Production order printing error in script

Hi ,
I am facing problem while running Tcode co02,
Element BARCODE_AUFNR_MATNR window MAIN is not
defined for form PSFC_PRINT_LAY
This layout is the standard one,no one has modified it.
How to rectify this.
Thanks in advance.
Regards,
Bathri

Hi,
Try searching in the OSS messages if any available or something happened at the time of upgradation or support packs etc.. kind of stuff.
Also can approach SAP OSS help.
Regards,
Santhosh.

Similar Messages

Production order print out

Hi friends,
i would like to know the configuration setting required for shop floor paper print out like producton order, confirmation, time ticket etc. i have checked execute printing in opkp. in control key, print, print time ticket, print confirmation are checked . in co04, and co04n i am not able to get the production order print out.
in opk8 please tell the required confirmation in detail (step by step)
regards'
Arun

Need to do the setting in OPK8
first check the configutaion link below and then come bsck w/yr doubt
http://help.sap.com/saphelp_40b/helpdata/en/3a/72369adc56d11195100060b03c6b76/frameset.htm

Production order Printing status

Hello,
In which table , the status for the production order printing is stored, say , it printed n times or never printed etc,,
Thanks for the help
Nic

Hi,
The table JEST stores the status PRT indicating that order was printed (Original), any subsequent printing is only a reprint.
There is no logging of reprints.
Regards,
Vivek

Production Order Printing has no WBS Reference

Dear Sir,
We have Make-To_order scenario and using PP & PS both . All our Production Order have Assignment as "WBS Element" . In the Production Order Print , we are not getting WBS Element printed . We need that WBS Element also must be printed on the Production Order Print .
I request SAP experts , to kindly guide me as how can we resolve the problem .
Regards
S M Mittal

Dear Sir,
Thanks for reply .
We are using Strategy 40 .
Regards
B Mittal

Error in Production Order print

Hi PP experts
I am trying to print a production order using co02. It gives the following error.
[Element_ROU_TEXT_SHORT window MAIN is not defined for form PSFC_PRINT_LAY]and
I am using PSFCCOBJL program
and using PSFC_PRINT_LAY form
please suggest what can be done
Thanks

Dear Rajesh,
Smartform PSFC_PRINT_LAY has error. It appears that Element ROUTEXT_SHORT has not been defined but is used.
You can check this:
Go to transaction SMARTFORMS -> enter SMARTFORM Name -> Choose execute -> It will take you to funciton builder with a function name (Smartforms generate a Function Module when activated) -> Execute -> Provide values -> Execute -> It will display the error.
Regards,
Naveen.

Production Order Confirmation Error in "BAPI_PRODORDCONF_CREATE_TT"

Dear all,
            Recently i've faced some problem regarding "BAPI_PRODORDCONF_CREATE_TT". whenever it'll create the production Order the system show me an error 'Two operation times are not in ascending order'. What's that it mean? i've only 1 operation in Routing. Can anybody please help me to figure it out.
regards,
sameek mazumder.

Dear Santosh,
                      I've already do this into ascending order like START DATE: 10.02.2011
                                                                                START TIME: 06:00:00
                                                                                END DATE: 10.02.2011
                                                                                END TIME: 07:00:00
BUT THEN ALSO IT WILL SHOW THE SAME ERROR.
REGARDS,
SAMEEK.

Production order Confirmation Error

Hi All,
Need your help on a Issue we are facing. The user is trying to do confirmation using co11n. After entering the order number and operation the system is throwing the error below
formula &1 for calculating work contains division by zero
The &1 stand for a labor calculation formula. We have checked all the parameters defined in the formula and find that there is no divide by zeror issue in any prameter.
This is the formula that is throwing the divide by zero error:
Formula:            Setup Labor + (Labor / Eff. Factor * Op. qty./ Base qty.)
Std Units:          H + (H/PROPOR * NoUnit/NoUnit)
Std values:        0.00 +(0.00 /100 * 1.00/1.00)
Any help in resolving this issue would be great.
thanks and regards,
sharath
Edited by: sharath nelaturu on Sep 28, 2011 2:10 PM
Edited by: sharath nelaturu on Sep 29, 2011 5:12 AM

Dear,
Kindly check routing for labor field. If you have maintained labor as standard value, you must have maintain any figure in routing.
After maintaining labor field in routing, kindly re-read master data of production order.
Check and revert back.
Thanks
Muhammad Ashfaq

Production order create error!!

Dears
While I create a production order t code co01, I am getting a error message when i click Material avilabilty(Cntrl+F4)
No current missing parts list exists for order (new availability check)
Message no. C2017
Diagnosis
The missing parts list shows the result of the last overall availability check.
No missing parts list can be displayed for your current order (&) for one of the following reasons:
Within the transaction no overall availability check has been found yet.
The order was not a part of the last overall availability check (for example, in the collective order).
After the overall availability check an individual check was carried out. This individual check deletes the result of the last overall availability check.
Procedure
Carry out an availability check for the order.
But when i release the order and i check material availabilty system is not showing any error
All my compenent are in stock for the producion(Really no missing part list for this order)
Regards
Abu Fathima

Hi,
At first check in OPJK if checking control is maintained for your order type and plant combination for business function 1 (Check availability during order creation) .If you are still getting the error then check if checking rule is assigned to this or not under material availability.In standard it will be PP checking rule.
Thanks,
Ravi

Production order creation error?

