Production order status report

I want a report regarding the Work center reporting mentioned below.
4 operations in the Routing for the material
Operation 10     1111(Work center)
Operation 20     2222(Work center)
Operation 30     3333(Work center)
Operation 40     4444(Work center)
4 Orders raised for the material
40001     Created
40002   Released
40003   Partially confirmed
40004     Partially confirmed
When I run a report for the 4th operation (4444) through COOIS, report is showing 4 orders. But 40001 and 40002 are not completed 30 operations. User wants to see the report which are awaiting for 4th operation which are completed 3rd operation.
I can only restrict with 2 system statuses only, how can I handle the situation?
Thanks in advance
Sudha.

I want to avoid CRTD, TECO,CNF statuses
exclude CRTD and CNF in Headaer status in COOIS
and exclude TECO in Operation status
and check the result

Similar Messages

  • Report on production order status and shortage report

    I want to know standard report on production order status and shortage report. Kindly suggest.

    COOIS - Production order information system . In this report you can give system status in selection screen  and in report you can get complete status details (both system and user status) .
    shortage report - CO24

  • Production order status for wm staging for production

    Hi Friends,
    What should be the status of production order for wm staging of raw for production.
    In production order status Confirmed & delivered will I be able to do staging for the production order.
    Thanks,
    Kiran

    Hi
    Material staging should be allowed following the Release of the Production Order.
    Then, as an example, you could have your first operation in the order (OP10) to Consume Materials. This will then backflush the materials in the PSA (Production Supply Area) that the staged materials were taken to. Ensure that the materials are set for Backflushing in the material master in MRP2.
    If the OP10 is confirmed before materials have been staged then they will not appear in the LP12 staging report.
    It's all about timing
    Regards
    Darren

  • Sale Order Status Report

    Dear Expert.
    I want Sales Order Status report as below mentioned format required quarry base report from Date to To Date.
    Location-OrderSeries-OrderNo-CardCode-CardName-ItemCode-Item Descripotion-Inv.UOM-Order Qty-Allocated Qty-DeliverQty-Peniding Qty adn Pending Order Value.

    Hi,
    You can check this :
    select t3.location as 'Location',t0.series as 'Order Series',
    t0.docnum as 'Order No.',t0.cardcode as 'Business Partner Code',
    t0.cardname as 'Business Partner Name', t1.itemcode as 'Item',
    t1.dscription as 'Item Name', t2.invntryUom as 'Inventory UoM',t1.quantity as 'Order Qty',
    t1.QtyToship as 'Allocated Qty- Qty to Ship', t1.delivrdQty as 'Delivered Qty',
    t1.OrderedQty as 'Ordered Qty', t1.openCreQty as 'Pending Qty',
    t1.Opensum as 'Pending Order Row Value'
    from ORDR t0 inner join RDR1 t1 on t1.docentry = t0.docentry
    inner join OITM t2 on t2.itemcode = t1.itemcode
    inner join OLCT t3 on t3.code = t1.loccode
    where t0.docdate >= '2011.01.01' and t0.docdate <= '2011.12.31'
    Hope it helps.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Sales Order Status Report

    Hi,
    Can you please guide me for Sales Order status report extractors?whether some standard extractors would be used or customized or standard is available which can further be enhanced.
    Scenario is- I have to populate report columns like
    0-25000     25001-50000     50001-100000     100001-200000     200001-500000     500000>
    And analysis has to be shown in the report rows : Sales District. In Columns only number of sales order in each district would be entered as a number. Example- of for district ZMJT there are 3 order are in pending stage having quantities 35000 then entry 3 will come in first column and so on. Following are other columns for drill down purpose.
    Input Fields:
    Date Range
    Company Code
    Currency Type
    Sales District
    Sales Group
    Analytical Fields-
    Sales Org.
    Distribution Ch.
    Division
    Sales Order No.
    Sales Order Dt.
    Sales District
    Tube Dia
    Tube Length
    Laminate Structure
    Application Category
    Customer
    Customer Group
    Sales office
    Sales region
    Sales Order Qty
    Sales order Value
    Regards,
    Ritika

