Production planning with resource constraint in APO

Hi All,
Could you please share some documents on " Production planning with resource constraint in APO" or
If possible,kindly proivde some business scenario with the above concept and and its sequence steps.
Regards
Vel

Hi Velavan,
You may refer to the related links below on SAP Library, please navigate further in the menu which appear in these links to get details on sub-topics.
http://help.sap.com/saphelp_ewm70/helpdata/en/a5/8b623c8a6da167e10000000a11402f/content.htm
https://help.sap.com/saphelp_scm70/helpdata/en/4c/6af71b832821d1e10000000a42189c/frameset.htmHi
You may also refer to the standard SAP PPDS book SCM 250 for more information.
Regards,
Umesh

Similar Messages

Production Quantity with Resource Consumption - 9ASPROD

Hi ,
Could anyone please tell me how keyfigure 9ASPROD - production(total) which is assigned to keyfigure function 6003 (Production Quantity with Resource Consumption ) is calculated .
We can view this keyfigure in Capcaity check Data view of planning book 9ASNP94.
Thanks in Advance.
Regards,
Srini

Hello Srini,
It calculates in this way: operation end date on production resource +
GR processing time.
The best regards,
Michel Bohn

Intergration of Production Planning with Plant Maintenance (SAP Modules)

Our SAP Implentation Consultants are creating work centres in Production Planning which are different to the workcentres in Plant Maintenance as follows.
Work Centres in PP
Mixing
Blowing
Filling
Packaging
Work Centres in PM
Mechanical
Electronics
Electrical
My observation is that in PM the work centres should be identical to PP work centres. whereas Mechanical, Electronics and Electrical should be configured as divisions or departments. The idea is that by having PM WC identical to PP WC the costing will be simplified.
looking forward to expert's advices, please
Amjad

I am locking this thread in PI forums. Ask your question under SAP Solution forums
/community [original link is broken]
Regards,
Prateek

BW Production Planning Implementation Routines?

hi all,
We are going for PRODUCTION PLANNING with BI7.0 Implem. any related docs info?. the best practices and the routines used to enhance the data sources?
later we are planning to implement PP with APO.
PL provide me any related docs for the same?
reg
vadlamudi

Hi,
Business content of PP are available in the link below.
http://help.sap.com/saphelp_nw70/helpdata/en/79/0a383fdb800804e10000000a114084/frameset.htm
Thanks,
Arun

Planning with commercial capacity reservation

Hello
I saw in the SCM2007 enhancement that it is possible to plan with resource capacity reservation based on commercial charactéristics.
Where can I find documentation about these settings and master data associated?
Thanks in advance for your support
regards
patrice

Refer SAP note 1084829/ 1155902/1158403 /1237623
hope this gives you a clear picture of this funtionality.
I have myself used this funtionality so if you have any query pls ask me
Warm Regards
Vaibhav Sareen

How can link the accosaries requirements with production planning

"I am in cable manufacturing here i have a problem in accessories requirements ( dies,Nozzles,Rollers,Embossing wheels etc )link with production planning,at the time of production than these material required for production Can any body tell me how to link this ,accessories is not consubles "
Thanks,
Anurudh singh

Yes you can use PRT for these requirments,
Logistics - Production Process - Master Data - Production Resources/Tools - Production Resources/Tools - Equipment - Create.
spro->production planning for process industries->master data->production resources/tools (PRT)
you will see 5 transactions to configure your settings:
-define PRT auth.grps
-define PRT status
-define Task List Usages
-define PRT Group Keys
-Define Overview Variant for Where-Used List/Mass Replacement

Use of ECC planningtime fence when planning with APO SNP

I am using SAP ECC for execution, and SAP APO SNP heuristics for planning.
So, for a product planned in APO, the MRP type in ECC is X0.
So, as there is no MRP planning in ECC for such a product, what is the use of the ECC planning time fence? I think it becomes redundant in ECC - yes? In fact, I do not see it in the stock reqs list (MD04).
So, in ECC, all that 'planners' can do is to manually reschedule planned/production orders - yes?
Any shortage alerts will only be visible in APO - yes?
Thanks for any advice on this...

Hi
Please find below the answers from my side.
Two questions in my mind...
So, if MRP type = X0 in ECC, the planning time fence is not seen in MD04.
First of all, we should not have any planning time fence in ECC, as it is not adding any value for products with MRP type X0. Yes in MD04 we can not see it.
2. How can ECC users easily distinguish between planned orders which are in the 'short term' from those which are beyond the SNP production horizon?
I think they have to use APO alerts. I think that should be right approach as APO is leading planning tool.
Thanks
Amol

What are the Key Growth Drivers with both quantitative and qualitative analysis [geographical expansion, product, software development, resourcing, etc,]in SharePoint domain?

What are the Key Growth Drivers with both quantitative and qualitative analysis [geographical expansion, product, software development, resourcing, etc,] in SharePoint domain

Bravo. And your point is?