Hi,
when iam creating a production order PP01 after planned order,custorder MRP run iam getting the following error.
Sales order has no CO object
Message no. CO323
Diagnosis
The production order should be settled on the sales order.
The requirements type of the sales order, however, refers to an account assignment category that does not allow settlement using the sales order (key consumption posting).
Procedure
1. Check which requirements type in entered in the relevant sales order item
Display sales order
2. Check the settings for this requirements type in Customizing
(See Control sales order-related production).wing message.
Can anybody guide me how to solve this.
Regards,
Reddyy

Hi,
Requirement type is nothig but Strategy.
As in you question, check requirement type for the sales order and customising setting (define strategy, group)
Madhava

Production order print out in CRTD status.

Dear Expert,
Please guide me for how to take print out in CRTD status for production order.Has a work around I try to create status profile but still not able to make it.
I dont want to change the settings in BS22,since its effect globally.Please let me know how to create the status profile for the same to allow system to take print out in CRTD status,since I read the others thread mentioning that it is possible with status profile.
Regards.
Swapnil

Swapnil,
This is not possible without changing system status in BS22 for business transaction RMDR for status I0001.
Check below SAP note 157422 - PM/SM: Printing orders in status Created for more details.
And I do not think this can be done with Status Profile in oder.
Br
KK

Production order Printing issue

Hello,
when we are trying to print the production order and pick list through co01 or co04 ,it is printing two times, where we can control the settings, we want only one printing , Thanks for the help
Nick

Hi Nick,
Check in the OPK8 in the 'List control for transactions' in that whether you have given in column number of printout - 2. There are two fields "Number of printouts" check both and Remove it put it one.
regards
ramakant
Edited by: ramakant shekapure on May 18, 2010 12:25 PM
Edited by: ramakant shekapure on May 18, 2010 12:54 PM

Production Order Printing CO04N

Hi,
We have a issue while printing production order with T Code CO04N. The print output shows all operations other than those which are subcontrated. I have tried changing the print option in contol key but it doesnt work.
can anyone please suggest any probable cause of the same.
Thanks
Rohit

Hi
check below SAP help: What is the status of the operation for subcontracting?
Lists of Operations
Note the following when you print lists of operations:
Is Customizing set up in such a way that the control key for the operations is checked when printing lists?
If this is the case, you must check whether the control key:
permits the printing of operations
permits the printing of time tickets
permits the printing of confirmation slips
If the control key check is not activated in Customizing, the system does not check the control key or the status. In this case, the system also does not set a print status.
Does the status of the order and the status of the operation permit the list to be printed?
If the order status does not permit printing, the system does not print a list.
If the order status permits printing, the system prints a list. Operations whose status does not permit printing are not included in this list.
The printing of lists is permitted if
the order is either released or partially released
the order is neither technically complete nor deleted
The printing of individual operations in an order is permitted if
the order is partially released or released
the operation is released and not deleted
Do you want to print time tickets or confirmation slips?
In this case, you should ensure that the specified number of time tickets or confirmation slips for the operation is greater than zero.
The number of time tickets or confirmation slips is proposed from the work center. However, you can change this on the General operation detail screen. To reach this screen choose in the production order. Select the relevant operation and choose .

Production order reversal error

Hi all,
I am trying to reverse a collective order activities using CO13. I am getting an error
Confirmed activity must not be smaller than 0 (check entry)
Message no. RU033
I need to reverse the production order confirmation, pl help me in solving the issue.
Thanks in advance
Amar

Amar,
This error is caused when one or more confirmed activities result in a negative value upon cancellation. Can you check the activities that you will be cancelling when you cancel the confirmation. Also pay attention to the units.
Anoop

Production Order Print - GI Slip Problem

Hello All,
First, let me Wish You all a Very Happy New Year 2009.
Coming back to my query.
I have a issue, in which i when i take Prints of the Production Order, i am not getting Print of the GI Slip.
Print settings in OPK8 are kept at SAP Default.
Can you please help me with this.
Thanks in advance,
Harris Panchal

Dear Sree...
Problem is not that i am NOT able the Print, the Problem is that i am ABLE to do so but not getting GI Slip from it.
Requesting you to kindly go through my question again and hoping for a solution.
Harris

Production order print program

Experts,
could some one please help me understand the following terms and functions in very layman terms
1. print program (report name?), form routine, sap scriptform with respect to Production order in OPK8. Can some one please explain who each one of these is interlinked when printing an order
2. what is output type and why it is not necessary for production order? I mean why standard sap does not provide output type for production order.

Hi there,
I would like to suggest to check out some information / available documents which will give You a good overview, such as general OSS note about prod. order printing; ex. 11104 is a good one:
http://www.sapossnotes.com/2010/12/sap-note-11104-pppr-general-note-on.html
Here You could also find, that there is no output type but list name - used in prod. ord printout forms.
I hope this will help.
Br

Production order printing error in script

Similar Messages

Maybe you are looking for