Production order released (CO02)

Hello Guru,
We have question in our mide if we can block for modification of other user the PRODUCTION DATE of the batch created for the order when we do the RELEASED for the order? how could we block this PRODUCTION DATE? please help us.
Thanks a lot

Hi Ryan,
I am talking about,
upon saving it the change batch view will appear were the PRODUCTION DATE and SHELF LIFE
EXPIRATION DATE was populated automatically by SAP
Only and not about new Batch Creation.
Dear up to my knowledge in std. SAP system will ask you to maintain Production or Expiration Date at the time of Goods Receipt (see Shelf life expiration check in T.code OMJ5).
Regards,
Dhaval

Similar Messages

  • Print out of production order from co02

    Hi All,
      How do I take a print out of production order from co02. If I go to co02- Functions-Print- I get an error that after the next update the order will be printed. Since the production order is already in the released state how do I take the print.

    Priya,
    What system is prompting is that once you use the print function in the change mode of the order, system prints the papers to Spool or Printer once it is saved, that is the reason it is giving you a message.
    Please save the order after using the Print function in the change mode of the order, I am sure that you would get the print output either directly to the printer configured or to spool. If it was configured for spooling, use the transaction SP01/SP02 to print the spool request.
    Regards,
    Prasobh

  • Preview and print a printout in production order release

    Iu2019m using CO02 to release and save the production order. Currently u201Cbatch cardu201D printout is automatically printed in production order release. I want to change this to preview the printout before printout is send to the printer. Can someone tell me the configuration for this.

    Hi
    Pls refer this link
    layout adjustement in production order- suitable to printout sheet
    Print Preview of Production Order
    layout adjustement in production order- suitable to printout sheet
    Thanks
    S.Murali

  • Stanging indicator change in control cycle after production order released

    HI
    We have MM PP interface active
    i setup staging indicator 4 for one material via control cycle
    Production order is created and released
    now we would like to change staging indicator to 1 [pick parts]
    how we reread control cycles data in production order
    Thanks

    Try: CO02 > Functions > Read PP master data

  • Unique serial number during production order release for FG materials

    Hi,
    Actually our client is asking for serial number generation for each FG material during its production order release.
    So that with this serial number he can track it in shop floor plus after dispatching to customer.
    Here the scenario is Make To Order, this serial number will also be considered by SD during dispatch.
    For serial number creation, I referred documents from SAP best practices(help.sap.com).
    After this, now I am able to create serial number for specific material automatically.
    Currently I am getting serial number with respect to material specific, i.e., serial number generating with respect to FG codes. Ex:- FG1 - 1, 2, 3, 4 and FG2 - 1, 2, 3, 4.
    But as per my client requirement, they want serial number without material specific, i.e., common serial number for all FG codes.
    Ex:- Sr No- 1-FG1, 2-FG1, 3-FG2, 4-FG1 - - - - according to production order releasing sequence.
    Plz inform if any settings are to be made.
    Thank you in advance.

    Hi Arman,
    I Had got solution for how to track which FG is linked to which SFG sr no, just go through the below link it also gives how to use COIB transaction.
    COIB transaction usage, how to track which FG is linked to which SFG sr no
    But still I had not got solution for
    how to assign common serial number for all FG codes automatically
    Ex:- Sr No- 1 -> FG1,
    2 -> FG1,
    3 -> FG2,
    4 -> FG1
    - - - - according to production order releasing sequence.
    Whether is it automatic serial number assignment is possible or not.
    Plz inform if any settings are to be made.
    Thank you in advance.

  • Serial number during production order release

    Hi,
    Currently I am getting serial number with respect to material specific, i.e., serial number generating with respect to FG codes. Ex:-  FG1 - 1, 2, 3, 4 and FG2 - 1, 2, 3, 4.
    But as per my client requirement, they want serial number without material specific, i.e., common serial number for all FG codes.
    Ex:- Sr No- 1-FG1, 2-FG1, 3-FG2, 4-FG1    - - according to production order releasing sequence.
    Plz inform if any settings are to be made.
    Thanks,
    regards,
    B C Gudageri

