Production Order Type Configuration
Hello All
While doing customizing for production order types i.e. OPL5 transaction we have come across "Release Versions". Can you let me know the relevance of the same?
Regards
Hary
Hi Hary,
A production order passes through different events, most common of them are
Production order (Create, Change, Release),
Confirm operation(- Partial confirmation, - Final confirmation)
Confirm production order:(- Partial confirmation (for first confirmed operation),- Final confirmation (for last operation final confirmation))
Goods receipt posting for order:(- Partial delivery, - Final delivery)
Goods issue
etc,.
The release version is the version at the time of the release of events.
If production orders are changed quite often during your work, the target and actual values will align more and more so that the target/ actual deviation will no longer be correctly calculated. By using the release versions, you can counteract this problem.
The level of details are defined by header, item & operation.
Hope it helps
Regards
Santanu Dawn
Similar Messages
-
Production order type dependent parameters
Dear Frndz,
plz help me out with the various parameters which can be set based on the production order type. and the step by step procedure to configure the same.
Regards,
Srini.Hi,
Pls. find the step by step procedure as below :
Define order type-dependent parameters
In this step, you define the parameters that are valid for each order type and plant. The parameters are split up as follows on the tab pages:
Planning
Master data
Here, you define the data that influences master data selection or order master data maintenance:
You can decide whether production versions are selected automatically or manually.
The task list application is predefined as 'P'. However, you can also specify an additional task list application.
The routing selection ID defines, for example, the ranking order for routing selection.
Routing selection defines whether routings are to be selected and if so, how (manually or automatically) and whether reference operation sets can also be selected.
Alternative sequences and sequence exchange define whether alternative sequences are permitted and how the sequences are to be exchanged.
The task list type defines which routing type is permitted for production orders.
Operation dtl check defines whether operation detail screens are to be checked when the operations are transferred to the order.
Routing text defines that the text from the routing header is copied into the order.
You can activate the entry tool for operations to help you when you create operations.
BOM application defines how the BOM alternatives are to be automatically selected.
Search procedure defines how batch determination is to take place.
General
Substitute MRP controller/substitute production scheduler are proposed when you create production orders if an MRP controller or production scheduler are not specified in the material master, or if there is no reference to material.
Reservation/Purch. req. specifies whether certain order objects (operation, components) are relevant to MRP.
Collective purch.req. enables collective purchase requisition per order for externally processed operations or non-stock items.
Inspection type defines how a quality inspection is to be carried out.
Implementation
Status change documents
Here, you define whether you want change documents to be written if a status change occurs. You also define the level at which the change documents are to be written.
A status change document contains the following:
which status has been changed
who changed the status
whether the status has been activated or deactivated
the transaction in which the status change has been carried out
In the production order, you can define the status at the following levels:
order header level
operation level
material component level
production resource/tool level
Status change documents can also be defined independently of each other, at each of these four levels.
Note
If you have defined these parameters such that status change documents are written for a particular order level, the SAP System only writes a status change document for a status change from this point in time if the order (or operation/component/PRT) has been created since the status change documents have been activated.
Shop Floor Information System
You can specify, for example, whether order data is to be stored in the Shop Floor Information System. You can carry out reports using this system, for example, for materials, orders and work centers.
Documentation of goods movements
Here, you can specify that goods movements are to be documented with reference to an order. Then you can display goods movements, for example, using the order information system.
You can enter a profile for displaying documented goods movements on the tab page "Display profiles".
PDC
PDC active allows data to be exchanged with a PDC system.
Workflow
Workflow for PO chg. defines that a workflow is generated when quantities or dates that affect existing purchase orders are changed in the order. In addition, a default rule for the split is displayed on this screen.
So that this indicator is also valid for production orders the appropriate settings must be made in Customizing for the Project System.
Progress determination in orders
You can determine that progress values are calculated for order progress reports.
Controlling
Controlling
Here, you define the parameters relevant to controlling, such as, for example, costing variants for planned and actual costs and a results analysis key.
Distribution rule
Default (distribution) rule defines an automatically generated distribution rule for CO settlement.
Display profiles
Collective order display
Graphics profile defines how the collective order is to be displayed.
Graphic:
Here, you define parameters for displaying graphics of operations and sequences in the order.
Missing parts list
ProfMissPrtsLstOrdNo/PrfMissPrtLstCollOr defines how the missing parts list is to be displayed.
Documentation of goods movements
Goods movements defines which profile is used for displaying documented goods movements.
Activities
Create the necessary parameters for the order type.
HOpe this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Oct 1, 2008 6:35 AM -
Error Message for new production order type
I have created a new production order type and gone through all the configuration requirements that I'm aware of. In testing this new order type, I get an error message in transacion CO02 when selecting the printer icon. The error is as follows:
No reference document type defined for order type ZRWK
Message no. CO179
ZRWK being the new order type.
I've searched through many posts and found nothing relating to this message. Hopefully someone has encounted this before.
I'm sure I've missed something, but can't pinpoint what it is.