APO production planning(PP)

HI everyone,
Pls if anyone have good documents on APO PP(production planning)& SNP, can mail to my id at [email protected]

hi lilly ,
I got documents on DP,SNP from u.But i am looking PP.can u send on PP pls.
Thanks,
Sreeni..
Message was edited by: sreeni
Message was edited by: sreeni

Planning with APO

Hi Everyone,
I have a question regarding APO and BI Integrated Planning. If we are using APO DP is it a good option to implement BI Integrated planning as well. because both of them have the same planning and forecasting strategies. Is BI Integrated Planning and alternate option for APO DP or can it be used along with APO DP for planning on certain reports. Thank you very much for your time.
Edited by: akshay27 on Oct 14, 2009 8:30 PM
Edited by: akshay27 on Oct 14, 2009 8:39 PM

Hi Akshay27,
I have personnally never use the BI integrating planning, but based on my knowledges; hopefully somebody with more experience in this area will be able to complete this answer!
Integrated planning indeed allow to realised more and more planning using BW infrastructure. The very big advantages is the user friendliness.
However this does not exclude the use a DP. Both can be use together, for example DP for your power user and integrated planning for collaboration. DP will be the "master system" enabling you to maintain CVC, run complex statistical forecast, validate foecast.
(I have seen a simialr implementation a couple of year ago using BPS).
Note for exaple that the new functionality "customer forecast management" in SCM 7 use both DP and IP.
You mentioned the possibilty to perform statistical calculation in IP... I haven't actually seen that, but I am not convince you will have the capacity of DP (seasonal planning, promotion, like profile... MLR, POS forecast...), If you know more, please let me know.
I hope this help a bit; now if somebody could provide more information about IP, that would be great!
Thanks and Regards
Julien

New Products Lunch - Planning with Planning Material

Hello All
WE Plan we planning material (strg 63).
Each finish good is assigned to a planning material and in each planning material we maintain parameters like consumption mode and consumption periods.
For products current in production this strategy works fine, but for new finish goods that are not yet in production the ,confirmation is a challenge.
Imagine a planning material that contain both types of materials, in production and a new materials that start production in month 3.
The consumption indicator is 2 (backwards and foreword) and the backward consumption period is 30 days.
if you enter a sales order today and if planning allow he gets confirmed for today even thou production only start in month 3.
Any advice to make sure SAP only confirms after the 3 month even thou planning exists before? and how to make sure that only the planning that is maintained after the production start is considered even thou the backword consumption is define to look back
any comment / suggestion is appreciated
Thanks
PCoelho

hi
In Planning with planning material Planning material means if there is a material which determines the profitability of the company or which is of great importance to the company.
The planning strategy "Planning with planning material" is particularly useful if you have several
finished products with the same main assemblies.
Here, you define a planning material which contains the common assembly and its BOMs.
The planning run is carried out for the planning material which triggers the production and
procurement of the planning material's components.
The sales order for a finished product which refers to the planning material reduces the planned
independent requirements of the planning material and simultaneously triggers final assembly.
When processing the sales order, you can check whether the planned independent requirements
quantities cover the demand (that is, the availability check as a check against the planned
independent requirements).
In the material master record of the planning material, you must enter strategy 60, the consumption
mode and the consumption periods. In the material master records which refer to the planning
material, you must enter the planning material as a reference and strategy 60. The consumption
periods are calculated starting from the planned independent requirements of the planning material.

Is Yosemite compatible with Kodak production planning and workflow software like Prinergy Workflow?

Is the new OS 10.10 system compatible with Kodak production planning and workflow software? like Prinergy Workflow (incl. the Workshop and Workspace user interfaces as well as the ColorFlow and Preps Client) and Prinergy Evo Client,

Steven,
Thank you for your quick reply and information there in. The video is very nice too. Great angles and composition.
So I guess, I'm going to have swap my drive and re-install my OS when the machine arrives.
I'm not going to be able to capture directly to my desktop (due to poratability reasons). So is there I way in Premire CS3 to uncompress the HDV from the camera and store it in my HDD in uncompressed format? I don't mind having to do this extra step each time if the post production experience is going to be better.
I've heard a lot about Aspect HD from you and others here as well as other forums. I'm not very video savvy yet and don't understand a lot of the vocabulary used :). I've been to their website and don't get what their products are supposed to give me either (I guess their audience understands exactly what they are saying).
What I do get is it decompresses the MPEG 2 to saves it to yout HDD for editing purposes. However, I would have thought the Premier Pro CS3 would have that capability as part of the product, no?
I'd also like to use footage that is not HDV as well as photos/images (composits) but still retain the final cut to be HDV quality. Is this possible and if so, what does it do to the editing experience/performance?
Will I be able to output the final cut back to my camera's Mini DV tape (without having to buy Aspect HD)?

Configure & integrate the quality management with production planning

hi,
i know general flow of production planning ,
i dono how to configure & integrate the quality management with production planning . can anyone explain step by step to configure.
with regards,
Elanchi

Hi,
You must define an inspection type 03 and activate it for materail. When you create production order you will have the inspection lot created. you define type of inspection plan in inspection lot type. You will insert an operation in routing og the material. This operation must contain inspection characteristics. use the operation key QM04 with a quality work center.
Inspection process time will be assigned to your production order.
I think you can manage t customise the process from this global definition of the QM process in Production.
Best Regards,
Salih Arslan
SCM Functional Consultant
Zeitine Solution Partners

How to run production planning in APO

Hi gurus,
how to run production planning in APO.
Can u explain me.
prasad

Prasad,
An unfocused question; a similar answer. Try online help for a start
http://help.sap.com/saphelp_scm70/helpdata/en/2a/18dc37c7f2d67ae10000009b38f889/frameset.htm
Best Regards,
DB49

PP/PI (PP-PI (Production Planning for Process)with Repetative Manufacturing

Hi All,
Can anybody explain what is PP-PI (Production Planning for Process Industries) - Repetative manfacturing. What is BW Developers role in this and wht types of Cubes, Extractros etc.
Please suggest me.
Thanks,
KN

Thanks for your replay.
No really I don't like to make the batch mandatory, during the good issue is not feasible inform the batch due to it is not managed in the Process Control System. Due to the behavior of PI_CONS if for batch managed materials the batch is not informed in the message or in the reservation an error is trigger. In the reservation snot feasible inform the batch because in that moment is unknown.
My question is if it is feasible some how have like FIFO batch determination when the process message is processed without creating a custom message.
Thanks in advance

Production planning with resource constraint in APO

Similar Messages

Maybe you are looking for