    Thanks Glenn Larson,
    This is the first time for me for creating serial number for FG materials.
    Actually our client is asking for serial number generation for each FG material during its production order release.
    So that with this serial number he can track it in shop floor plus after dispatching to customer.
    Here the scenario is Make To Order. So this serial number will also be considered by SD during dispatch.
    For serial number creation, I referred documents from SAP best practices(help.sap.com).
    After this, now I am able to create serial number for specific material types automatically.
    But here the condition is client wants serial number should not be specific to material codes but should be common  throughout the plant for all FG codes.
    Ex:- Sr No- 1 for FG1,
                       2 for FG2,
                       3 for FG2,
                       4 for FG3
    - according to production order releasing sequence.
    Me dont know about Presort and IMB serial numbers.
    Please tell me the appropriate approach I can make or any of links which I can refer.
    Regards,
    B C Gudageri

  • Production order release

    Dear Experts
    Good Afternoon
    I have small query regarding production order release when ever i try to release a production order system give following message
    System status WCRE is active (ACT 20030197 0010) and system status of work center is CRTD WCRE
    I can't able to find the clue how to release the sale order
    Kindy guide me
    Valuable answer will be rewarded
    Regards
    Rajeev Garg

    Hi,
    Pls. check for your Work Center Status in CR02 / CR03 -
    > Extras -
    > Administrative Data -
    > Status.
    Check whether it is locked or not. If work center is locked , unlock your work center from
    Extras Menu--->Status--> Lock / Unlock.
    Hope this may help you.
    Regards,
    Tejas

  • MRP - production order release

    Hi experts,
    I am new in SAP PP
    currently when run the MRP, it will generate planned orders and PR's. it will calculated planned order sub compoents requirement qty also.
    but i want to change settings for once convert planned order to production order once release after only need to create sub compoent PR's and planned order
    pls explain what change need to do?
    Regards,
    Elango

    Hi
    This is not possible,because planning and production order releasing is two different activity.When ur release production order thats mean ur giving green signal for manufacturing or start manufacturing and when ur release the production order ur work center or capacity is get booked against that production order. So at the time of production order release if u want to plan the child item then u have to procure ur child item then u have start manufacturing so complete time ur capacity is showing as loaded then ur not able plan for other production order.

  • Error during Production Order release

    Hi Experts,
    When I am releasing one production order follwoing messege appearing.
    Error during availability check for order xxxxx (see log)
    co02>goto> logs--> release
    Date 22000504 lies after the end of the valid factory calendar (please correct).
    I have checked routing, pv, bom etc. availability check indicator 02 is alreadly maintained in mm03. Earlier we have confirmed several order of this material in the past, now suddenly this error is appearing.
    Kindly help me to solve this problem.
    Regards
    GR

    Hi,
    Chk for following :
    01. Timings in Routings/Factory calender
    02. Chk for all components in order . It may be possible that one of component is having some MRP elelment dated beyond factory calender
    03. Also chk all receipt /issue elements with dates .
    Regards,
    Milind.

  • Restrict Automatic serial number calculation for Production order release

    Hi,
    I need the solution for following requirement.
    Release production order(CO02) . Then go to Menu header-> Serial Numbers.
    Here I am getting serial numbers automatically as the material used in production order is set for automatic serial number calculation.
    But I want to restrict automatic serial number assignment based on production order type.
    If order type is 'XYZ', I dont want to calculate serial numbers automatically.
    Can anyone tell me how to do it?
    Regards,
    Manan Desai.

    When you press Release Order button the BADI 'WORKORDER_UPDATE->AT_RELEASE' will be called.
    At this point the internal tables for Serial numbers are filled by the program automatically.
    So call function module 'SERIAL_INTTAB_REFRESH' which will refresh the internal tables for serial numbers generated before teh serial number window pops up.
    Also at the BADI 'WORKORDER_UPDATE->AT_SAVE' call the same function module because before this BADI call when you press 'SAVE' the program again checks if automatic serial number is set for that material and if yes then check if no serial numbers are generated then it generates the serial numbers again and fills the internal tables. So clear the internal tables again based on the conditions.
    In these BADI's we have access of header information which can be used to check condition.
    I hope this will give you better idea.
    Thanks for your efforts.
    Manan Desai.

