Production Order Qty- Inspection Lot Qty

Hi Guru's,
When an  production order is relreased an inspection lot is creaetd with the production Qty. But later when we change Qty for  the released Prodction Order the inspection lot  Qty is not changes it remains the same as previous Order Qty.
Say for Ex: intial Prod  order qty (MTS Scenario) is 200 (production order released). Inspection lot Qty is 200.
Later  User changes the Qty to  100. Our problem is the inspection lot qty  does not change ramins the same as 200. Can inspection lot qty be changed automically on change of production order qty .
What settings need to change? pls advise
Regards,
Sankaran
Edited by: Sankaran M on Oct 10, 2008 9:41 AM

Hi Sankaran,
It is possible if the user not doing any result against existing lot.
Follow the Below step.
Your Existing order Qty = 200 Nos Inspection lot no 300000200.
Now you want change the Qty as 200 to 100.
Before change the qty, first you have to delete the Inspection lot Go to CO02 -> Got to menu Functions -> Inspection lot -> Delete.
Now change the Qty 100.
And Again go to Functions -> Inspection Lot -> Create. and save the order.
Now system will delete the Old indpection lot and create the new inspection lot.
Qty : 100 Inspection Lot 300000201.
Revert further clarification.
Regards,
S.Babusingh

Similar Messages

  • Difference in actual qty & inspection lot qty

    Dear gurus
    i am in a situation.in the sales order the oty is 3000kg and the delivery made is alos 3000 kg . but when i checked the inspection lot (qa03) in the tab inspection lot qty the actual qty is 3000kg but the inspection lot qty and sample size is showing 2382 kg.what might be the reason.
    sam

    Hi Sam,
    3.There is one tab "correct actual Qty" in QA02.Have you made any chnages hee.
    have you checked it,
    Once you change this quantity and save, the lot quantity will also set accordingly.
    To track the changes for the same for inspection lot, press Cntr + F12 in either QA03 or QA02
    Regards,
    Shyamal

  • In process Inspection  Lot Qty and Actual Lot quantity difference.

    Hi Experts,
    In case of  In process Inspection
    Scenario : 1. Production Order created, released but before saving the qty is changed.
                    2. Production Order created released and saved. Then qty is changed in Change Prod order txn.
    These scenarios are causing a discrepancy in  Inspection  Lot Qty and Actual Lot quantity. Is there any method to avoid this ?
    This can be made correct in  Inspection lot by resetting the sample calculation. But once confirmation has started for Prodn Order (not necessarily QC operation) or  RR has been done  resetting is not possible.
    Is this the std behavior ? Disallowing the resetting once RR done seems OK, but even if any of the operation in Prodn Order is confirmed it still give status error while resetting. Canceling all the confirmation all the way back  also does not solve the problem.
    Any suggestions ?
    Regards
    Joe

    Hi
    Although your suggestion is valid, it is not practical from user point of view.
    Moving this thread to QM forum.
    Rgds

  • Inspection Lot Qty Vs Actual Lot Qty

    Hi All;
    I am posting multiple GR's against a Process Order for Eg 1st GR 100 Qty, 2nd GR 200, 3rd GR 300 and after doing this in the Inspection Lot the Inspection Lot Qty shows as 100 and the Actual lot Qty of 600 (sum of GR's) hence the Inspection lot Qty is always less then the actual lot Qty.... is this standard,I was thinking the Inspection Lot Qty gets updated with the Actual Lot Qty and they should match.
    Thanks & Regards

    What is the process order quantity when Inspection lot was created? It should be 100.Usually the process order qty will be shown as the inspection lot qty and the GR qty will be shown as the actual lot qty. That's the reason the actual lot qty is equal to your GR qty. Most of the times, these two quantities are same.
    As said in the earlier response, for incoming goods the GR qty will be shown as the inspection lot qty and during inspection if you find the received qty is higher or lesser than the GR qty, using QAC1 the actual lot qty is corrected. So, always the actual lot qty is the qty received.
    Hope it helps.
    Thanks,
    Ram