    Hi,
      We have standard extractor 2LIS_11_VASTI (Sales Document Item Status) for getting the status.
    Regards,
    Vamsi Krishna

  • What is table field name for order status report  of rate per unit and  bal

    hi  i want to make FS for order status report i almost get all table and field but i don't get only two field  rate per unit and balance value  table field didn't get please help me searching in field and table
      i want to develop my status report

    Hi,
    Check tables VBAK and VBAP wherein you will get all header and item details.
    VBUK and VBUP for header and line item statuses.
    KONV would give you rates/pricing details for each condition type determines in the sales order.
    VBAK-KNUMV = KONV-KNUMV is how you relate both of them.
    Hope that helps.
    Regards,
    Amit

  • Material Order status report - Closed PO's

    Hi,
    In my "Material Order status report" I got closed PO's. I dont want any closed PO's to be displayed in my report. How to set this?
    Regards
    P.Ramprakash

    Hi,
    This is your own doveloped report or you are talking about any standared report.
    Regards,
    Manish

  • Production order wise report  of  all component.

    dear all
    I want production order wise report  of  all component.
    1) quantity required 2)issue quantity3)currect stock
    I got  quantity required and issue quantity field in co24 but i didnt get currect stock field(unrestricted stock) in that t-code
    Is any t-code is available ?
    rgds
    Surendra

    Hy Surendra,
    In any of the standard SAP reports you will not find the Goods Movements of Particular order along with available Component stock.
    Goods movements report of the Production / Process order is static report once the order is close.While Stock report is variable report and may be change Time to Time.
    I think if you wish such kind of report then you have to go for Z reorts.
    You can find all the Goods Movements of Order in COOISPI/COOIS/IW3M but there is not available stock report.
    Regards,
    Dhaval

  • Production order status was not changed to 'CNF' after final confirmation.

    Hi guru.
    I experienced very special case that production order status was not changed to CNF after final confirmation.
    I did final confirmation and canceled confirmation. (CNF -> REL)
    And I did final confirmation again because of fixing activity quantity.
    the strange thing is that production order status wasn't changed from REL to CNF.
    I did  confirmation again with 0 activity, thereby  I solved this problem
    BUT i don't know why this case happened.
    Please, explain the reason.
    Thanks.

    Hi,
    As per my observation, their is not any change in the status of the order REL with confirmation CNF, instead of this, it has change from CRTD & then to TECO.
       Sequence of the status of the order as below
    1) CRTD MANC NMAT SETC
    2) REL  NMAT SETC - Changes from CRTD to REL after releasing of the order
    3) REL  CNF  PRC  CSER ERTR OPGN SETC -  After confirmation, it updated after the order REL status.
    Rgd,
    Chetan

  • Table for production order status in ABAP

    In which table we get production order status like ( TECO , CRTD, etc......) ?
    Thanks..

    it should be JEST Table
    get the production order Object number from AUFK-OBJNR
    Goto JEST Table -> use value into jest table ,you get status.
    Thanks
    Seshu

  • Table : Production order status

    Hi all ,
    i need the Table in which the Production order status will appear .
    i tried AFKO and AFRU but not finding the same .
    Pl tell me the field name if possible .
    Regards

    Goto CAUFV
    get the field - CAUFV-OBJNR
         Pass this in JEST in field = OBJNR, object number and INACT = space
         you will get severail entries for field STAT.
         pass this field entries STAT to tabel TJ02T and field - ISTAT, language = EN
         you will get status in the field TJ02T-TXT04 and text in field - TJ02T-TXT30.
    or simply use FM- STATUS_TEXT_EDIT
    pl come back if required
    Edited by: Rajesha Vittal on Mar 27, 2008 10:17 AM

  • I Need Sales Order Status Reports using ALV

    Hi I Need Sales Order Status Reports using ALV.

