Production order problem

dear guru,
  i have problem in production order.i hve quantity in production order but when i conferm it with t code co11n  the quantity does not show there
Pls tell me any solotun for it.
Edited by: Isabelle Britten on Jun 10, 2008 3:01 PM

Hi Singh,
In OPK4
In the last tab(operation Indv.entry)
Under quantities
tick the first & last
You will get it
Even in CO11n you press actual data you will get
Rgds,
SVP

Similar Messages

  • Component in production order -problem

    Hi all,
    In one of my scenario, I am not able to understand system's behaviour as per my following observations:
    1. In Production Order - in Component List, system shows full quantity under the column Quantity withdrawn. To my knowledge, this indicates, component quantity is issued(with drawn) to order.
    2. But Production Order status does not shows as GMPS. It shows only REL PRC MACM SETC
    3. And I am not able to find out any issue movement (201,261,543......,) against that component in MB51. I have just entered component number and executed MB51. I am getting only 561 mvmt and 261 mvmt for some other order for different quantity. Nothing relevant to this production order.
    4. In COOIS, under component overview, I am getting information as Planned qty 30 and Withdrawn 30.
    5. This material is to be issued thru 543 as the operation to which it is assigned is external processing.
    In production order item detail also shows as 543 mvmt and quantity withdrawn also as 30.
    6. I verfied that external processing PO component list also. This component does not exist there.
    I am totally confused based on the above system's behaviour. What could be the problem?
    Can anyone throw some light on this issue?
    Thanks in advance.

    Dear Jeevan,
    I assign one operation to external processing by control Key - PP02.
    When i create production order , PR is generated for the external operation.
    In this when , i see COOIS report at component level , qty withdrawn  shown as zero.
    But when i relesae PR to PO for the external opertaion , there is qty shown  in  qty withdrawn column  ( Same as qty required ) ?? in COOIS report.
    But i have not issue any qty, than why there is qty shown in qty withdrawn column.
    Regards
    Vin

  • DTW -Production Order problem!!!

    Hi all ,
    I am trying to transfer Production Orders of Type ' Production'. The orders are in various states such as Planned, Released or Closed. I have put the code P for Planned, R for Released and L for Closed. But it is not getting transferred even if the error messege it shows says the codes should be P for Planned, R for Released and L for Closed. Similarly I am also confued about the various codes that I should use for the Type of production order ie Assembly, Sales, Production and Template.
    Plz help me out with proper tested code for Order status and order type.....

    Hello,
    I will describe as follows what you should put into the production order DI template into ProductionOrderStatus field/column (B) and ProductionOrderType (A) :
    A. Prod. Ord type :
    1. boposPlanned
    2. bopotSpecial
    3. bopotDisassembly
    and :
    B. Prod. Order status:
    1. boposPlanned
    2. boposReleased
    3. boposClosed
    4. boposCancelled
    you must select one per one production oder. The mixture is allowable. If you want to post more than one type of one status, you can do that but one production order requires only one status and one type.
    Rgds,

  • Error while issue material against production order

    Hi,
      In our development server recently we have created on ecompnay code and plant by copying the one existing company code and plant,  now for this new plant I have created new profit center with KE51  and after that I have create done cost ceneter in that this new profit center is assign   now while goods movment with MB1A with movmen type 201, 202  it works OK system is not giving any error  but while issue the material against production order in MB1A with movement type 261 system is giving error message
    No postings can be made to profit center DUMMYBAOPC in company code MT50
    Message no. KM183
    Diagnosis
    Profit center DUMMYBAOPC cannot receive postings in company code MT50.
    this profit center DUMMYBAOPC we use in old compnay code and for this new company code is not activated  for new we have new profit center  then it is  linking to that  what can be the solution.
    regards,
    zafar

    Hi,
      After asigning new profit center in the Production order problem solve.
    regards,
    zafar