  • QM Inspection Lot Qty vs Actual Lot Qty

    Gang,
    What is the difference between Inspection Lot Qty vs Actual Lot Qty. And which one of these should get updated when more than one receipt is against the same Material/Batch/SLoc?
    Thanks
    Bruce

    Inspection lot Qty & actual lot qty as I remind are most of the time same but when you do the QTy correction through QAC1 ,they come into picture...or may be when you have inspection control defined in the QM view
    Inspection lot qty has significance for inspection & calculation of sample size.
    When more than one receipt is against the same Material/Batch/SLoc the inspection lot QTy will be Qty for which he material document is created,

  • Inspection lot qty printout

    Dear all,
    I have a requirement of a tag printing in which inspection lot details are being printed.
    The Tag being printed every time of partial UD, here the problem in printing of the tag observed.
    The tag contains the inspection lot cleared qty, but if lot qty is say 500  and user did partial ud of 100 qty  first time 200 qty second time and 100 qty third time, I could not able to get the partial UD qty in QALS.
    I need to print the tag as per the partial UD.
    EX LOT qty 500 and i did partial ud say 100  so in QALS i dont get the qty for which i did partial UD.
    system will add the value of the Partial ud as per the partial UD.
    how to resolve the above problem, or i need to enter the partail UD in Z table. and pick the value as per the entry?
    Kindly suggest.
    Regards,
    Anil

    Hi Venugopal,
    Thanks My problem is resolved..
    The way u suggest is absolutely correct. unfortunately i could not explore it...
    Thanks, I have assigned full Points to ur reply.
    one more query
    Is it possible to print the tag directly using any enhancement / functional module after saving the UD Posting.?
    If u have any idea, kindly revert.
    Thanks
    Anil

  • "Closing" Unused, but Released Orders with Inspection Lots

    We have Process Orders which have been released, but been unused.  When We come to Financially Close them we have problems as the Inspection lot is still on without a UD
    Is there a way we can mass process UD of Inspection Lots (or deletion of IL) with Nothing Produced on the Order?
    Thanks & Regards,
    Vivek Kumar

    hi,
    if you the process orders, make a list of those. now in qa16, you can do the mass UD.  in that transaction, you can find out an option called " dynamic selection". if you expand that option, you will have an option called " production"; under that order. So you can put all those process orders and with the lot oringin 03, you will ge tp know the concerned inspection lots. then you do mass ud. this was your requirement.
    Partha

  • Automatic WM transfer order during inspection lot posting to non-WM-sloc

    Hi All,
    I have a question in regards of automatic creation of WM-transfer orders during QM-inspection lot posting from a WM-storage location to a non-WM-storage location:
    - MIGO IM-posting: goods receipt with reference to purchase order to a WM-storage location
    => inspection lot automatically created
    => WM-stock is located on 902 GR area external rcpts / stock category Q
    - Inspection lot: enter result and usage decision with posting of inspection lot stock to a non-WM storage location into the blocked stock
    A transfer requirement (movement type 311 / destination u201C921 Transferu201D) is created after the inspection lot posting (QA11) but the auto-creation functionality is not possible since the u201CSystem cannot find source storage binu201D.
    How can this auto-creation of a transfer order be realized since it is possible to create the transfer order manually via LB11 (entering source u201C902u201D / storage bin u201CPurchase Order no.u201D)?
    The system cannot find the storage bin automatically.
    Thank you in advance!

    Hello,
    I do not understand your scenario , u are saying are posting inspection lot to non WM storage location and again saying system can not find bin automatically.
    "A transfer requirement (movement type 311 / destination u201C921 Transferu201D) is created after the inspection lot posting (QA11) but the auto-creation functionality is not possible since the u201CSystem cannot find source storage binu201D.
    How can this auto-creation of a transfer order be realized since it is possible to create the transfer order manually via LB11 (entering source u201C902u201D / storage bin u201CPurchase Order no.u201D)?
    The system cannot find the storage bin automatically.
    Thank you in advance!"
    Please let me know are u using quality interim storage area. If you clear material from quality and want material to go to bin then it should be warehouse managed storage location. 
    Regards,
    Prashant

