope that helps.
    Regards,
    Rohit.

  • Production Order Master Data tab

    Hello Guru,
    we have question, in the production order itself, in the master data tab we find weird thing, in the production version it pick PV01 (has inactive bom), in routing field all was been filled up, while in the BOM field it was been blank? why this happen? is it possible BOM is not explode since it was inactive but it create production order?
    I doubt that there were changes occured some where in the BOM or in the material master data of my material but in doc changes i cannot find, is there any way deside looking at the mat doc changes could i find the changes?
    thanks
    Edited by: Ryan on Dec 15, 2008 9:42 AM

    Hello Guru,
    I finally find why this happen to us, the order come from a planned order which converted via CO41, but why thus when i production version was indicated in creating a planned order (MD11) which has alt bom that is in inactive status already, SAP allows the conversion/creation of production order?
    Any inputs R.Brahamankar?
    Thanks
    Edited by: Ryan on Dec 15, 2008 12:09 PM

  • SAP IHC PAYMENT ORDER - posting date prior to Current posting date

    Hello folks,
    I have a general question about SAP-IHC module.
    While creating a manual internal payment order using IHC1IP transaction code, if I change the "Date Executed" date, the system allows to post the payment order in closed period(posting date prior to the current posting date(for the Bank area in F9B1), i.e. the payment items posted, contained in the IHC payment order, has an old posting date, which is prior to the current posting date of the Bank area - Is this normal?

    Dear,
    Check with settings in OLMR transaction.
    Invoice Block - Set Tolerance Limits [Transaction : OMR6]
    Here you need to add New entries with - Tolerance Key : LD and company code and set the limits. Please check the documentation which available read as below:
    LD: Blanket purchase order time limit exceeded
    The system determines the number of days by which the invoice is outside the planned time interval. If the posting date of the invoice is before the validity period, the system calculates the number of days between the posting date and the start of the validity period. If the posting date of the invoice is after the validity period, the system calculates the number of days between the posting date and the end of the validity period. The system compares the number of days with the with the absolute upper limit defined.
    Regards,
    Syed Hussain.

  • Production order control data tab

    Hi,
    Is there any chance the costing data under control data tab in production order can make out "grayed" so that users can not change costing sheet, RA key.
    Thanks in advance.

    Dear Sprint,
    Try with SHD0, make the field as display only
    [http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    [http://sapfunctional.com/General/ScreenVariants/Index.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fb015111d396480000e82de14a/content.htm]
    If possible take help from technical person
    Regards
    Madhu

  • Production order TECO date..

    Hi All,
    I want to see the TECO date of production order.
    How I can see ?
    Thnx n Rgds,
    Bharat

    Hi Bharat,
    Go in coois in that select list at Header level and status profile as standard Profile and put that order number in order and execute the program you get list in that go in change layout in that select change date and add in column and enter you get the date on which teco was done for that order you also select the Entered By that by same way this is person who done the teco.
    For Error "Change document not active for order" go in T.code OPL8 in that select your order type and plant combination in that on IMPLEMENTATION tab in that active status change document for your order type then this error not come and you see the status changes in the order itself.
    Hope this will solve your problem and reward with point.
    Regards,
    Rajesh Tayade

  • Production order confirmation date & time not matching with MB51.

    Hi All,
    We are facing a problem when we confirm production order in a local time zone but when we go and check the material document MB51 , we find the posting date and time is showing System date and time and not the local date and time - in the month end we are facing the problems in reports preperation.
    Please find the example as below-
    Step-1
    I do confirmation of Production order 101939015 for the Plant 2041
    on 03/12/2007 at 11:39:33 ( USER TIME ZONE),
    Step-2
    Now go to the MB51 (Material document list)and check the posting time
    - here the posting date and time is 03/11/2007 & 23:39:37. ( SYSTEM TIME ZONE.)
    Material Document Number : 4909412794
    From the above example we can see that the production order was confirmed in USER TIME ZONE ,but the document was posted in SYSTEM TIME ZONE, which is not acceptable to the USER, as in the month-end he is not getting the correct Reports. User wants a harmonized date & time.
    Can anybody give some solution its very urgent.
    Nitin.

    Hi Nitin,
    Can you check the confirmation time in the system by displaying confirmation and then there look for "Admin" data.
    Also let us know whether Confirmation/Goods Movment is online update or run in background as job?
    Please let us know your findings,
    Regards,
    Prasobh

  • Production orders: Master data updating

    Hi everyone,
    This is my scenario:
    I had created hundreds of production orders with a previously defined BOM and routing. Now both the BOM and the Routing have been modified.
    I was wondering if there's any way for updating the master data in all the former production orders without doing it explicitely accessing one by one.
    Points will be rewarded.
    Thanks and best regards.
    Ben.

    Dear ,
    I hope you can do it by Mass processing of  Production .
      Logistics ---Production -- Production Control  Control --- COHV Mass Processing to go to the Mass Processing Production Orders screen
    Transaction Code :
    COHVOMPP
    Here u have to capacity and availability check for all the orders.Now u can include the function in the Mass processing tabe page in COHVOMPP ok  and also set the error log.Once u have executed a list of PO will be displaed and u have select all of them and hit the mass procesing button.
    2.In case your order beyond the shop fllor ,u can do it through Order Change Management 
    3.Or U can perform Read PP Master Data in the CO02 --Function tab  which will ask u to include your BOM/Routing.
    Hope it will help u to clear ur idea.
    Reward point if useful
    Regards
    Jia

Maybe you are looking for