  • Problem with prod. ver. explosion to production order

    Hi
    I have problem with production versions. I have FERT with 3 production versions. Additionaly we have Z-program (on Z-table) which control parameter sold to party (from sale order) with production version. So after MRP I see in planned order right production version for example 3 - field PLAF-VERID; in master data in planned order I see right alternative BOM and routing; but when I make a conversion to production order I see that system always explode 1st version; additionaly in planned order in components (button)  I see 1st pr.ver (1st alternative BOM) and in Bill of Material (it seems like to manually expolding BOM) I see right version??? But it couldn't be like this that to have right data I need to go to transaction MD12, explode BOM manully, save and after that make a prod. ord.
    I would like to system explode BOM according to production version (field VERID) already in planned order; so after that it should be that when I will converted it to production order I should have right BOM and right routing from production version signed in planned order.
    I know it sounds complicated Add. in configuration all parameters are set right to explode BOM etc. etc. system version: 4.7
    Thanks and regards. Joanna
    Additional info: I cancel this question cause problem is in Z-program; becuase when according to Z-table system change input in field VERID for system it is only "digital" not parameter for which system should explode right BOM; sorry for disturbing, we need to change Z-programm; I do not know how but maybe any function module can help - we will think. Regards
    Edited by: Kostkaj on Aug 17, 2010 10:25 AM

    HI
    Check this link and find valuable suggestion by Mr Mangalraj regarding selection of PVs
    Produciton version selection in MRP
    Regards
    Anupam Sharma

  • Problem During Creation of Production Order

    Dear Sirs
    Hope you all are well. I am facing a problem in PPDM during creation of Production Order which is that when I try to release the order System shows me material availability error for BOM items but when I check those material in MMBE(stock overview )all materials are available in UN-restricted use stock. I am facing this problem and not able to resolve it please help me out in it.
    Thanks
    Regards ,
    Haseeb Khan
    Senior Consultant

    Dear
    Did you maintain Work Schedulimng View of the Material ??
    Did you maintain any Production Storage Loaction in MRP2 view and same is appearing in Goods Movement Tab in CO11N screen with Movement Type 101 ??
    Did you maintain the Operation Control Key -pp03  which should have Auto GR check box marked in OP00 ?? Goto Operation Control key -Detail information -Check whther Auto GR is marked or not ??
    If you are using Serrial Number Profile and Serial Number , then Auto GR is not possible .Make sure that you are not haveing functionality because it does not support Auto GR fro serialised material and need to do it through MIGO/MB31/MB1C.
    Make sure that you have used PP03-Control key only at last operation not all the operations.You need to maintain PP03 at Routing level and call the function by Read PP Master data  at production order level   (co02-function read pp master data )
    Regards
    JH
    Edited by: Jiaul Haque on Feb 14, 2011 12:55 PM

  • Bins problem while creating goods receipt for production order.

    Hi All,
              I am facing a problem with selection of bins while creating goods receipt for production order in transaction MB31 and MBBE.
    The order of filling bins is with respect to storage Unit not by document no, Please suggest something.
    The scene is like that.
    The bins are not filled in the proper sequence, the system checks for the empty bins and filled those later on.
    like this,.
    Typ StorageBin  SC SS    Stock Avail.st BUn GR Date    DocumentNo Storage Unit         Time   
    SLoc Batch      Re IA PutawayS Pick qty Cert. No.                                                                               
    VN1 106A088                 0        0  CS  01/25/2010    4739297 1005721391           10:00:59
    100  0001020069            60        0                                                        
    VN1 107B076                 0        0  CS  01/25/2010    4739298 1005721392           10:01:01
    100  0001020069            60        0                                                        
    VN1 108B076                 0        0  CS  01/25/2010    4739299 1005721393           10:01:04
    100  0001020069            60        0                                                        
    VN1 109A077                 0        0  CS  01/25/2010    4739300 1005721394           10:01:06
    100  0001020069            60        0                                                        
    VN1 110B079                 0        0  CS  01/25/2010    4739301 1005721395           10:01:08
    100  0001020069            60        0                                                        
    VN1 106B088                 0        0  CS  01/25/2010    4739302 1005721403           10:01:11
    100  0001020069            60        0                                                        
    VN1 123B158                 0        0  CS  01/25/2010    4739303 1005721389           10:01:13
    100  0001020069            60        0                                                        
    VN1 124A160                 0        0  CS  01/25/2010    4739304 1005721390           10:01:15
    100  0001020069            60        0                                                        
    VN1 118A133                 0        0  CS  01/25/2010    4739305 1005721396           10:01:17
    100  0001020069            60        0                                                        
    VN1 119A128                 0        0  CS  01/25/2010    4739306 1005721397           10:01:20
    100  0001020069            60        0                                                        
    VN1 120B162                 0        0  CS  01/25/2010    4739307 1005721398           10:01:22
    100  0001020069            60        0                                                        
    VN1 121B159                 0        0  CS  01/25/2010    4739308 1005721399           10:01:24
    100  0001020069            60        0                                                        
    VN1 122B159                 0        0  CS  01/25/2010    4739309 1005721400           10:01:26
    100  0001020069            60        0                                                        
    VN1 123B159                 0        0  CS  01/25/2010    4739310 1005721401           10:01:29
    100  0001020069            60        0                                                        
    VN1 124B160                 0        0  CS  01/25/2010    4739311 1005721402           10:01:31
    100  0001020069            60        0                                                        
    Thnks you,
    Anmol.
    Edited by: anmol112 on Jan 25, 2010 10:34 PM