  • Sales order and Inspection Lot relation

    Hi All,
    How can we find relation between Inspection lot and its coresponding sales order?
    Thanks and Regards
    Nazmul

    Hi Nazmul,
    you can find the can we find relation between Inspection lot and its corresponding sales order with the help of QA32 Inspection lot list
    Give inputs like : material / Plant / inspection lot origin and all where we can find out inspection lot number
    i hope it will helpful for you
    Thanks

  • UD for production order quality inspection

    hi,
      i have activated inspection 04 for a material and after GR it has been inspected and found ok. at the UD stage we are keeping the stock directly as unristricted stock and it is figuring in the inventory.but still phisically the material is not moved to the stores.  so the system shows excess inventory though it is not recieved phisically.
      I heard that there is some way where in which during UD or after UD we can control the mateiral to be placed in stores by the stores person directly .
    Is there any special transaction to keep the stock in to unristriced after inspection  but not in the UD stage.
    please suggest
    regards
    madan

    I'm a bit confused.  But if I interpret what you said...
    Material is GR and a stock relevant quality inspection lot is created.  It sounds though as if you have the indicator "post to QI" off in the material master inspection type setup so that the material is going right to unrestricted inventory and not QI.  In this manner it appears to the stores people that they have the material on hand, when in fact, it is still being inspected.  You want the stores people to be able to put-away this material so they know it is physically in the stores area.
    The simplest thing that I can suggest is to turn on the "post to QI" stock so that when stores looks at inventory, they'll see the material is in the quality inspection.  If you want, have the quality people make the UD without posting the stock.  Then have the stores people do the stock posting in the UD screen when they receive the material.   You can use the user status to prevent stock postings until a UD is done and you can also use the user statuses to prevent the stores people from making the actual UD.  They can only do the stock posting.
    This should give you the visibility you want while still allowing the QC people to make the decision on the UD.  And allow the stores people to post the material.
    Craig

  • Inspection lot with Production Order

    Hi friends,
    I am PP consultant and need some help in setting up a scanario of Production order with inspection lot.
    I need to setup a scenario where a inpspection lot is created from production order manually (not at the time of release). The purpose is to post few quantity of production order to scrap storage location. Inspection lot needs to be created only in certain production orders where some of the quantity has to be declared as scrap and that needs to be rejected with usage decision.
    can any one please suggest the overview of such scenario.
    Regards,
    Rohit

    Dear Rohit,
    You want to create a manual inspection lot only for the purpose of Scrapping and also want it to be done with Usage Decision.
    You can not use inspection type 89, as it is not stock relevant (Inspection type for Miscellaneous inspection),
    There is one another solution with inspection type 08( inspection for Material Movement), but it might look Lengthy.
    1. Release a Production order. say 100 qty.
    2. If during process, 10 is scrap, then perform Partial Confirmation of 10 Qty.;  Stock will be in Unrestricted.
    3. Now, through MB1B, transfer 10 qty from Unrestricted to QI.
    4. As you have inspection type 08 active, System will create an Inspection lot for 10 Qty.
    5. You can post this whole 10 qty to Scrap while giving Usage Decision.
    I think, in your process, Scrapping is not done frequently, that is why you do not want inspection lot at every production order.
    in that case this solution may solve your problem.
    regards,
    Amol
    Edited by: Amolbook on Jan 12, 2012 3:13 PM

  • For a Production order - Operation wise Inspection Lot

    Hi Experts,
    Please help me out to resolve the following problems.
    1. How can we create inspection lot for each operation for a production order?
    If a production order has 10 operations, I will have to have 10 inspection lots for that order.
    2. I have a final assembly called A with components B & C. Some other material called D has similar characteristics of B.
        But sometimes, for A, instead of B (if stock is not available), i want to use D also. Please note that, if B is not available, then
        only, I will use D. Otherwise always B only, so we cannot go with probability.
    How can we map this scenario? and MRP run also should consider D if B is not there.
    Thanks in advance.
    Regards,
    Vijay.