Help is greatly appreciated.Bob, did you check your print parameters?..Maybe you don't have your sap forms..You can check it with Tx. COPI
The path is Print - Print Settings - Configuration Menu.
Diego -
Report for comparing Variances of production order types
Hi All,
I want a report in which i can see variances of production order type wise and can compare that with other types also.
means my input should be as follows
1) Company Code/controlling area
2) Plant
3) Order type 1
4) Order type 2 and so on.......
like wise I want to develop a report.
I have created summerization hierarchy but it show order type wise data.
i want data from multiple order type in a single report.Hi Sachin,
I have attached screenshot for your reference. Please find it. -
How to compare the variances of production order type and get report
Hello All,
I want to compare the variances of production order type wise.
for ex. i want variances of order type PP 01 and PP 02 in a single report.Hi Sachin,
You have to maintain summarization hierarchies to achieve this.
1. Maintain summarization hierachies with hierarchy level - order type in the t.code.KKR0
2. Generate the hierarchy in KKRC
3. Run the report KKBC_HOE
Regards,
Mukthar -
Production order type creation - OPJH
Hi gurus,
At production order type (OPJH) I have created, SETTLEMENT PROFILE as declared u201CSD1u201D
But while creating production order (CO08), SETTLEMENT RULE , u201CAccount assignment categoryu201D as MAT.
To correct this what and where all to be checked ?
Regards,
Ram KrishnaHi ,
KGI2 is the one which you should execute irrespective of whether the scenario is Maek to Stock or Make to Order. This facilitates absorption of those overheads which are related to Production activity.
Overhead run on Sales orders is carried out only to absorb Non production overheads. Check the following if the result is not coming -
Whether are there any overhead keys defined for absorption Non prodn overheds ( Sales Overheads , Admin Overheads etc., ) .
If yes , then whether there are % ages maintained for the respective overhead keys.
Hope this helps.
Regards,
Venkat. -
Planned order to production order type
hi
when ever converting planned order to production order system aumatically picks production order type pp01 from MRP group assignment. if i not assigned mrp group in material master means, how the system picks production order type. I think its pick from strategy assignment in order type?????
thx in advanceHi,
Check with OPPQ..
What is the Planning Strategy you are using??
Regards,
Siva
Check with the Transaction OVZG..(Requirements Classes)..
Depending on the Pl. Strategy you can specify the Order Type here.
Regards,
Siva
Edited by: Siva Kumar M on Jul 25, 2008 3:55 PM -
Determination of Production Order Type when Planned Order is Converted
Hi SAP Expert,
Is there anyway to determine the Production Order type by Sales Order type when the planned order from APO is converted? Currently, all the planned orders converted from APO will be a Normal Production Order.
The requirement as example below:
>> If Sales Order Type = Normal Sales Order, then the converted Production Order type = Normal Production Order
>> If Sales Order Type = Replacement Sales Order, then the converted Production Order type = Rework Production Order
Thanks.
Regards,
Hooi ChiaHi Pascal,
Our requirement is exactly same as yours. Can you please elaborate more on ZXCOXU13? I can see the function module suggested by Santosh in the SAP Note but I couldn't find any details regarding ZXCOXU13.
Thanks.
Regards,
Hooi Chia -
When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar -
Production Order Type In Costing.
Hi Gurus,
i have some Doubts in Costing, i have Run The Ck11n and Released it it is updated in MM Costing View.
1. i have completed All the Production process andAfter the Goods Recipt I tried to settle the Order in ko88.i got error that variance shuold be calluclated before settling the order. then i tried to calluclate the variance for the order there i got error stating no cost collector could be determined, creat cost collector.
then i tried to creat cost collector i got error that the order type is ctegory 10 it is not suuported to cost cgange catogiry 05.
1. sap standard order type pp01 holds category 10. then why systm is not allowing to create cost collector for pp01?
2. is it mandatory to use order category 05 if we want to use costing for the production order type.?
Regards,
Venkat.Venkat,
You do not enter a production version in the order. The system cannot assign the order to any product cost collector. To solve this problem you create the order for the production version.
you have defined that the product cost collector is created for the production version. The corresponding product cost collector exists in the system. However, you create the order for BOM and routing.
Follow this link and do the set up first.
Order TYpe for Cost Collector
Thanks
Hrusikesh -
PRODUCTION order material configuration info
HI,
any one please let me know how can i get production order material configuration information.from which table we can get this info or is there any function module
to get this info.
Thanks & reagrds..
Anil.Tcheck this include Program , u will find out list of FMS
<b>LCOOCCUXX</b>
regards
prabhu -
Hi,
I would like to get some information/help on order type configuration for a new controlling area.
Thanks!Here's some config documentation below. To the left beside each config (execution)set up area there is a IMG activity documentation (with eye glasses). Select it and it will tell you about that config area in more detail.
Maintain Settlement Profile
In the settlement profile, you define a range of control parameters for settlement. You must define the settlement profile before you can enter a settlement rule for a sender.
If you want to settle the costs each time to just one cost center or just one G/L account, you need a settlement profile. As you cannot maintain the settlement parameters during settlement to a receiver, you must save the settlement profile either in the order type or in the model order or reference order.