    no replay, clossing threat.

  • Problems with Print Program of Production Order (CO03) !!

    Hi all,
      I have a question about Print program of Production Order. I created a new Order in CO01. Then, in CO03, I call Print Program ( menu <b>Functions >> Print</b>). At the first time, it printed a so-called original version. Later, when i printed it again, it informed me that just was a copy. Now, that's ok.
    I made some modification of Print Program by copying and changing the code (let's call it Z_PSFCOBJL) and SAPScript form. However, When I call Print function in CO03 for that Order, it didn't show any changes which I made. What's wrong? I checked in the code by debug mode, the variable that I transfered to the form was correct with its value.
    <b>I think that because SAP just make a print copy so that it will not reflect any changes that I made to the program, right? Is there any way to overcome this because I don't want to create new Orders just for testing every modification</b>?
    Thank you in advance.

    Hi MURUGESAN THANGATHURAI  ,
        Yes, I did assign the new program and new form for this before printing. But I wanna know if there is any way that allows me to view those changes I made?
    When I change the code in Print Program, print-out includes this update (although it still informs me that is a copy version). But when I make changes in the SAPScript form (for example, adding a variable for display), <b>it will not update this</b>?
    What's problem?
    Thank you guys.

  • Problem with final issue of production order components

    Hi Gurus,
    Currently we have a problem with the production order components.
    The problem is that, we needed some components (components which are categorized as dangerous goods) deleted from the production orders.
    So we tried to manually tick the final issue indicator and save the production order. However, the reservations reappeared after the MRP Run.
    Hence, we then tried to delete the component line items, but then again the reservations reappeared.
    Also, since the components are externally procured materials, new purchase requisitions are generated by MRP for these materials.
    Kindly request your help on the same.
    Thanks and Regards,
    Sanju

    Hi Kiran,
    Please find the screenshots of MD04 for the header and component in the attachment:
    MD04 for Header:
    MD04 for Component:
    For the header material no entry is available for 07.01.2015 as the status is delivered for the production order of the header material.
    Kindly help me with the same.
    Thanks,
    Sanju

  • Problem in changing Production order components.