    HI!
    For alv use REUSE_ALV_GRID_DSPLAY function module.
    For the given report fetch data from the tables:
    VBAK - sales order header
    VBAP - sales order details
    VBUK - sales order header status
    VBUP - sales order items status
    Regards
    Tamá

  • Production order eff report

    Dear experts,
    I want make a production order effciency report. for that the formula is
    efficiency = Actual exe.time / planned exe. time .
    We get planned exe. time from AFKO table.
    While calculating actual exec. time I have a problem.
    I have 3 operations
    10, 20, 30.
    Operation 10 starts at 7 am, 20 at 8 am and 30 at 9 am.
    From 9 am to 3 pm all three operations r under execution.
    At 4 pm operation 10 completes, at 5 pm oper. 20 completes, at 6 pm oper. 30 completes.
    Now I want to calculate the total exec time of an order, i.e. from 7 am to 6 pm but time betwen 9 am to 3 pm is to be considered only once as it overlapping time.
    How to map this?
    thanks
    sanket

    Hi Sanket,
    Just a quick thought:
    I guess your working on a Z report. You can calculate the efficiency of each operation i.e. actual vis a vis planned & then cummulate the % across to get overall efficiency.
    Hope the above helps.
    Regards,
    Vivek

  • Production order efficiency report

    Dear experts,
    I want make a production order effciency report. for that the formula is
    efficiency = Actual exe.time / planned exe. time .
    We get planned exe. time from AFKO table.
    While calculating actual exec. time I have a problem.
    I have 3 operations
    10, 20, 30.
    Operation 10 starts at 7 am, 20 at 8 am and 30 at 9 am.
    From 9 am to  3 pm all three operations r under execution.
    At 4 pm operation 10 completes, at 5 pm oper. 20 completes, at 6 pm oper. 30 completes.
    Now I want to calculate the total exec time of an order, i.e. from 7 am to 6 pm but time betwen 9 am to 3 pm is to be considered only once as it overlapping time.
    How to map this?
    thanks
    sanket

    Hi Sanket,
    Just a quick thought:
    I guess your working on a Z report. You can calculate the efficiency of each operation i.e. actual vis a vis planned & then cummulate the % across to get overall efficiency.
    Hope the above helps.
    Regards,
    Vivek

  • Mass change of Production Orders status from TECO to CLSD

    Hi All,
    I want to do mass change of Production Orders status from TECO to CLSD. could you tell me is there any t-code by which i can mass change Production orders status from TECO to CLSD. I want Production Orders to be closed, so that further confirmation shouldn't be done for these Production Orders. please let me know the solution.
    Regards,
    Ram

    Hi Girish/Dogboy,
    I can set the status 'Complete' if Order is fully confirmed/fully delivered. When ever i run COHV for partially confirmed/delivered Orders, i get error log saying 'Balance of ORD................ is not zero'. Actually we have lot of Production Orders, where there may be Production Orders released only, partially confirmed etc. so i want them to be closed once for all.
    Regards,
    Ram

Maybe you are looking for

  • I need to add a new 2811 MGCP

    I have a clouster 4.1.2 and need to add a new office (external)which has a independient numeric plan. Some body can refresh me the rigth flow to configurate, becouse I was think: 1.- Add Gateway to CCM clouster 2.- Add a new translation patern to off

  • How do I disable awesome bar in Firefox 4?

    Hi, I would like to know how to disable the awesome bar for firefox 4. I didn't like it in FF3 and don't want it now and cannot find to disable it yet.

  • How to export chapter screenshots for printing?

    My office is working up a large collection of DVDs in Encore. As part of the job, our manager wants DVD cases that display thumbnails of the poster frames located at each chapter stop (chapters are set as automatic intervals in Encore). She saw that

  • How do I remove something from reading list?

    Stuff keeps multiplying in my reading list. How do i get rid of it?

  • HT2506 How can I open uscis.gov/files/form/n-400.pdf with Preview?

    Problem (A) When I try to open some PDFs, such as uscis.gov/files/form/n-400.pdf with OS X Preview, I get the error message: "Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be