    Dear
    Answer Q1 : Go to SPRO > Production> Shop floor control> operations > confirmation> define confirmation parameters
    Maintain
    1)Operation sequence u2013 error when operation sequence is not adhered to
    2) Over delivery u2013 Error when over delivery tolerance is exceeded
    3) Results Rec. (QM)- Error message if no Insp results exist
    So what these setting helps is that  :
    1)All operation has to be confirmed operation wise means 0010 has to be confirmed for confirming 0020 operation. SO production guys can only confirm 0040 operations only after 0030 operations is confirmed by quality personal.
    2)Over delivery is not allowed means of in 0030 operation if only 50 quantity is confirmed in 0040 operation only 50 can be confirmed. Production people cannot confirm more than 50 quantities
    3) Also PP personal cannot confirm operation 0030 through C011N till the result recording of that operation is done through QA32.
    4)Maintain Operation Control Key -PP01 with marked Inspection Character Marked -OPJ8  and maintain this Control Key for   those operation which are required for Inspection Lot .
    Now For QM stand point , activate inspection type 03 and 04 in material master. For 03 type of inspection, you have to make routing in CA01. So when you release your production order, an inspection lot will be generated. This lot will not be stock relevant. This is just to check that you production is in accordance with quality norms. Only after clearing this lot from quality you can do your order confirmation, otherwise system will give hard error due to 3rd point of prev post.
    For 04 type of inspections, prepare inspection plan in QP01. Now when order is confirmed, an inspection lot of 04 origin will be created in quality, and this is stock relevant and for final inspection of production order material.
    If you need you can set for early inspection as well. That will give you another intermediate stage before final inspection. Inspection points are also an option if suites your requirement.
    If you need more inspections, I suggest go for manual inspection lots of 04 origins, they are created in ref to order and are not stock relevant.
    Q2 : Please explore this thread for options explained for Alternative Item selection .
    Alternate Item in BOM
    Regards
    JH

  • Inspection lot number not recorded in production order

    Experts,
    when I release a production order, the inspection lot is created correctly (type 04 - early lot creation) but the inspection lot number is not recorded in the production order. Why not?
    Rgds

    Dear,
    Only 03 type will be recorded in header, not 04. It is normal

  • Confirmation of a production order

    Hello,
    I have a question regarding the confirmation of a production order.
    Is it possible to confirm part of a production order into a temporary special stock in 4.6b? The reason is that we have to perform inspection before posting it into final unrestricted stock. The confirmation into the 'temporary' stock should not book any values of the stock. The value should be booked after the inspection.
    Looking forward to your feedback!!

    Hi,
    If you have QM module implemented, maintain inspection type 04 in material master & upon posting GR for the production order an inspection lot will be created. You can then do a results recording & a usage decision on the inspection lot. If it passes the QC it will be posted to unrestricted stock.
    If you do not have QM module then alternatively create a SLoc which is not included for MRP & specify this SLoc in your order header & when you do GR it will be posted to this SLoc. You can then a SLoc to SLoc transfer. Or if you dont want to create a SLoc, check in MIGO while posting GR for this order if you can specify that it is to be treated as a QC stock.
    Regards,
    Vivek

  • Actual lot Qty and inspection stock

    Hi,
    We are using early inspection for 04 inspection lot. When I release my process order the inspection lot is created. As usual, the first inspection doesn't have Actual lot qty and Insp. stock is checked. Now, when I create new inspection lot for same process order, the inspection lot has Actual lot qty and Insp. stock is unchecked.
    In material master Post to insp. stock is checked.
    Thanks for your help in advance.
    Bhavesh Patel

    Dear
    U need to go for Order Change Management For doing This As u said ur Changing the Qty and it should reflect in the inspection lot
    Please Follow this Link :
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0002c1c-f07c-2c10-3c93-b053715529b4?QuickLink=index&overridelayout=true]
    With Regards
    Pushpalas

Maybe you are looking for