    The problem is happening while changing components in Production order.
    Take a look at the source code.
    data :      IS_ORDER_KEY  TYPE  COXT_ORD_KEY,
    IS_ORDER_COMPONENT_KEY  TYPE  COXT_S_ORD_COMP_KEY,
    IS_REQUIREMENT_QUANTITY TYPE  COXT_S_QUANTITY,
    IS_REQUIREMENT_QUANTITYX  TYPE  COXT_S_QUANTITYX,
    IS_CONFIRMED_QUANTITY TYPE  COXT_S_QUANTITY,
    IS_CONFIRMED_QUANTITYX  TYPE  COXT_S_QUANTITYX,
    I_MATERIAL  TYPE  COXT_MATERIAL,
    I_MATERIALX TYPE  COXT_MATERIALX,
    IS_ORDER_OPERATION_KEY  TYPE  COXT_S_ORD_OPR_KEY,
    IS_ORDER_OPERATION_KEYX TYPE  COXT_S_ORD_OPR_KEYX,
    IS_REQUIREMENT_DATE TYPE  COXT_S_DATE,
    IS_REQUIREMENT_DATEX  TYPE  COXT_S_DATEX,
    IS_STORAGE_LOCATION TYPE  COXT_S_STORAGE_LOCATION,
    IS_STORAGE_LOCATIONX  TYPE  COXT_S_STORAGE_LOCATIONX,
    I_BATCH TYPE  COXT_BATCH,
    I_BATCHX  TYPE  COXT_BATCHX,
    I_MI_CONFIGURATION_OBJECT TYPE  COXT_CONFIG_OBJECT,
    I_MI_CONFIGURATION_OBJECTX  TYPE  COXT_CONFIG_OBJECTX.
    DATA  :wa_resb type resb,
           ES_BAPIRETURN TYPE  COXT_BAPIRETURN,
    E_ERROR_OCCURRED  TYPE  C.
    IS_ORDER_KEY = '000002098003'.
    select single * from resb into wa_resb where aufnr eq IS_ORDER_KEY
       and bwart eq '531'.
    move-corresponding wa_resb to IS_ORDER_COMPONENT_KEY.
    IS_REQUIREMENT_QUANTITY-quantity = '10.23'.
    IS_REQUIREMENT_QUANTITY-uom = 'KG'.
    IS_REQUIREMENT_QUANTITYX-quantity = 'X'.
    IS_REQUIREMENT_QUANTITYx-uom = 'X'.
    *IS_STORAGE_LOCATION-lgort = '1060'.
    *IS_STORAGE_LOCATIONX-lgort = 'X'.
    I_MATERIAL = wa_resb-matnr.
    IS_STORAGE_LOCATION-werks = wa_resb-werks.
    IS_STORAGE_LOCATIONx-werks = 'X'.
    IS_STORAGE_LOCATION-lgort = '1060'.
    IS_STORAGE_LOCATIONX-lgort = 'X'.
    CALL FUNCTION 'CO_XT_COMPONENT_CHANGE'
       EXPORTING
         IS_ORDER_KEY                     = IS_ORDER_KEY
         IS_ORDER_COMPONENT_KEY           = IS_ORDER_COMPONENT_KEY
         IS_REQUIREMENT_QUANTITY          = IS_REQUIREMENT_QUANTITY
         IS_REQUIREMENT_QUANTITYX         = IS_REQUIREMENT_QUANTITYX
         IS_CONFIRMED_QUANTITY            = IS_CONFIRMED_QUANTITY
         IS_CONFIRMED_QUANTITYX           = IS_CONFIRMED_QUANTITYX
         I_MATERIAL                       = I_MATERIAL
         I_MATERIALX                      = I_MATERIALX
    *   IS_ORDER_OPERATION_KEY           = IS_ORDER_OPERATION_KEY
    *   IS_ORDER_OPERATION_KEYX          = IS_ORDER_OPERATION_KEYX
    *   IS_REQUIREMENT_DATE              = IS_REQUIREMENT_DATE
    *   IS_REQUIREMENT_DATEX             = IS_REQUIREMENT_DATEX
         IS_STORAGE_LOCATION              = IS_STORAGE_LOCATION
         IS_STORAGE_LOCATIONX             = IS_STORAGE_LOCATIONX
         I_BATCH                          = I_BATCH
         I_BATCHX                         = I_BATCHX
         I_MI_CONFIGURATION_OBJECT        = I_MI_CONFIGURATION_OBJECT
         I_MI_CONFIGURATION_OBJECTX       = I_MI_CONFIGURATION_OBJECTX
    *   I_BATCH_SEL_CUOBJ                = I_BATCH_SEL_CUOBJ
    *   I_BATCH_SEL_CUOBJX               = I_BATCH_SEL_CUOBJX
    *   I_XFEHL                          = I_XFEHL
    *   I_XFEHLX                         = I_XFEHLX
    *   I_SOBKZ                          = I_SOBKZ
    *   I_SOBKZX                         = I_SOBKZX
    *   I_KDAUF                          = I_KDAUF
    *   I_KDAUFX                         = I_KDAUFX
    *   I_KDPOS                          = I_KDPOS
    *   I_KDPOSX                         = I_KDPOSX
    *   I_PSPEL                          = I_PSPEL
    *   I_PSPELX                         = I_PSPELX
    *   I_KZAUS                          = I_KZAUS
    *   I_KZAUSX                         = I_KZAUSX
    *   I_NAFKZ                          = I_NAFKZ
    *   I_NAFKZX                         = I_NAFKZX
    *   I_NOMAT                          = I_NOMAT
    *   I_NOMATX                         = I_NOMATX
    *   I_NFUML                          = I_NFUML
    *   I_NFUMLX                         = I_NFUMLX
    *   I_NFPKZ                          = I_NFPKZ
    *   I_NFPKZX                         = I_NFPKZX
    *   I_NOMNG                          = I_NOMNG
    *   I_NOMNGX                         = I_NOMNGX
      IMPORTING
        ES_BAPIRETURN                    = ES_BAPIRETURN "initial
        E_ERROR_OCCURRED                 = E_ERROR_OCCURRED"blank not showing 'X'.
    CALL FUNCTION 'CO_XT_ORDER_PREPARE_COMMIT'
      IMPORTING
        E_ORDER_KEY            = IS_ORDER_KEY
        ES_BAPIRETURN          = ES_BAPIRETURN
        E_ERROR_OCCURRED       = E_ERROR_OCCURRED
    * TABLES
    *   ET_ORD_KEY_MAP         = ET_ORD_KEY_MAP
    *   ET_BAPIRETURN          = ET_BAPIRETURN
    write : 'dfdfdf'
    Notable point is that after executing CO_XT_COMPONENT_CHANGE' parameters ES_BAPIRETURN and E_ERROR_OCCURRED are initial.
    This explains that the FM has been executed successfully.
    But still the changes are not done in production order.
    Please let me know where i am mistaken.