  • Production order released blocking the batch created

    Hello Guru,
    I have some question to ask, in production order, when we change the order via CO02, released it (production order create:classification) for batch will appear. after completing this the order "released carried out" will be the message. and when we save the order CHANGE BATCH view will display then, the production date and shelf life expiration date was automatically populated by SAP. my question is is there a possiblity that this CHANGE BATCH when will appear the production date and shelf life expiration date was unchangeble already SAP proposed date was fixed (gray-out) or instead change batch display batch will appear? is there any set-up to make this feasible?
    we want to block the production date/shelf life expiration date in modification once SAP has already computed and proposed this date for the batch on the FG material of the production order. Please help. I know this is a standard behavior, but can this be feasible?
    Any help or inputs.
    Thanks
    Edited by: Agent X44 on Mar 11, 2009 11:50 AM
    Edited by: Agent X44 on Mar 11, 2009 12:10 PM
    Edited by: Agent X44 on Mar 11, 2009 1:15 PM

    You must have to check batch Class and its characteristics. Something wrong here.
    Regards,
    RM

  • Exit at the Production order release

    Hi every one,
        Can you please help me in finding the user exit for either CO01 or CO02 when a Production Order is released.
    I.e, when a production order is changed or created and once it is released, i want the exit at that point. i want to trigger some code once the order is released.
    Thanks
    Rich

    Hi,
    ppco0007- Exit when saving production order
    ppco0012 - Prod order display/change order header data
    ppco0005 - Storage location/backflushing when order is created
    In transaction smod, in enhancement field type a name & then press f4. In the pop up screen enter the package as co,keep the exit name field as "blank" & press enter.All the relevant exits will be displayed.
    Regards,
    Senthilkumar

  • Run time error while saving the production order in CO02

    HI Experts,
    While i am releasing and saving the production order the system is giving the runtime error. Please help.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_SLD_API_EXCEPTION
    Error analysis is
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SLD_API_EXCEPTION', was not
    caught in
    procedure "GET_ACCESS_DATA" "(METHOD)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Internal error in method
    A Quick response is required.
    Regards
    Dinakar Sarma

    Hi,
    Please check below  link for your issue , it may useful
    http://forums.sdn.sap.com/thread.jspa?messageID=10815298#10815298
    Regards,
    Ram

  • User exit to populate profit center in production order change (CO02)

    Hello,
    The requirement is to populate the profit center in production order change (Tcode CO02). I know the user exit that can populate profitcenter in CO01 but it's not called in CO02. Ther other user exits that I found are for checking but not for changing
    Is there a user exit /BADI that can acheive this requirement?
    Thanks a lot for your advise.
    Joe

    Hi,
    Use the user exit PPCO0007 ,function module EXIT_SAPLCOZV_001
    HEADER_EXP-PRCTR
    Thanks,
    Shailaja Ainala.

  • Production order release with batch management

    Dear All
    Our company are going to use batch managment. But someone told us the production order cannot be released if the component with batch managment is missing (requirment is lower than stock). Is that true?

    Dear,
    It depend upon the setting means if you want to automatic batch determination in production order for component then system will not allow to release if no batches are available.
    This setting come from MRP 2 view batch entry if you keep it blank then system will allow you to release the order with missing batch quantity also.
    Please try and come back if any issue.
    Regards,
    R.Brahmankar

Maybe you are looking for

  • TiVo output to DVI?

    I'm curious, but not curious enough to fry my NVIDIA GeoForce 8800 GT without asking. If I hooked up a TiVo HD with a DVI to HDMI adapter, would I be able to view the output on my 30" ACD? Just wondering.

  • Dock size keeps changing?

    I always set dock size the smallest. But it keeps changing so that it's slightly bigger than the smallest. Why is it changing all by itself?

  • Unwanted Line in Rollover

    Hello I'm a Dreamweaver newbie and building our  first site. I'm having 2 problems, only with Internet Explorer.   - The first is making the background central in IE 7 or 8 (but I saw a recent thread that pretty much suggested it's impossible). - the

  • Acrobat X Pro Install

    Installed the Adobe Suite 5.5 Design Standard on Mac OS 10.6.7. I noticed it booted up fast....then noticed several menu options at the top... ie Document...Comments......Forms.....Tools.........Advanced etc. were all missing! I have reinstalled seve

  • HT4859 How long do your photos stay in your camera roll backup?

    How long do your photos stay in your camera roll backup?