Recommendation
The settlement profile includes, among other things, the retention period for the settlement documents. You should bear in mind the following when you determine the retention period.
The settlement documents take up additional storage capacity. When a posting period is finally locked against further postings in Financial Accounting and Controlling, you can clear the settlement documents. However, you should build in a safety margin, as you will need the settlement documents if you have to cancel any settlements or repeat the period end close.
Activities
1. Create a settlement profile.
2. Save the profile in the order type.
Additional Information
For more information on this subject, go to the R/3 Library and choose AC - Financials -> CO - Controlling -> Internal Orders - > CO Settlement. -
Dear Friends,
In my case Production scheduler and Production scheduling profiles are activated. Based on this system is selected the production order type.
But the problem here is... some times users are selecting some input (which is not as per the sch. profile) during the order creation in CO01. So based on this system is selecting the order type... instead of basing on scheduling profile. So I want to restrict it. Please let me know how can I do it?
Regards.Hi..
My problem is ...
I have already maintained these in the SPRO.
I want to restrict the manual entry. System should not take the order type input. It should take based on the scheduling profile only... System should not consider the manual order type ... if the manual order type is not matched... then system should throw an error. I hope there is no other way... except by using the user exit: PPCO0001
If there is any other way, please let me know.
Regards. -
Check Production Order Type CO01
Hi,
I need to check the "production order type" when creating a manual production order via CO01.
The Ordertype is connected to the MRP planner, Planning profiles, Materialgroup ...I would like to set a message when entering the wrong type.
Thanks for help in advance.
Kind regards
MichaelaMichaela,
You are right.This is the one that i was referring to.You would need to have the help of a developer to implement this functionality though. Basically, the header fields of the order( structure CAUFVD) are availble for you to do your custom validations. If it doesnt satisfy your checks, you will have to raise a error message indicating the appropriate error and also mark the export parameter "NO UPDATE" With some value(For ex: X). I am sure you would have seen the documentation of the same, if not ..here is a copy of the same..
Short text
User Exit for Checking or Changing Header Fields During Order Maintena
Functionality
This customer exit makes two functions possible:
Changing data in the order header. For this purpose, the order header with the changed data can be transferred back to the calling program as export structure HEADER_EXP. The calling program then saves the data.
Checks that prevent the order being saved or changed. For this, the export parameter NO_UPDATE must be set to a non-initial value. The calling program then branches back to online processing. If data in the order header is changed and the parameter NO_UPDATE is set at the same time, then the changed data is adopted nonetheless. The data is thus available in online maintenance.
Notes
Note that the data that is transferred from the customer exit in the export structure of the order header is no longer checked by the system. The person who uses the customer exit is therefore responsible for data consistency!
There are also fields that cannot be changed in the customer exit since they are reentered later in the program.
These include: the creator of the order, the last person to change it, the creation date and the change date. Also, when the order is created there are various number fields that are still filled with temporary numbers. These include; the order number if the system is working with an internal number assignment.
Hope this helps...
Thanks
Narasimhan -
Restrict Production Order type to Production order transaction
We have multiple Production order types. We would like to associate order type to order create transaction codes. For example Order type PP01,PP02 to transaction CO01 and order type say XYZ to transaction CO07.
The reason for doing this is to lock down users from creating material Production orders using CO07 and non-material orders using CO01.
Any feedback will be appreciatedHi Ramesh,
from your number of posts, I gather you're rather new to SDN.
The reason why someone asked if this is a suggestion or a comment is that this part of the forum is intended for suggestions and comments only.
I suggest you click this link: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums</a>
And search for a forum which suits you.
Kind regards, Rob Dielemans
Message was edited by:
Rob Dielemans
null
Maybe you are looking for
-
I have installed and uninstalled I tunes multiple times and have tried all of the "solutions" on this page multiple times without success. Itunes will NOT launch no matter what I do. NOT happy about spending several hundred dollars for iphone and h
-
TOC slide bar/scroll bar not showing on iPad
Captivate 8 HTML5/SWF output with scalable HTML content iPad Safari Desktop Safari and FireFox Hello. We've noticed that the TOC slide bar/scroll bar is not displaying via iPad. It does show Desktop via Safari and FireFox. Is there a setting we hav
-
I am using WebLogic Server 7.0 SP1 with the iPlanet 4.1 WebLogic Plugin. When I do a HTTP Post from my java applet using URLConnection, I am getting the following error from the plugin: [20/May/2003:11:19:13] f
-
Error while opening Dashboard Builder
All, I got an unexpected error in InfoView while trying to open 'My dashboards'. Before I have created and saved successfully several Dashboards in that area. The error code displayed is: (EPM 03007) AA2209 and (FWB 00008) Based on this I checked in
-
Can you have PXIe 1062Q turn on without using the power button
I am using a PXIe-1062Q for a test project that will be inside of a protective case. The power button to the chassis will be covered by a plate on the protective case that will make it annoying and difficult to power on using the power button on the