    nabheet,
    this is called expilicitly for commit.
    Not in any exit or something.
    Have a look at the source code which i have posted while starting this discussion.
    This below FM is called just after CALL FUNCTION 'CO_XT_COMPONENT_CHANGE'
    Look at the source code in starting of discussion. U will understand when it is executed.
    CALL FUNCTION 'CO_XT_ORDER_PREPARE_COMMIT'
      IMPORTING
        E_ORDER_KEY            = IS_ORDER_KEY
        ES_BAPIRETURN          = ES_BAPIRETURN
        E_ERROR_OCCURRED       = E_ERROR_OCCURRED
    * TABLES
    *   ET_ORD_KEY_MAP         = ET_ORD_KEY_MAP
    *   ET_BAPIRETURN          = ET_BAPIRETURN

  • Problem with serialnuber/production order

    Hello,
    When I try to add some products with serial number from production order i get an error message: "The warehouse code already exist in SRI1. "
    In SRI1 WHcode is not an unique field so I think this is strange!
    This worked on this item before I have other similar items that works ok.
    We have 2005 SP1 PL.23.
    Any ideas or helpful tips is preciated!
    BR
    Dag-Ivar

    We had a very similar problem over here, in a customer database. Our problem was related with a serial number release.The problema was solved by SAP Support Team, in a Webex session.
    I suggest to create a message regarding this issue. Probably SAP will ask you to upload this database in a container.

  • Problem in updating Production Order

    Dear All,
          When I try to update the Production Order I am getting the error message as  "Invalid user OWOR.UserSign ".
    Help me to resolve this problem.
    Thanks,
    Lingam.
    Edited by: miplkutalingam on Feb 13, 2012 3:22 PM

    Dear Lingam,
    Welcome you post on the forum.
    Something must be wrong in the document. The user who created the PO may be deleted somehow. B1 does not allow the deleting of the user but manual deletion may be occurred in your database.
    Try: SELECT UserSign FROM OWOR T0 WHERE T0.DocNum = '[%0\]' to find out.
    Thanks,
    Gordon

  • Problem in overhead calculation of production order after TECO

    Dear All,
    Just for reconfirmation can you tell me what is the actual sequence of steps used in Closing of Production order i.e
    First we have to do TECO of an order and then we have to calculate Overhead.(KGI2).
    I am asking this question because i have observed that  order which are get TECO before Overhead calculation, if you see the cost analysis, system will not update overhead value in order and the difference get posted in Variances after settlement.
    If we have to do vice versa then there will be the problem as user do the TECO of an order as an when production order completed, overhead calculation is the work of costing department and they will do it at month end only hence system will always post variance for the overhead value.
    Kindly suggest. 
    Regards,
    Shayam

    Hi,
    Normally, you need to check the transactions allowed when the status TECO is set. However, status is set only when the sequence of the steps are completed during month end. Transactions like the WIP, variances, settlement etc as you may have bach jobs running to set the status.
    Kind Regards
    Umapathi G

  • Production Orders: Scheduling Problem

    Hello
    I have a scheduling problem.  I want the system to calculate the production order dates.
    I have maintained the following
    1.      Work Center:  A formula to calculate the duration.  I have marked the u201Crelevant to finite indicatoru201D in the Capacity Header Tab.  I have also maintained the available capacity as 24 Hrs.
    2.     Routing:  I have maintained the values for the standard value keys
    3.     SPRO:  In scheduling parameters for the order type, I have marked u201CGenerate cap requirementsu201D and u201CSchedulingu201D;  In the production scheduling profile, I have marked u201CSchedule orderu201D (on release) & u201CFinite Schedulingu201D (Availability check).
    But the production order is not getting scheduled & the start & end times are the same.  I get the error u201CNo req/capacity exists or not relevant for finite schedulingu201D.
    Can anyone guide me as to what I am missing?
    Best regards
    Tom

    Dear Tom,
    Please check following;
    1. Your operation contol key; whether it allows scheduling.
    2. scheduling parameters for production order on OPU3: Please select proper combination of plant and order type and tick scheduling and generate capacity requts indicators in detailed scheduling tab.
    Please revert back if problem persist.
    Best Regards
    Uday

  • Capacity problem in production order

    Hi Friends
    I am facing a serious problem in capacity evaluation. After MRP run with scedulling as 2. After this I am able to see the capacity in respective work centers for the planned orders. But when converted to production order I am not able to see. When I checked the order it is showing as "Order 60003310 has no requirements in the eval.period, so there is no display".
    I dont have any clue as whats happening since the capacity is there till it is a planned order. Any suggestion?
    Thanks & regds

    Hi,
    Your problem is with Evaluation period as system not displaying the capacity so first check whther is nay capacity requirement is there in this period you can check with CM01 also.
    In OPD2.
    Assuming you want to create a time profile for 2 months.
                                            Entry Type    Start Date     End Date
    Database Read Period            J                -3                   3
    The database read period specifies the period in which capacity requirements are read  from the database. All requirements are accessed which are partially or completely 
    within the database read period.
    Evaluation Period          G              -1           60
    The evaluation period specifies the period over which data is formatted and displayed. 
    The evaluation period must lie within the database read period.
    Planning Period            G              -1           60
    The planning period defines the period in which the SAP system can carry out planning. 
    The planning period is smaller than or equal to the evaluation period. You cannot move  operations outside the planning period. Equally, when automatic finite scheduling is 
    carried out for an operation the system only searches for a new date .
    Please check and come back.
    Regards,
    R.Brahmankar

Maybe you are looking for

  • Message is not getting displayed.

    Hi all, I have a form with KEY_COMMIT Trigger with the code below: DECLARE cls_date  DATE; Duration  NUMBER; int_rate  NUMBER(3,2); PA_AMT    NUMBER(10,2); TRMS      NUMBER; I_RATE    NUMBER(4,2); pl_id ParamList; usernm VARCHAR2(20); OLD_FDR_NO NUMB

  • How to get custom defined messages in WAD

    Hi can you please help me how to get customized error messages in WAD. While I'm executing in RSRT the customer exit variable throws error message saying that 'No Sales orders exist for this Sold_To Party' but when I execute same query using Bex WAD,

  • Listing folder contents as alias list

    the list folder command returns a list of filenames, however I need something that returns a list of full fledged file references. This: [set foldercontents to contens of (choose folder)] works by returning a list of document files with full paths. I

  • Msi Kt333 woes with barton 2500

    Hi, I just got this new processor, the barton 2500 and my computer is very instable. I have a Kt333 ultra 2 with bios 5.7 and it worked fine with an athlon xp1800+ I set up fsb 166 and everything else in auto and It will crash at random in winxp. The

  • Problem with Ipad2 upgrade connection timed out

    I'm trying to upgrade my ipad2 to ios5. After finishing download, it always said there is a problem due to connection timed out. Could someone help pls?